Community discussions

 
Ehman
Member
Member
Topic Author
Posts: 363
Joined: Mon Nov 15, 2010 10:49 pm

VPLS IP confussing-need help

Thu Jul 25, 2013 5:38 pm

Hi

I've got 3 networks on 2 routerboards and want to make a link using VPLS, but it gets confussed with all the IP's on each device.

on each device I've got the following IP ranges active

#1 = 10.0.0.0/16 -vpn network
#2 = 10.10.0.0/16 -main network
#3 = 192.168.1.0/24 -managed port network

but it only works if I disable #1 on both devices, I only want to use #2 network for this operation, so is there any way to slap! this thing into working? ..because its really annoying me, becuase I need my vpn network active but not for vpls activaty

Just a pity that EoIP is unstable when you unplug the cable between the 2 routers
My old EoIP thread of me moaning about EoIP http://forum.mikrotik.com/viewtopic.php?f=2&t=74999
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 5940
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: VPLS IP confussing-need help

Thu Jul 25, 2013 5:41 pm

You should run VPLS on loopback addresses.
 
Ehman
Member
Member
Topic Author
Posts: 363
Joined: Mon Nov 15, 2010 10:49 pm

Re: VPLS IP confussing-need help

Thu Jul 25, 2013 5:49 pm

You should run VPLS on loopback addresses.
I dont see where the loopback addresses are?

....I dont have any other options, because EoIP have lost its mind, and I dont know how to fix that issue and with "IP Tunnel" i cant do jack with, because I can add it in a bridge http://forum.mikrotik.com/viewtopic.php?f=2&t=74999
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 5940
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: VPLS IP confussing-need help

Thu Jul 25, 2013 5:51 pm

 
Ehman
Member
Member
Topic Author
Posts: 363
Joined: Mon Nov 15, 2010 10:49 pm

Re: VPLS IP confussing-need help

Thu Jul 25, 2013 6:11 pm

No success mate, vpls suck. I really think mikrotik should fix the EoIP issue that I moaned about, v6.2 doesnt make it any better tho

Who is online

Users browsing this forum: MSN [Bot] and 136 guests