Hi,

I'm trying to print some statistics using SNMP.
Executing "/interface wireless print oid" on a *station* gives me the following output:

[admin@station] > /interface wireless print oid
0 tx-rate=.1.3.6.1.4.1.14988.1.1.1.1.1.2.4
rx-rate=.1.3.6.1.4.1.14988.1.1.1.1.1.3.4
strength=.1.3.6.1.4.1.14988.1.1.1.1.1.4.4
ssid=.1.3.6.1.4.1.14988.1.1.1.1.1.5.4
bssid=.1.3.6.1.4.1.14988.1.1.1.1.1.6.4
frequency=.1.3.6.1.4.1.14988.1.1.1.1.1.7.4
band=.1.3.6.1.4.1.14988.1.1.1.1.1.8.4
tx-rate=.1.3.6.1.4.1.14988.1.1.1.3.1.2.4
rx-rate=.1.3.6.1.4.1.14988.1.1.1.3.1.3.4
ssid=.1.3.6.1.4.1.14988.1.1.1.3.1.4.4
bssid=.1.3.6.1.4.1.14988.1.1.1.3.1.5.4
client-count=.1.3.6.1.4.1.14988.1.1.1.3.1.6.4
frequency=.1.3.6.1.4.1.14988.1.1.1.3.1.7.4
band=.1.3.6.1.4.1.14988.1.1.1.3.1.8.4
noise-floor=.1.3.6.1.4.1.14988.1.1.1.3.1.9.4
overall-ccq=.1.3.6.1.4.1.14988.1.1.1.3.1.10.4

Walking the snmp tree does not return any of the mentioned oids.

[root@somehost ~]# snmpwalk -On -v 1 -c public routeros-station:161 | grep ".1.3.6.1.4.1.14988"
.1.3.6.1.2.1.1.2.0 = OID: .1.3.6.1.4.1.14988.1
.1.3.6.1.2.1.9999.1.1.1.2.0 = OID: .1.3.6.1.4.1.14988.1

Am i doing something wrong?
I am able to fetch other (uptime, memory, cpu) resources, just not the wireless ones.

I'm running version 6.7

Cheers,
Peter

Answering my own question, snmpwalk does NOT return the full table.
Query on *some* of the OIDs directly does work.

Regards,
Peter

Am i doing something wrong?
I am able to fetch other (uptime, memory, cpu) resources, just not the wireless ones.

Yes... RTFM - as some people say .
And now - try this:
snmpwalk -On -v 1 -c public routeros-station:161 .1.3.6.1 | grep ".1.3.6.1.4.1.14988"

You can even specify ".1" only - it doesn't matter, it gives you the whole tree, but without specifying any OID on snmpwalk parameters - it doesn't reach the MikroTik OIDs.