I did a rest configuration for my mikrotik router and remove the configuration script. But rightnow I only able to login using by the MAC address and I don't any IP address from all the router port. How configure the setting that I can use default login IP address which is 192.168.88.1 and also I don't wish to change any setting to default because I didn't successfully setup my hotspot which this setting.

Also my PC didn't get any IP address from the router while I'm using the cable.

Hello,

if you reset your router and removed the configuration, then you have no configuration!

If you can log into your router via MAC address, then open a new terminal window and type "setup"

Play around with that for a while and you should get something working.

Good reference: http://wiki.mikrotik.com/wiki/How_to_co ... ome_router

Have fun.

Hello,

if you reset your router and removed the configuration, then you have no configuration!

If you can log into your router via MAC address, then open a new terminal window and type "setup"

Play around with that for a while and you should get something working.

Good reference: http://wiki.mikrotik.com/wiki/How_to_co ... ome_router

Have fun.

May I know section I should refer?