Community discussions

MikroTik App
 
morf
Member Candidate
Member Candidate
Topic Author
Posts: 161
Joined: Tue Jun 21, 2011 5:31 pm
Location: Saint-Petersburg

CCR 1036 ROS 6.1 [Memory leak]

Sat Jun 08, 2013 7:47 pm

Works PPTP server and shaper simple queue. Memory leaks in about 1-2 days.

+ At higher loads, the shaper is not working correctly queue tree PCQ. Correctly works only simple queue.
You do not have the required permissions to view the files attached to this post.
 
morf
Member Candidate
Member Candidate
Topic Author
Posts: 161
Joined: Tue Jun 21, 2011 5:31 pm
Location: Saint-Petersburg

Re: CCR 1036 ROS 6.1 [Memory leak]

Sat Jun 08, 2013 8:42 pm

In Russia it is called a "a crutch" :)
You do not have the required permissions to view the files attached to this post.
 
morf
Member Candidate
Member Candidate
Topic Author
Posts: 161
Joined: Tue Jun 21, 2011 5:31 pm
Location: Saint-Petersburg

Re: CCR 1036 ROS 6.1 [Memory leak]

Sun Jun 09, 2013 12:54 pm

Period 1,5 day
You do not have the required permissions to view the files attached to this post.
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1734
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: CCR 1036 ROS 6.1 [Memory leak]

Mon Jun 10, 2013 3:06 pm

Did you emailed support 2 supout.rifs already? one with normal memory usage other with big memory usage from same power cycle???

also what build-time do you have, i have seen several already

and this is not the place to report issues - write to support
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24609
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: CCR 1036 ROS 6.1 [Memory leak]

Mon Jun 10, 2013 3:08 pm

Please make one supout.rif right after restart, and one right before restart. Send both to support@mikrotik.com

Make sure you have latest build: http://www.mikrotik.com/download/share/ ... le-6.1.npk
No answer to your question? How to write posts
 
morf
Member Candidate
Member Candidate
Topic Author
Posts: 161
Joined: Tue Jun 21, 2011 5:31 pm
Location: Saint-Petersburg

Re: CCR 1036 ROS 6.1 [Memory leak]

Mon Jun 10, 2013 3:51 pm

Take it
You do not have the required permissions to view the files attached to this post.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24609
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: CCR 1036 ROS 6.1 [Memory leak]

Mon Jun 10, 2013 3:52 pm

Please email to support
No answer to your question? How to write posts
 
n21roadie
Forum Guru
Forum Guru
Posts: 1896
Joined: Fri Aug 07, 2009 10:36 pm
Location: Limerick,Ireland

Re: CCR 1036 ROS 6.1 [Memory leak]

Mon Jun 10, 2013 6:05 pm

...............................................

and this is not the place to report issues - write to support
Yes I agree but it also very important that we the users of Mikrotik products can view potential issues being posted and that the questions are answered by Mikrotik, this way we as users can gain more knowledge of the product?
N21roadie,
Network 100% MT for Now?
 
morf
Member Candidate
Member Candidate
Topic Author
Posts: 161
Joined: Tue Jun 21, 2011 5:31 pm
Location: Saint-Petersburg

Re: CCR 1036 ROS 6.1 [Memory leak]

Mon Jun 10, 2013 6:11 pm

...............................................

and this is not the place to report issues - write to support
Yes I agree but it also very important that we the users of Mikrotik products can view potential issues being posted and that the questions are answered by Mikrotik, this way we as users can gain more knowledge of the product?
Need an bug tracker. All the big developers have it.
 
User avatar
Stillhard
Frequent Visitor
Frequent Visitor
Posts: 82
Joined: Sun Jun 10, 2012 11:18 am
Location: Banten, Indonesia
Contact:

Re: CCR 1036 ROS 6.1 [Memory leak]

Mon Jun 10, 2013 6:25 pm

Need an bug tracker. All the big developers have it.
How big is it for MT? :lol:
 
n21roadie
Forum Guru
Forum Guru
Posts: 1896
Joined: Fri Aug 07, 2009 10:36 pm
Location: Limerick,Ireland

Re: CCR 1036 ROS 6.1 [Memory leak]

Mon Jun 10, 2013 6:31 pm

@morf
I note your script for "Free Memory" and it reminds me of the script that would reboot router on high average CPU load, which only worked occasionally as with high CPU load, the average count (no matter how much I edited the number) would not complete sometimes and the router would just hang, I hope with memory it more successful?
N21roadie,
Network 100% MT for Now?
 
morf
Member Candidate
Member Candidate
Topic Author
Posts: 161
Joined: Tue Jun 21, 2011 5:31 pm
Location: Saint-Petersburg

Re: CCR 1036 ROS 6.1 [Memory leak]

Mon Jun 10, 2013 7:42 pm

@morf
I note your script for "Free Memory" and it reminds me of the script that would reboot router on high average CPU load, which only worked occasionally as with high CPU load, the average count (no matter how much I edited the number) would not complete sometimes and the router would just hang, I hope with memory it more successful?
Yes, this script works successfully on my CCR1036
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2314
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: CCR 1036 ROS 6.1 [Memory leak]

Mon Jun 10, 2013 9:46 pm

Need an bug tracker. All the big developers have it.
+1
LAN, FTTx, Wireless. ISP operator
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1871
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: CCR 1036 ROS 6.1 [Memory leak]

Tue Jun 11, 2013 2:16 am

...............................................

and this is not the place to report issues - write to support
Yes I agree but it also very important that we the users of Mikrotik products can view potential issues being posted and that the questions are answered by Mikrotik, this way we as users can gain more knowledge of the product?
Need an bug tracker. All the big developers have it.
Juniper or Cisco's bug trackers, where are they again ? ;)
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1734
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: CCR 1036 ROS 6.1 [Memory leak]

Tue Jun 11, 2013 8:34 am

Juniper or Cisco's bug trackers, where are they again ? ;)
Exactly!! :)

And then there is this phenomenon, that if somebody finds a bug, they think that everyone is affected by this bug, and everyone knows all details about it
And one more phenomenon - if bugtrackers are publicly available there will be whole movement of "me too"s that in fact doesn't have this problem, it is same like with diseases, more you read about them more you think you have one :).
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.
 
morf
Member Candidate
Member Candidate
Topic Author
Posts: 161
Joined: Tue Jun 21, 2011 5:31 pm
Location: Saint-Petersburg

Re: CCR 1036 ROS 6.1 [Memory leak]

Tue Jun 11, 2013 9:33 am


Juniper or Cisco's bug trackers, where are they again ? ;)
I'm sure they have their inner bug tracker or something similar. And as I'm sure that they have their beta-testers.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24609
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: CCR 1036 ROS 6.1 [Memory leak]

Tue Jun 11, 2013 9:34 am


Juniper or Cisco's bug trackers, where are they again ? ;)
I'm sure they have their inner bug tracker or something similar. And as I'm sure that they have their beta-testers.
MikroTik also has internal bug trackers.
No answer to your question? How to write posts
 
morf
Member Candidate
Member Candidate
Topic Author
Posts: 161
Joined: Tue Jun 21, 2011 5:31 pm
Location: Saint-Petersburg

Re: CCR 1036 ROS 6.1 [Memory leak]

Tue Jun 11, 2013 9:46 am


Juniper or Cisco's bug trackers, where are they again ? ;)
I'm sure they have their inner bug tracker or something similar. And as I'm sure that they have their beta-testers.
MikroTik also has internal bug trackers.
It's good.
First of all I want to say that I am a big fan of mikrotik.
So perhaps it makes sense to give access to it as "authorized" user mikrotik. Or something like that.
 
User avatar
samir494
Member Candidate
Member Candidate
Posts: 236
Joined: Thu Aug 06, 2009 11:27 am
Location: India

Re: CCR 1036 ROS 6.1 [Memory leak]

Tue Jun 11, 2013 10:23 am

Please make one supout.rif right after restart, and one right before restart. Send both to support@mikrotik.com

Make sure you have latest build: http://www.mikrotik.com/download/share/ ... le-6.1.npk

please shar chanlog of the same ,
Mistry Samir
Unique and Different
India
9920670022

Give me more Karma
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24609
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: CCR 1036 ROS 6.1 [Memory leak]

Tue Jun 11, 2013 10:25 am

What's new in 6.1 (2013-Jun-10 16:26):

*) pptp, l2tp - fixed crash when tunnel mru was too big and fragmented ip packet
was received;
*) hotspot - fixed problem when after upgrade hotspot html directory was empty;
*) ipv6 nd - dns dynamic-servers were not included in router advertisements;
*) winbox - fixed problem Switch menu disappeared on RB2011;
*) fixed memory amount issue on RB1100AHx2;
*) console - '/import' prints each command that is executed;
*) console - 'import' has new argument 'from-line' that starts executing
commands after specified line;
*) secure api - fixed problem when wrong client ip address was reported;
*) hotspot - fixed universal client;
*) api - added support for API over TLS (SSL);
*) api - api service is now enabled by default;
*) ppp - do not show R flag for locally authenticated users;
*) vrrp - fixed ah authentication;
*) webfig - added support for RADIUS authentication (via MS-CHAPv2);
*) ipsec - for peers with full IP address specified system will
autostart ISAKMP SA negotiation;
*) trafficgen - added inject-pcap command for replaying pcap files into network;
*) dns - retry queries with tcp if truncated results received;
*) improved queue statistics updating;
*) fix 1G linking with some Cisco devices (affects RB7xx, RB9xx, RB1100, RB2011, CCR);
No answer to your question? How to write posts
 
morf
Member Candidate
Member Candidate
Topic Author
Posts: 161
Joined: Tue Jun 21, 2011 5:31 pm
Location: Saint-Petersburg

Re: CCR 1036 ROS 6.1 [Memory leak]

Tue Jun 11, 2013 3:55 pm

Sent to you by e-mail files supout.rif before and after rebooting.
Ticket#2013061166000759
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2314
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: CCR 1036 ROS 6.1 [Memory leak]

Tue Jun 11, 2013 8:32 pm

It's good.
First of all I want to say that I am a big fan of mikrotik.
So perhaps it makes sense to give access to it as "authorized" user mikrotik. Or something like that.

It would be very useful. Internal bug tracker is nice, but only for you MT team. And what users and fans Mikrotik?
LAN, FTTx, Wireless. ISP operator
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24609
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: CCR 1036 ROS 6.1 [Memory leak]

Wed Jun 12, 2013 9:53 am

No answer to your question? How to write posts
 
morf
Member Candidate
Member Candidate
Topic Author
Posts: 161
Joined: Tue Jun 21, 2011 5:31 pm
Location: Saint-Petersburg

Re: CCR 1036 ROS 6.1 [Memory leak]

Wed Jun 12, 2013 1:06 pm

Normis, thank you.
After the upgrade passed about 2 hours. The result of the screenshot.
Memory also consumed, but less. I will watch today, will report on the results later.
You do not have the required permissions to view the files attached to this post.
 
User avatar
mishaM
Frequent Visitor
Frequent Visitor
Posts: 84
Joined: Sun Oct 25, 2009 1:48 pm
Location: Georgia

Re: CCR 1036 ROS 6.1 [Memory leak]

Wed Jun 12, 2013 1:12 pm

Dear Normis
I've tried this build on CCR and memory leak problem 6.1 (2013-Jun-10 16:26) persists. Is this problem/bug resolved on CCR in build 6.1 (2013-Jun-12 08:56), which you've mentioned in your post earlier?
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24609
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: CCR 1036 ROS 6.1 [Memory leak]

Wed Jun 12, 2013 1:28 pm

Dear Normis
I've tried this build on CCR and memory leak problem 6.1 (2013-Jun-10 16:26) persists. Is this problem/bug resolved on CCR in build 6.1 (2013-Jun-12 08:56), which you've mentioned in your post earlier?
have you contacted support with supout.rif files before/after reboot? maybe your problem is entirely different.
No answer to your question? How to write posts
 
User avatar
mishaM
Frequent Visitor
Frequent Visitor
Posts: 84
Joined: Sun Oct 25, 2009 1:48 pm
Location: Georgia

Re: CCR 1036 ROS 6.1 [Memory leak]

Wed Jun 12, 2013 1:36 pm

Dear Normis
I've tried this build on CCR and memory leak problem 6.1 (2013-Jun-10 16:26) persists. Is this problem/bug resolved on CCR in build 6.1 (2013-Jun-12 08:56), which you've mentioned in your post earlier?
have you contacted support with supout.rif files before/after reboot? maybe your problem is entirely different.
ok I`ll send the support.rif s before/after reboot to mikrotik support today.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24609
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: CCR 1036 ROS 6.1 [Memory leak]

Wed Jun 12, 2013 1:39 pm

.
new build is 1 hour ago. you have old build without this fix.

don't send files yet, try new build.
No answer to your question? How to write posts
 
User avatar
mishaM
Frequent Visitor
Frequent Visitor
Posts: 84
Joined: Sun Oct 25, 2009 1:48 pm
Location: Georgia

Re: CCR 1036 ROS 6.1 [Memory leak]

Wed Jun 12, 2013 1:41 pm

.
new build is 1 hour ago. you have old build without this fix.

don't send files yet, try new build.
ok , i`ll try and let you know.
 
User avatar
Stillhard
Frequent Visitor
Frequent Visitor
Posts: 82
Joined: Sun Jun 10, 2012 11:18 am
Location: Banten, Indonesia
Contact:

Re: CCR 1036 ROS 6.1 [Memory leak]

Wed Jun 12, 2013 2:42 pm

new build is 1 hour ago. you have old build without this fix.
OMG, an hour ago? lol i just finished downloading Jun/12/2013 08:56:21 build and it took me 2 hours to downloading it, is that the newest or i have to download it again to get the build you just mentioned?
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24609
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: CCR 1036 ROS 6.1 [Memory leak]

Wed Jun 12, 2013 2:44 pm

v6.1 even newer build is ready and has been released to the webpage :)

http://www.mikrotik.com/download

this download will be faster, it is from amazon cloud
No answer to your question? How to write posts
 
User avatar
Stillhard
Frequent Visitor
Frequent Visitor
Posts: 82
Joined: Sun Jun 10, 2012 11:18 am
Location: Banten, Indonesia
Contact:

Re: CCR 1036 ROS 6.1 [Memory leak]

Wed Jun 12, 2013 2:49 pm

v6.1 even newer build is ready and has been released to the webpage :)

http://www.mikrotik.com/download

this download will be faster, it is from amazon cloud
:shock: THUMBS UP! re-downloading again... thank you for the quick info normis.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24609
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: CCR 1036 ROS 6.1 [Memory leak]

Wed Jun 12, 2013 2:51 pm

This discussion was about an issue fixed before v6.1 was released. To stop confision, discussion is locked. New issues should go here: http://forum.mikrotik.com/viewtopic.php?f=2&t=73583
No answer to your question? How to write posts

Who is online

Users browsing this forum: Majestic-12 [Bot], nithinkumar2000, wichets and 114 guests