Community discussions

MUM Europe 2020
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

v6.0 released

Tue May 21, 2013 8:06 am

What's new in 6.0 (2013-May-17 14:04):

*) ipsec - added /peer passive option which will prevent starting ISAKMP negotiation
and signifies xauth responder/initiator side;
*) RouterBOARD - default wireless config now includes password - serial number;
*) lte - support YOTA WLTUBA-107;
*) console - fixed crash when variable name was not specified for
*) hotspot - added mac-cookie login method;
http://wiki.mikrotik.com/wiki/Manual:Ho ... MAC_Cookie
*) lcd - show a message when system shutdown is complete;
*) lcd - added Log screen which is accessible through the Main Menu
and shows log messages where action=echo;
*) ipsec - added pre-shared-key-xauth and rsa-signature-hybrid authentication methods;
*) increased max l2mtu on CCR to 10226 bytes;
*) fixed crash on RB1200;
*) fixed bonding - did not work after remove, undo;
*) fixed queues - router could become unresponsive when configuring queues;
No answer to your question? How to write posts
 
User avatar
erebusodora
Frequent Visitor
Frequent Visitor
Posts: 74
Joined: Mon Jan 23, 2012 3:46 pm
Location: Bulgaria

Re: v6.0 released

Tue May 21, 2013 8:23 am

After upgrade from 5.25 to 6.0 PPPoE client disconected after 3 hours on x86. System reboot PPPoE client conect again. Back to 5.25 all is OK.
 
EgyCom
Member Candidate
Member Candidate
Posts: 123
Joined: Thu May 31, 2007 9:47 pm

Re: v6.0 released

Tue May 21, 2013 8:41 am

Bonding with ARP monitoring is not working, disable ARP monitoring or change to MII solve the problem, tested on 750g, 750gl, 1000AH and 1100AHx2
 
PietRetief
newbie
Posts: 34
Joined: Thu Mar 19, 2009 10:58 am

Re: v6.0 released

Tue May 21, 2013 9:26 am

Hi,

I just upgraded from Ros5.25 on a RB433, RB750G, 5Ghz RB711G and SXT

All of them were running firmware 3.07 (that came with Ros5.25), but now the SXT and 711 state that their latest available firmware is 3.02?

Is it safe to run 3.07 on them or should I downgrade to 3.02 for those 2 routers.

Regards.
You do not have the required permissions to view the files attached to this post.
 
Arnold2222
Frequent Visitor
Frequent Visitor
Posts: 54
Joined: Thu Jan 24, 2013 7:48 pm

Re: v6.0 released

Tue May 21, 2013 9:29 am

You mean 6RC15.... for 6.0 it has too many issues

on RB 450G it miss like 4 packages which made my RB unreachable.

I made that firmware "downgrade" on RB 750 works fine
 
uldis
MikroTik Support
MikroTik Support
Posts: 3427
Joined: Mon May 31, 2004 2:55 pm

Re: v6.0 released

Tue May 21, 2013 9:36 am

PietRetief, both firmwares are working ok. We will update to the newer firmware for those boards in next RouterOS release.
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Tue May 21, 2013 9:38 am

You mean 6RC15.... for 6.0 it has too many issues

on RB 450G it miss like 4 packages which made my RB unreachable.

I made that firmware "downgrade" on RB 750 works fine
what packages are missing? when you upgrade, you must upload the packages you need, if you didn't upload them, they will not be installed.
No answer to your question? How to write posts
 
PietRetief
newbie
Posts: 34
Joined: Thu Mar 19, 2009 10:58 am

Re: v6.0 released

Tue May 21, 2013 10:06 am

@uldis, thank you :)

So far so good, wireless links and OSPF are behaving well.
 
Chrisdewit
just joined
Posts: 6
Joined: Tue Mar 06, 2007 12:46 pm

Re: v6.0 released

Tue May 21, 2013 10:21 am

My Simple queues stopped limiting the upload side on all the boards I upgraded to 6.0, Download limit works fine.?
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Tue May 21, 2013 10:23 am

My Simple queues stopped limiting the upload side on all the boards I upgraded to 6.0, Download limit works fine.?
post your queue config. how did you check that they are not limiting? which version did you have before upgrade?
No answer to your question? How to write posts
 
Arnold2222
Frequent Visitor
Frequent Visitor
Posts: 54
Joined: Thu Jan 24, 2013 7:48 pm

Re: v6.0 released

Tue May 21, 2013 10:29 am

You mean 6RC15.... for 6.0 it has too many issues

on RB 450G it miss like 4 packages which made my RB unreachable.

I made that firmware "downgrade" on RB 750 works fine
what packages are missing? when you upgrade, you must upload the packages you need, if you didn't upload them, they will not be installed.

Lets follow this issue in this topic
http://forum.mikrotik.com/viewtopic.php?f=19&t=72860
 
Chrisdewit
just joined
Posts: 6
Joined: Tue Mar 06, 2007 12:46 pm

Re: v6.0 released

Tue May 21, 2013 10:31 am

They were all between 5.18-5.25. All are either 433ah boards or 435G. MY x86 system running ros v.6rc11 also works fine. Its only the 5 or 6 boards I upgraded last night to 6.0 that does this. Check the file attachment, its not showing any upload traffic. all 0
You do not have the required permissions to view the files attached to this post.
 
Chrisdewit
just joined
Posts: 6
Joined: Tue Mar 06, 2007 12:46 pm

Re: v6.0 released

Tue May 21, 2013 10:40 am

Nevermind i've found the problem, its the "everyone" queue at the bottom, when i disable that the uplaod traffic starts running, was just a nice way to check the traffic going out of the board :/
 
oriondotnet
Frequent Visitor
Frequent Visitor
Posts: 65
Joined: Tue Jan 17, 2006 9:27 pm

Re: v6.0 released

Tue May 21, 2013 10:41 am

Address List is not working on CCR

chain=forward action=drop dst-address=10.10.10.10 src-address-list=!ORION
in-interface=sfp1

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
uptime: 17h28m7s
version: 6.0
build-time: May/17/2013 14:04:20
free-memory: 3642.6MiB
total-memory: 3969.0MiB
cpu: tilegx
cpu-count: 36
cpu-frequency: 1200MHz
cpu-load: 0%
free-hdd-space: 905.5MiB
total-hdd-space: 1024.0MiB
architecture-name: tile
board-name: CCR1036-12G-4S
platform: MikroTik
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1723
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: v6.0 released

Tue May 21, 2013 10:47 am

To Chrisdewit:

My guess is you have queue Nr:29 (named "everyone") as parent to all other simple queues.
Am I correct?

To fix your queues change target from 0.0.0.0/0 to 10.5.1.0/24 or specify target as interface name where clients are connected, everything should work normally

Now, lets think - can all the traffic (from and to your clients) can be considered as download from 0.0.0.0/0 ??? Yes, it can!
so nothing is left as upload.
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.
 
lunchboxrts
Member Candidate
Member Candidate
Posts: 144
Joined: Sat Aug 19, 2006 6:40 am
Location: United States

Re: v6.0 released

Tue May 21, 2013 11:03 am

CCR LCD interface list missing names
You do not have the required permissions to view the files attached to this post.
 
DjM
Member Candidate
Member Candidate
Posts: 111
Joined: Sun Dec 27, 2009 2:44 pm

Re: v6.0 released

Tue May 21, 2013 11:36 am

Hello MikroTik team,

is the issue with setting script variable via SMS solved, please?

Ticket#2013010766000731, opened in 01/2013.

Thank you
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8321
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: v6.0 released

Tue May 21, 2013 11:43 am

*) console - fixed crash when variable name was not specified for
for... what?..
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
tinka
Frequent Visitor
Frequent Visitor
Posts: 54
Joined: Wed Dec 02, 2009 5:48 pm

Re: v6.0 released

Tue May 21, 2013 11:50 am

I have upgraded a RB750G and RB2011UAS-2HnD to RouterOS 6.0. I have upgraded the firmware as well to 3.07 (RB750G) and 3.08 (RB2011).

In the upgrade procedure the RB2011 lost it's ip adress. After setting that correctly i can't reach it over it's ip adress either by winbox or web interface.

What is happening ?

(the rb750g works fine)

----

I cleared the configuration and entered the settings again and all is well. At this side however something went wrong with the ip adress.
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6283
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Re: v6.0 released

Tue May 21, 2013 1:12 pm

*) console - fixed crash when variable name was not specified for
for... what?..
erm..
*) console - fixed crash when variable name was not specified for ':global', ':local', ':set', ':for' and ':foreach' commands;
 
Shkrid
just joined
Posts: 17
Joined: Wed Mar 13, 2013 11:06 am

Re: v6.0 released

Tue May 21, 2013 2:51 pm

My Simple queues stopped limiting the upload side on all the boards I upgraded to 6.0, Download limit works fine.?
+1
Simple queues stopped limiting the upload side on the hotspot bridge interface.
CCR1036-12G-4S
Address List is not working on CCR
works fine
Last edited by Shkrid on Tue May 21, 2013 2:52 pm, edited 1 time in total.
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Tue May 21, 2013 2:52 pm

My Simple queues stopped limiting the upload side on all the boards I upgraded to 6.0, Download limit works fine.?
+1
Simple queues stopped limiting the upload side on the hotspot bridge interface.
CCR1036-12G-4S
your configuration is probably wrong, check above solution by macgaiver
No answer to your question? How to write posts
 
Shkrid
just joined
Posts: 17
Joined: Wed Mar 13, 2013 11:06 am

Re: v6.0 released

Tue May 21, 2013 3:05 pm

Only dynamic simple queue
/queue simple print detail 
 8  D name="hs-<HTTP_Auth_IT1>" target=br191 parent=none packet-marks="" priority=8/8 queue=hotspot-default/hotspot-default 
      limit-at=10M/10M max-limit=10M/10M burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s 

/interface bridge print      
 0  R name="br191" mtu=1500 l2mtu=65535 arp=enabled mac-address=XX:XX:XX:XX:XX:XX protocol-mode=rstp priority=0x8000 auto-mac=yes 
      admin-mac=00:00:00:00:00:00 max-message-age=20s forward-delay=15s transmit-hold-count=6 ageing-time=5m 

/ip hotspot print detail 
 0 S name="HTTP_Auth_IT1" interface=br191 profile=Free_10MB idle-timeout=none 
     keepalive-timeout=none ip-of-dns-name=10.0.0.2 proxy-status="running

/ip hotspot profile print detail
 3   name="Free_10MB" hotspot-address=10.0.0.2 dns-name="xxx.xx" 
     html-directory=Free rate-limit="10M" http-proxy=0.0.0.0:0 
     smtp-server=0.0.0.0 login-by=https,http-pap ssl-certificate=cert1 
     split-user-domain=no use-radius=no 
You do not have the required permissions to view the files attached to this post.
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1723
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: v6.0 released

Tue May 21, 2013 3:09 pm

Do you use bridge and "use-ip-firewall" in bridge settings?

Try to disable it and check if it works.
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.
 
Shkrid
just joined
Posts: 17
Joined: Wed Mar 13, 2013 11:06 am

Re: v6.0 released

Tue May 21, 2013 3:14 pm

Yes, it works when "use-ip-firewall" disabled.

How to make that work simultaneously?
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1723
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: v6.0 released

Tue May 21, 2013 3:25 pm

Avoid using simple queues with interface names as "target" and "dst." instead use ip addresses in those options.
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.
 
onnoossendrijver
Member
Member
Posts: 418
Joined: Mon Jul 14, 2008 11:10 am
Location: The Netherlands

Re: v6.0 released

Tue May 21, 2013 3:26 pm

No directly related to 6.0, but will there be a RouterBoot upgrade for the RB600A, with support for partitioning?
Linux/network engineer: ITIL, LPI1, CCNA R+S, CCNP R+S, JNCIA, JNCIS-SEC
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Tue May 21, 2013 3:56 pm

No directly related to 6.0, but will there be a RouterBoot upgrade for the RB600A, with support for partitioning?
RB600 nand is 64mb

Minimum partition sizes:
   32MB on MIPS
   40MB on PowerPC
   48MB on CCR

There is not enough space for two partitions on RB600
No answer to your question? How to write posts
 
willbur
Frequent Visitor
Frequent Visitor
Posts: 58
Joined: Wed May 09, 2012 8:58 am

Re: v6.0 released

Tue May 21, 2013 4:39 pm

I didn't think that 6.0 was out of RC yet.... perhaps MK is pushing it out too early? :(
 
Attila
newbie
Posts: 33
Joined: Sun Mar 18, 2012 1:57 pm

Re: v6.0 released

Tue May 21, 2013 5:52 pm

Dear Normis!

Multicast routing (PIM-SM) same source to different interface still doesn't work in CCR1036.
Same ROS version and same configuration (1. RP, 3. Interface) work like a charm in RB2011.

Please check out the problem.

Attila
 
Moc
just joined
Posts: 10
Joined: Sun Jan 06, 2013 8:47 am

Re: v6.0 released

Tue May 21, 2013 6:01 pm

I didn't think that 6.0 was out of RC yet.... perhaps MK is pushing it out too early? :(
You get to a point where the user based of a RC have tested all they had to test... And it normal that issues are popingup after an RC since the user base who try it going to be very large with lot of particular setup. As with any upgrade between major releases like this, it always good to test in a lab environment before putting in production, so it will allow them to fix the issues that wasn't reported or confirmed in the RC for the user who have specific usages.
 
savage
Forum Guru
Forum Guru
Posts: 1213
Joined: Mon Oct 18, 2004 12:07 am
Location: Cape Town, South Africa
Contact:

Re: v6.0 released

Tue May 21, 2013 6:27 pm

perhaps MK is pushing it out too early? :(
+1 But then again - MT is pretty much known for this behaviour... Just the recent issues I saw in RC14 (not even talking about this growing list)... I'm definately waiting before taking 6.0 anywhere near production.
Regards,
Chris
 
ryan3531
just joined
Posts: 4
Joined: Mon Mar 04, 2013 5:31 pm

Re: v6.0 released

Tue May 21, 2013 7:21 pm

I just upgraded from 6.0rc14 to 6.0 final and found that IPv6 conntrack is not working. None of the rules appear to create state (in the Connections tab in Winbox) and reply packets all hit my default drop rules at the end of each chain, instead of the "accept established/related" rules. This is only happening with the IPv6 firewall; IPv4 conntrack appears to work as it should. I opened a ticket (#2013052166000812) about this and attached a supout file.
 
jozwiak
just joined
Posts: 4
Joined: Wed Nov 24, 2010 2:20 pm

Re: v6.0 released

Tue May 21, 2013 8:34 pm

Problem with IPsec Peer and "Generate policy" Not working.
Downgraded til v6rc13 and it worked again

address=0.0.0.0/0 passive=no port=500 auth-method=pre-shared-key
secret="password" generate-policy=port-override
exchange-mode=main send-initial-contact=yes nat-traversal=no
my-id-user-fqdn="GroupVPN" proposal-check=obey hash-algorithm=sha1
enc-algorithm=3des dh-group=modp1024 lifetime=1d lifebytes=0
dpd-interval=disable-dpd dpd-maximum-failures=3
 
flynaj
just joined
Posts: 1
Joined: Tue May 21, 2013 9:27 pm

Re: v6.0 released

Tue May 21, 2013 9:32 pm

RB751G-2HnD 5.25 Support USB wireless network card(ATHEROS 9271)
But 6.0 does not support,Why?
 
cheeze
Member Candidate
Member Candidate
Posts: 146
Joined: Tue Jul 31, 2012 7:44 am

Re: v6.0 released

Tue May 21, 2013 9:34 pm

Something I noticed about upgrading to 6.0 on x86. It kills all of the queues in queue tree. Once I rebuilt the queues everything else works.

Awesome, thank you Mikrotik :)
 
elmer
newbie
Posts: 40
Joined: Mon Jun 18, 2012 4:02 pm

Re: v6.0 released

Tue May 21, 2013 10:06 pm

Dynamic WDS after reconnect station WDS creates new, no replacement free# of them.
Routerboard upgrade won`t work on all RB from winbox, only terminal.
Wireless works super! Good work MT team! ;)
 
User avatar
promind
Member Candidate
Member Candidate
Posts: 153
Joined: Thu Feb 23, 2006 11:26 am
Location: Rousse, Bulgaria
Contact:

Re: v6.0 released

Tue May 21, 2013 10:34 pm

Hello MikroTik,
Is VLAN working on 6.0 when enabled on x86 Intel PCI-X interface?
It's not working since first 6.x betas were released.
 
User avatar
lcm
Trainer
Trainer
Posts: 57
Joined: Wed Apr 28, 2010 11:56 pm
Location: Brazil
Contact:

Re: v6.0 released

Tue May 21, 2013 10:37 pm

fresh x86 install on virtualbox:

i did a "system reset-configuration", on next boot i got a "no such file or directory" error, image attached.

virtual box related ?
You do not have the required permissions to view the files attached to this post.
Greets from Brazil.

Luiz Claudio Martins Maia
 
User avatar
wulfgard
Frequent Visitor
Frequent Visitor
Posts: 86
Joined: Wed Oct 17, 2012 1:06 pm
Location: France
Contact:

Re: v6.0 released

Tue May 21, 2013 10:56 pm

Hello all

as we can see v6.0 on CCR1036 works fine and smooth in production environment with

- L2MTU 9000
- OSPF
- BGP
- MPLS LDP
- VPLS BGP MTU 1500
- TE TUNNELS

max packet : 300000 per vpls which mean about 170 Mbps duplex for 64 byte and full 1Gbps duplex with 512 bytes at minimum

all setup from scratch to avoid migration issues

a+
Thierry
System and Network Engineer
Mikrotik Trainer - MTCNA MTCRE
Official French Mikrotik Distributor
 
timoid
newbie
Posts: 36
Joined: Tue Jan 01, 2008 8:20 am

Re: v6.0 released

Tue May 21, 2013 11:55 pm

Hello MikroTik,
Is VLAN working on 6.0 when enabled on x86 Intel PCI-X interface?
It's not working since first 6.x betas were released.
I've tested and VLANs do not appear to work in 6.0 on x86.
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8321
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: v6.0 released

Wed May 22, 2013 12:34 am

Something I noticed about upgrading to 6.0 on x86. It kills all of the queues in queue tree. Once I rebuilt the queues everything else works.
kills? or just binds to 'unknown' interface instead of 'global-something'? isn't it because there's no 'global-something' in v6 and there's no 'global' in previous versions?
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
onnoossendrijver
Member
Member
Posts: 418
Joined: Mon Jul 14, 2008 11:10 am
Location: The Netherlands

Re: v6.0 released

Wed May 22, 2013 12:51 am

Hello MikroTik,
Is VLAN working on 6.0 when enabled on x86 Intel PCI-X interface?
It's not working since first 6.x betas were released.
I've tested and VLANs do not appear to work in 6.0 on x86.
I use an Intel DN2800MT board (has Intel NIC onboard). VLANs are working fine.
Linux/network engineer: ITIL, LPI1, CCNA R+S, CCNP R+S, JNCIA, JNCIS-SEC
 
InoX
Forum Guru
Forum Guru
Posts: 1964
Joined: Tue Jan 09, 2007 6:44 pm

Re: v6.0 released

Wed May 22, 2013 1:19 am

SXT lite 5 hang if system/reboot
power cycle needed or watchdog
 
mark
just joined
Posts: 16
Joined: Thu May 09, 2013 6:09 pm
Location: EU, Germany

Re: v6.0 released

Wed May 22, 2013 2:19 am

The first SXT Lite 2 I've grabbed and updated from v6rc14 rebooted over and over again for about half an hour several times. After unplugging its power source entirely it rebooted five times. And yes, I've tried another cable (it didn't make any difference).
If you like what I've posted and want to see more of that, then please say thank you by giving me karma.

Please do not contact me by PM or email.
 
yogii
Member Candidate
Member Candidate
Posts: 148
Joined: Wed Jun 16, 2010 5:38 am
Location: Batam, Indonesia

Re: v6.0 released

Wed May 22, 2013 6:31 am

ROS 6.0 export, print double dir /int pppoe-client.
Image

normal in 6.0rc14.
Image

thank you.
 
timberwolf
Member Candidate
Member Candidate
Posts: 274
Joined: Mon Apr 25, 2011 12:08 pm
Location: Germany

Re: v6.0 released

Wed May 22, 2013 8:02 am

I'm running a testing setup with OSPF and BGP all over L2TP, with 5.25 no problems.
With 6.0 OSPF is behaving quite strange with messages like
may/21 20:27:24 route,ospf,info OSPFv2 neighbor 10.42.1.104: state change from ExStart to 2-Way
may/21 20:28:05 route,ospf,info OSPFv2 neighbor 10.42.1.104: state change from ExStart to 2-Way
may/21 20:29:08 route,ospf,info OSPFv2 neighbor 10.42.1.104: state change from Exchange to 2-Way
may/21 20:29:08 route,ospf,info OSPFv2 neighbor 10.42.1.104: state change from 2-Way to Down
in the logs. I also got a crash on the central router of the setup...

But hey, thats what we are used to with new major releases ;-)
I can't recommend using 6.0 in production as long as there are issues with OSPF.
 
becs
MikroTik Support
MikroTik Support
Posts: 479
Joined: Thu Jul 07, 2011 8:26 am

Re: v6.0 released

Wed May 22, 2013 8:19 am

Hello MikroTik,
Is VLAN working on 6.0 when enabled on x86 Intel PCI-X interface?
It's not working since first 6.x betas were released.
I've tested and VLANs do not appear to work in 6.0 on x86.
promind and timoid,
Could you please send supout.rif files to support@mikrotik.com for research?
 
timberwolf
Member Candidate
Member Candidate
Posts: 274
Joined: Mon Apr 25, 2011 12:08 pm
Location: Germany

Re: v6.0 released

Wed May 22, 2013 8:59 am

NTP Client status isn't reflected in Winbox, always shows stopped although CLI states synchronized, 6.0 on x86
 
themenace
just joined
Posts: 16
Joined: Wed Aug 18, 2010 11:06 am

Re: v6.0 released

Wed May 22, 2013 9:47 am

Upgraded one of my test RB2011's before rollout to customers V6.0 FW 3.08, noticed that it started to drop occasional ping (on LAN) (monitored by dude)
Can see one of the eth interfaces going up and down exactly on the hour (15th minute) in the log
Was previously on 5.25 - no issue
 
Muqatil
Trainer
Trainer
Posts: 574
Joined: Mon Mar 03, 2008 1:03 pm
Location: London - UK
Contact:

Re: v6.0 released

Wed May 22, 2013 10:30 am

I'm brave:
V6.0 on CCR1036 running on core router on top of BGP/OSPF, Queue Tree, Firewall. Everything's working since upgrade. :roll:
Renato Bernardi

skype: medtech5
 
themenace
just joined
Posts: 16
Joined: Wed Aug 18, 2010 11:06 am

Re: v6.0 released

Wed May 22, 2013 10:50 am

Update : Since reverting to 5.25 / 3.07, eth does not drop every 1 hour (on the 15th minute)
Ping does not drop occasional packet
 
Ansy
Frequent Visitor
Frequent Visitor
Posts: 72
Joined: Mon Oct 17, 2011 1:32 pm
Location: Russia
Contact:

Re: v6.0 released - Torch from Simple Queues - wrong Address

Wed May 22, 2013 11:14 am

Please check, from where it picks garbage addresses into Torch when started from Simple Queues?
Image
 
tkgit
Frequent Visitor
Frequent Visitor
Posts: 59
Joined: Sun Dec 23, 2012 8:32 am
Location: Dunedin, NZ
Contact:

Re: v6.0 released

Wed May 22, 2013 12:04 pm

751u2hnd-ROS6-fw.jpg
why?
You do not have the required permissions to view the files attached to this post.
 
maxstel
Trainer
Trainer
Posts: 70
Joined: Fri Jun 18, 2010 1:54 pm

Re: v6.0 released [scan-list]

Wed May 22, 2013 12:08 pm

Sorry guys,
what exactly does it mean this message?
You do not have the required permissions to view the files attached to this post.
Massimo Passerini
STEL S.r.l.
Ferrara - Italy
MikroTik Certified Trainer
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released [scan-list]

Wed May 22, 2013 12:24 pm

Sorry guys,
what exactly does it mean this message?
Don't enter Scan-list with commas. Use the "down arrow" to add more fields. As an alternative, you can make a channel list in the "Channels" section, then use the channel list name in this field.
No answer to your question? How to write posts
 
maxstel
Trainer
Trainer
Posts: 70
Joined: Fri Jun 18, 2010 1:54 pm

Re: v6.0 released [scan-list]

Wed May 22, 2013 12:31 pm

Sorry guys,
what exactly does it mean this message?
Don't enter Scan-list with commas. Use the "down arrow" to add more fields. As an alternative, you can make a channel list in the "Channels" section, then use the channel list name in this field.
Understood! Thanks as always, Normis. Sorry to bother you with such "problems"... ;)
Massimo Passerini
STEL S.r.l.
Ferrara - Italy
MikroTik Certified Trainer
 
User avatar
greek
Member Candidate
Member Candidate
Posts: 111
Joined: Thu Nov 04, 2010 11:37 pm
Location: Russia, 78rus

Re: v6.0 released

Wed May 22, 2013 3:38 pm

Upgrade RB1100AHx2 from 5.25 to 6.0

I see broblem with Bridge between vlan interface and physical interfaces. Arp - ok, dhcp -ok, ping ip on bridge int - Ok, ping thru bridge - NOT Ok.

Downgrade to 5.25 is solving problem. I was testing it 2 times.

More detail try to post in 2-3 days. :(
 
samsung172
Forum Guru
Forum Guru
Posts: 1186
Joined: Sat Apr 04, 2009 3:45 am
Location: Østfold - Norway
Contact:

Re: v6.0 released

Wed May 22, 2013 6:16 pm

6.0 on CCR and X86 (only one tested) still have the vrf issue. ITs 100% CPU, and not even possible to do a /export or supout from the boxes. Is there any solution to the vrf issue, that have been in almost all 6.x versions. ITs impossible to use vrf on CCR, and that is a REALLY bad thing.
 
cheeze
Member Candidate
Member Candidate
Posts: 146
Joined: Tue Jul 31, 2012 7:44 am

Re: v6.0 released

Wed May 22, 2013 7:42 pm

I think I may have found a bug on x86 version of 6.0.

I believe that loopback interfaces (or in this case, a bridge without anything on it) might end up being broken when it comes to adding it within OSPFv3. On my MIPS-BE router (RB751) it works perfectly, but on my x86 router it shows as inactive and down.

Here's my MIPS-BE box:
[<redacted>@STUFF-NETWORK-WAP] /routing ospf-v3 interface> print
Flags: X - disabled, I - inactive, D - dynamic, P - passive
 #    INTERFACE                                                                                                      AREA                                                                                                      COST PRIORITY NETWORK-TYPE 
 0    Ethernet 1/POE                                                                                                 0.0.0.0                                                                                                     20        0 default      
 1  P Loopback 0                                                                                                     0.0.0.0                                                                                                      1        0 default      
 2  P Switching Bridge                                                                                               0.0.0.0                                                                                                      1        0 default  
Here's my x86 box:
[<redacted>@STUFF-NETWORK-EDGE] /routing ospf-v3 interface> print
Flags: X - disabled, I - inactive, D - dynamic, P - passive
 #    INTERFACE                                                                                                      AREA                                                                                                      COST PRIORITY NETWORK-TYPE 
 0    BUILT IN ETHERNET                                                                                              0.0.0.0                                                                                                     20        0 default      
 1 IP Loopback 0                                                                                                     0.0.0.0                                                                                                      1        0 default       
Both are configured identically. However on the x86 box it shows inactive and down. I've restarted the box, reconfigured the IP addresses, restarted the OSPFv3 process and area commands, disabled/enabled the loopback interface and still no go. On the MIPS-BE box it works perfectly. I have sent an email to support@mikrotik.com with the title of "OSPFv3 does not recognize loopback on x86, but it works in MIPS-BE‏" and the corresponding configs/screenshots/supout.rif files. Ticket is 2013052266001006.

Has anyone else experienced this?
Something I noticed about upgrading to 6.0 on x86. It kills all of the queues in queue tree. Once I rebuilt the queues everything else works.
kills? or just binds to 'unknown' interface instead of 'global-something'? isn't it because there's no 'global-something' in v6 and there's no 'global' in previous versions?
Chupaka, I think you're right. I think this is what's actually going on. However when I upgraded my MIPS-BE board, it actually kept everything on queues. Nothing too bad I guess, it's just something I noticed.
 
wildbill442
Forum Guru
Forum Guru
Posts: 1050
Joined: Wed Dec 08, 2004 7:29 am
Location: Sacramento, CA

Re: v6.0 released

Wed May 22, 2013 8:17 pm

Just to confirm...

I've tested Queue Trees / Address lists / PPPoE Server

They all seem to be working fine.

I did a fresh install on a CCR-1036-12G-4S of ROS6.0 and restored a backup file from my production RB1100AHx2 running 5.25.

I did have to make some changes to the packet markings, queue trees, interface/IP bindings, etc.. Due to the change in ROS version and hardware. Also the packet markings had to be rearranged I believe due to the change in Queue Tree structure in ROS6. I was previously marking Download traffic in the Forward chain, I had to move to the Postrouting chain for it to mark and Queue appropriately. Also due to the lack of the old "Global-Type" queues I had to edit the Queue trees for the new "Golbal" queue.

I haven't tested the OSPF features, but others seem to have already confirmed these to be working properly.

This all seemed pretty straight forward to me. There's been some structural changes to RouterOS in v6, so as you should always do, test first before upgrading a production device.
William Burnett
Network Engineer
 
Talyon
just joined
Posts: 1
Joined: Wed May 22, 2013 9:03 pm

Re: v6.0 released

Wed May 22, 2013 9:08 pm

Don't know if anyone else ran into this. I'm on a RB751U-2HnD and the default configuration script does not seem to be present in v6.0
I'm probably way under everyone else's skill level, i had to get into google to get the information below.
So the fact that it's not correctly setting up from scratch really had me in a bind.

[admin@MikroTik] > /system default-configuration print
script:
[admin@MikroTik] >
 
turm
just joined
Posts: 2
Joined: Wed May 22, 2013 9:43 pm

Re: v6.0 released - Hotspot does not work

Wed May 22, 2013 9:53 pm

Today I upgraded my new RB2011UAS-IN to V.6 Then I wanted to build a hotspot. WAN IP was connected and works fine.
I did the setup with the winbox /ip-Hotspot-Servers-Hotspot Setup.
But when i connected a PC to the Hotspot Port, there was no redirectin to the login page. The Computer gets a normal Adress through DHCP.
Then i discovered, that the setup no longer provides the HTML-Files for the Redirection.
Well, I recovered the files from another RB2011 with V5.25. But the redirection still does not work. There seems to be some renaming of the HTML Files inside V.6.

Is that a normal behaviour?
 
hedele
Member
Member
Posts: 338
Joined: Tue Feb 24, 2009 11:23 pm

Re: v6.0 released

Wed May 22, 2013 9:56 pm

I think I may have found a bug on x86 version of 6.0.

I believe that loopback interfaces (or in this case, a bridge without anything on it) might end up being broken when it comes to adding it within OSPFv3. On my MIPS-BE router (RB751) it works perfectly, but on my x86 router it shows as inactive and down.
You need to give your bridge interface an admin-mac-address. It will work fine in OSPFv3 afterwards!
Caveat: It may not work on first try, if it doesn't, assign a different admin-mac-address. You only have to do that once.
 
cheeze
Member Candidate
Member Candidate
Posts: 146
Joined: Tue Jul 31, 2012 7:44 am

Re: v6.0 released

Wed May 22, 2013 10:03 pm

I think I may have found a bug on x86 version of 6.0.

I believe that loopback interfaces (or in this case, a bridge without anything on it) might end up being broken when it comes to adding it within OSPFv3. On my MIPS-BE router (RB751) it works perfectly, but on my x86 router it shows as inactive and down.
You need to give your bridge interface an admin-mac-address. It will work fine in OSPFv3 afterwards!
Caveat: It may not work on first try, if it doesn't, assign a different admin-mac-address. You only have to do that once.
Ho...leee....shiteth...

You sir/ma'am are absolutely spot on. I did not know RouterOS requires this. Holy crap I'm an idiot :( :(

Thank you thank you...

Seems my Cisco then saw this change in the routing table:
STUFF-NETWORK-CORE#
28w0d: IPv6RT[Default]: ospf 1, Reuse backup for FDFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:0/126, distance 110
28w0d: IPv6RT[Default]: ospf 1, Reuse backup for FDFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:8/126, distance 110
28w0d: IPv6RT[Default]: ospf 1, Route add FDFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFB/128 [new 110/21]
28w0d: IPv6RT[Default]: ospf 1, Added path FE80::230:1BFF:FEBE:EB41/GigabitEthernet1/0/1
28w0d: IPv6RT[Default]: ospf 1, Route add FDFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFC/128 [owner]
28w0d: IPv6RT[Default]: ospf 1, Route add FDFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FF20/124 [owner]
28w0d: IPv6RT[Default]: Event: FDFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFB/128, Add, owner ospf, previous None
There we go. We're all good :)
 
mdminfo
just joined
Posts: 11
Joined: Sat Jun 09, 2007 2:27 pm

Re: v6.0 released

Wed May 22, 2013 11:11 pm

Proxy is not working

Image

---
 
User avatar
cbrown
Trainer
Trainer
Posts: 1840
Joined: Thu Oct 14, 2010 8:57 pm
Contact:

v6.0 released

Thu May 23, 2013 2:02 am

Today I upgraded my new RB2011UAS-IN to V.6 Then I wanted to build a hotspot. WAN IP was connected and works fine.
I did the setup with the winbox /ip-Hotspot-Servers-Hotspot Setup.
But when i connected a PC to the Hotspot Port, there was no redirectin to the login page. The Computer gets a normal Adress through DHCP.
Then i discovered, that the setup no longer provides the HTML-Files for the Redirection.
Well, I recovered the files from another RB2011 with V5.25. But the redirection still does not work. There seems to be some renaming of the HTML Files inside V.6.

Is that a normal behaviour?
Hotspot is not working for me either.
C.Brown

cbrown[at]ravenrocknetworks.com
MTCNA - MTCRE - MTCWE - MTCTCE
MTCSE - TRAINER-0179
 
sniggle
just joined
Posts: 14
Joined: Tue Sep 20, 2011 4:17 am

Re: v6.0 released

Thu May 23, 2013 5:26 am

Hey all,

Upgraded to 6.0 from 5.17 without a hitch so far, however the System/Routerboard section of WebFig is all blank now. From what I recall, I was running firmware 2.36 and 2.39 was available but I never bothered to install it. Now I can't see the serial number or anything. If I go into the settings of that section, the dropdown boxes for boot device, CPU freq, etc are all empty. I'm running an RB450G. Any ideas?

Edit for just a couple more details:

The System/Health section is also completely empty, however the System/Resources section properly shows all data. Not sure if this helps. Thanks!

RESOLVED: It was the stylesheets of WebFig v5.17 being cached by my browser, thus not rendering things fully correctly in v6.0. Unsure if the WebFig HTTP server was reporting a 304 on those documents or not, but that could be a slight bug.
Last edited by sniggle on Thu May 23, 2013 8:13 am, edited 1 time in total.
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Thu May 23, 2013 8:10 am

Today I upgraded my new RB2011UAS-IN to V.6 Then I wanted to build a hotspot. WAN IP was connected and works fine.
I did the setup with the winbox /ip-Hotspot-Servers-Hotspot Setup.
But when i connected a PC to the Hotspot Port, there was no redirectin to the login page. The Computer gets a normal Adress through DHCP.
Then i discovered, that the setup no longer provides the HTML-Files for the Redirection.
Well, I recovered the files from another RB2011 with V5.25. But the redirection still does not work. There seems to be some renaming of the HTML Files inside V.6.

Is that a normal behaviour?
Hotspot is not working for me either.
Do you, or have you in the past, used any type of branding package on this device? We have seen a few complaints, but are unable to reproduce it on any router. We tried many times.
No answer to your question? How to write posts
 
djras
just joined
Posts: 11
Joined: Sat May 18, 2013 12:15 pm

Re: v6.0 released

Thu May 23, 2013 8:47 am

Problem with a Graphing of system resources RB-2011LS again.
You do not have the required permissions to view the files attached to this post.
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Thu May 23, 2013 8:52 am

Problem with a Graphing of system resources RB-2011LS again.
what do you have set in the "resource rules" tab?
No answer to your question? How to write posts
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Thu May 23, 2013 9:17 am


Hotspot is not working for me either.
Do you, or have you in the past, used any type of branding package on this device? We have seen a few complaints, but are unable to reproduce it on any router. We tried many times.
We managed to get remote access to one such device. Problem is fixed in v6.1
No answer to your question? How to write posts
 
djras
just joined
Posts: 11
Joined: Sat May 18, 2013 12:15 pm

Re: v6.0 released

Thu May 23, 2013 9:22 am

what do you have set in the "resource rules" tab?
0.0.0.0/0 yes
I tried to write one IP also.

ROS v5.25 type is CPU HDD Memory - Ok.
ROS v6.0rc14 v6.0 type is unknown!
Also I updated firmware 3.07 3.08. The problem repeats.
You do not have the required permissions to view the files attached to this post.
 
vik1988
Member Candidate
Member Candidate
Posts: 235
Joined: Sun Oct 25, 2009 2:18 pm
Location: India

Re: v6.0 released

Thu May 23, 2013 10:06 am

Timberwolf is right.....

OSPF issue is happening with us also...... getting flapped automatically. Downgraded to ROS 5.24...
Vikas Kumar Gupta
If you Like my post then add KARMA
skype- kumarvikas_gupta
 
elmer
newbie
Posts: 40
Joined: Mon Jun 18, 2012 4:02 pm

Re: v6.0 released

Thu May 23, 2013 12:52 pm

After system / reset with one wlan card i have off course ;) one wlan1 interface.
When i plugged another card i have another wlan1... ALIX 1D with RB14 card, license LVL5.
You do not have the required permissions to view the files attached to this post.
 
Rudios
Forum Veteran
Forum Veteran
Posts: 966
Joined: Mon Mar 11, 2013 12:58 pm
Location: The Netherlands

Re: v6.0 released

Thu May 23, 2013 12:59 pm

what do you have set in the "resource rules" tab?
0.0.0.0/0 yes
I tried to write one IP also.

ROS v5.25 type is CPU HDD Memory - Ok.
ROS v6.0rc14 v6.0 type is unknown!
Also I updated firmware 3.07 3.08. The problem repeats.
I experience the same problem, but only on 1 of the two RB2011's I have.
Testing setup with: 2 x RB750UP | 2 x RB750GL | 1 x RB951G-2HnD | 1 x RB2011UiAS-IN
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Thu May 23, 2013 1:03 pm

what do you have set in the "resource rules" tab?
0.0.0.0/0 yes
I tried to write one IP also.

ROS v5.25 type is CPU HDD Memory - Ok.
ROS v6.0rc14 v6.0 type is unknown!
Also I updated firmware 3.07 3.08. The problem repeats.
I experience the same problem, but only on 1 of the two RB2011's I have.
can any of you provide remote access to your device? contact support@Mikrotik.com about ths
No answer to your question? How to write posts
 
Rudios
Forum Veteran
Forum Veteran
Posts: 966
Joined: Mon Mar 11, 2013 12:58 pm
Location: The Netherlands

Re: v6.0 released

Thu May 23, 2013 2:42 pm

can any of you provide remote access to your device? contact support@Mikrotik.com about ths
I've send a mail. What kind of access do you need?
Testing setup with: 2 x RB750UP | 2 x RB750GL | 1 x RB951G-2HnD | 1 x RB2011UiAS-IN
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Thu May 23, 2013 2:45 pm

can any of you provide remote access to your device? contact support@Mikrotik.com about ths
I've send a mail. What kind of access do you need?
full SSH access would be the best. also winbox and web, so we can see the problem. simply make a new user for support, which is in the "full" group. then disable firewall on the internet port, and send us your public IP
No answer to your question? How to write posts
 
turm
just joined
Posts: 2
Joined: Wed May 22, 2013 9:43 pm

Re: v6.0 released

Thu May 23, 2013 2:47 pm


Hotspot is not working for me either.
Do you, or have you in the past, used any type of branding package on this device? We have seen a few complaints, but are unable to reproduce it on any router. We tried many times.
We managed to get remote access to one such device. Problem is fixed in v6.1
I have no rebranding - I bought the Routerboard at Meconet in Germany

But if you wish I can set up an access for you, with a fresh Installation (only WAN is provided)
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Thu May 23, 2013 2:52 pm

turm, like I already said, problem is fixed. you can try pre-release build here:
http://www.mikrotik.com/download/share/ ... 6.1rc1.npk
No answer to your question? How to write posts
 
User avatar
Davis
Frequent Visitor
Frequent Visitor
Posts: 75
Joined: Mon Aug 01, 2011 12:27 pm
Location: Latvia, Riga
Contact:

Re: v6.0 released

Thu May 23, 2013 3:01 pm

Thanks MikroTik for wonderful hardware and software! And congratulations with release! :)

I want to report a bug with IPSec.
After upgrading from 5.25 to 6.0 IPSec VPN (IP over IP tunnel via IPSec in transport mode) stopped to work.
A lot was logged (when enabled ipsec logging), incloding the following:
14:36:40 ipsec,debug fatal INVALID-PAYLOAD-TYPE notify messsage, phase1 should be deleted. 
Solution was to enable default IPSec proposal (which isn't used and was disabled).
 
JonasJ
just joined
Posts: 3
Joined: Wed Feb 01, 2012 11:51 pm

Re: v6.0 released

Thu May 23, 2013 6:01 pm

To avoid any migration issues after update of my RB493AGH, I did clean install via Netinstall, manually configured RB for required configuration.
Jono_MikroTik_6-0_before-reboot.jpg
Works fine, until reboot...

After reboot, external WAN interface is not presented in ARP list table, no ping from LAN to WAN.

DHCP client is still alive and is getting external IP.
Jono_MikroTik_6-0_after-reboot.jpg
Doing Restore from fresh Config file, and again - works fine, but until next reboot...

Switched back to my lovely 5.25

Any ideas?
You do not have the required permissions to view the files attached to this post.
 
garlicbulb
newbie
Posts: 46
Joined: Mon Jul 25, 2011 12:41 am

Re: v6.0 released

Thu May 23, 2013 10:15 pm

Installed 6.0 on RB-750. When to System -> Reset Configuration and reset with "No Default Configuration" not checked. Box came up with no configuration present.

Loaded in a configuration backup from a V5 system and did "Restore". Box died. No link lights whatsoever.

Did a reset using the reset button. Wound up with no configuration present.
 
Deac
newbie
Posts: 33
Joined: Tue Feb 12, 2013 7:21 am

Re: v6.0 released

Thu May 23, 2013 10:47 pm

Bonding with ARP monitoring is not working, disable ARP monitoring or change to MII solve the problem, tested on 750g, 750gl, 1000AH and 1100AHx2
Agree for RB433UAHL also.
While you're working to fix it, bonding code can be temporarily backported from v5.25?
If it's possible.

In my test lab I see a great improvement in the wireless code. Especially for nstreme mode. Great work!
 
biasottocarvalho
just joined
Posts: 10
Joined: Thu Mar 28, 2013 5:44 pm

Re: v6.0 released

Thu May 23, 2013 10:56 pm

Could someone provide me rc14 for CCR1016-12g?
 
User avatar
Stillhard
Frequent Visitor
Frequent Visitor
Posts: 82
Joined: Sun Jun 10, 2012 11:18 am
Location: Banten, Indonesia
Contact:

Re: v6.0 released

Thu May 23, 2013 11:16 pm

Tested 6.1rc1 (05/22/2013) still error in usermanager web-ui (web-ui ignoring timezone setting) - but no problem in cli (/tool user-manager session print)
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2298
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: v6.0 released

Fri May 24, 2013 12:04 am

Hello MT team.
Do you want make an official bug tracker list?

Something like this?
http://bugs.mikrotik-routeros.com/view_all_bug_page.php
Thanks
LAN, FTTx, Wireless. ISP operator
 
bryans2k
just joined
Posts: 21
Joined: Fri Apr 26, 2013 6:10 am

Re: v6.0 released

Fri May 24, 2013 1:00 am

Hi,

CCR1036-12G-4S running GA v6.0

1. I have two static default routes setup.
2. I have a dst-nat setup.
3. I have a netwatch setup to monitor the primary default route.
4. Whenever I reboot the router the netwatch script fails to execute fully when it’s written like it is below. In fact it confuses route ID 0 for route ID 1 as well at times.
5. Whenever I re-wrote it to enable and disable via set [find comment=”Default Route”] disabled=yes the script works as it should.

Down:
:if ([/ping 10.0.0.1 count=2] = 0) do={
/ip firewall nat set enable 0;
/ip route disable 0;
/tool e-mail send to="person@email.com" subject="Gateway Down" body="Pinged out.";
}

Up:
:if ([/ping 10.0.0.1 count=2] = 2) do={
/ip firewall nat set disable 0;
/ip route enable 0;
/tool e-mail send to="person@email.com" subject="Gateway Up" body="Pinged in.";
}
 
BETEPAH
just joined
Posts: 19
Joined: Sat Apr 13, 2013 7:53 am

Re: v6.0 released

Fri May 24, 2013 7:24 am

Router OS on x86 server hardware
6.0rc11 has lot drops on interfaces
6.0rc13 no drops
6.0 have lot drops again
Без имени-1.png
You do not have the required permissions to view the files attached to this post.
 
negge
newbie
Posts: 36
Joined: Fri Jul 10, 2009 11:05 am

Re: v6.0 released

Fri May 24, 2013 9:01 am

I noticed that if the multicast package is installed but the routing package isn't, the Routing menu in Winbox does not have an icon. In fact I'm not sure that installing the routing package fixes it but I suspect it does.

Otherwise everything is fine, glad to see that the queue lockup issue has been fixed!
 
majkel
Frequent Visitor
Frequent Visitor
Posts: 67
Joined: Sat Feb 16, 2013 8:23 am

Re: v6.0 released

Fri May 24, 2013 11:09 am

on 1036 there is no RX Drops.. I have 4 days uptime.
 
stafross
just joined
Posts: 13
Joined: Tue May 09, 2006 7:04 pm

Re: v6.0 released

Fri May 24, 2013 1:18 pm

I have upgraded 2 X Omnitik UPA-5HnD from 6rc14 with Firmware 3.07 to 6.0, all packages were enabled. I then disabled the Hotspot, IPv6 and MPLS packages and rebooted. The routers never came back up again.

Have been trying to do netinstalls on them but it only gets to partition and format and nothing else happens.

Any sugestions?
Last edited by stafross on Fri May 24, 2013 4:08 pm, edited 1 time in total.
 
User avatar
Stillhard
Frequent Visitor
Frequent Visitor
Posts: 82
Joined: Sun Jun 10, 2012 11:18 am
Location: Banten, Indonesia
Contact:

Re: v6.0 released

Fri May 24, 2013 1:32 pm

Tested 6.1rc1 (05/23/2013)
- still error in usermanager web-ui (web-ui ignoring timezone setting) - but no problem in cli (/tool user-manager session print)
- new error, the api service is not functioning
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Fri May 24, 2013 1:34 pm

Tested 6.1rc1 (05/23/2013)
- still error in usermanager web-ui (web-ui ignoring timezone setting) - but no problem in cli (/tool user-manager session print)
- new error, the api service is not functioning
re-download. May 24 build solves API problem
No answer to your question? How to write posts
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1825
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: v6.0 released

Fri May 24, 2013 1:46 pm

Is anyone else experiencing DHCP server not working on v6 x86 ?
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Fri May 24, 2013 1:47 pm

Is anyone else experiencing DHCP server not working on v6 x86 ?
run sniffer files from clients and send to support. we have not yet had any reports.
No answer to your question? How to write posts
 
ok2slc
just joined
Posts: 3
Joined: Sun Jun 17, 2007 10:33 am

Re: v6.0 released

Fri May 24, 2013 2:39 pm

I have a problem with PPP package on RB1000. After some time (about next a day after reboot, tested 2x) I don´t read via Winbox no parameter (PPPoE servers, Secrets, etc.) in PPP besides dynamic Interface. Attempt to remove this interfaces ends timeout. PPP does not even read over New Terminal and API (API for firewall working normally). V6rc14 working fine.

EDIT: In v6rc14 the same problem now :(.

Sorry, my English is not good :(
Last edited by ok2slc on Mon May 27, 2013 9:38 am, edited 1 time in total.
 
morf
Member Candidate
Member Candidate
Posts: 159
Joined: Tue Jun 21, 2011 5:31 pm
Location: Saint-Petersburg

Re: v6.0 released

Fri May 24, 2013 3:03 pm

I've updated the ROS 5.18 x86 -> 6.0 x86
Everything worked, except vlan. Enables / disables the vlan interfaces, nothing helped. Rolled back to 5.18
 
User avatar
Stillhard
Frequent Visitor
Frequent Visitor
Posts: 82
Joined: Sun Jun 10, 2012 11:18 am
Location: Banten, Indonesia
Contact:

Re: v6.0 released

Fri May 24, 2013 3:05 pm

Tested 6.1rc1 (05/23/2013)
- still error in usermanager web-ui (web-ui ignoring timezone setting) - but no problem in cli (/tool user-manager session print)
- new error, the api service is not functioning
re-download. May 24 build solves API problem
OK tested 6.1rc1 (05/24/2013)
- NOT FIXED, still error in usermanager web-ui (web-ui ignoring timezone setting) - but no problem in cli (/tool user-manager session print)
- FIXED, the api service is not functioning
 
giopao
just joined
Posts: 10
Joined: Sat Dec 06, 2008 5:16 pm
Location: Roma, Italy

Re: v6.0 released

Fri May 24, 2013 3:16 pm

Upgrade RB193 from 5.25 to 6.0
not working; wilreless is ok, traffic on ethernet is limited to 500kb/s

Upgrade RB951-2n grom 5.25 to 6.0, seems ok

both downgraded to 5.25

I'll wait next release for other upgrade.
 
stafross
just joined
Posts: 13
Joined: Tue May 09, 2006 7:04 pm

Re: v6.0 released

Fri May 24, 2013 4:16 pm

I have upgraded 2 X Omnitik UPA-5HnD from 6rc14 with Firmware 3.07 to 6.0, all packages were enabled. I then disabled the Hotspot, IPv6 and MPLS packages and rebooted. The routers never came back up again.

Have been trying to do netinstalls on them but it only gets to partition and format and nothing else happens.

Any sugestions?
Because the Omnitik does not have a serial port I am at a loss of what to do to recover these devices and am also not inclined to reboot any more of my devices upgraded to 6.0 as they might also stop working.

Any help from MT or anyone out there will be greatly appreciated.
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Fri May 24, 2013 4:20 pm

I have upgraded 2 X Omnitik UPA-5HnD from 6rc14 with Firmware 3.07 to 6.0, all packages were enabled. I then disabled the Hotspot, IPv6 and MPLS packages and rebooted. The routers never came back up again.

Have been trying to do netinstalls on them but it only gets to partition and format and nothing else happens.

Any sugestions?
Because the Omnitik does not have a serial port I am at a loss of what to do to recover these devices and am also not inclined to reboot any more of my devices upgraded to 6.0 as they might also stop working.

Any help from MT or anyone out there will be greatly appreciated.
Follow the instructions in this document to reset, or to reinstall the device: http://i.mt.lv/routerboard/files/OmniTi ... nD-qg2.pdf
No answer to your question? How to write posts
 
JonasJ
just joined
Posts: 3
Joined: Wed Feb 01, 2012 11:51 pm

Re: v6.0 released

Fri May 24, 2013 5:15 pm

I've updated the ROS 5.18 x86 -> 6.0 x86
Everything worked, except vlan. Enables / disables the vlan interfaces, nothing helped. Rolled back to 5.18
The 493G RB of mine has also vlan, EoIP interfaces (see post above), and might be either vlan, or EoIP interface is still unstabte with 6.0, or combination of them

As far as I remember, EoIP was unstable in 6.xx rc?

I also rolled back to 5.25, and again, works exclusively fine and stable with this version.
 
timberwolf
Member Candidate
Member Candidate
Posts: 274
Joined: Mon Apr 25, 2011 12:08 pm
Location: Germany

Re: v6.0 released

Fri May 24, 2013 5:53 pm

Timberwolf is right.....

OSPF issue is happening with us also...... getting flapped automatically. Downgraded to ROS 5.24...
I couldn't narrow down the cause by now, but it seem to be caused by short lineflaps or packet loss. So be carefull on unstable links.
I am guessing that its either an error in the state maschine or the associated timers.
 
tiggda
newbie
Posts: 29
Joined: Fri Mar 04, 2011 11:07 am

Re: v6.0 released

Fri May 24, 2013 6:27 pm

Seeing v.6 at last is a nice thing, but it seems it was released too early. Anyone else suffering from "/system backup save" issues? The thing is that I had problems with earlier versions of RouterOS (v.5.2x) - it created broken backup files, which could not be restored. The behavior has changed in v.6 - now the backup starts and writes constantly to the nand until it is filled up to 100%. Output as follows:
/system backup save                      
Saving system configuration
Failed to save system configuration backup
action timed out - try again, if error continues contact MikroTik support and send a supout file (13)
I would appreciate any hints on how to solve this.


Thanks,
Lukasz
 
yogii
Member Candidate
Member Candidate
Posts: 148
Joined: Wed Jun 16, 2010 5:38 am
Location: Batam, Indonesia

Re: v6.0 released

Fri May 24, 2013 6:56 pm

Seeing v.6 at last is a nice thing, but it seems it was released too early. Anyone else suffering from "/system backup save" issues? The thing is that I had problems with earlier versions of RouterOS (v.5.2x) - it created broken backup files, which could not be restored. The behavior has changed in v.6 - now the backup starts and writes constantly to the nand until it is filled up to 100%. Output as follows:
/system backup save                      
Saving system configuration
Failed to save system configuration backup
action timed out - try again, if error continues contact MikroTik support and send a supout file (13)
I would appreciate any hints on how to solve this.


Thanks,
Lukasz
what type of routerboard you have tested?

it works fine for my RBSXT-5HnD for backup save and load.
 
tiggda
newbie
Posts: 29
Joined: Fri Mar 04, 2011 11:07 am

Re: v6.0 released

Fri May 24, 2013 9:19 pm

Seeing v.6 at last is a nice thing, but it seems it was released too early. Anyone else suffering from "/system backup save" issues? The thing is that I had problems with earlier versions of RouterOS (v.5.2x) - it created broken backup files, which could not be restored. The behavior has changed in v.6 - now the backup starts and writes constantly to the nand until it is filled up to 100%. Output as follows:
/system backup save                      
Saving system configuration
Failed to save system configuration backup
action timed out - try again, if error continues contact MikroTik support and send a supout file (13)
I would appreciate any hints on how to solve this.


Thanks,
Lukasz
what type of routerboard you have tested?

it works fine for my RBSXT-5HnD for backup save and load.
My problems started while I was still using RB450G, right now I have RB2011UAS-2HnD-IN configured in the same way as on RB450G and the problem is still there.

Thanks,
Lukasz
 
stafross
just joined
Posts: 13
Joined: Tue May 09, 2006 7:04 pm

Re: v6.0 released

Fri May 24, 2013 9:23 pm

I have upgraded 2 X Omnitik UPA-5HnD from 6rc14 with Firmware 3.07 to 6.0, all packages were enabled. I then disabled the Hotspot, IPv6 and MPLS packages and rebooted. The routers never came back up again.

Have been trying to do netinstalls on them but it only gets to partition and format and nothing else happens.

Any sugestions?
Because the Omnitik does not have a serial port I am at a loss of what to do to recover these devices and am also not inclined to reboot any more of my devices upgraded to 6.0 as they might also stop working.

Any help from MT or anyone out there will be greatly appreciated.
Follow the instructions in this document to reset, or to reinstall the device: http://i.mt.lv/routerboard/files/OmniTi ... nD-qg2.pdf
As stated above I have been trying to do a NETINSTALL but the process gets stuck on "Partitioning and Format." the install never starts.
 
HaPe
Member Candidate
Member Candidate
Posts: 232
Joined: Fri Feb 10, 2012 10:24 pm
Location: Poland

Re: v6.0 released

Fri May 24, 2013 11:15 pm

In 6.0, F5 (repaint syntax) in editor doesn't work. To do it, you need to close and open again editor.
In anticipation on new The Dude release.
 
incoming429
just joined
Posts: 16
Joined: Thu Apr 14, 2005 9:34 pm

Re: v6.0 released

Sat May 25, 2013 2:19 am

It would be great if the order of items in the left panel in WebFig was be the same as in Winbox (for example IPv6 in WebFig is now below Log).

Thank you
 
JorgeAmaral
Trainer
Trainer
Posts: 199
Joined: Wed Mar 04, 2009 11:53 pm
Location: /ip route add type=blackhole

Re: v6.0 released

Sat May 25, 2013 2:32 am

Does one-to-one nat in hotspot work for anyone?
I have been testing and it seems to fail in v6.
 
biasottocarvalho
just joined
Posts: 10
Joined: Thu Mar 28, 2013 5:44 pm

Re: v6.0 released

Sat May 25, 2013 3:45 am

Could someone provide me rc14 for CCR1016-12g?
 
infused
Member
Member
Posts: 305
Joined: Fri Dec 28, 2012 2:33 pm

Re: v6.0 released

Sat May 25, 2013 11:24 am

Could someone provide me rc14 for CCR1016-12g?
rc13 is more more stable.
 
andriys
Forum Guru
Forum Guru
Posts: 1192
Joined: Thu Nov 24, 2011 1:59 pm
Location: Kharkiv, Ukraine

Re: v6.0 released

Sat May 25, 2013 12:59 pm

*) ipsec - added /peer passive option which will prevent starting ISAKMP negotiation
and signifies xauth responder/initiator side;
*) ipsec - added pre-shared-key-xauth and rsa-signature-hybrid authentication methods;
GUI support for these features seems to be missing. GUI support for mode-cfg seems to be missing as well. When can we expect these options to be added to Winbox and Webfig?
 
yogii
Member Candidate
Member Candidate
Posts: 148
Joined: Wed Jun 16, 2010 5:38 am
Location: Batam, Indonesia

Re: v6.0 released

Sat May 25, 2013 1:29 pm

Could someone provide me rc14 for CCR1016-12g?
here are the links.
http://download2.mikrotik.com/routeros/ ... .0rc14.zip
http://download2.mikrotik.com/routeros/ ... .0rc14.npk

just change number after "rc" to download minor version.
 
devilwolf90
just joined
Posts: 2
Joined: Sat May 25, 2013 1:19 pm

Re: v6.0 released

Sat May 25, 2013 1:42 pm

Image

Image

Image

Image

limit bytes out not working ............

Image
 
estdata
Frequent Visitor
Frequent Visitor
Posts: 99
Joined: Mon Feb 20, 2012 9:05 pm
Contact:

Re: v6.0 released

Sat May 25, 2013 5:03 pm

I put the wireless-frequsage > kicked and then goes to the router off (disconnect)

this is big problems :(
don't forget to give me karma if got help
....
 
wiltonlee
just joined
Posts: 4
Joined: Sat Aug 13, 2011 2:05 pm

Re: v6.0 released

Sun May 26, 2013 3:23 am

After upgrading to v6 released, the logging time/date is defaulted to GMT although system clock is set to +8hrs from GMT.

Please help..
 
putinka
just joined
Posts: 2
Joined: Sun May 26, 2013 12:28 pm

Re: v6.0 released

Sun May 26, 2013 12:38 pm

My system resource:
[admin@MikroTik] > system resource print                                                           
version: 6.0
build-time: May/17/2013 14:04:20
cpu: MIPS 74Kc V4.12
architecture-name: mipsbe
board-name: RB2011L
What happened to the item "yes" :shock: :
[admin@MikroTik] > ip ipsec peer add generate-policy= 
no  port-override  port-strict
 
estdata
Frequent Visitor
Frequent Visitor
Posts: 99
Joined: Mon Feb 20, 2012 9:05 pm
Contact:

Re: v6.0 released

Sun May 26, 2013 2:12 pm

What is new 6.1RC1 ? i see this demo.mt.lv is coming new release :)
don't forget to give me karma if got help
....
 
putinka
just joined
Posts: 2
Joined: Sun May 26, 2013 12:28 pm

Re: v6.0 released

Sun May 26, 2013 2:17 pm

What happened to the item "yes" :shock: :
[admin@MikroTik] > ip ipsec peer add generate-policy= 
no  port-override  port-strict
port-override == yes
 
aTan
Frequent Visitor
Frequent Visitor
Posts: 52
Joined: Tue Nov 01, 2011 11:55 am

Re: v6.0 released

Sun May 26, 2013 5:00 pm

I just upgraded from 6.0rc14 to 6.0 final and found that IPv6 conntrack is not working. None of the rules appear to create state (in the Connections tab in Winbox) and reply packets all hit my default drop rules at the end of each chain, instead of the "accept established/related" rules. This is only happening with the IPv6 firewall; IPv4 conntrack appears to work as it should. I opened a ticket (#2013052166000812) about this and attached a supout file.
I have the same problem. IPv6 conntrack doesn't work at all.
 
mark
just joined
Posts: 16
Joined: Thu May 09, 2013 6:09 pm
Location: EU, Germany

Re: v6.0 released

Sun May 26, 2013 7:28 pm

I am growing increasingly wary of Microtik's IPv6 support due to:
  • »Bridge-local« doesn't properly get a link-local IPv6 address at boot time resulting in no »router advertisements« being sent to connected hosts, in turn resulting in their IPv6 connectivity loss.
  • Even after deleting a faulty address (faulty as in »assigned to interface ›unknown‹«) a link-local address isn't recreated.
Furthermore:
  • Several different devices, having MIPSBE architecture in common, power up in some sort of reboot-loop. They're becoming inaccessible for minutes, sometimes even hours or quasi-permanent!
  • »bridge-local« still disappears in v6.0 FW 3.08 (RB951G-2HnD — I've removed bridges on every other device therefore I won't rule out the issue exists there, too)
I didn't hear a word from Mikrotik about these issues being addressed.
You do not have the required permissions to view the files attached to this post.
If you like what I've posted and want to see more of that, then please say thank you by giving me karma.

Please do not contact me by PM or email.
 
bartjoo
Frequent Visitor
Frequent Visitor
Posts: 58
Joined: Tue Apr 09, 2013 5:56 pm

Re: v6.0 released

Sun May 26, 2013 10:40 pm

After the installing my RB is rebooting everytime. He never came up.
with hard reset it doesnt work.. every time a reboot in 60seconds..
help me!
 
zamani
just joined
Posts: 10
Joined: Mon May 27, 2013 3:49 am

Re: v6.0 released

Mon May 27, 2013 4:04 am

Hello everyone.
I install routeros v6.0 on my RB911G. with winbox. but after reboot my router stop working,boot fail!
I can't access to it with winbox or....
no ip , mac address...
RB911G doesn't have reset button.how can I use netinstall?!
any other way?
 
simpl3x
just joined
Posts: 20
Joined: Thu Apr 19, 2012 5:36 pm

Re: v6.0 released

Mon May 27, 2013 7:49 am

Hello everyone.
I install routeros v6.0 on my RB911G. with winbox. but after reboot my router stop working,boot fail!
I can't access to it with winbox or....
no ip , mac address...
RB911G doesn't have reset button.how can I use netinstall?!
any other way?
you can try use reset ring on board:
1.jpg
You do not have the required permissions to view the files attached to this post.
 
yogii
Member Candidate
Member Candidate
Posts: 148
Joined: Wed Jun 16, 2010 5:38 am
Location: Batam, Indonesia

Re: v6.0 released

Mon May 27, 2013 8:16 am

RB911G doesn't have reset button.how can I use netinstall?!
button in the brown stripped box like in the picture below should be reset button.
You do not have the required permissions to view the files attached to this post.
 
bartjoo
Frequent Visitor
Frequent Visitor
Posts: 58
Joined: Tue Apr 09, 2013 5:56 pm

Re: v6.0 released

Mon May 27, 2013 9:01 am

Hello, the reset button and jumper doesnt work for me.
How can i use netinstall? I dont have a com port
On the mikrotik 951g. And he reboots every time, so i dont have time to logon

update:
it works:)
http://www.mikrotik.com.my/reinstalling ... rial-port/
 
SoKaR
newbie
Posts: 47
Joined: Fri Dec 03, 2010 11:15 pm

Re: v6.0 released

Mon May 27, 2013 2:53 pm

What is new 6.1RC1 ? i see this demo.mt.lv is coming new release :)

What's new in 6.1rc1 (2013-May-27 08:19):

*) api - added support for API over TLS (SSL);
*) api - api service is now enabled by default;
*) ppp - do not show R flag for locally authenticated users;
*) vrrp - fixed ah authentication;
*) webfig - added support for RADIUS authentication (via MS-CHAPv2);
*) ipsec - for peers with full IP address specified system will
autostart ISAKMP SA negotiation;
*) trafficgen - added inject-pcap command for replaying pcap files into network;
*) dns - retry queries with tcp if truncated results received;
 
cast
just joined
Posts: 3
Joined: Tue May 07, 2013 3:47 pm

Re: v6.0 released

Mon May 27, 2013 3:28 pm

in RouterOS 5.xx
/tool email send tls=yes ...
in RouterOS 6.0
/tool email send start-tls=yes ...

WHY ???

Is there any other renamings?
how users can guess this things? only by non-working scripts?
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Mon May 27, 2013 3:54 pm

No answer to your question? How to write posts
 
elmer
newbie
Posts: 40
Joined: Mon Jun 18, 2012 4:02 pm

Re: v6.0 released

Mon May 27, 2013 4:24 pm

My RB435G after firmware update and reboot is unaccessible on all protocol :(
Internet works for now, but dhcp-server not! Must go reboot via power...

Problem resolved, CPU settings gone to 100Mhz... Disable WLAN`s set to normal 680Mhz
then reboot and enable WLAN resolved problem :)
Last edited by elmer on Tue May 28, 2013 10:22 am, edited 1 time in total.
 
User avatar
sealin
just joined
Posts: 10
Joined: Sun Feb 03, 2013 12:58 pm

Re: v6.0 released

Mon May 27, 2013 4:49 pm

Hi,
I setup Ros5.25 & Ros6.0 in different Virtual PCs.
In each Ros, I add 1000 pppoe-client and 1000 routes.
I use scripts below:
As for pppoe-client
:for sheng from=1 to=1000 do={/int pppoe-client
add interface=ether1 name=("pppoe-out" . $sheng) password=1 user=1}
As for Routes
:for sheng from=1 to=1000 do={/ip route
add disabled=yes distance=1 dst-address=0.0.0.0/0 gateway=("pppoe-out" . $sheng) routing-mark=$sheng scope=30 target-scope=10}
At last, I find that either Ros5.25 or Ros6.0 could enable more than 252 routes. If routes do not show reachable or unreachable, they can not be used in mangle.Here are pictures and supout files.
So Is the number of routes limited?
Thanks a lot.
Have a nice day!^_^
You do not have the required permissions to view the files attached to this post.
 
Adolfo
just joined
Posts: 2
Joined: Mon May 27, 2013 6:25 pm

Re: v6.0 released

Mon May 27, 2013 6:32 pm

fresh x86 install on virtualbox:

i did a "system reset-configuration", on next boot i got a "no such file or directory" error, image attached.

virtual box related ?

Same issue on a ccr1016, using two different downloads of npk file.
 
User avatar
Stillhard
Frequent Visitor
Frequent Visitor
Posts: 82
Joined: Sun Jun 10, 2012 11:18 am
Location: Banten, Indonesia
Contact:

Re: v6.0 released

Mon May 27, 2013 7:04 pm

tested 6.1rc1 (05/24/2013) all the way to (05/272013)
- NOT FIXED, still error in usermanager web-ui (web-ui ignoring timezone setting) - but no problem in cli (/tool user-manager session print)
- NEW ERROR, ip > hotspot > active - Session Time Left empty :shock:
 
zamani
just joined
Posts: 10
Joined: Mon May 27, 2013 3:49 am

Re: v6.0 released

Mon May 27, 2013 7:21 pm

thanks simpl3x and yogii.
I can't install v6.0 but v6.1 work for me.
is this (v6.1)stable enough?
if not,can I back to 5.25?
 
paulmuhl
just joined
Posts: 6
Joined: Sun Feb 10, 2013 6:01 pm

Re: v6.0 released - hotspot not working!

Mon May 27, 2013 7:52 pm

I have also a problem with CCR and v6 and still with 6.1.
Hotspot makes redirect to login page, login takes place and user shown as "active" in CCR, also in radius server, but no redirect to status page and no online surfing on other pages possible.
Downgrade to v6 rc13 and everything is working fine.
Also working wirth v6rc14 - but after upgrade to v6 final it is not more working!
 
User avatar
EMOziko
Member Candidate
Member Candidate
Posts: 129
Joined: Mon Aug 23, 2010 9:42 pm
Location: Georgia

Re: v6.0 released

Mon May 27, 2013 8:03 pm

We have v6 on 2 CCR and one x86 in production. Works great! Soon we will add more CCR's.

Hope in next releases, wireless will be priority too.
We want new versions of The Dude!!!!!!!
 
rogeriodj
just joined
Posts: 11
Joined: Thu Mar 07, 2013 3:22 pm

Re: v6.0 released

Tue May 28, 2013 2:50 am

What we have to do to make this work to provide CCR?
Well anyway we tried, it has many problems! Processing high, with almost nothing in it, knocking OSPF ...
You do not have the required permissions to view the files attached to this post.
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1825
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: v6.0 released

Tue May 28, 2013 5:30 am

Is anyone else experiencing DHCP server not working on v6 x86 ?
run sniffer files from clients and send to support. we have not yet had any reports.
Hi Normis, done and logged Ticket#2013052766000123
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
gogusrl
newbie
Posts: 25
Joined: Sat Aug 18, 2012 1:01 pm

Re: v6.0 released

Tue May 28, 2013 9:07 am

I have this problem after I upgraded my 951g-2hnd to v6.0.

Image
 
3bs
newbie
Posts: 48
Joined: Tue Aug 09, 2011 12:33 am
Location: Irkutsk, Russia

Re: v6.0 released

Tue May 28, 2013 9:39 am

multicast package still broken
WBR, 3bs =)
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6618
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: v6.0 released

Tue May 28, 2013 10:23 am

paulmuhl,
check /file print and make sure all HotSpot folders and files are present (run /ip hotspot reset-html to get files on your router).
If files are present, make support output file and send it to support department (support@mikrotik.com).
 
Rudios
Forum Veteran
Forum Veteran
Posts: 966
Joined: Mon Mar 11, 2013 12:58 pm
Location: The Netherlands

Re: v6.0 released

Tue May 28, 2013 12:33 pm

I have this problem after I upgraded my 951g-2hnd to v6.0.

Image
Has been mentioned before, MT support has been busy on my router, but it is not yet solved.
Also unfortunately I did not yet hear something back from them.
Testing setup with: 2 x RB750UP | 2 x RB750GL | 1 x RB951G-2HnD | 1 x RB2011UiAS-IN
 
dxman46
just joined
Posts: 2
Joined: Tue May 28, 2013 1:03 pm
Contact:

Re: v6.0 released

Tue May 28, 2013 2:01 pm

1-i am using MikroTik Router as LoadBalancer.4 WAN and 1 LAN for Private Network.
i am trying to connect my Windows VPN with my Remote site.
if i connect it directly with any WAN Source (bypassing Mikrotik),it connects perfectly without any time delay but when i try to connect with my remote site (via Mikrotik) , sometimes it takes lot of time and time out and sometime it connect without any time delay , can you guide me any setting that needs to b added in configuration of Mikrotik then reply me.
same is the case with Cisco VPN Utility .
if i connect 2 WAN sources with Mikrotik Router , it works fine , but as i connect 3rd WAN Source , it start creating problems like sometime it connects instantly and most of the time it takes lot of time
Please Acknowledge ASAP
2-i want to upgrade my MikroTik Device
how can i upgrade and what about the license ? is license required after up-gradation.

Image
Image
:?
 
wpeople
Member
Member
Posts: 352
Joined: Sat May 26, 2007 6:36 pm

Re: v6.0 released

Tue May 28, 2013 3:56 pm

Using RB493G with 2 wireless cards (wlan1 and wlan2). Both in AP mode, with 1-1 wds station connected.
When I select a new channel for wlan2, wlan1 disconnects as well. Of course, there is a big spacing between channels (100+ MHz)

both cards are running in 802.11-N and nv2, dual chain.

Anyone meet this? Or can reproduce?
(i've not met with this while running 5.x)
 
uldis
MikroTik Support
MikroTik Support
Posts: 3427
Joined: Mon May 31, 2004 2:55 pm

Re: v6.0 released

Tue May 28, 2013 4:06 pm

Using RB493G with 2 wireless cards (wlan1 and wlan2). Both in AP mode, with 1-1 wds station connected.
When I select a new channel for wlan2, wlan1 disconnects as well. Of course, there is a big spacing between channels (100+ MHz)

both cards are running in 802.11-N and nv2, dual chain.

Anyone meet this? Or can reproduce?
(i've not met with this while running 5.x)
please enable the wireless,debug logging, reproduce that and paste the log entries.
 
yogii
Member Candidate
Member Candidate
Posts: 148
Joined: Wed Jun 16, 2010 5:38 am
Location: Batam, Indonesia

Re: v6.0 released

Tue May 28, 2013 5:13 pm

thanks simpl3x and yogii.
I can't install v6.0 but v6.1 work for me.
is this (v6.1)stable enough?
if not,can I back to 5.25?
of course you can. but i recomend to downgrade "rc" version.

hello MT Support,
yesterday my RB951-2n suddenly reboot when i tested to transfer data over wireless with routing mode and no BW limitation. this may be causing bottleneck and rebooted the RB. is it normal?

thank you..
Last edited by yogii on Tue May 28, 2013 5:36 pm, edited 1 time in total.
 
uldis
MikroTik Support
MikroTik Support
Posts: 3427
Joined: Mon May 31, 2004 2:55 pm

Re: v6.0 released

Tue May 28, 2013 5:25 pm

tested 6.1rc1 (05/24/2013) all the way to (05/272013)
- NOT FIXED, still error in usermanager web-ui (web-ui ignoring timezone setting) - but no problem in cli (/tool user-manager session print)
- NEW ERROR, ip > hotspot > active - Session Time Left empty :shock:
Please redownload the new test release and check again.
 
User avatar
sealin
just joined
Posts: 10
Joined: Sun Feb 03, 2013 12:58 pm

Re: v6.0 released

Wed May 29, 2013 2:25 am

Hi,
I setup Ros5.25 & Ros6.0 in different Virtual PCs.
In each Ros, I add 1000 pppoe-client and 1000 routes.
I use scripts below:
:for sheng from=1 to=1000 do={/int pppoe-client
add interface=ether1 name=("pppoe-out" . $sheng) password=1 user=1}
:for sheng from=1 to=1000 do={/ip route
add disabled=yes distance=1 dst-address=0.0.0.0/0 gateway=("pppoe-out" . $sheng) routing-mark=$sheng scope=30 target-scope=10}
At last, I find that either Ros5.25 or Ros6.0 could enable more than 252 routes. If routes do not show reachable or unreachable, they can not be used in mangle.Here are pictures and supout files.
So Is the number of routes limited?
Thanks a lot.
Have a nice day!^_^
 
User avatar
Stillhard
Frequent Visitor
Frequent Visitor
Posts: 82
Joined: Sun Jun 10, 2012 11:18 am
Location: Banten, Indonesia
Contact:

Re: v6.0 released

Wed May 29, 2013 7:17 am

tested 6.1rc1 (05/24/2013) all the way to (05/272013)
- NOT FIXED, still error in usermanager web-ui (web-ui ignoring timezone setting) - but no problem in cli (/tool user-manager session print)
- NEW ERROR, ip > hotspot > active - Session Time Left empty :shock:
Please redownload the new test release and check again.
tested 6.1rc1 (05/28/2013)
- NOT FIXED, still error in usermanager web-ui (web-ui ignoring timezone setting) - but no problem in cli (/tool user-manager session print)
- FIXED, ip > hotspot > active - Session Time Left empty
- NEW/OLD ERROR, ip > hotspot > active - Tx Rate stays in 0 bps :shock: :lol:
 
User avatar
ringlet
newbie
Posts: 35
Joined: Sun Mar 07, 2010 9:24 pm
Location: Gdynia, Poland
Contact:

Problem with long scan list...

Wed May 29, 2013 10:00 am

http://prntscr.com/177ezn

i have 22 channels in my scan list, previously it was in one line , now it is in some kind of matrix and a cant use nothing what is below matrix.
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Problem with long scan list...

Wed May 29, 2013 10:09 am

http://prntscr.com/177ezn

i have 22 channels in my scan list, previously it was in one line , now it is in some kind of matrix and a cant use nothing what is below matrix.
This is normal. It is because in v6 you must use the Channels tab to define a list of channels. Then, in this window, only specify that channel list name.
No answer to your question? How to write posts
 
adiputrasa
just joined
Posts: 2
Joined: Wed Apr 24, 2013 12:24 pm

Re: v6.0 released

Wed May 29, 2013 11:40 am

Hi anyone using v6.1rc1 and success getting snmp? I got a problem after plug CCR with v6.1rc1 my cacti showed snmp error for those CCR Device
 
alexp89
just joined
Posts: 4
Joined: Wed Oct 05, 2011 12:51 pm

Re: v6.0 released

Wed May 29, 2013 12:10 pm

What about the problems with freezing SSH? (On 6.0 x86 accurately present) http://forum.mikrotik.com/viewtopic.php ... 62#p370862
Now ssh freezing causing a collapse of the router.
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8321
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: v6.0 released

Wed May 29, 2013 4:40 pm

So Is the number of routes limited?
not the number of routes but the number of routing tables. to you really have more than 252 different gateways for policy routing?
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
dzieva
Frequent Visitor
Frequent Visitor
Posts: 51
Joined: Fri Mar 25, 2011 4:51 pm
Location: Iguassu Falls, Brasil

Re: v6.0 released

Wed May 29, 2013 6:50 pm

tested 6.1rc1 (05/24/2013) all the way to (05/272013)
- NOT FIXED, still error in usermanager web-ui (web-ui ignoring timezone setting) - but no problem in cli (/tool user-manager session print)
- NEW ERROR, ip > hotspot > active - Session Time Left empty :shock:
PPP Last Logged Out ignoring timezone setting (winbox)
 
User avatar
ringlet
newbie
Posts: 35
Joined: Sun Mar 07, 2010 9:24 pm
Location: Gdynia, Poland
Contact:

Re: Problem with long scan list...

Wed May 29, 2013 7:54 pm

http://prntscr.com/177ezn

i have 22 channels in my scan list, previously it was in one line , now it is in some kind of matrix and a cant use nothing what is below matrix.
This is normal. It is because in v6 you must use the Channels tab to define a list of channels. Then, in this window, only specify that channel list name.

thx for response , can U show me how in easiest way migrate from "old" way of defining scan list to "new" one?

also i dont see any export button for this , and it looks very complicated way... till 5.25 i just copy-paste my favorite channels....
i have to change something about 300-400 devices... please help
 
samsung172
Forum Guru
Forum Guru
Posts: 1186
Joined: Sat Apr 04, 2009 3:45 am
Location: Østfold - Norway
Contact:

Re: v6.0 released

Thu May 30, 2013 5:15 am

Make a tab in right corner, make it possible to scroll in winbox.

The change of one line per freq in scan list, make this function so much needed. From earlier, it was an issue to, but in so small grade. Now its an really big issue.

I have this scan list:

5390,5410,5430,5450,5470,5490,5510,5530,5550,5570,5590,5610,5630,5650,5670,5690,5180,5750,5770,5790,5810,5830,5850,5870,5890,5390,5410,5430,5450,5470,5490,5510,5530,5550,5570,5590,5610,5630,5650,5670,5690

Try this in 1024X768
 
User avatar
ringlet
newbie
Posts: 35
Joined: Sun Mar 07, 2010 9:24 pm
Location: Gdynia, Poland
Contact:

Re: v6.0 released

Thu May 30, 2013 9:15 am

do U think that it will be working?

/interface wireless channels add frequency=5000 width=20 band=5ghz-onlyn extension-channel=above-control list=maxnet
/interface wireless channels add frequency=5020 width=20 band=5ghz-onlyn extension-channel=above-control list=maxnet
/interface wireless channels add frequency=5040 width=20 band=5ghz-onlyn extension-channel=above-control list=maxnet
/interface wireless channels add frequency=5060 width=20 band=5ghz-onlyn extension-channel=above-control list=maxnet
/interface wireless channels add frequency=5080 width=20 band=5ghz-onlyn extension-channel=above-control list=maxnet
/interface wireless channels add frequency=5100 width=20 band=5ghz-onlyn extension-channel=above-control list=maxnet
/interface wireless channels add frequency=5120 width=20 band=5ghz-onlyn extension-channel=above-control list=maxnet
/interface wireless channels add frequency=5140 width=20 band=5ghz-onlyn extension-channel=above-control list=maxnet
/interface wireless channels add frequency=5160 width=20 band=5ghz-onlyn extension-channel=above-control list=maxnet
/interface wireless channels add frequency=5340 width=20 band=5ghz-onlyn extension-channel=above-control list=maxnet
/interface wireless channels add frequency=5360 width=20 band=5ghz-onlyn extension-channel=above-control list=maxnet
/interface wireless channels add frequency=5380 width=20 band=5ghz-onlyn extension-channel=above-control list=maxnet
/interface wireless channels add frequency=5400 width=20 band=5ghz-onlyn extension-channel=above-control list=maxnet
/interface wireless channels add frequency=5420 width=20 band=5ghz-onlyn extension-channel=above-control list=maxnet
/interface wireless channels add frequency=5440 width=20 band=5ghz-onlyn extension-channel=above-control list=maxnet
/interface wireless channels add frequency=5460 width=20 band=5ghz-onlyn extension-channel=above-control list=maxnet
/interface wireless channels add frequency=5480 width=20 band=5ghz-onlyn extension-channel=above-control list=maxnet
/interface wireless channels add frequency=5720 width=20 band=5ghz-onlyn extension-channel=above-control list=maxnet
/interface wireless channels add frequency=5740 width=20 band=5ghz-onlyn extension-channel=above-control list=maxnet
/interface wireless channels add frequency=5760 width=20 band=5ghz-onlyn extension-channel=above-control list=maxnet
/interface wireless channels add frequency=5780 width=20 band=5ghz-onlyn extension-channel=above-control list=maxnet
/interface wireless channels add frequency=5800 width=20 band=5ghz-onlyn extension-channel=above-control list=maxnet
/interface wireless set wlan1 scan-list=default,maxnet

???
 
BETEPAH
just joined
Posts: 19
Joined: Sat Apr 13, 2013 7:53 am

Re: v6.0 released

Thu May 30, 2013 11:26 am

5 days uptime, 4 millions RX drops!
Без имени-1.png
on other side interface has 0 drops
You do not have the required permissions to view the files attached to this post.
 
User avatar
kapulan
Member Candidate
Member Candidate
Posts: 110
Joined: Tue Feb 07, 2006 7:48 pm
Location: Hungary

Re: v6.0 released

Thu May 30, 2013 1:27 pm

5 days uptime, 4 millions RX drops!
Без имени-1.png
on other side interface has 0 drops
The vlan packet drops only multi cpu x86&routerboards devices. Rb1100Ah and RB800 was one cpu and not make vlan packet drops."The physical Ethernet interface do not make packet drops.

Mikrotik fix this problem.

Regards.

Krisztian
 
gjp1000
just joined
Posts: 11
Joined: Mon Nov 24, 2008 10:27 pm

Re: v6.0 released

Thu May 30, 2013 2:33 pm

The queues dissapear after a short period of time from queue list and if try to added again i take this error message "couldn't add new simple queue-already have such name"
You do not have the required permissions to view the files attached to this post.
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Thu May 30, 2013 2:34 pm

are you connecting via MAC address? Then this could happen. Use IP
No answer to your question? How to write posts
 
gjp1000
just joined
Posts: 11
Joined: Mon Nov 24, 2008 10:27 pm

Re: v6.0 released

Thu May 30, 2013 2:52 pm

I connect with ip . Ι don't know if this happens because I change my ethernet card and then i restore a backup from 5.25
 
uldis
MikroTik Support
MikroTik Support
Posts: 3427
Joined: Mon May 31, 2004 2:55 pm

Re: v6.0 released

Thu May 30, 2013 2:54 pm

ringlet, yes it will work with such channels lists.
 
BETEPAH
just joined
Posts: 19
Joined: Sat Apr 13, 2013 7:53 am

Re: v6.0 released

Thu May 30, 2013 3:46 pm

5 days uptime, 4 millions RX drops!
Без имени-1.png
on other side interface has 0 drops
The vlan packet drops only multi cpu x86&routerboards devices. Rb1100Ah and RB800 was one cpu and not make vlan packet drops."The physical Ethernet interface do not make packet drops.

Mikrotik fix this problem.

Regards.

Krisztian
Where you seeing vlans? This is physical Ethernet interface on 82598EB adapter. I have vlan's on ether2 and ether3, but not on ether1. This interface connected from 0.5 meters patchcord to other server on Centos 6.4. This server have 0 drops.
 
User avatar
Zeeester
just joined
Posts: 14
Joined: Mon Apr 24, 2006 8:28 am
Location: Osijek, Croatia

Re: v6.0 released

Thu May 30, 2013 7:55 pm

The queues dissapear after a short period of time from queue list and if try to added again i take this error message "couldn't add new simple queue-already have such name"
Same here on RB493
 
User avatar
Stillhard
Frequent Visitor
Frequent Visitor
Posts: 82
Joined: Sun Jun 10, 2012 11:18 am
Location: Banten, Indonesia
Contact:

Re: v6.0 released

Thu May 30, 2013 8:14 pm

tested 6.1rc1 (May/30/2013 09:54:26)
- NOT FIXED, error in usermanager web-ui (web-ui ignoring timezone setting)
- NOT FIXED, ip > hotspot > active - Bytes Out, Packets Out, Tx Rate, Tx Rate stays in 0 bps :lol:
 
fabiandr
just joined
Posts: 24
Joined: Tue Mar 03, 2009 10:28 pm

Re: v6.0 released

Thu May 30, 2013 8:30 pm

The queues dissapear after a short period of time from queue list and if try to added again i take this error message "couldn't add new simple queue-already have such name"
Same here on RB493
Same here on CCR1036
only appear if the server restarts
 
shrek777
Member Candidate
Member Candidate
Posts: 264
Joined: Wed Jan 21, 2009 9:44 am

Re: v6.0 released

Thu May 30, 2013 8:56 pm

its heppening with our ccrs very often, if you want to show disappeared queues again, enable it from terminal.

also i cannot add new queue without target
 
ste
Forum Guru
Forum Guru
Posts: 1816
Joined: Sun Feb 13, 2005 11:21 pm

Re: v6.0 released

Thu May 30, 2013 9:05 pm

ringlet, yes it will work with such channels lists.
Yes. But antenna-gain/country is ignored when using channels. So tx is at max.
 
scampbell
Trainer
Trainer
Posts: 458
Joined: Thu Jun 22, 2006 5:20 am
Location: Wellington, NZ
Contact:

Re: v6.0 released

Fri May 31, 2013 5:11 am

Upgraded RB450G from 5.24 to 6.0 and my meta-routers had all disappeared.

The virtual IF's were still present though but displayed unknown for meta-router.

Recreated the meta-routers with the same names and everything was then ok and all old data was present.
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Fri May 31, 2013 9:53 am

tested 6.1rc1 (May/30/2013 09:54:26)
- NOT FIXED, error in usermanager web-ui (web-ui ignoring timezone setting)
- NOT FIXED, ip > hotspot > active - Bytes Out, Packets Out, Tx Rate, Tx Rate stays in 0 bps :lol:
can you give us remote access with that Hotspot counter issue? Email support please
No answer to your question? How to write posts
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Fri May 31, 2013 9:55 am

Hi anyone using v6.1rc1 and success getting snmp? I got a problem after plug CCR with v6.1rc1 my cacti showed snmp error for those CCR Device
v6.1 may 30 build SNMP works on our CCR. Contact support with more details please. We will try to fix it.
No answer to your question? How to write posts
 
User avatar
Stillhard
Frequent Visitor
Frequent Visitor
Posts: 82
Joined: Sun Jun 10, 2012 11:18 am
Location: Banten, Indonesia
Contact:

Re: v6.0 released

Fri May 31, 2013 10:44 am

tested 6.1rc1 (May/30/2013 09:54:26)
- NOT FIXED, error in usermanager web-ui (web-ui ignoring timezone setting)
- NOT FIXED, ip > hotspot > active - Bytes Out, Packets Out, Tx Rate, Tx Rate stays in 0 bps :lol:
can you give us remote access with that Hotspot counter issue? Email support please
I'm sorry normis i can't do that for now (company's policy/weekend here)
You do not have the required permissions to view the files attached to this post.
 
djras
just joined
Posts: 11
Joined: Sat May 18, 2013 12:15 pm

Re: v6.0 released

Fri May 31, 2013 10:57 am

tested v6.1rc1
- NOT FIXED, Tools->Graphing->ResourceGraphs - CPU, HDD, Memory type = unknown
 
djras
just joined
Posts: 11
Joined: Sat May 18, 2013 12:15 pm

Re: v6.0 released

Fri May 31, 2013 11:14 am

test v6.1rc1
The section "Switch" without need now? ;)
You do not have the required permissions to view the files attached to this post.
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Fri May 31, 2013 11:15 am

test v6.1rc1
The section "Switch" without need now? ;)
I have same router and same version, yet I have the switch menu. Can you send us your supout.rif file to support@mikrotik.com? We will see why it's gone
No answer to your question? How to write posts
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Fri May 31, 2013 11:20 am

I'm sorry normis i can't do that for now (company's policy/weekend here)
In our hotspot, the counters are working. Are you sure you have traffic?
No answer to your question? How to write posts
 
User avatar
Stillhard
Frequent Visitor
Frequent Visitor
Posts: 82
Joined: Sun Jun 10, 2012 11:18 am
Location: Banten, Indonesia
Contact:

Re: v6.0 released

Fri May 31, 2013 11:30 am

I'm sorry normis i can't do that for now (company's policy/weekend here)
In our hotspot, the counters are working. Are you sure you have traffic?
Yes of course we do have traffics, fyi, it's from May/30/2013 09:54:26 release, is there a new one now? what version you're using now?
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Fri May 31, 2013 11:32 am

I'm sorry normis i can't do that for now (company's policy/weekend here)
In our hotspot, the counters are working. Are you sure you have traffic?
Yes of course we do have traffics, fyi, it's from May/30/2013 09:54:26 release, is there a new one now? what version you're using now?
Yes, it is the latest. We would need access to solve this. Anybody else have this issue?
No answer to your question? How to write posts
 
User avatar
Stillhard
Frequent Visitor
Frequent Visitor
Posts: 82
Joined: Sun Jun 10, 2012 11:18 am
Location: Banten, Indonesia
Contact:

Re: v6.0 released

Fri May 31, 2013 11:40 am

Yes, it is the latest. We would need access to solve this. Anybody else have this issue?
With May/27/2013 08:19:48 release, there was no such problem(s) (except for the usermanager's web-ui ignoring timezone setting)
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Fri May 31, 2013 11:47 am

Yes, it is the latest. We would need access to solve this. Anybody else have this issue?
With May/27/2013 08:19:48 release, there was no such problem(s) (except for the usermanager's web-ui ignoring timezone setting)
Do the bytes and packet fields show correct information? Only the TX speed is not showing?
No answer to your question? How to write posts
 
djras
just joined
Posts: 11
Joined: Sat May 18, 2013 12:15 pm

Re: v6.0 released

Fri May 31, 2013 11:52 am

test v6.1rc1
The section "Switch" without need now? ;)
I have same router and same version, yet I have the switch menu. Can you send us your supout.rif file to support@mikrotik.com? We will see why it's gone
Now I will send support.rif but how I can return back version 6.0 from 6.1rc1? Try.
(6.1rc1 ignored upgrade/downgrade packages {5.25 6.0} in Files. Only 6.1rc1 accepted.)
Last edited by djras on Fri May 31, 2013 12:07 pm, edited 1 time in total.
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Fri May 31, 2013 11:54 am

test v6.1rc1
The section "Switch" without need now? ;)
I have same router and same version, yet I have the switch menu. Can you send us your supout.rif file to support@mikrotik.com? We will see why it's gone
Now I will send support.rif but how I can return back version 6.0 from 6.1rc1? Try.
upload 6.0 package and run command "/system package downgrade"
No answer to your question? How to write posts
 
djras
just joined
Posts: 11
Joined: Sat May 18, 2013 12:15 pm

Re: v6.0 released

Fri May 31, 2013 12:14 pm

upload 6.0 package and run command "/system package downgrade"
I am afraid to do it remotely. I have not the standard MAC address settings . If updating to the prevoisely version everything leaves that a downgrade everything MAC dumps in a default settings.
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Fri May 31, 2013 12:31 pm

upload 6.0 package and run command "/system package downgrade"
I am afraid to do it remotely. I have not the standard MAC address settings . If updating to the prevoisely version everything leaves that a downgrade everything MAC dumps in a default settings.
If you have no major issues right now, I suggest to stay with v6.1
No answer to your question? How to write posts
 
User avatar
Stillhard
Frequent Visitor
Frequent Visitor
Posts: 82
Joined: Sun Jun 10, 2012 11:18 am
Location: Banten, Indonesia
Contact:

Re: v6.0 released

Fri May 31, 2013 12:47 pm

Yes, it is the latest. We would need access to solve this. Anybody else have this issue?
With May/27/2013 08:19:48 release, there was no such problem(s) (except for the usermanager's web-ui ignoring timezone setting)
Do the bytes and packet fields show correct information? Only the TX speed is not showing?
Well, i can't show you the pic right now, but yes, it's show the correct informations
 
mark
just joined
Posts: 16
Joined: Thu May 09, 2013 6:09 pm
Location: EU, Germany

Re: v6.0 released

Fri May 31, 2013 2:15 pm

The queues dissapear after a short period of time from queue list and if try to added again i take this error message "couldn't add new simple queue-already have such name"
This happens on all my RB951 and SXT devices, too. They're accessible through the command shell, though.

I really hope that it is related to bridges disappearing and/or (independently) losing their IPv6 link-local addresses, and that all this can be fixed very soon.
In our [item X; Mark], the [Y; Mark] are working. […]
Normis, I don't meant to offend. Please accept this as my sincere advice, from one engineer to the other: The »it works for us« (»… and so should for you«) communicates on more than one level negatively. — It suggests that the customer is wrong. Even if this is the case, he is to be taken seriously and an (not *the*) error has a cause still to be found.
Furthermore it is anecdotal, unless you really had a test-case of 1'000 devices meant for QA in mind.
Finally the phrase is perceived in such a way that the issue won't be fixed or with low(est) priority.

There is something wrong and by communicating it we signal that we want to help you find the cause and help us fix a bug. You're, as Mikrotik or on behalf of, sometimes accepting that help, that's true, though, and held in high regard.
If you like what I've posted and want to see more of that, then please say thank you by giving me karma.

Please do not contact me by PM or email.
 
midnightman
Frequent Visitor
Frequent Visitor
Posts: 97
Joined: Sun Sep 19, 2010 5:22 pm

Re: v6.0 released

Fri May 31, 2013 3:55 pm

V6 simple queues still Day/night not working.

If I set for day parent queue time: 06:00:00 - 1d 00:00:00
and for night parent queue time: 00:00:00 - 06:00:00

queue is shown "red" and not working... (ROS v.3, v.4, v.5 are OK) Where is the problem? Thanks!
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Fri May 31, 2013 3:56 pm

V6 simple queues still Day/night not working.

If I set for day parent queue time: 06:00:00 - 1d 00:00:00
and for night parent queue time: 00:00:00 - 06:00:00

queue is shown "red" and not working... (ROS v.3, v.4, v.5 are OK) Where is the problem? Thanks!
It will be shown in RED when it's not the set time. When that time comes, it will turn active. Did you try using 23:59:59 instead of 0;0;0?
No answer to your question? How to write posts
 
midnightman
Frequent Visitor
Frequent Visitor
Posts: 97
Joined: Sun Sep 19, 2010 5:22 pm

Re: v6.0 released

Fri May 31, 2013 5:06 pm

in ROS 5.XX queues were still normal (not red)...I will try 23:59:59 thanks.

///Thanks Normis :) Queues are working....really if queues are inactive they are "red"....
 
lukoramu
just joined
Posts: 18
Joined: Mon Jan 07, 2013 11:11 am

Re: v6.0 released

Sat Jun 01, 2013 9:39 am

The queues dissapear after a short period of time from queue list and if try to added again i take this error message "couldn't add new simple queue-already have such name"
Same here on RB493
Same here on CCR1036
only appear if the server restarts
It's happening on my CCR1036 too. I know queues are working - I see it from the interface statistics, but all counters in the Queue Tree (when queues are showing, of course) are stuck. "/queue tree print rate" doesn't work either.

P.S. I wouldn't say they dissapear after some period of time - for me, it's when I re-login.
 
djras
just joined
Posts: 11
Joined: Sat May 18, 2013 12:15 pm

Re: v6.0 released

Sat Jun 01, 2013 11:52 am

tested ros v6.0 CCR1036-12G-4S (tile)

I have a problem with Parrent in Queue. If I create the general record for "Parent" I can't set some IP addresses. Records are created, but after use of parameters all queue counters stoped. if I put 1 ip the address that other counters work and all counters for Parent are stopped.
You do not have the required permissions to view the files attached to this post.
 
djras
just joined
Posts: 11
Joined: Sat May 18, 2013 12:15 pm

Re: v6.0 released

Sat Jun 01, 2013 12:29 pm

The queues dissapear after a short period of time from queue list and if try to added again i take this error message "couldn't add new simple queue-already have such name"
.....
It's happening on my CCR1036 too. I know queues are working - I see it from the interface statistics, but all counters in the Queue Tree (when queues are showing, of course) are stuck. "/queue tree print rate" doesn't work either.

P.S. I wouldn't say they dissapear after some period of time - for me, it's when I re-login.
I think it other situation. I suggest that Queue service began to work another way. Instead of ignoring of lines with not right syntax he tries to execute interpretation them. These are only my guesses. ;)
It is like the start of Unix Services. The firstly - a config rereading. The second - commands of service.
Where exactly there is a problem - a question to support.
 
gjp1000
just joined
Posts: 11
Joined: Mon Nov 24, 2008 10:27 pm

Re: v6.0 released

Sat Jun 01, 2013 12:48 pm

djras the ros 6 has several bugs with different things such as queues, lan drivers on x86 platform, etc, as you can read in this forum.
Im sure that Mikrotik team finally solve all these problems as usually
 
wwooley
just joined
Posts: 4
Joined: Fri Apr 06, 2012 6:59 pm

Re: v6.0 released - HOTSPOT Issues/Feedback

Sat Jun 01, 2013 4:52 pm

Hotspot Issue:

RB450G > v6.0 > Hotspot
Problems:
login.html doesn't always load.
Once login attempted, no redirection or any website load.
Shows user session in Hosts/Users
Hotspot Files not complete - no login.html, alogin.html, etc

Installed v6.1rc1:
login.html loads quickly
redirects and web-browsing OK, except:
some websites will not load (aol.com, gmail, pogo.com, etc)

Downgraded to v5.24:
Running smoothly at this time.

NOTE: have left v6.1rc1 on remainder of eqpt in network.

On a POSITIVE Note:
As soon as we upgraded all of our eqpt to v6.0 (8 AP w/5.8 Backhauls), there was a NOTICEABLE IMPROVEMENT in network performance. improved WDS link CCQ, reduced latency, consistent client connections.


Thanks,
wwooley
 
chemil
just joined
Posts: 17
Joined: Thu Jun 23, 2011 10:33 am

Re: v6.0 released

Sat Jun 01, 2013 8:48 pm

Hi, I have a problem with the stability of IPSec LAN-to-LAN tunnel on the CCR1036
6.14rc - it seems that have this problem
6.0 - same as 6.14rc
6.1rc - doesn't even make a connection

My case fits best to http://forum.mikrotik.com/viewtopic.php?f=2&t=56944

I can provide access to my router if someone from support can help me.
 
juantete
just joined
Posts: 9
Joined: Wed Sep 10, 2008 4:07 am
Location: Colombia
Contact:

Re: v6.0 released

Sun Jun 02, 2013 3:02 am

Hi, I have a X86 Installed with 3 ethernet interfaces, the update to version 6.0, the PCI Express interface ethernet 1, RTL8101E/RTL8102E Fast Ethernet controller (rev: 1) stopped working, I check in resources and PCI tab appears but no data traffic.

Can help with this.

Thanks.
 
FMouse
just joined
Posts: 2
Joined: Fri May 31, 2013 10:15 pm

Re: v6.0 released

Sun Jun 02, 2013 5:05 am

x86

6.0 - dhcp client continued searching even after reboot release etc.
downgrade to 5.25
no problem
 
ariko
just joined
Posts: 6
Joined: Wed Sep 26, 2012 11:26 pm

Re: v6.0 released

Sun Jun 02, 2013 8:12 am

Hello MikroTik,
Is VLAN working on 6.0 when enabled on x86 Intel PCI-X interface?
It's not working since first 6.x betas were released.
I've tested and VLANs do not appear to work in 6.0 on x86.
promind and timoid,
Could you please send supout.rif files to support@mikrotik.com for research?
Same to me. After upgrade to 6.0 for x86 all vlans stopped working. Reset config and doing it again also does not help.
Downgrade to 5.25 solved the issue.
Seems like 6.0 release for x86 has major issue with VLANs.
I wrote to support@mikrotik.com couple of days ago, but no answer ..... yet.
 
morf
Member Candidate
Member Candidate
Posts: 159
Joined: Tue Jun 21, 2011 5:31 pm
Location: Saint-Petersburg

Re: v6.0 released

Sun Jun 02, 2013 11:15 am

Same to me. After upgrade to 6.0 for x86 all vlans stopped working. Reset config and doing it again also does not help.
Downgrade to 5.25 solved the issue.
Seems like 6.0 release for x86 has major issue with VLANs.
I wrote to support@mikrotik.com couple of days ago, but no answer ..... yet.
I have the same. After upgrading from 5.18 to 6.0 stopped working Vlan.
 
mars
Member Candidate
Member Candidate
Posts: 228
Joined: Sun Mar 14, 2010 1:43 pm

Re: v6.0 released

Sun Jun 02, 2013 11:18 am

hi
anybody else having the problem that ros 6.0 is showing higher voltages on the rbs
 
Lakis
Forum Veteran
Forum Veteran
Posts: 701
Joined: Wed Sep 23, 2009 7:52 pm

Re: v6.0 released

Sun Jun 02, 2013 2:46 pm

hi
anybody else having the problem that ros 6.0 is showing higher voltages on the rbs
most of MT senors are not correct - they should let us to recalibrate them
 
HaPe
Member Candidate
Member Candidate
Posts: 232
Joined: Fri Feb 10, 2012 10:24 pm
Location: Poland

Re: v6.0 released

Sun Jun 02, 2013 3:18 pm

hi
anybody else having the problem that ros 6.0 is showing higher voltages on the rbs
most of MT senors are not correct - they should let us to recalibrate them
+1
Each of us has got voltometer.
In anticipation on new The Dude release.
 
elmer
newbie
Posts: 40
Joined: Mon Jun 18, 2012 4:02 pm

Re: v6.0 released

Sun Jun 02, 2013 7:27 pm

After the installing my RB is rebooting everytime. He never came up.
with hard reset it doesnt work.. every time a reboot in 60seconds..
help me!
Watchdog? ;)
 
elmer
newbie
Posts: 40
Joined: Mon Jun 18, 2012 4:02 pm

Re: v6.0 released

Sun Jun 02, 2013 7:39 pm

Same here on CCR1036
only appear if the server restarts
It's happening on my CCR1036 too. I know queues are working - I see it from the interface statistics, but all counters in the Queue Tree (when queues are showing, of course) are stuck. "/queue tree print rate" doesn't work either.
P.S. I wouldn't say they dissapear after some period of time - for me, it's when I re-login.
After reboot change something in queues (name or something) then after click on all queues reboot.
Problem gone 4 me on RB435G and 2011LS :)
 
gjp1000
just joined
Posts: 11
Joined: Mon Nov 24, 2008 10:27 pm

Re: v6.0 released

Sun Jun 02, 2013 9:40 pm

Hi, I have a X86 Installed with 3 ethernet interfaces, the update to version 6.0, the PCI Express interface ethernet 1, RTL8101E/RTL8102E Fast Ethernet controller (rev: 1) stopped working, I check in resources and PCI tab appears but no data traffic.

Can help with this.

Thanks.
try a pci express with intel chipset ,i have an issue with realtek chip in ros 6
 
cinatus
just joined
Posts: 15
Joined: Fri Nov 18, 2005 4:50 am

Re: v6.0 released

Sun Jun 02, 2013 10:46 pm

hi
anybody else having the problem that ros 6.0 is showing higher voltages on the rbs
I am having the same issue. 5.25 vlans work fine. 6.0 vlans stop working. I run a packet capture and arp "who-has" packets come in tagged and arp "has" packets go out untagged.
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8321
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: v6.0 released

Sun Jun 02, 2013 10:52 pm

also i cannot add new queue without target
it's as it should be: if target is unknown, it's impossible to distinguish between upload and download; so 'tagret' is mandatory
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
markmcn
Frequent Visitor
Frequent Visitor
Posts: 78
Joined: Wed Mar 03, 2010 2:15 am

Re: v6.0 released

Mon Jun 03, 2013 12:58 am

Noticed the ping check on static routes didn't detect with the gateway went away I've sent this into support with the needed files anyone else seen this?
I had a /30 on a point to point over a Cat5 and a static route pointing to the ip on the far end with ping set as the gateway check, However even when I disconnected the cable the route was listed as reachable!!
Let me update this by saying I can't recreate it following a reboot so I don't know maybe something was stuck however this might be worth watching support have said they can't recreate the issue and I hope it was a one off as I don't want to have to downgrade
 
kapnos
newbie
Posts: 30
Joined: Thu Dec 13, 2012 1:51 am

Re: v6.0 released

Mon Jun 03, 2013 12:38 pm

Hi, I have the following problems after upgrading from 5.25 to 6.0:
1. Graphs for Memory and Disk Usage don't work, when I click on them I get this error: ERROR: NO ACCESS!
2. Memory usage is very high, I get only about 20MB free on 6.0, while using 5.25 I had about 100MB free.
3. I see that 3 metarouters are installed by default, I haven't added them.
 
User avatar
netzwerghh
just joined
Posts: 11
Joined: Sun Aug 07, 2011 4:23 pm
Location: Hamburg, DE
Contact:

Re: v6.0 released

Mon Jun 03, 2013 2:33 pm

Same to me. After upgrade to 6.0 for x86 all vlans stopped working. Reset config and doing it again also does not help.
Downgrade to 5.25 solved the issue.
Seems like 6.0 release for x86 has major issue with VLANs.
I wrote to support@mikrotik.com couple of days ago, but no answer ..... yet.
I have the same. After upgrading from 5.18 to 6.0 stopped working Vlan.
No VLANs either on v6 x86 on VMware ESXi 5.1 with E1000. Traffic without VLANs ist working normal. I can see Packets being send and received on the VLAN-Interface when doing nothing but ping to the IP of the VLAN-Interface. But I do not get an answer. Maybe the VLAN-RX is missimplemented so the switch drops the frames.
After downgrade to 5.25 everything works as expected. So no configuration issue.
Also VLANs on RB2011UAS (mipsbe) are working as expected under v6.

I will send a support.rif in a few minutes.
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6618
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: v6.0 released

Mon Jun 03, 2013 4:16 pm

wwooley
some websites will not load (aol.com, gmail, pogo.com, etc)
Please make sure your router is not connected to place, that has problems with broken MTU.
Do you have the same problem with those pages, when HotSpot server is disabled?
 
ricky011
newbie
Posts: 35
Joined: Tue Jul 15, 2008 1:33 pm
Location: Serbia

Re: v6.0 released

Mon Jun 03, 2013 6:52 pm

I've been using Mikrotik ROS and RB's for more then a decade now... But, never have I had this much issues... never... This is starting to be ridiculous...

Among other issues, after upgrade to final v6, my rb711 started rebooting by watchdog every time its CPU goes over 70-80%... I have this device working for 3 years, with uptime of more then a year... downgrade to 5.23 and no problem....


this is not good... please FIX FAST!
 
cursemipn
just joined
Posts: 13
Joined: Mon Jan 28, 2013 7:59 am
Location: Russia, Nizhnevartovsk

Re: v6.0 released

Tue Jun 04, 2013 7:24 am

Same to me. After upgrade to 6.0 for x86 all vlans stopped working. Reset config and doing it again also does not help.
Downgrade to 5.25 solved the issue.
Seems like 6.0 release for x86 has major issue with VLANs.
I wrote to support@mikrotik.com couple of days ago, but no answer ..... yet.
I have the same. After upgrading from 5.18 to 6.0 stopped working Vlan.
No VLANs either on v6 x86 on VMware ESXi 5.1 with E1000. Traffic without VLANs ist working normal. I can see Packets being send and received on the VLAN-Interface when doing nothing but ping to the IP of the VLAN-Interface. But I do not get an answer. Maybe the VLAN-RX is missimplemented so the switch drops the frames.
After downgrade to 5.25 everything works as expected. So no configuration issue.
Also VLANs on RB2011UAS (mipsbe) are working as expected under v6.

I will send a support.rif in a few minutes.
I asked about this issue 5 months ago in this topic http://forum.mikrotik.com/viewtopic.php?f=1&t=69369.
 
User avatar
paka
Frequent Visitor
Frequent Visitor
Posts: 81
Joined: Thu Jan 08, 2009 4:25 pm
Location: Bonn, Germany
Contact:

Re: v6.0 released

Tue Jun 04, 2013 7:41 pm

Hi,

by UM v.6.0 after signup the user is not activated. The status in the payment-table is "waiting".
i have tested many times, the result is the same.

besides UM has not updated the user information by changing. GUI shows sometimes wrong informations or nothing.
i have reported this problem a long time, but nobody wants to fix this. We need stable version of UM.
Please do it, Thanks
us-error_20130604.JPG
You do not have the required permissions to view the files attached to this post.
Last edited by paka on Wed Jun 05, 2013 11:41 pm, edited 1 time in total.
 
wwooley
just joined
Posts: 4
Joined: Fri Apr 06, 2012 6:59 pm

Re: v6.0 released

Wed Jun 05, 2013 7:18 am

wwooley
some websites will not load (aol.com, gmail, pogo.com, etc)
Please make sure your router is not connected to place, that has problems with broken MTU.
Do you have the same problem with those pages, when HotSpot server is disabled?
No problem when hotspot disabled/bypassed. (Tested this using 3 different methods.) Downgraded to 5.24 with no other configuration changes -- web access issues resolved after downgrade.
NOTE: Router hosts the Hotspot - verified that multiple clients were experiencing the same issue while connected via different AP's throughout the network. All client issues verified resolved after downgrade.

Today have verified network still OK regarding expected web site access.

Thanks...
 
ariko
just joined
Posts: 6
Joined: Wed Sep 26, 2012 11:26 pm

Re: v6.0 released

Wed Jun 05, 2013 6:11 pm

Same to me. After upgrade to 6.0 for x86 all vlans stopped working. Reset config and doing it again also does not help.
Downgrade to 5.25 solved the issue.
Seems like 6.0 release for x86 has major issue with VLANs.
I wrote to support@mikrotik.com couple of days ago, but no answer ..... yet.
I have the same. After upgrading from 5.18 to 6.0 stopped working Vlan.
No VLANs either on v6 x86 on VMware ESXi 5.1 with E1000. Traffic without VLANs ist working normal. I can see Packets being send and received on the VLAN-Interface when doing nothing but ping to the IP of the VLAN-Interface. But I do not get an answer. Maybe the VLAN-RX is missimplemented so the switch drops the frames.
After downgrade to 5.25 everything works as expected. So no configuration issue.
Also VLANs on RB2011UAS (mipsbe) are working as expected under v6.

I will send a support.rif in a few minutes.
Hi,
VLAN issue for x86 fixed in 6.1 rc1
http://www.mikrotik.com/download/share/ ... 6.1rc1.npk

but I'm not sure I wanna test it again ...
 
adtyne
just joined
Posts: 1
Joined: Wed Jun 05, 2013 6:04 pm

Re: v6.0 released

Wed Jun 05, 2013 6:11 pm

In the last 2 weeks we've had 2 SXT HPnD's fail following the installation of RouterOS 6.0

Both are completely dead, no link light on the ethernet port, only the power LED on the unit it's self. Trying to use the button to do a netinstall doesnt work, as the user LED never flashes.

Dont know if it's coincidence, or that the SXT doesnt like 6.0
 
User avatar
THG
Member
Member
Posts: 472
Joined: Thu Oct 15, 2009 1:05 am

Re: v6.0 released

Wed Jun 05, 2013 9:33 pm

Hi,
VLAN issue for x86 fixed in 6.1 rc1
http://www.mikrotik.com/download/share/ ... 6.1rc1.npk

but I'm not sure I wanna test it again ...
I upgraded and the issue with VLAN has been resolved.
 
tiggda
newbie
Posts: 29
Joined: Fri Mar 04, 2011 11:07 am

Re: v6.0 released

Wed Jun 05, 2013 11:04 pm

Hi, I have the following problems after upgrading from 5.25 to 6.0:
1. Graphs for Memory and Disk Usage don't work, when I click on them I get this error: ERROR: NO ACCESS!
This one is also true for me, no resource graphs available for viewing.

--
tig
 
User avatar
paka
Frequent Visitor
Frequent Visitor
Posts: 81
Joined: Thu Jan 08, 2009 4:25 pm
Location: Bonn, Germany
Contact:

Re: v6.0 released

Wed Jun 05, 2013 11:45 pm

Hi Normis,

UM v6.0 has a bug. The status of payment is "waiting". See my previous message.
(tested by RB 433AH)
Please help us. Thanks

regards
 
jcem
Member Candidate
Member Candidate
Posts: 137
Joined: Sun May 24, 2009 4:41 pm
Location: Grebbestad, Sweden

Re: v6.0 released

Thu Jun 06, 2013 1:02 am

Hi paka!

I had some problems too. Check active certificate under ip/services so that the correct certificate
is choosen.

Also check if you can rebuild the database in winbox/terminal - tool user database rebuild without errors

I had one database getting corrupted when upgradeing to ROS6 and the certificate also change on one hotspot

RGDS
 
cursemipn
just joined
Posts: 13
Joined: Mon Jan 28, 2013 7:59 am
Location: Russia, Nizhnevartovsk

Re: v6.0 released

Thu Jun 06, 2013 9:36 am

Hi,
VLAN issue for x86 fixed in 6.1 rc1
http://www.mikrotik.com/download/share/ ... 6.1rc1.npk

but I'm not sure I wanna test it again ...
I upgraded and the issue with VLAN has been resolved.
Finally mikrotik fixed this problem. Thanks a lot. I'm going to test.
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Thu Jun 06, 2013 11:04 am

People with queues going missing in Winbox, please try this new build, where this isssue should be fixed:
CCR: http://www.mikrotik.com/download/share/ ... le-6.1.npk
PPC: http://www.mikrotik.com/download/share/ ... pc-6.1.npk
MBE: http://www.mikrotik.com/download/share/ ... be-6.1.npk
MLE: http://www.mikrotik.com/download/share/ ... le-6.1.npk
X86: http://www.mikrotik.com/download/share/ ... 86-6.1.npk

P.S.: as usual, pre-release builds should be treated with caution
No answer to your question? How to write posts
 
lobito
just joined
Posts: 2
Joined: Mon Jul 23, 2012 1:01 pm

Re: v6.0 released

Thu Jun 06, 2013 11:36 am

wwooley
some websites will not load (aol.com, gmail, pogo.com, etc)
Please make sure your router is not connected to place, that has problems with broken MTU.
Do you have the same problem with those pages, when HotSpot server is disabled?
No problem when hotspot disabled/bypassed. (Tested this using 3 different methods.) Downgraded to 5.24 with no other configuration changes -- web access issues resolved after downgrade.
NOTE: Router hosts the Hotspot - verified that multiple clients were experiencing the same issue while connected via different AP's throughout the network. All client issues verified resolved after downgrade.

Today have verified network still OK regarding expected web site access.

Thanks...
I have the same issue. Skype, ping, icmp, sip all that works fine, except webaccess. Clients say "still waiting for DNS" but nslookup works fine and DNS Servers are the Google DNS.
 
User avatar
paka
Frequent Visitor
Frequent Visitor
Posts: 81
Joined: Thu Jan 08, 2009 4:25 pm
Location: Bonn, Germany
Contact:

Re: v6.0 released

Thu Jun 06, 2013 12:04 pm

Hi paka!

I had some problems too. Check active certificate under ip/services so that the correct certificate
is choosen.

Also check if you can rebuild the database in winbox/terminal - tool user database rebuild without errors

I had one database getting corrupted when upgradeing to ROS6 and the certificate also change on one hotspot

RGDS
Hi jcem,

thank you very much for answer and counsel.
I check always certificate and look under ip/services by testing
Before to upgrade our database, at first i have tested v6.0 with blank database.(tested the database from v6.0)
So it is not working with v6.0, but by v5.24 and v5.25 it is working. Tested UM with paypal payment.
I have not tested to rebuild the database, but i'll do it and report about my result.

Regards,
paka
 
User avatar
paka
Frequent Visitor
Frequent Visitor
Posts: 81
Joined: Thu Jan 08, 2009 4:25 pm
Location: Bonn, Germany
Contact:

Re: v6.0 released

Thu Jun 06, 2013 12:14 pm

Hi Normis,

do you test the basic functions of UM before ROS is released?
 
User avatar
Stillhard
Frequent Visitor
Frequent Visitor
Posts: 82
Joined: Sun Jun 10, 2012 11:18 am
Location: Banten, Indonesia
Contact:

Re: v6.0 released

Thu Jun 06, 2013 1:58 pm

People with queues going missing in Winbox, please try this new build, where this isssue should be fixed:
CCR: http://www.mikrotik.com/download/share/ ... 6.1rc1.npk
PPC: http://www.mikrotik.com/download/share/ ... 6.1rc1.npk
MBE: http://www.mikrotik.com/download/share/ ... 6.1rc1.npk
MLE: http://www.mikrotik.com/download/share/ ... 6.1rc1.npk
X86: http://www.mikrotik.com/download/share/ ... 6.1rc1.npk

P.S.: as usual, pre-release builds should be treated with caution
normis, can you tell me if the tx rate and usermanager's web-ui timezone error has been fixed in this release?
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Thu Jun 06, 2013 2:17 pm

normis, can you tell me if the tx rate and usermanager's web-ui timezone error has been fixed in this release?
Please contact support with screenshot images of the problem.
No answer to your question? How to write posts
 
guysucu
just joined
Posts: 2
Joined: Thu Jun 06, 2013 5:55 pm

Re: v6.0 released

Thu Jun 06, 2013 5:59 pm

The torch appears to have some problem. Wehn you are in Queue and choose torch it coms with an IP totaly crazy. You have to delete and put manualy the IP you want to torch.
 
guysucu
just joined
Posts: 2
Joined: Thu Jun 06, 2013 5:55 pm

Re: v6.0 released

Thu Jun 06, 2013 6:27 pm

There is something wrong with TORCH. If you´re in Simple Queue, and choose TORCH it gets an src-address IP address totaly crazy. Like, my network is 192.168.1.0/24. WHen I TORCH from Simple Queue it show me a Src. Address 86.0.0.0/0 and the error message: Could´nt start - bad src-address. No way to torch from Simple Queue.
 
ghi000
newbie
Posts: 30
Joined: Thu Jun 06, 2013 6:05 pm
Location: București, România
Contact:

Re: v6.0 released

Thu Jun 06, 2013 6:57 pm

Thanks MikroTik for wonderful hardware and software! And congratulations with release! :)

I want to report a bug with IPSec.
After upgrading from 5.25 to 6.0 IPSec VPN (IP over IP tunnel via IPSec in transport mode) stopped to work.
A lot was logged (when enabled ipsec logging), incloding the following:
14:36:40 ipsec,debug fatal INVALID-PAYLOAD-TYPE notify messsage, phase1 should be deleted. 
Solution was to enable default IPSec proposal (which isn't used and was disabled).

In my configuration, with RouterOS v6 ipsec will not work if the first request will be made from RB1100AHx2 to any Mips router with v6, also it will not work from RB1000 to RB1100AHx2. But if the request is coming from a mips device, the RB1100AHx2 will accept it and IPSec will work. The upgrade files used for both mips and ppc devices were taken from the all_packages-ppc-6.0 and all_packages-mipsbe-6.0 zip files. I tried to solve with support guys, but they were asking for supout, and i can't put the network offline, again. It's a prod environment. The only solution was to go back to RouterOS v5.25 on the RB1100AHx2, as well as on RB1000. The mips devices, rb2011, rb750, etc. can work with v6.
Re-registered after i was banned, maybe this info will help someone :)))))
 
pvidal
newbie
Posts: 28
Joined: Fri May 11, 2012 6:18 pm
Location: Buenos Aires, Argentina
Contact:

Re: v6.0 released

Thu Jun 06, 2013 10:05 pm

I have recently upgraded an RB750GL from rOS 5.25 to 6.0 and the simple queues stop working.
Each queue have been working perfectly fine on 5.25 but on 6.0 (with firmware upgraded also) stop processing traffic. The queues only have the client IP address (for ex: 10.1.191.10) in "Target" and "Download" and "Upload" limit.
I tried erasing every queue and regenerating but stays the same.

Anyone have this kind of problem or know how to solve it?

Thanks in advance! :?
Pablo J. Vidal
Certified MikroTik Consultant
http://www.snwifi.com.ar
Image
 
aldoir
newbie
Posts: 27
Joined: Fri Aug 24, 2012 4:19 am

Re: v6.0 released

Fri Jun 07, 2013 2:07 am

In my configuration, with RouterOS v6 ipsec will not work if the first request will be made from RB1100AHx2 to any Mips router with v6, also it will not work from RB1000 to RB1100AHx2. But if the request is coming from a mips device, the RB1100AHx2 will accept it and IPSec will work. The upgrade files used for both mips and ppc devices were taken from the all_packages-ppc-6.0 and all_packages-mipsbe-6.0 zip files. I tried to solve with support guys, but they were asking for supout, and i can't put the network offline, again. It's a prod environment. The only solution was to go back to RouterOS v5.25 on the RB1100AHx2, as well as on RB1000. The mips devices, rb2011, rb750, etc. can work with v6.
Re-registered after i was banned, maybe this info will help someone :)))))
I can confirm this bug as well
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Fri Jun 07, 2013 12:44 pm

I have recently upgraded an RB750GL from rOS 5.25 to 6.0 and the simple queues stop working.
Each queue have been working perfectly fine on 5.25 but on 6.0 (with firmware upgraded also) stop processing traffic. The queues only have the client IP address (for ex: 10.1.191.10) in "Target" and "Download" and "Upload" limit.
I tried erasing every queue and regenerating but stays the same.

Anyone have this kind of problem or know how to solve it?

Thanks in advance! :?
Try 6.1 from the above links.

Anybody with v6.1, could you confirm that disappearing queues are fixed now?
No answer to your question? How to write posts
 
ghi000
newbie
Posts: 30
Joined: Thu Jun 06, 2013 6:05 pm
Location: București, România
Contact:

Re: v6.0 released

Fri Jun 07, 2013 1:46 pm

In my configuration, with RouterOS v6 ipsec will not work if the first request will be made from RB1100AHx2 to any Mips router with v6, also it will not work from RB1000 to RB1100AHx2. But if the request is coming from a mips device, the RB1100AHx2 will accept it and IPSec will work. The upgrade files used for both mips and ppc devices were taken from the all_packages-ppc-6.0 and all_packages-mipsbe-6.0 zip files. I tried to solve with support guys, but they were asking for supout, and i can't put the network offline, again. It's a prod environment. The only solution was to go back to RouterOS v5.25 on the RB1100AHx2, as well as on RB1000. The mips devices, rb2011, rb750, etc. can work with v6.
Re-registered after i was banned, maybe this info will help someone :)))))
I can confirm this bug as well
Thanks! I forgot to mention that i exported the ipsec and firewall settings,sent them to the support guys, but they said there is no problem :) but it is just like i wrote above.
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Fri Jun 07, 2013 3:10 pm

Latest build is here. Please test for Queue disappearance. It should be fixed.

Warning, pre-release!
CCR: http://www.mikrotik.com/download/share/routeros-tile-6.1.npk
PPC: http://www.mikrotik.com/download/share/routeros-powerpc-6.1.npk
MBE: http://www.mikrotik.com/download/share/routeros-mipsbe-6.1.npk
MLE: http://www.mikrotik.com/download/share/routeros-mipsle-6.1.npk
X86: http://www.mikrotik.com/download/share/routeros-x86-6.1.npk
No answer to your question? How to write posts
 
User avatar
Stillhard
Frequent Visitor
Frequent Visitor
Posts: 82
Joined: Sun Jun 10, 2012 11:18 am
Location: Banten, Indonesia
Contact:

Re: v6.0 released

Fri Jun 07, 2013 3:11 pm

normis, can you tell me if the tx rate and usermanager's web-ui timezone error has been fixed in this release?
Please contact support with screenshot images of the problem.
I already did: http://forum.mikrotik.com/viewtopic.php ... 50#p371200
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Fri Jun 07, 2013 3:13 pm

normis, can you tell me if the tx rate and usermanager's web-ui timezone error has been fixed in this release?
Please contact support with screenshot images of the problem.
I already did: http://forum.mikrotik.com/viewtopic.php ... 50#p371200
This is not the same problem! I was talking about the user manager timezone issue in Web UI
No answer to your question? How to write posts
 
User avatar
Stillhard
Frequent Visitor
Frequent Visitor
Posts: 82
Joined: Sun Jun 10, 2012 11:18 am
Location: Banten, Indonesia
Contact:

Re: v6.0 released

Fri Jun 07, 2013 3:20 pm

This is not the same problem! I was talking about the user manager timezone issue in Web UI
Using May/14/2013 15:06:04 release - NO TX RATE problem in this version
You do not have the required permissions to view the files attached to this post.
 
User avatar
Stillhard
Frequent Visitor
Frequent Visitor
Posts: 82
Joined: Sun Jun 10, 2012 11:18 am
Location: Banten, Indonesia
Contact:

Re: v6.0 released

Fri Jun 07, 2013 3:44 pm

Above post updated :D
 
drusha
just joined
Posts: 14
Joined: Sun Mar 14, 2010 3:13 am

Re: v6.0 released

Fri Jun 07, 2013 3:47 pm

First of all, I wish to thank the Mikrotik team for their good work. You guys are awesome!

I have a question regarding this release. I've upgraded few days ago and now my router experiences a new memory consumption phenomenon (see the attachment). I would consider it as a memory leak bug, but since it is a major version upgrade prior reporting I'm just wondering are there any new caching services enabled in this particular release? If so, then I would like to know what exactly are those in order to disable them.

My configuration is:
x86 Router OS on a multicore CPU
two virtual machines on KVM (their normal memory consumption is visible on the left of the pic)
Web Proxy was always disabled and I also checked it first, when I saw the memory graphic.
Hotspot normally for 60-90 clients

The only thing I've changed in my config right after upgrade was enabling the mac-cookie option (which was my reason for upgrading, otherwise I never upgrade if everything is stable). Normis, if you will consider this issue as a bug, then I will send the supout.
You do not have the required permissions to view the files attached to this post.
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Fri Jun 07, 2013 3:50 pm

First of all, if possible, try the above v6.1 version.

If problem persists - Make two files, right after you reboot, and then after a while when the memory is eaten up. Send both files to support.
No answer to your question? How to write posts
 
pvidal
newbie
Posts: 28
Joined: Fri May 11, 2012 6:18 pm
Location: Buenos Aires, Argentina
Contact:

Re: v6.0 released

Sat Jun 08, 2013 12:02 am

I have recently upgraded an RB750GL from rOS 5.25 to 6.0 and the simple queues stop working.
Each queue have been working perfectly fine on 5.25 but on 6.0 (with firmware upgraded also) stop processing traffic. The queues only have the client IP address (for ex: 10.1.191.10) in "Target" and "Download" and "Upload" limit.
I tried erasing every queue and regenerating but stays the same.

Anyone have this kind of problem or know how to solve it?

Thanks in advance! :?
Try 6.1 from the above links.

Anybody with v6.1, could you confirm that disappearing queues are fixed now?
Thanx, Normis!
Pablo J. Vidal
Certified MikroTik Consultant
http://www.snwifi.com.ar
Image
 
coffeecoco
Member Candidate
Member Candidate
Posts: 175
Joined: Wed Oct 12, 2005 1:17 pm

Re: v6.0 released

Sat Jun 08, 2013 12:46 am

the problem with disapearing bridge interfaces and randomly dissapearing WLAN interfaces is still there

FYI this has been happening since day 1 of the rc6.0 beta, i reported it many times but no one gave a crap......

6.1 did not resolve the issue.!
 
User avatar
Stillhard
Frequent Visitor
Frequent Visitor
Posts: 82
Joined: Sun Jun 10, 2012 11:18 am
Location: Banten, Indonesia
Contact:

Re: v6.0 released

Sat Jun 08, 2013 5:49 am

the problem with disapearing bridge interfaces and randomly dissapearing WLAN interfaces is still there

FYI this has been happening since day 1 of the rc6.0 beta, i reported it many times but no one gave a crap......

6.1 did not resolve the issue.!
Just be patient, we'll get a reward someday as a reporter :)
 
User avatar
Stillhard
Frequent Visitor
Frequent Visitor
Posts: 82
Joined: Sun Jun 10, 2012 11:18 am
Location: Banten, Indonesia
Contact:

Re: v6.0 released

Sat Jun 08, 2013 10:18 am

:shock: i'm gonna try this new v6.1 released

Edit:
tested 6.1 released (Jun/06/2013 16:11:56)
- NOT FIXED, error in usermanager web-ui (web-ui ignoring timezone setting)
- FIXED, ip > hotspot > active - Bytes Out, Packets Out, Tx Rate, Tx Rate stays in 0 bps :)
- NEW ERROR, on boot, there's an error about xxx...fastpath.ko not loading or something (can't afford to test that version again to see the msg again since alot of ppls will angry at me)

Back to 6.0rc14 again now (with error in usermanager web-ui (web-ui ignoring timezone setting) only)
 
coffeecoco
Member Candidate
Member Candidate
Posts: 175
Joined: Wed Oct 12, 2005 1:17 pm

Re: v6.0 released

Sat Jun 08, 2013 2:28 pm

the problem with disapearing bridge interfaces and randomly dissapearing WLAN interfaces is still there

FYI this has been happening since day 1 of the rc6.0 beta, i reported it many times but no one gave a crap......

6.1 did not resolve the issue.!
Just be patient, we'll get a reward someday as a reporter :)
lol ok i want fkn cookies
 
coffeecoco
Member Candidate
Member Candidate
Posts: 175
Joined: Wed Oct 12, 2005 1:17 pm

Re: v6.0 released

Sun Jun 09, 2013 10:01 am

I give up on Ros6, dear mikrotik, no offence but you release software way too early,
I'm a network corporate administrator
And a Linux server administrator, I manage the servers behind the development farms and Staging farms AND the Live production Farms.

You make have so many flaws in how you release software, I dont think you could fathorm the amount of detail we go though to make sure software is worthy, Frankly my personal opinion is i feel its careless.

I will give you credit, that you dont charge astronomical prices, and you might limit your staff, or have difficulty with getting enough staff, so okay credits to you.

but honestly, probably early days when mikrtik was released you had a alot of us consumers to help you test as the software was Very early, but your OVER the that Line, for what is accepted as early development, you have from a company that needs community support to selling production hardware/software

Your first thing was how many people Ranted at you for selling that CCR thing, and not telling people its a development type product, ive read the posts and read the comments.

So, here is the part where i stop ranting and try help, I have been a member for a long time, like 8 years now...
So please dont think this is another rant of someone who just wants to cry....

You need to be accepting that your running very low on the community that is willing to BETA test your software
this in turn makes it difficult for you to get response's before you " release "
This is why we see you guys say all the time " not one person reported this issue "
Also I have reported issues that went ignored, One of a few of my issues i reported you said you will fix, but it just never happened.

I dont know what else to say, I like you guys alot, I just want you to try redesign your testing platforms


I have to go back to version 5 because a problem i reported on the very first day you released the beta rc 6 has not been resolved.

Also Alot of companys are heading into PCI compliancy, I in fact am banned from using your product in anything i touch at work because of a survey, that went though some of our network guys, that it lacks support, and it full of bugs.....

The last time i spoke like this i tried to help you in setting up a Bug Ticketing System Like Source forge... ( downloadable)


Yours Truely
Mikrotik Fan.
 
coffeecoco
Member Candidate
Member Candidate
Posts: 175
Joined: Wed Oct 12, 2005 1:17 pm

Re: v6.0 released

Sun Jun 09, 2013 10:19 am

This is what i got when i downgraded, from ros6 to ros5

In the pictures below From bottom to TOP
you can see 3 x Local Bridges AND 2 x Bridge1

they mysteriously appeared after vanishing on ros6 every time i rebooted, HENCE why there are so many an indictation of how many times i had to re add the bridge interfaces, on this box alone.

On top of that, mikrotik there was issues with your static routes and metrics

I set a manage rule to mark routing, IE dual load balancer Nth Method, I know its setup correctly, Because I was involved in the creation of the first Load balancer scripts in 2005
Basicly when you set the static route with the route mark even or odd, it would not use it, just stayed "blue"
Screen Shot 2013-06-09 at 5.14.44 PM.png
Screen Shot 2013-06-09 at 5.14.08 PM.png
You do not have the required permissions to view the files attached to this post.
 
Diamond
newbie
Posts: 26
Joined: Tue Mar 19, 2013 7:11 pm
Location: RU

Re: v6.0 released

Sun Jun 09, 2013 10:31 am

Good day!
I wrote above about router rebooting on rc12. So.
I have installed Dude4.0beta3 package on the device (rc11). Updating to rc12 brought to reboots. Router worked on rc11 before today.
Today I tried to upgrade to ROS6.0 release and the router began reboots again :D Next, router has netinstalled again for ROS6.0 - and all stayed ok! After this Dude4.0beta3 has installed and all work!
These all say that the dude package brought to reboots after upgrading a release, or the updating process goes wrongly=)

P.S. This post is also in rc12 thread, just in case.
 
jezekus
just joined
Posts: 6
Joined: Sun Jun 09, 2013 9:08 pm

Re: v6.0 released

Sun Jun 09, 2013 9:26 pm

Hello I have upgraded 2x RB750GL from v5.25 and v5.19 to v6.0 and after upgrade everything was OK. Now I tried reset to default using reset button/reset hole and I'm unable to connect to these routers. They seems to not have IP of any kind (both were default 192.168.88.1).
Can somebody help me please?
 
andriys
Forum Guru
Forum Guru
Posts: 1192
Joined: Thu Nov 24, 2011 1:59 pm
Location: Kharkiv, Ukraine

Re: v6.0 released

Sun Jun 09, 2013 10:07 pm

Hello I have upgraded 2x RB750GL from v5.25 and v5.19 to v6.0 and after upgrade everything was OK. Now I tried reset to default using reset button/reset hole and I'm unable to connect to these routers. They seems to not have IP of any kind (both were default 192.168.88.1).
Can somebody help me please?
I've seen the same issue on RB751U-2Hnd and RB951-2n. On v6.0 there seem to be no such thing as default configuration, at least on these devices. On v6.1 rc1 (that rc1 that was available to downloaded on the day I was trying it, which is... probably nobody knows what exact version of v6.1 rc1 it was :? ) there already were such thing as default configuration, but it was "slightly" different from what we all used to see on the previous ROS versions:

Image

So. I guess your device has no IP address at the moment. Try connecting to your device using WinBox by MAC address.
 
heavyd
Frequent Visitor
Frequent Visitor
Posts: 85
Joined: Wed Aug 08, 2007 12:32 pm

Re: v6.0 released

Mon Jun 10, 2013 9:41 am

Anyone else have disabled wlan when the RB has been shutdown ? I have 3 sites and all 3 have donr this to me ..

Come on Mikrotik how can you release V6 when this is happening
 
reapster
just joined
Posts: 1
Joined: Mon Jun 10, 2013 8:01 pm

Re: v6.0 released

Mon Jun 10, 2013 8:10 pm

RouterOS 6.0 upgrade on RB532A goes something like:

Welcome to MikroTik Router Software remote installation
Press Ctrl-Alt-Delete to abort

<Usual netinstall stuff, key etc...>

Formatting disk.....

installed system-6.0
installed advanced-tools-6.0
installed dhcp-6.0
installed ipv6-6.0
installed mpls-6.0
installed multicast-6.0
installed ntp-6.0
installed openflow-6.0
installed ppp-6.0
installed routing-6.0
installed security-6.0
installed wireless-6.0
Writing configuration...

Software installed.
Press ENTER to reboot

... reboot ...

loading kernel from nand... OK
setting up elf image... OK
jumping to kernel code
opendir: No such file or directory
opendir: No such file or directory
ERROR: no system package found!
Kernel panic - not syncing: Attempted to kill init!


This happened when upgrading from 5.19, and when doing a fresh Netinstall with RouterOS 6. I'm guessing this isn't the expected result. Went back to 5.25 and all is fine.

Could this have something to do with some RB532As having 128MB flash, but RouterOS usually only using 64MB? (The boot loader is 2.18)
 
Diamond
newbie
Posts: 26
Joined: Tue Mar 19, 2013 7:11 pm
Location: RU

Re: v6.0 released

Mon Jun 10, 2013 11:10 pm

Good day!
I wrote above about router rebooting on rc12. So.
I have installed Dude4.0beta3 package on the device (rc11). Updating to rc12 brought to reboots. Router worked on rc11 before today.
Today I tried to upgrade to ROS6.0 release and the router began reboots again :D Next, router has netinstalled again for ROS6.0 - and all stayed ok! After this Dude4.0beta3 has installed and all work!
These all say that the dude package brought to reboots after upgrading a release, or the updating process goes wrongly=)

P.S. This post is also in rc12 thread, just in case.
I forgot to install ntp packet on previous state "all work" system. Did it, and RB951 began reboot. So this dude package damages the install manager? Don't uderstand.
Now I don't want install the dude because each upgrade of the system will occur rebooting...
 
ricky011
newbie
Posts: 35
Joined: Tue Jul 15, 2008 1:33 pm
Location: Serbia

Re: v6.0 released

Tue Jun 11, 2013 12:41 am

btw, another problem: facebook over ipv6 hanging, lagging, downgrade to 5.25 and problem solved... this is starting to be boring, please someone notify me when a usable ROSv6 arrives...
 
duvi
Frequent Visitor
Frequent Visitor
Posts: 70
Joined: Fri Jun 05, 2009 12:32 pm
Contact:

Re: v6.0 released

Tue Jun 11, 2013 2:27 am

btw, another problem: facebook over ipv6 hanging, lagging, downgrade to 5.25 and problem solved... this is starting to be boring, please someone notify me when a usable ROSv6 arrives...
Actually I've been experiencing the same with facebook over ipv6 in the last couple of days at multiple locations.
But I'm using openwrt on my home router, so I rather think this has to do something with facebook.
However, it started to work yesterday normally again, maybe you should give it another try.
 
alexanders
just joined
Posts: 10
Joined: Wed Apr 17, 2013 9:05 pm

Re: v6.0 released

Tue Jun 11, 2013 7:37 am

Hello, i'm facing with webfig problem. Webfig can't start in opera, just showing 'loading'.
rb750up, ros v.6.0, Opera 12.15 (build 1748), java v7 (update 21).
You do not have the required permissions to view the files attached to this post.
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Tue Jun 11, 2013 9:52 am

alexanders - it works fine in the newest Opera version (the silver icon in your start bar)
No answer to your question? How to write posts
 
User avatar
omidkosari
Trainer
Trainer
Posts: 617
Joined: Fri Sep 01, 2006 4:18 pm
Location: Iran , Karaj
Contact:

Re: v6.0 released

Tue Jun 11, 2013 10:24 am

After upgrade from 5.25 to 6.0 PPPoE client disconected after 3 hours on x86. System reboot PPPoE client conect again. Back to 5.25 all is OK.
Same problem with RB7xx . Manual disconnect and reconnect PPPoE client solves problem for few hours .
MTCNA , MTCRE, MTCWE, Mikrotik Certified Trainer
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Tue Jun 11, 2013 10:51 am

[quote="coffeecoco"][/quote]

Did you contact support with supout.rif file from v6.0 ? Tell me your ticket number, I will check what was found in this case.
No answer to your question? How to write posts
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Tue Jun 11, 2013 11:38 am

:shock: i'm gonna try this new v6.1 released

Edit:
tested 6.1 released (Jun/06/2013 16:11:56)
- NOT FIXED, error in usermanager web-ui (web-ui ignoring timezone setting)
- FIXED, ip > hotspot > active - Bytes Out, Packets Out, Tx Rate, Tx Rate stays in 0 bps :)
- NEW ERROR, on boot, there's an error about xxx...fastpath.ko not loading or something (can't afford to test that version again to see the msg again since alot of ppls will angry at me)

Back to 6.0rc14 again now (with error in usermanager web-ui (web-ui ignoring timezone setting) only)

Both of the above issues are fixed in v6.1 todays build
No answer to your question? How to write posts
 
pmaster
just joined
Posts: 1
Joined: Sun Aug 05, 2012 7:35 pm

Re: v6.0 released

Tue Jun 11, 2013 1:22 pm

link to full package of build 6.1 for mipsbe (with userman)
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Tue Jun 11, 2013 1:24 pm

link to full package of build 6.1 for mipsbe (with userman)
http://www.mikrotik.com/download/share/ ... es_6.1.zip
No answer to your question? How to write posts
 
kapnos
newbie
Posts: 30
Joined: Thu Dec 13, 2012 1:51 am

Re: v6.0 released

Tue Jun 11, 2013 1:27 pm

Any news about the missing graphs(cpu, memory, disk) on 6.0?
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Tue Jun 11, 2013 1:33 pm

Any news about the missing graphs(cpu, memory, disk) on 6.0?
yes, but you need to reinstall with netinstall for the fix to take effect
No answer to your question? How to write posts
 
Attila
newbie
Posts: 33
Joined: Sun Mar 18, 2012 1:57 pm

Re: v6.0 released

Tue Jun 11, 2013 1:39 pm

Dear Normis!

CCR1036 multicast routing (PIM-SM) same source to different interface is solved in 6.1 ?

Attila
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Tue Jun 11, 2013 1:45 pm

Dear Normis!

CCR1036 multicast routing (PIM-SM) same source to different interface is solved in 6.1 ?

Attila
What do you mean? Have you contacted support ?
No answer to your question? How to write posts
 
doush
Long time Member
Long time Member
Posts: 625
Joined: Thu Jun 04, 2009 3:11 pm

Re: v6.0 released

Tue Jun 11, 2013 1:51 pm

V6.0 RC14 (CCR 1036-12G-4S)

Bonding 2xGiga interfaces (802.3ad, L3 and L4 Hashing). Remote side is an Alcatel Metro Router.

Our transmit is flowing through only 1 interface instead of 2 interfaces and it is also suffering from low throuhput (only tx).
Although Alcatel is properly utilizing both channels while transmitting without any throuhput issues.

Mikrotik, this is serious. Could you please try to replicate ?
 
Attila
newbie
Posts: 33
Joined: Sun Mar 18, 2012 1:57 pm

Re: v6.0 released

Tue Jun 11, 2013 1:54 pm

Dear Normis!

Ticket#2013020566000411

Multicast routing (PIM-SM) same source to different interface doesn't work in CCR1036.
Same ROS version and same configuration (1. RP, 3. Interface) work like a charm in RB2011.

The problem exist with all RC ROS version and final 6.0 and CCR1036 firmware version (3.04,3.05).


Attila
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Tue Jun 11, 2013 1:54 pm

V6.0 RC14 (CCR 1036-12G-4S)

Bonding 2xGiga interfaces (802.3ad, L3 and L4 Hashing). Remote side is an Alcatel Metro Router.

Our transmit is flowing through only 1 interface instead of 2 interfaces and it is also suffering from low throuhput (only tx).
Although Alcatel is properly utilizing both channels while transmitting without any throuhput issues.

Mikrotik, this is serious. Could you please try to replicate ?
This topic is about v6.0 and v6.1, yet your report is about an RC version. Please upgrade to v6.1 (link is above) and see if the problem is still there.
No answer to your question? How to write posts
 
doush
Long time Member
Long time Member
Posts: 625
Joined: Thu Jun 04, 2009 3:11 pm

Re: v6.0 released

Tue Jun 11, 2013 2:09 pm

There is over 1250mbit passing through this router.

Are you sure that is it safe to try this pre-release version ?
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Tue Jun 11, 2013 2:10 pm

There is over 1250mbit passing through this router.

Are you sure that is it safe to try this pre-release version ?

You are currently on a RC version. Version posted here is a stable version. Yes, it is much better than yours.
No answer to your question? How to write posts
 
doush
Long time Member
Long time Member
Posts: 625
Joined: Thu Jun 04, 2009 3:11 pm

Re: v6.0 released

Tue Jun 11, 2013 2:13 pm

http://www.mikrotik.com/download/share/ ... le-6.1.npk


Above is the link ? or something else ?
 
Attila
newbie
Posts: 33
Joined: Sun Mar 18, 2012 1:57 pm

Re: v6.0 released

Tue Jun 11, 2013 2:19 pm

Dear Normis!

CCR1036 multicast routing (PIM-SM) same source to different interface is solved in 6.1 ?

Attila
What do you mean? Have you contacted support ?
Dear Normis!

Ticket#2013020566000411

Multicast routing (PIM-SM) same source to different interface doesn't work in CCR1036.
Same ROS version and same configuration (1. RP, 3. Interface) work like a charm in RB2011.

i.e.: Same IPTV channel routed to different interface at the same time only 1 of the clients is getting same stream.

CCR1036 multicast routing (PIM) configured (1.RP and 3. Interface). When the client watching Music Television (same multicast IP source) another client (set-top box) via different VLAN interface in CCR1036 (another network segment) can not watch Music Television at the same time and vice versa. Which client (set-top box) is watching Music Television for first... win...

So this is a big problem in IPTV environment with CCR1036.

The RB2011 in same network and same configuration works well with all ROS(5)(6) version.


Attila
 
kapnos
newbie
Posts: 30
Joined: Thu Dec 13, 2012 1:51 am

Re: v6.0 released

Tue Jun 11, 2013 2:57 pm

Any news about the missing graphs(cpu, memory, disk) on 6.0?
yes, but you need to reinstall with netinstall for the fix to take effect

Reinstall 6.0 or 6.1? Does the configuration get reseted?
 
Rudios
Forum Veteran
Forum Veteran
Posts: 966
Joined: Mon Mar 11, 2013 12:58 pm
Location: The Netherlands

Re: v6.0 released

Tue Jun 11, 2013 4:01 pm

Any news about the missing graphs(cpu, memory, disk) on 6.0?
yes, but you need to reinstall with netinstall for the fix to take effect
Nice there is a solution, bit am a little dissapointed I don't get any reply on my mails.
Have been given access to my device but did not get any feedback nor answers on my mail.
I will try to reinstall 6.0 on my affected device.
Testing setup with: 2 x RB750UP | 2 x RB750GL | 1 x RB951G-2HnD | 1 x RB2011UiAS-IN
 
User avatar
Stillhard
Frequent Visitor
Frequent Visitor
Posts: 82
Joined: Sun Jun 10, 2012 11:18 am
Location: Banten, Indonesia
Contact:

Re: v6.0 released

Tue Jun 11, 2013 6:04 pm

:shock: i'm gonna try this new v6.1 released

Edit:
tested 6.1 released (Jun/06/2013 16:11:56)
- NOT FIXED, error in usermanager web-ui (web-ui ignoring timezone setting)
- FIXED, ip > hotspot > active - Bytes Out, Packets Out, Tx Rate, Tx Rate stays in 0 bps :)
- NEW ERROR, on boot, there's an error about xxx...fastpath.ko not loading or something (can't afford to test that version again to see the msg again since alot of ppls will angry at me)

Back to 6.0rc14 again now (with error in usermanager web-ui (web-ui ignoring timezone setting) only)

Both of the above issues are fixed in v6.1 todays build
:-D GREAT JOB normis and all MT team!!!

tested 6.1 released (Jun/10/2013 16:26:01)
- FIXED, error in usermanager web-ui (web-ui ignoring timezone setting)
- FIXED, ip > hotspot > active - Bytes Out, Packets Out, Tx Rate, Tx Rate stays in 0 bps :)
- FIXED, on boot, there's an error about xxx...fastpath.ko not loading or something
 
wa4zlw
Member Candidate
Member Candidate
Posts: 169
Joined: Sat Jun 03, 2006 10:37 pm
Location: Blandon, PA
Contact:

Re: v6.0 released

Tue Jun 11, 2013 7:56 pm

I upgraded from 5.25 --> 6.0 on an RB450G that I manage and all hell broke loose. whole network went down on the inside. Turns out IP addresses weren't being leased or if they were the ACKs weren't coming back. Total disaster. Had to downgrade to 5.25 to get things back to normal.

Anyone have any ideas what went on here?

I successfully upgraded from 5.25 --> 6.0 on my watchguard x86 platforms.

Is 6.0 ok in the CCR?

THanks leon
 
User avatar
Stillhard
Frequent Visitor
Frequent Visitor
Posts: 82
Joined: Sun Jun 10, 2012 11:18 am
Location: Banten, Indonesia
Contact:

Re: v6.0 released

Tue Jun 11, 2013 8:17 pm

I upgraded from 5.25 --> 6.0 on an RB450G that I manage and all hell broke loose. whole network went down on the inside. Turns out IP addresses weren't being leased or if they were the ACKs weren't coming back. Total disaster. Had to downgrade to 5.25 to get things back to normal.

Anyone have any ideas what went on here?

I successfully upgraded from 5.25 --> 6.0 on my watchguard x86 platforms.

Is 6.0 ok in the CCR?

THanks leon
Use v6.1
- for CCR from http://www.mikrotik.com/download/share/ ... le-6.1.npk
- for x86 from http://www.mikrotik.com/download/share/ ... 86_6.1.npk
or from http://www.mikrotik.com/download/share/ ... es_6.1.zip

Edited typo: User to Use, thx chupa :lol:
Last edited by Stillhard on Wed Jun 12, 2013 7:45 am, edited 2 times in total.
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2298
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: v6.0 released

Tue Jun 11, 2013 8:19 pm


:-D GREAT JOB normis and all MT team!!!

tested 6.1 released (Jun/10/2013 16:26:01)
- FIXED, error in usermanager web-ui (web-ui ignoring timezone setting)
- FIXED, ip > hotspot > active - Bytes Out, Packets Out, Tx Rate, Tx Rate stays in 0 bps :)
- FIXED, on boot, there's an error about xxx...fastpath.ko not loading or something
Bug tracker would be very useful. It is complicated to read all topics and search bugs... Fixed bugs, etc...
Please make official BUG TRACKER

Something like this http://bugs.mikrotik-routeros.com/view_all_bug_page.php
Thanks
LAN, FTTx, Wireless. ISP operator
 
wa4zlw
Member Candidate
Member Candidate
Posts: 169
Joined: Sat Jun 03, 2006 10:37 pm
Location: Blandon, PA
Contact:

Re: v6.0 released

Tue Jun 11, 2013 8:54 pm

how does the user package have anything to do with ip address/dhcp???
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8321
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: v6.0 released

Tue Jun 11, 2013 9:50 pm

how does the user package have anything to do with ip address/dhcp???
he meant not 'user' but 'use' =)
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
przent
newbie
Posts: 40
Joined: Sat Feb 02, 2013 9:11 pm

Re: v6.0 released

Tue Jun 11, 2013 11:44 pm

+1 for BugTracker!
 
pvidal
newbie
Posts: 28
Joined: Fri May 11, 2012 6:18 pm
Location: Buenos Aires, Argentina
Contact:

Tue Jun 11, 2013 11:55 pm

Another +1 for Bugtracker!

Enviado desde mi GT-P5110 usando Tapatalk 2
Pablo J. Vidal
Certified MikroTik Consultant
http://www.snwifi.com.ar
Image
 
manson
newbie
Posts: 32
Joined: Thu Feb 14, 2013 9:41 am

Re: v6.0 released

Wed Jun 12, 2013 1:33 am

Hello,

There is a issue with DNS instance. I have added about 15000 static entries in /ip dns static to make DNS blackholing and dns is stopping to respond on dns query. CCR is responding for icmp echo, winbox is active etc... but DNS server crashes every once in a while.

I'm using CCR1036-12G-4S with RouterOS 6.1, same problem was on v6.0.
 
warn1ng
just joined
Posts: 22
Joined: Sun Jul 03, 2011 3:12 am

Re: v6.0 released

Wed Jun 12, 2013 1:43 am

 
jandafields
Forum Guru
Forum Guru
Posts: 1514
Joined: Mon Sep 19, 2005 6:12 pm

Re: v6.0 released

Wed Jun 12, 2013 4:39 am

The link is misspelled.

It should be:

http://www.mikrotik.com/download/share/ ... 6.1rc1.npk
 
lunchboxrts
Member Candidate
Member Candidate
Posts: 144
Joined: Sat Aug 19, 2006 6:40 am
Location: United States

Re: v6.0 released

Wed Jun 12, 2013 5:09 am

Hello,

There is a issue with DNS instance. I have added about 15000 static entries in /ip dns static to make DNS blackholing and dns is stopping to respond on dns query. CCR is responding for icmp echo, winbox is active etc... but DNS server crashes every once in a while.

I'm using CCR1036-12G-4S with RouterOS 6.1, same problem was on v6.0.
Don't do that, DNS on MikroTik is very basic. If you really need that many static entries use an external dns(bind etc).
 
User avatar
Stillhard
Frequent Visitor
Frequent Visitor
Posts: 82
Joined: Sun Jun 10, 2012 11:18 am
Location: Banten, Indonesia
Contact:

Re: v6.0 released

Wed Jun 12, 2013 7:50 am

The link is misspelled.

It should be:

http://www.mikrotik.com/download/share/ ... 6.1rc1.npk
No. don't use the rc, rc is for old release, it's 6.1 released, sorry if the link is not there, i guess MT team hasn't compiled it yet :D
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Wed Jun 12, 2013 9:33 am

this is the correct link

X86 http://www.mikrotik.com/download/share/ ... 86-6.1.npk
CCR http://www.mikrotik.com/download/share/ ... le-6.1.npk
PPC http://www.mikrotik.com/download/share/ ... pc-6.1.npk
MBE http://www.mikrotik.com/download/share/ ... be-6.1.npk
MLE http://www.mikrotik.com/download/share/ ... le-6.1.npk
ALL http://www.mikrotik.com/download/share/ ... es_6.1.zip

new build today includes a memory leak fix

changes:

What's new in 6.1 (2013-Jun-12 08:56):

*) pptp, l2tp - fixed crash when tunnel mru was too big and fragmented ip packet
was received;
*) hotspot - fixed problem when after upgrade hotspot html directory was empty;
*) ipv6 nd - dns dynamic-servers were not included in router advertisements;
*) winbox - fixed problem Switch menu disappeared on RB2011;
*) fixed memory amount issue on RB1100AHx2;
*) console - '/import' prints each command that is executed;
*) console - 'import' has new argument 'from-line' that starts executing
commands after specified line;
*) secure api - fixed problem when wrong client ip address was reported;
*) hotspot - fixed universal client;
*) api - added support for API over TLS (SSL);
*) api - api service is now enabled by default;
*) ppp - do not show R flag for locally authenticated users;
*) vrrp - fixed ah authentication;
*) webfig - added support for RADIUS authentication (via MS-CHAPv2);
*) ipsec - for peers with full IP address specified system will
autostart ISAKMP SA negotiation;
*) trafficgen - added inject-pcap command for replaying pcap files into network;
*) dns - retry queries with tcp if truncated results received;
*) improved queue statistics updating;
*) fix 1G linking with some Cisco devices (affects RB7xx, RB9xx, RB1100, RB2011, CCR);
No answer to your question? How to write posts
 
manson
newbie
Posts: 32
Joined: Thu Feb 14, 2013 9:41 am

Re: v6.0 released

Wed Jun 12, 2013 9:44 am

Hello,

There is a issue with DNS instance. I have added about 15000 static entries in /ip dns static to make DNS blackholing and dns is stopping to respond on dns query. CCR is responding for icmp echo, winbox is active etc... but DNS server crashes every once in a while.

I'm using CCR1036-12G-4S with RouterOS 6.1, same problem was on v6.0.
Don't do that, DNS on MikroTik is very basic. If you really need that many static entries use an external dns(bind etc).
I bought two CCR1036 to make dns cache with vrrp redundancy. Don't tell me this will not work. I think there is a issue in dns daemon. Without loaded static entries it's working flawless. So i think there has been an error of some kind.
 
ela002
Frequent Visitor
Frequent Visitor
Posts: 92
Joined: Tue May 31, 2005 4:19 am

Re: v6.0 released

Wed Jun 12, 2013 11:45 am

The latest version does it fix anything related to nat/pppoe connections? It seems pppoe over adsl modem bridge just hang.

The download links are too slow!!! 2 hours to download a small file?
 
manson
newbie
Posts: 32
Joined: Thu Feb 14, 2013 9:41 am

Re: v6.0 released

Wed Jun 12, 2013 11:58 am

Hello,

There is a issue with DNS instance. I have added about 15000 static entries in /ip dns static to make DNS blackholing and dns is stopping to respond on dns query. CCR is responding for icmp echo, winbox is active etc... but DNS server crashes every once in a while.

I'm using CCR1036-12G-4S with RouterOS 6.1, same problem was on v6.0.
Don't do that, DNS on MikroTik is very basic. If you really need that many static entries use an external dns(bind etc).
I bought two CCR1036 to make dns cache with vrrp redundancy. Don't tell me this will not work. I think there is a issue in dns daemon. Without loaded static entries it's working flawless. So i think there has been an error of some kind.
I've tested it's performance... BIND on single core machine is faster cache server then CCR. It's worst spent 2.000 $ ever.
Any plans to make it any less useless?
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.0 released

Wed Jun 12, 2013 12:02 pm

First of all, I wish to thank the Mikrotik team for their good work. You guys are awesome!

I have a question regarding this release. I've upgraded few days ago and now my router experiences a new memory consumption phenomenon (see the attachment). I would consider it as a memory leak bug, but since it is a major version upgrade prior reporting I'm just wondering are there any new caching services enabled in this particular release? If so, then I would like to know what exactly are those in order to disable them.

My configuration is:
x86 Router OS on a multicore CPU
two virtual machines on KVM (their normal memory consumption is visible on the left of the pic)
Web Proxy was always disabled and I also checked it first, when I saw the memory graphic.
Hotspot normally for 60-90 clients

The only thing I've changed in my config right after upgrade was enabling the mac-cookie option (which was my reason for upgrading, otherwise I never upgrade if everything is stable). Normis, if you will consider this issue as a bug, then I will send the supout.
drusha, did you contact support with supout.rif file before reboot and after reboot? please send those files
No answer to your question? How to write posts

Who is online

Users browsing this forum: Google [Bot] and 73 guests