Page 1 of 1

Simple queue v6 children priority issues

Posted: Wed Sep 11, 2013 2:12 am
by newranman
mikrotik simple queues

v5.25 v6 differences


Simple queues Priority, parent and children v5.25 vs v6.2 and 6.3, bug or just different?

v5.25 Target Upload and Download enabled but values for children not needed, set to unlimited, for children to see traffic used for priority

v6 Target Upload and Download for children must be specified, unlimited doesn't work, or no traffic gets in the queue

Thanks

Randy Newman

The following is the config:

I have one Simple queue set for the WAN interface with defined Upload and Download values
2 child simple queues:
one with packmark=mark-tele, priority 2
second with packmark=no-mark, priority 6

Works great in version 5 in version 6 the child queues dont see traffic, only way is to set values for Target Upload and Download Max Limit, unlimited doesn't work.

The following are different routers so queue names and interfaces are a little different.

v5 works as follows, also works if max-limit is defined say max-limit=3M/512k

0 name="ether1-ATT" target-addresses="" interface=ether1-gw-att parent=none
packet-marks="" direction=both priority=2 queue=default-small/default-small limit-at=0/0
max-limit=0/0 burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s
total-queue=default-small

1 name="Voip-ATT" target-addresses="" interface=ether1-gw-att parent=ether1-ATT
packet-marks=mark-tele direction=both priority=2 queue=default-small/default-small
limit-at=0/0 max-limit=0/0 burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s
total-queue=default-small

2 name="Not-Voip-ATT" target-addresses="" interface=ether1-gw-att parent=ether1-ATT
packet-marks=no-mark direction=both priority=6 queue=default-small/default-small
limit-at=0/0 max-limit=0/0 burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s
total-queue=default-small

v6 works as follows, does not work if max-limit=0/0

0 name="ATT" target=ether1-gw parent=none packet-marks="" priority=1/1
queue=default-small/default-small limit-at=0/0 max-limit=3M/512k
burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s total-priority=1

1 name="Voip-ATT" target=ether1-gw parent=ATT packet-marks=mark-tele
priority=2/2 queue=default-small/default-small limit-at=0/0
max-limit=3M/512k burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s
total-priority=2

2 name="Not-Voip-ATT" target=ether1-gw parent=ATT packet-marks=no-mark
priority=6/6 queue=default-small/default-small limit-at=0/0
max-limit=2560k/318k burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s
total-priority=6

Re: Simple queue v6 children priority issues

Posted: Mon Sep 16, 2013 12:33 am
by newranman
Anyone else experiencing this? I sent a email to support but no reply. Updated to 6.4 same thing.

Randy

Re: Simple queue v6 children priority issues

Posted: Tue Sep 17, 2013 2:26 am
by teknowene
Same for us!

Re: Simple queue v6 children priority issues

Posted: Wed Sep 18, 2013 9:11 am
by newranman
Got a reply from support change Queue Type from default-small to default for Target Upload, Target Download and Total Queue Type.

It works for both v5 and v6

Randy