Community discussions

MikroTik App
 
RobClem
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 50
Joined: Wed Jun 09, 2004 12:45 pm
Contact:

Bridging 2 wireless radios using MikroTik

Fri Sep 03, 2004 1:46 pm

We have built a Mikrotik solution that contains a VIA 600mhz board, two radio's, uses POE and all sits within a IP65 rated box , we want to use this to bring a signal in on the one radio interface and then broadcast it out again using a different ssid,channel etc. on the other radio.

We thought this would be simple but apparently you cannot use a simple bridge as you would do if this was a wired/wireless scenario any ideas as to what is the best way to achieve what we want to do ?

All answers as usual greatly appreciated
 
User avatar
mag
Member
Member
Posts: 376
Joined: Thu Jul 01, 2004 12:32 pm
Location: Cologne, NRW, Germany
Contact:

Re: Bridging 2 wireless radios using MikroTik

Fri Sep 03, 2004 1:50 pm

you cant use bridge together with station mode, which is needed for the uplink. have a look at the EoIP tunnel:

http://www.mikrotik.com/docs/ros/2.8/in ... ip.content
 
User avatar
mag
Member
Member
Posts: 376
Joined: Thu Jul 01, 2004 12:32 pm
Location: Cologne, NRW, Germany
Contact:

Re: Bridging 2 wireless radios using MikroTik

Sun Sep 05, 2004 9:54 am

i was told, there is a new "station-bridge" mode in 2.8.15.
haven't testet it yet.
you cant use bridge together with station mode, which is needed for the uplink. have a look at the EoIP tunnel:

http://www.mikrotik.com/docs/ros/2.8/in ... ip.content

Who is online

Users browsing this forum: Amazon [Bot], JR2 and 32 guests