Community discussions

MikroTik App
 
russman
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 53
Joined: Thu May 20, 2010 7:23 pm

Userman optimized for multi-core

Wed Nov 13, 2013 8:32 pm

I realize there are many radius options available besides Mikrotik's userman, and that dedicated Intel based machines can be setup to run Mikrotik with higher per core clock speeds.
However, it would be nice if the could modify the code to simply utilize the massive multi-core processing horsepower available with routers they are touting now. Below is an example of what I am seeing:

Image
 
russman
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 53
Joined: Thu May 20, 2010 7:23 pm

Re: Userman optimized for multi-core

Wed Nov 13, 2013 9:23 pm

I am looking in the profile info for that core and ~70% is ate up with "flash" and 30% for "User-Manager". Although it does need better multi-core support, I'd be interested to know the performance specs on the integrated 512MB NAND storage. I'm using a tiny fraction of the available 512MB currently. Ether beefing up the onboard NAND or a card reader/USB 3.0/SATA with some of the new flash technology could beef up storage IOPS substantially. Some low cost Flash drives on the market now support in excess of 100,000 IOPS. On that note, is TRIM supported in RouterOS?
 
russman
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 53
Joined: Thu May 20, 2010 7:23 pm

Re: Userman optimized for multi-core

Wed Nov 13, 2013 9:57 pm

Hmmm, still can't access userman web interface and it looks like a autosupout.rif was generated around the time this happened. In general userman is choking harder now than ever, possibly for aforementioned reasons and stepping up on hardware typically improved performance for awhile until customer load increased to the point where userman was unusable.

Our dedicated userman device history includes Cloudcore, the 1100AHx2, and the original 1100 through many iterations of RouterOS.
 
User avatar
kometchtech
Member Candidate
Member Candidate
Posts: 194
Joined: Sat Jun 15, 2013 4:25 am
Location: Japan
Contact:

Re: Userman optimized for multi-core

Thu Nov 14, 2013 4:21 am

There is no such data can provide, but the bias of the Core often occurs in the following equipment to own me.
This Will a matter of rOS?

CCR1016-12G
--
Routerboard Users Group JP
http://www.rb-ug.jp/
CCR1009-8G-1S-1S+, RB750Gr3, CRS226-24G-2S+, RB850Gx2, RB960PGS, CRS317-1G-16S+,
RB2011UAS, CRS125-24G-1S, RB962UiGS-5HacT2HnT, CRS212-1G-10S-1S+, RB3011UiAS
 
russman
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 53
Joined: Thu May 20, 2010 7:23 pm

Re: Userman optimized for multi-core

Thu Nov 14, 2013 9:17 pm

As you can see in the picture CCR1016-12G currently running ROS 6.3, however, I've seen this issue through many versions of ROS in 5.X and 6.X.

Who is online

Users browsing this forum: Chupaka, wonkedhan and 131 guests