Hi could anybody please help me out on this?
I have a setup with RB1100, 2 WAN lines, both have 1 static IP by ethernet connection.
WAN1 has 50MB bandwidth and WAN2 has 70MB.
LAN side I have 3 LANs.
here is the requirement, LAN1 using WAN1, LAN2 and LAN3 using WAN2
WAN1: 188.8.131.52/30 gw 184.108.40.206
WAN2: 220.127.116.11/30 gw 18.104.22.168
I knew the routing will only choose the nearest route. if I just put 3 LANs in NAT masquerade , it will all go out by WAN1.
What should I do to make the setup work. please help , a example will be very appreciated.