Community discussions

 
moly
newbie
Topic Author
Posts: 34
Joined: Tue Dec 06, 2005 3:14 pm
Contact:

Simple queue not working

Mon May 20, 2013 9:37 am

We use one router (x86 ) as an aggregate and on it we follow all traffic.
Make also NAT and Firewall.
Simple queue use in tree mode, in top of the tree, first level is global queue, its parent for all segment queue, with limit of maximum internet capacity like 1024Mbps.
In the second level is segment queue like 10.1.1.0/24 with no limit.
And last level is end user limiting inside the segment queue, like 10.1.1.50 with limit 15Mbps.
If this all queue turn on, lose IP traffic to internal network. To internet is ok. In my case, on this router LAN port have 10.1.250.2/24 and dont ping any other router in backbone. But In neighbors I see this routers.
I try 6rc6, 6rc8, 6rc13, 6rc14, result is same. In older 6 we have problem with kernel panic. In ROS 5.x have unexpectex reboot in 3-10 days. Last functional queue was in 4.17, but dont support new hardware.
Queue export in attachments.

Thanx for help
You do not have the required permissions to view the files attached to this post.
Martin Cerny
chairman of Oslavany.NET
 
skysnet
just joined
Posts: 7
Joined: Wed May 15, 2013 11:47 am
Location: Kirov.VTK

Re: Simple queue not working

Thu Jun 20, 2013 10:14 am

We have the same "bug": created 2 queues with similar ip(example 10.48.0.2/32) and different queue time.
In ROS 5.x work this:

queue simple print where target=10.48.0.2/32
Flags: X - disabled, I - invalid, D - dynamic
0 name="unl11322" target=10.48.0.2/32 parent=incoming packet-marks=""
priority=8/8 queue=PCQ_dest/PCQ_dest limit-at=0/0 max-limit=8192k/8192k
burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s
time=8h-1d,sun,mon,tue,wed,thu,fri,sat

1 I name="unl11322_night" target=10.48.0.2/32 parent=incoming packet-marks=""
priority=8/8 queue=PCQ_dest/PCQ_dest limit-at=0/0 max-limit=16384k/16384k
burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s
time=0s-8h,sun,mon,tue,wed,thu,fri,sat

ROS 6.1 has little changes:
queue simple print where target=10.48.0.2/32
Flags: X - disabled, I - invalid, D - dynamic
0 name="unl11322" target=10.48.0.2/32 parent=incoming packet-marks=""
priority=8/8 queue=PCQ_dest/PCQ_dest limit-at=0/0 max-limit=8192k/8192k
burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s
time=8h-1d,sun,mon,tue,wed,thu,fri,sat

1 name="unl11322_night" target=10.48.0.2/32 parent=incoming packet-marks=""
priority=8/8 queue=PCQ_dest/PCQ_dest limit-at=0/0 max-limit=16384k/16384k
burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s
time=0s-1d,sun,mon,tue,wed,thu,fri,sat
--
Sorry for my poor english :(

Who is online

Users browsing this forum: No registered users and 79 guests