I've following queues for my WAN interfaces on both routers and it works as excepted. Now I want to add PCQ to make sure that not one session is filling up the connection if there are other sessions. Where to I need to add the PCQ? with each /queue or is it enough if I set it for the parent? Do I need to set a limit-at and max-limit for each queue to make it work? Thx for your help.
Code: Select all
/queue tree add limit-at=8M max-limit=8M name="queue__interface_to_other_location" parent=_interface_to_other_location
/queue tree add name="queue__interface_to_other_location_1" packet-mark=prio1 parent="queue__interface_to_other_location" priority=1
/queue tree add name="queue__interface_to_other_location_2" packet-mark=prio2 parent="queue__interface_to_other_location" priority=2
/queue tree add name="queue__interface_to_other_location_3" packet-mark=prio3 parent="queue__interface_to_other_location" priority=3
/queue tree add name="queue__interface_to_other_location_4" packet-mark=prio4 parent="queue__interface_to_other_location" priority=4
/queue tree add name="queue__interface_to_other_location_5" packet-mark=no-mark parent="queue__interface_to_other_location" priority=5
/queue tree add name="queue__interface_to_other_location_6" packet-mark=prio6 parent="queue__interface_to_other_location" priority=6
/queue tree add name="queue__interface_to_other_location_7" packet-mark=prio7 parent="queue__interface_to_other_location" priority=7
/queue tree add name="queue__interface_to_other_location_8" packet-mark=prio8 parent="queue__interface_to_other_location" priority=8