Community discussions

MikroTik App
 
cutedrummerboy
Member Candidate
Member Candidate
Topic Author
Posts: 137
Joined: Thu Nov 14, 2013 6:32 pm

Solved: Routing Public IP

Sat Nov 23, 2013 10:20 pm

Let Say Router A have 3 clients on eth1 port with x.x.x.x, y.y.y.y, z.z.z.z public ip and eth1 port have t.t.t.t public ip which is acting as gateway for internal network. now eth2 of router A connected with ISP Router which is Router B's eth1 with a /30 subnet.

now i want to know the router B's configuration, that means how router B route those static IPs into the Router A's internal network

Thanks in advance
Last edited by cutedrummerboy on Tue Nov 26, 2013 12:36 pm, edited 1 time in total.
Device: RB2011UIAS-RM, RB750GL, CISCO SG300-28, UNIFI UAP-LR
 
waver
newbie
Posts: 49
Joined: Thu May 02, 2013 2:19 pm

Re: Routing Public IP

Sun Nov 24, 2013 11:00 am

Let Say Router A have 3 clients on eth1 port with x.x.x.x, y.y.y.y, z.z.z.z public ip and eth1 port have t.t.t.t public ip which is acting as gateway for internal network. now eth2 of router A connected with ISP Router which is Router B's eth1 with a /30 subnet.

now i want to know the router B's configuration, that means how router B route those static IPs into the Router A's internal network

Thanks in advance

With this configuration you need configure:
1.- Route 0.0.0.0/0, gateway (IP from eth1 of router B). On A router.
2.- "masquerade" for internet navigation on Router B.

I think with this configuration you will have intenet navigation. :)
Carlos Martínez Ramiro

MTCNA, MTCRE
 
cutedrummerboy
Member Candidate
Member Candidate
Topic Author
Posts: 137
Joined: Thu Nov 14, 2013 6:32 pm

Re: Routing Public IP

Sun Nov 24, 2013 1:10 pm

With this configuration you need configure:
1.- Route 0.0.0.0/0, gateway (IP from eth1 of router B). On A router.
2.- "masquerade" for internet navigation on Router B.

I think with this configuration you will have internet navigation. :)
Thanks waver

1. number 1 i already created but i didn't mention it in previous post. that is a must do option because i am not using nat.
2. can you elaborate the number 2 more

i am new to routeros, i am just learning. :)
Device: RB2011UIAS-RM, RB750GL, CISCO SG300-28, UNIFI UAP-LR
 
cutedrummerboy
Member Candidate
Member Candidate
Topic Author
Posts: 137
Joined: Thu Nov 14, 2013 6:32 pm

Re: Routing Public IP

Tue Nov 26, 2013 12:31 pm

this topic is solved. here is the answar:

http://community.ubnt.com/t5/airOS-Soft ... 671#M34630
Device: RB2011UIAS-RM, RB750GL, CISCO SG300-28, UNIFI UAP-LR
 
waver
newbie
Posts: 49
Joined: Thu May 02, 2013 2:19 pm

Re: Solved: Routing Public IP

Tue Nov 26, 2013 5:05 pm

Fantastic.

:)
Carlos Martínez Ramiro

MTCNA, MTCRE

Who is online

Users browsing this forum: anav, andlil, sindy, Zacharias and 65 guests