Community discussions

MikroTik App
 
cutedrummerboy
Member Candidate
Member Candidate
Topic Author
Posts: 137
Joined: Thu Nov 14, 2013 6:32 pm

Need a little help: RB750gl related question

Thu Jan 02, 2014 5:05 pm

Hi all, I have two Ethernet drop from two different network. and my current set up like this:

both are TP-Link wr740n v4.23 router with OpenWRT 12.09 and wi-fi is switched off. I only use them for routing purpose. I have other gears for wireless set up.

my home network is 172.18.3.0/27

1. router A WAN port have a single IP of network A which have internet and it is masquerade. gateway provided by my ISP
2. router A LAN port have 172.18.3.1/27
3. router A have a static route at LAN side for network 172.18.0.0/16, gateway is the router B LAN IP

4. router B WAN port have a single IP of network B which don't have internet access and not masquerade. there is no gateway
5. router B LAN port have 172.18.3.30/27
6. router B have a static route at WAN side for network 172.18.0.0/16, gateway is the next router of network B

I am willing to buy an rb750gl, now my question is can i replicate my set up with a single rb750gl??
Device: RB2011UIAS-RM, RB750GL, CISCO SG300-28, UNIFI UAP-LR
 
CelticComms
Forum Guru
Forum Guru
Posts: 1766
Joined: Wed May 02, 2012 5:48 am

Re: Need a little help: RB750gl related question

Fri Jan 03, 2014 10:36 am

Yes.
Interlynx | Networking and Information Security Consultants & Trainers | Email: routerlynx@gmail.com
BGP | EIGRP | OSPF | MPLS | Firewall | VPN | IPsec | Multicast | QOS | IPv4/6 | STP | VLAN | PON | AE | M2M | and more!

Who is online

Users browsing this forum: bwooce, Easpeak, eworm and 97 guests