Ticket#2013121066000963
When an eth port reaches full wirespeed, CPU reaches %100 traffic.
Profile shows Managment.
No fix in v6.10 too.
Mikrotik please fix this issue !
> [admin@E] /tool> profile
> NAME CPU USAGE
> snmp all 0%
> console all 0%
> networking all 2.9%
> winbox all 0%
> management all 88.8%
> idle all 8%
> routing all 0%
> bridging all 0%
> unclassified all 0%
>
>
> [admin@E] > int mon ether4
> name: ether4
> rx-packets-per-second: 36 158
> rx-drops-per-second: 0
> rx-errors-per-second: 0
> rx-bits-per-second: 47.5Mbps
> tx-packets-per-second: 125 432
> tx-drops-per-second: 0
> tx-errors-per-second: 0
> tx-bits-per-second: 983.5Mbps