This two SXT SA are placed about 30sm one from other (at first it was for a test but I left them that way) in opposite direction + I have 3 more units on this collocation (OmniTik, 2x sxt)
frequencies are 5580 and 5700 channel 20Mhz width - both are p2mp SXTSA->2xSXTHP distance of clients are from 1km up to 2km (+I have OmniTIk about 2 meters from both units that operate on 5500MHz two SXTHn older version are set below 5300)
test is made in same time (parallel) on both units, TCP btest + actual Internet traffic
20Mhz channel width (not 40Mhz above,below), units are placed 30sm ,nstreme, P2MP, in same time both units can send almost 70Mbits TCP- throughput is almost max out amazing
I m talking about test in real world, area with high noise not in laboratory - but if I had little more CPU power
btest "throughput" can go up to 80Mbits excellent excellent done Mikrotik - cheap way to beat expensive gps syn what so ever if it works or does not
before that I had 2xgroove 23dbl than changed with sxtHP- but HP was much more powerful, thats why I created this topic QRT has 35Db - I had to change tx-power to 20db, had to set first HP to 5180 second to 5700 but performance was not even close to SXT-SA definitely it was collocation interference
You do not have the required permissions to view the files attached to this post.