Community discussions

 
converbit
just joined
Topic Author
Posts: 8
Joined: Wed Oct 28, 2009 5:21 am

Routing Public Address but ARP

Wed Sep 25, 2013 7:47 pm

I switched from provider and I am stuck with a stupid error that I can't find.

The provider has given me a /27 range of address.
They added one of their Router to act as the gateway taking one of my address for them. They use the .65
I have a Mikrotik after with the first address and this works fine which ends in .66
What I am trying to do is use the second address .67 but forward it to another mikrotik which is connected to another port on the first mikrotik.

Before, I was only adding Routes but unless I add the .67 in the list of Address in the first table, their router doesn't seem to know that we exist.

I tried adding it in the address so it responds to the ping. Ok for the .67 but I don't want it to answer to ping on my first Mikrotik.

I Added a NAt rule to DSTNAT .67 to DSTNAT the second router and did the opposite for SRCNAT. Nothing

Any idea?
 
Ivoshiee
Member
Member
Posts: 471
Joined: Sat May 06, 2006 4:11 pm

Re: Routing Public Address but ARP

Wed Sep 25, 2013 11:24 pm

Just add both MT routers to the same switch and no other mangling is needed. You can make a switch by bridging 2 MT ports together and assigning proper addresses to all connected devices.

Who is online

Users browsing this forum: MSN [Bot] and 55 guests