Community discussions

MikroTik App
 
mudasir
Member Candidate
Member Candidate
Topic Author
Posts: 278
Joined: Tue Apr 29, 2008 3:38 am
Location: Karachi, Pakistan
Contact:

First time config CCR-1036-12G-4S

Sun May 12, 2013 11:01 am

Hi,

Is there any "First time config" article on Wiki for CCR. I have tried almost everything.
Touch is not calibrated I think, because of which I am unable to use the touch screen properly.
Unable to connect to the router using Winbox.
Serial console is also not working.

I am stuck for this.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26322
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: First time config CCR-1036-12G-4S

Mon May 13, 2013 10:02 am

clarify what is not working please. which port did you connect to? what is the error in winbox and in serial console? did you try the [...] button in winbox to search for MAC address of the port?

this is a good first time guide: http://wiki.mikrotik.com/wiki/Manual:First_time_startup
 
mudasir
Member Candidate
Member Candidate
Topic Author
Posts: 278
Joined: Tue Apr 29, 2008 3:38 am
Location: Karachi, Pakistan
Contact:

Re: First time config CCR-1036-12G-4S

Mon May 13, 2013 10:43 am

Hi,

Got it working after doing the RESET.
It will be great if the touch screen comes pre-calibrated.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26322
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: First time config CCR-1036-12G-4S

Mon May 13, 2013 11:06 am

mudasir, touchscreen does come pre-calibrated. maybe something was wrong on your particular device. happy to hear you got it working!
 
User avatar
LatinSuD
Member Candidate
Member Candidate
Posts: 181
Joined: Wed Jun 29, 2005 1:05 pm
Location: Spain
Contact:

Re: First time config CCR-1036-12G-4S

Mon May 27, 2013 2:13 pm

After a reset the calibration of my display is completely wrong, like if it had been flipped 180º.

The upper right corner is swapped with the bottom left corner.
Upper left and bottom right corners work fine though.

After recalibration everything is ok.

Seen that, what the system REALLY SHOULD DO is launch calibration after a reset, or at least have it in the main menu maybe.

UPDATE: Upgraded to 6.0 and now it works fine after a reset.

Who is online

Users browsing this forum: Ahrefs [Bot], andreo, CGGXANNX, cmmike, Google [Bot], sebus46 and 84 guests