Community discussions

MikroTik App
 
kaushik2aki
just joined
Topic Author
Posts: 7
Joined: Sun Jul 21, 2013 9:23 pm

device dead after update

Fri Sep 27, 2013 9:37 pm

all_packages-mipsbe-6.4

if instal after device not work

win box not show device

how i recover
 
User avatar
pcunite
Forum Guru
Forum Guru
Posts: 1345
Joined: Sat May 25, 2013 5:13 am
Location: USA

Re: device dead after update

Fri Sep 27, 2013 9:44 pm

Download netinstall, install it, run it and hook up your PC to ether1. Hold down the reset switch on the back of the unit and power cycle.
 
kaushik2aki
just joined
Topic Author
Posts: 7
Joined: Sun Jul 21, 2013 9:23 pm

Re: device dead after update

Fri Sep 27, 2013 10:35 pm

Download netinstall, install it, run it and hook up your PC to ether1. Hold down the reset switch on the back of the unit and power cycle.

any video how to use Netinstall for metal rb5
 
Bi11
just joined
Posts: 24
Joined: Sat Oct 12, 2013 5:34 pm

Re: device dead after update

Tue Nov 05, 2013 12:04 pm

Download netinstall, install it, run it and hook up your PC to ether1. Hold down the reset switch on the back of the unit and power cycle.

any video how to use Netinstall for metal rb5
I followed instructions here:
http://forum.mikrotik.com/viewtopic.php?f=13&t=77999
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26322
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: device dead after update

Tue Nov 05, 2013 12:08 pm

all_packages-mipsbe-6.4

if instal after device not work

win box not show device

how i recover
Did you upload them ALL? There are too many packages, you must choose only the ones which you know you need. Installing all of them could affect performance of your router

Who is online

Users browsing this forum: EmuAGR and 81 guests