Community discussions

MUM Europe 2020
 
User avatar
Stillhard
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 82
Joined: Sun Jun 10, 2012 11:18 am
Location: Banten, Indonesia
Contact:

Changelog RouterOS 6.7

Sun Nov 10, 2013 12:45 am

Changelogs for upcoming RouterOS 6.7
  • What's new in 6.7rc1 (2013-Nov-08 15:54):
    *) fixed hairpin nat on bridge with use-ip-firewall=yes;
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2301
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: Changelog RouterOS 6.7

Tue Nov 12, 2013 6:04 pm

What's new in 6.7rc1 (2013-Nov-15 10:45):

*) userman - fix crash on tilera;
*) fixed hairpin nat on bridge with use-ip-firewall=yes;
*) fixed vlan on bridge after reboot having 00:00:00:00:00:00 mac address;
*) address-list - allow manually adding timeoutable entries;
*) address-list - show dynamic entry timeout;
LAN, FTTx, Wireless. ISP operator
 
User avatar
Stillhard
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 82
Joined: Sun Jun 10, 2012 11:18 am
Location: Banten, Indonesia
Contact:

Re: Changelog RouterOS 6.7

Sat Nov 16, 2013 6:23 am

  • What's new in 6.7rc1 (2013-Nov-15 15:23):
    *) ipsec - fix policy bypass on IPv6 gre, ipip, eoip tunnels;
    *) userman - fix crash on tilera;
    *) fixed hairpin nat on bridge with use-ip-firewall=yes;
    *) fixed vlan on bridge after reboot having 00:00:00:00:00:00 mac address;
    *) address-list - allow manually adding timeoutable entries;
    *) address-list - show dynamic entry timeout;
 
User avatar
kometchtech
Member Candidate
Member Candidate
Posts: 194
Joined: Sat Jun 15, 2013 4:25 am
Location: Japan
Contact:

Re: Changelog RouterOS 6.7

Wed Nov 20, 2013 10:49 am

6.7rc1 version up in November 19? It seems to use, but do you know What changes?

Best regards
--
Routerboard Users Group JP
http://www.rb-ug.jp/
CCR1009-8G-1S-1S+, RB750Gr3, CRS226-24G-2S+, RB850Gx2, RB960PGS, CRS317-1G-16S+,
RB2011UAS, CRS125-24G-1S, RB962UiGS-5HacT2HnT, CRS212-1G-10S-1S+, RB3011UiAS
 
User avatar
armandfumal
Member Candidate
Member Candidate
Posts: 125
Joined: Wed Apr 25, 2012 5:50 pm
Location: Huldange,LUX
Contact:

Re: Changelog RouterOS 6.7

Thu Nov 21, 2013 11:26 pm

What's new in 6.7rc1 (2013-Nov-20 14:13):

*) dhcpv4 server - added REMOTE_ID option variable for relayed packets;
*) ipsec - fix policy bypass on IPv6 gre, ipip, eoip tunnels when policy uses protocol filter;
*) userman - fix crash on tilera;
*) fixed hairpin nat on bridge with use-ip-firewall=yes;
*) fixed vlan on bridge after reboot having 00:00:00:00:00:00 mac address;
*) address-list - allow manually adding timeoutable entries;
*) address-list - show dynamic entry timeout;
Armand Fumal
________________________________________________________________
MikroTik & Ubiquity
 
User avatar
kometchtech
Member Candidate
Member Candidate
Posts: 194
Joined: Sat Jun 15, 2013 4:25 am
Location: Japan
Contact:

Re: Changelog RouterOS 6.7

Fri Nov 22, 2013 10:50 am

Thanks!
--
Routerboard Users Group JP
http://www.rb-ug.jp/
CCR1009-8G-1S-1S+, RB750Gr3, CRS226-24G-2S+, RB850Gx2, RB960PGS, CRS317-1G-16S+,
RB2011UAS, CRS125-24G-1S, RB962UiGS-5HacT2HnT, CRS212-1G-10S-1S+, RB3011UiAS
 
TonyJr
Member Candidate
Member Candidate
Posts: 201
Joined: Sat Nov 12, 2011 1:30 am
Location: UK
Contact:

Re: Changelog RouterOS 6.7

Fri Nov 22, 2013 6:07 pm

What's new in 6.7rc2 (2013-Nov-22 15:45):

*) leds - inverted modem signal trigger, now it will trigger when the signal level rises above the treshold;
*) ipsec - added sha256 and sha512 support;
*) ipsec - proposal defaults changed to aes-128 and sha1 for both phase1 and phase2;
*) certificate - support ip, dns and email subject alternative names;
*) dhcpv4 server - added REMOTE_ID option variable for relayed packets;
*) ipsec - fix policy bypass on IPv6 gre, ipip, eoip tunnels when policy uses protocol filter;
*) userman - fix crash on tilera;
*) fixed hairpin nat on bridge with use-ip-firewall=yes;
*) fixed vlan on bridge after reboot having 00:00:00:00:00:00 mac address;
*) address-list - allow manually adding timeoutable entries;
*) address-list - show dynamic entry timeout;
 
User avatar
D1M0N
just joined
Posts: 13
Joined: Mon Aug 05, 2013 1:18 am
Location: Ukraine, Rivne
Contact:

Re: Changelog RouterOS 6.7

Sat Nov 23, 2013 5:19 pm

Where can I download 6.7rc2 ???
RB951G-2HnD
 
User avatar
kometchtech
Member Candidate
Member Candidate
Posts: 194
Joined: Sat Jun 15, 2013 4:25 am
Location: Japan
Contact:

Re: Changelog RouterOS 6.7

Mon Nov 25, 2013 3:11 pm

What's new in 6.7 (2013-Nov-25 10:22):

*) leds - inverted modem signal trigger, now it will trigger when the signal level rises above the treshold;
*) ipsec - added sha256 and sha512 support;
*) ipsec - proposal defaults changed to aes-128 and sha1 for both phase1 and phase2;
*) certificate - support ip, dns and email subject alternative names;
*) dhcpv4 server - added REMOTE_ID option variable for relayed packets;
*) ipsec - fix policy bypass on IPv6 gre, ipip, eoip tunnels when policy uses protocol filter;
*) userman - fix crash on tilera;
*) fixed hairpin nat on bridge with use-ip-firewall=yes;
*) fixed vlan on bridge after reboot having 00:00:00:00:00:00 mac address;
*) address-list - allow manually adding timeoutable entries;
*) address-list - show dynamic entry timeout;
--
Routerboard Users Group JP
http://www.rb-ug.jp/
CCR1009-8G-1S-1S+, RB750Gr3, CRS226-24G-2S+, RB850Gx2, RB960PGS, CRS317-1G-16S+,
RB2011UAS, CRS125-24G-1S, RB962UiGS-5HacT2HnT, CRS212-1G-10S-1S+, RB3011UiAS
 
maxiscool
just joined
Posts: 11
Joined: Mon Nov 11, 2013 10:47 am

Re: Changelog RouterOS 6.7

Tue Nov 26, 2013 10:10 am

Hi,

Do we know when 6.7 will be release?

Thanks.
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6283
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Re: Changelog RouterOS 6.7

Tue Nov 26, 2013 10:28 am

there is no release date set.

also 6.7rc2 has some special ppp patches, look more here regarding 6.7rc2
http://forum.mikrotik.com/viewtopic.php?f=2&t=79166&
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2301
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: Changelog RouterOS 6.7

Tue Nov 26, 2013 4:03 pm

What's new in 6.7 (2013-Nov-26 09:57):

*) poe - new poe controller firmware for RB750UP and OmniTIK UPA;

what changes?
LAN, FTTx, Wireless. ISP operator
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6283
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Re: Changelog RouterOS 6.7

Tue Nov 26, 2013 4:35 pm

it should be more precise and report proper values as there where issues observed that sometimes unrealistic reading was displayed.
 
willy
Frequent Visitor
Frequent Visitor
Posts: 64
Joined: Tue May 03, 2005 11:55 am

Re: Changelog RouterOS 6.7

Wed Nov 27, 2013 4:59 am

Sorry for a possible many asked question, but generally available anywhere the development releases of routeros? My devices affected in a bug in 6.6 (vlan on bridge), and i will be try, but also useful for "advanced" users used with caution. If not accessible generally, please give me download link for 6.7rc1. Thanks.
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2301
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: Changelog RouterOS 6.7

Wed Nov 27, 2013 9:23 am

write to support for acceess to prerelease page
LAN, FTTx, Wireless. ISP operator
 
dadaniel
Member Candidate
Member Candidate
Posts: 160
Joined: Fri May 14, 2010 11:51 pm

Re: Changelog RouterOS 6.7

Wed Nov 27, 2013 2:19 pm

it should be more precise and report proper values as there where issues observed that sometimes unrealistic reading was displayed.
could you please comment on the following questions:

which max. initial PoE current is possible with the current hardware/firmware?
which protection is built in and is it reversible/replaceable?

thank you very much!
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6283
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Re: Changelog RouterOS 6.7

Wed Nov 27, 2013 2:56 pm

as far as it should concern end-users - it is as before. Also, fw upgrade procedure is simplified.
 
Malosa
just joined
Posts: 14
Joined: Thu Nov 15, 2012 4:32 pm

Re: Changelog RouterOS 6.7

Wed Nov 27, 2013 6:28 pm

There is a bug with PPPoE client in RouterOS 6:

http://forum.mikrotik.com/viewtopic.php?f=2&t=78875

Basically the <<AC-Name=''>> folder in the request must be sent even if it's empty, like other routers do, but Mikrotik doesn't.

It's very important because some modems cannot be used. And it's an extremely easy bug to correct.

Thank you.
Last edited by Malosa on Thu Nov 28, 2013 12:34 am, edited 1 time in total.
 
User avatar
skot
Long time Member
Long time Member
Posts: 586
Joined: Wed Nov 30, 2011 3:05 am

Re: Changelog RouterOS 6.7

Wed Nov 27, 2013 7:21 pm

*) address-list - allow manually adding timeoutable entries;
*) address-list - show dynamic entry timeout;

Glad to get these features. They show up in CLI but not winbox/webfig.
I don't need any karma... I have Ιησους Χριστος!
 
User avatar
armandfumal
Member Candidate
Member Candidate
Posts: 125
Joined: Wed Apr 25, 2012 5:50 pm
Location: Huldange,LUX
Contact:

Re: Changelog RouterOS 6.7

Wed Nov 27, 2013 11:09 pm

What's new in 6.7 (2013-Nov-26 09:57):

*) poe - new poe controller firmware for RB750UP and OmniTIK UPA;
*) ipsec - added aes-ctr encryption mode;
*) leds - inverted modem signal trigger, now it will trigger when the signal level rises above the treshold;
*) ipsec - added sha256 and sha512 support;
*) ipsec - proposal defaults changed to aes-128 and sha1 for both phase1 and phase2;
*) certificate - support ip, dns and email subject alternative names;
*) dhcpv4 server - added REMOTE_ID option variable for relayed packets;
*) ipsec - fix policy bypass on IPv6 gre, ipip, eoip tunnels when policy uses protocol filter;
*) userman - fix crash on tilera;
*) fixed hairpin nat on bridge with use-ip-firewall=yes;
*) fixed vlan on bridge after reboot having 00:00:00:00:00:00 mac address;
*) address-list - allow manually adding timeoutable entries;
*) address-list - show dynamic entry timeout;
*) fixed l2mtu changing on CCRs - could cause port flapping;
*) disabling/enabling ethernet ports did not work properly on CCRs - could cause port flapping;
Armand Fumal
________________________________________________________________
MikroTik & Ubiquity
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2301
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: Changelog RouterOS 6.7

Thu Nov 28, 2013 2:53 pm

What's new in 6.7 (2013-Nov-28 12:53):

*) support Android usb tethering interface;
*) ipsec - added aes-gcm icv16 encryption mode;
*) wireless - improve rate selection for nstreme protocol
*) poe - new poe controller firmware for RB750UP and OmniTIK UPA;
*) ipsec - added aes-ctr encryption mode;
*) leds - inverted modem signal trigger, now it will trigger when the signal level rises above the treshold;
*) ipsec - added sha256 and sha512 support;
*) ipsec - proposal defaults changed to aes-128 and sha1 for both phase1 and phase2;
*) certificate - support ip, dns and email subject alternative names;
*) dhcpv4 server - added REMOTE_ID option variable for relayed packets;
*) ipsec - fix policy bypass on IPv6 gre, ipip, eoip tunnels when policy uses protocol filter;
*) userman - fix crash on tilera;
*) fixed hairpin nat on bridge with use-ip-firewall=yes;
*) fixed vlan on bridge after reboot having 00:00:00:00:00:00 mac address;
*) address-list - allow manually adding timeoutable entries;
*) address-list - show dynamic entry timeout;
*) fixed l2mtu changing on CCRs - could cause port flapping;
*) disabling/enabling ethernet ports did not work properly on CCRs - could cause port flapping;
*) fixed port flapping on CCR - could happen when having other than only-hardware-queue interface queue.

Note that having other interface queue than only-hardware-queue dramatically reduces performace, so should be avoided if possible;
LAN, FTTx, Wireless. ISP operator
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1729
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: Changelog RouterOS 6.7

Thu Nov 28, 2013 3:09 pm

*) fixed port flapping on CCR - could happen when having other than only-hardware-queue interface queue.
This is interesting - so basically if you have any queue tree and /interface queue isoverrided by it you can also might be affected by this issue....
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.
 
FernandoSuperGG
newbie
Posts: 42
Joined: Fri Sep 06, 2013 6:51 pm

Re: Changelog RouterOS 6.7

Fri Nov 29, 2013 3:33 am

*) support Android usb tethering interface;
This is what I'm talkig about!
 
User avatar
kometchtech
Member Candidate
Member Candidate
Posts: 194
Joined: Sat Jun 15, 2013 4:25 am
Location: Japan
Contact:

Re: Changelog RouterOS 6.7

Fri Nov 29, 2013 4:34 pm

What's new in 6.7 (2013-Nov-29 13:37):

*) support Android usb tethering interface;
*) ipsec - added aes-gcm icv16 encryption mode;
*) wireless - improve rate selection for nstreme protocol
*) poe - new poe controller firmware for RB750UP and OmniTIK UPA;
*) ipsec - added aes-ctr encryption mode;
*) leds - inverted modem signal trigger, now it will trigger when the signal level rises above the treshold;
*) ipsec - added sha256 and sha512 support;
*) ipsec - proposal defaults changed to aes-128 and sha1 for both phase1 and phase2;
*) certificate - support ip, dns and email subject alternative names;
*) dhcpv4 server - added REMOTE_ID option variable for relayed packets;
*) ipsec - fix policy bypass on IPv6 gre, ipip, eoip tunnels when policy uses protocol filter;
*) userman - fix crash on tilera;
*) fixed hairpin nat on bridge with use-ip-firewall=yes;
*) fixed vlan on bridge after reboot having 00:00:00:00:00:00 mac address;
*) address-list - allow manually adding timeoutable entries;
*) address-list - show dynamic entry timeout;
*) fixed l2mtu changing on CCRs - could cause port flapping;
*) disabling/enabling ethernet ports did not work properly on CCRs - could cause port flapping;
*) fixed port flapping on CCR - could happen when having other than only-hardware-queue interface queue.
Note that having other interface queue than only-hardware-queue dramatically reduces performace, so should be avoided if possible;
--
Routerboard Users Group JP
http://www.rb-ug.jp/
CCR1009-8G-1S-1S+, RB750Gr3, CRS226-24G-2S+, RB850Gx2, RB960PGS, CRS317-1G-16S+,
RB2011UAS, CRS125-24G-1S, RB962UiGS-5HacT2HnT, CRS212-1G-10S-1S+, RB3011UiAS
 
ckgth
Frequent Visitor
Frequent Visitor
Posts: 64
Joined: Wed Jun 06, 2007 5:03 pm

Re: Changelog RouterOS 6.7

Sat Nov 30, 2013 9:58 am

Hello,

we have Update an CCR-1036-12G-4S from 6.5 now to testing 6.7 because of port-flapping with 100MB Ports (this was absolutely not acceptable) and now we have "reboot by watchdog timer". With 6.5 this was not! No supout was generated....

Hey MT! I known, the price for this device in resources this have very,very good, but you *must* make Software, who control it good, basically of the standard network processes. I must have an good routing, but no "support for Android". This you can make later....What is with the slogan "Routing the World"?

You wrote in the change-log:
*) fixed l2mtu changing on CCRs - could cause port flapping;
*) disabling/enabling ethernet ports did not work properly on CCRs - could cause port flapping;
*) fixed port flapping on CCR - could happen when having other than only-hardware-queue interface queue.
I must think about that you now known this issues? Have you not probe this before you share 6.6 ?
sometimes it is better, to check the software and wait with an release and no release it with failures....


best regards
Christian
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24368
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Changelog RouterOS 6.7

Mon Dec 02, 2013 9:10 am

Hello,

we have Update an CCR-1036-12G-4S from 6.5 now to testing 6.7 because of port-flapping with 100MB Ports (this was absolutely not acceptable) and now we have "reboot by watchdog timer". With 6.5 this was not! No supout was generated....

Hey MT! I known, the price for this device in resources this have very,very good, but you *must* make Software, who control it good, basically of the standard network processes. I must have an good routing, but no "support for Android". This you can make later....What is with the slogan "Routing the World"?

You wrote in the change-log:
*) fixed l2mtu changing on CCRs - could cause port flapping;
*) disabling/enabling ethernet ports did not work properly on CCRs - could cause port flapping;
*) fixed port flapping on CCR - could happen when having other than only-hardware-queue interface queue.
I must think about that you now known this issues? Have you not probe this before you share 6.6 ?
sometimes it is better, to check the software and wait with an release and no release it with failures....


best regards
Christian

Please send your supout.rif file to support. Make the file after you have the reboot problem.
No answer to your question? How to write posts
 
User avatar
Hotz1
Member
Member
Posts: 391
Joined: Tue Oct 09, 2007 6:55 am

Re: Changelog RouterOS 6.7

Sun Dec 08, 2013 2:27 am

What's new in 6.7 (2013-Nov-26 09:57):

*) poe - new poe controller firmware for RB750UP and OmniTIK UPA;

what changes?
In my brief experience upgrading my test-bench's UPA from 5.26 to 6.7, now a UPA will power two RB411s in ports 2 and 3, but as soon as you try to power a third RB411 in either ports 4 or 5, they all start power-cycling. This is a mess! What happened?!!!

Fortunately, after downgrading back to 5.26, upgrading the PoE firmware put back the older version (2.1), and now it powers all four RB411s with no problem again.

Maybe this is "old news"; I waited until 6.5 before upgrading from 5.26, figuring any major bugs would have been addressed by now. On all the other equipment, 6.5 worked fine, but this is the first PoE-out device I have tried it on. Did this problem start with PoE firmware in 6.0, or are there some 6.x releases that still work?
Principal, Engineering
Cape Ann Communications, Inc.
Gloucester, MA, USA
 
User avatar
Arpanet
Member Candidate
Member Candidate
Posts: 268
Joined: Sat Aug 24, 2013 8:26 pm

Re: Changelog RouterOS 6.7

Fri Feb 14, 2014 9:06 pm

Please notice:
command
tls=yes/no
for
/tool email
has changed to
start-tls=yes/no
Arpanet.
There's no distance in the world.

Who is online

Users browsing this forum: dedysobr, ipfw, Public01 and 108 guests