Page 1 of 1

Newsletter 55 - new products!

Posted: Fri Mar 07, 2014 9:32 am
by normis
This newsletter introduces some new products, and shows what happened at the MUM in Italy:

http://download2.mikrotik.com/news55.pdf

Re: Newsletter 55 - new products!

Posted: Fri Mar 07, 2014 10:20 am
by sashavl
Finnaly wireless controller.

Re: Newsletter 55 - new products!

Posted: Sat Mar 08, 2014 7:26 am
by jarda
Why is mAP still without price?

Sent from Android by Tapatalk.

Re: Newsletter 55 - new products!

Posted: Sat Mar 08, 2014 10:15 am
by jaykay2342
I'm sill wondering whether RB260GSp will have an SPF slot or not?

Re: Newsletter 55 - new products!

Posted: Sat Mar 08, 2014 10:25 am
by honzam
I'm sill wondering whether RB260GSp will have an SPF slot or not?
have

Re: Newsletter 55 - new products!

Posted: Sat Mar 08, 2014 1:17 pm
by payday
Why is mAP still without price?
And availability? :)

Re: Newsletter 55 - new products!

Posted: Sun Mar 09, 2014 2:23 am
by cheeze
Is the RB850x2 similar to the Ubiquiti Edgerouter?

Also is availability for that model supposed to be May?

Re: Newsletter 55 - new products!

Posted: Sun Mar 09, 2014 9:24 pm
by snons
 CCR1072 (72 core Tilera CPU, 8x 10GBit SFP+, dual PSU and more, coming Q4, 2014)
it will be mine :D :D :D

Re: Newsletter 55 - new products!

Posted: Mon Mar 10, 2014 2:26 pm
by RabbitAtNet
Hi there,

I am curious about the suggest sales prices and the general availability of the new devices. Can you provide me with a rough estimate for the new products? Which quarter are they shipping?
I am especially interested in the mAP, as it might solve a couple of issues I have ...

Re: Newsletter 55 - new products!

Posted: Mon Mar 10, 2014 2:26 pm
by timberwolf
Any more details about the RB850Gx2?
I started a thread here: http://forum.mikrotik.com/viewtopic.php?f=3&t=82684

Re: Newsletter 55 - new products!

Posted: Mon Mar 10, 2014 11:23 pm
by saloustrosm
Normis,

Any thoughts for adding the mAP in the RouterBoard section without case, wlan and the power adapter in a more convenient place for OEM applications?

I am saying that because as it looks like, the mAP is going to be the ultimate VPN solution for OEM and i think it worth it because it will be
a new kind in the RouterBoard family without too much effort.

I am renting machines to my customers and i need to monitor them for providing SLA, cost etc and i am struggling to fit the RB750 inside but all i want is 2 ports (one for the machine and the second for the VPN)

Also doubling the disk size? :D

Re: Newsletter 55 - new products!

Posted: Tue Mar 11, 2014 9:06 am
by normis
Hi there,

I am curious about the suggest sales prices and the general availability of the new devices. Can you provide me with a rough estimate for the new products? Which quarter are they shipping?
I am especially interested in the mAP, as it might solve a couple of issues I have ...
It's all in the PDF document

Re: Newsletter 55 - new products!

Posted: Tue Mar 11, 2014 4:17 pm
by leonet45
are you planning good-looking indoor case for mAP? Something like Unifi o Ruckus?

Re: Newsletter 55 - new products!

Posted: Tue Mar 11, 2014 4:17 pm
by normis
are you planning good-looking indoor case for mAP? Something like Unifi o Ruckus?
mAP is already in an indoor case.

Re: Newsletter 55 - new products!

Posted: Tue Mar 11, 2014 4:29 pm
by saloustrosm
Any answer to my question?

Re: Newsletter 55 - new products!

Posted: Tue Mar 11, 2014 4:35 pm
by leonet45
are you planning good-looking indoor case for mAP? Something like Unifi o Ruckus?
mAP is already in an indoor case.
I can not imagine this case in the lobby of the Sheraton Hotel. Some places need a prettier case and that is why I refer a ruckus or unifi.

See this, http://www.rfelements.com/en/products/e ... ox-inspot/

They have the solution to products that are missing. Why do you not manufacture directly? a simple plastic housing can make a difference

Re: Newsletter 55 - new products!

Posted: Tue Mar 11, 2014 4:45 pm
by normis
are you planning good-looking indoor case for mAP? Something like Unifi o Ruckus?
mAP is already in an indoor case.
I can not imagine this case in the lobby of the Sheraton Hotel. Some places need a prettier case and that is why I refer a ruckus or unifi.

See this, http://www.rfelements.com/en/products/e ... ox-inspot/

They have the solution to products that are missing. Why do you not manufacture directly? a simple plastic housing can make a difference
It is very small, 6x6 cm! And why would you place it in a visible location?

Re: Newsletter 55 - new products!

Posted: Tue Mar 11, 2014 4:46 pm
by normis
Any answer to my question?
Currently we have no plan to offer it without case and PSU. Maybe if there will be significant demand.

Re: Newsletter 55 - new products!

Posted: Tue Mar 11, 2014 9:24 pm
by dhanamnetworks
I need new product for 12x1G Ethernet and 12 SFP and 2 SFP+ Switch for campus use
another one 20 SFP and 4x1G Ethernet 2 SFP+ Switch Fiber to home (Plots, Hotels)
Small Router with 1 SFP and 5x1G Ethernet with 1600mw 5 to 10 dbi mimo (Rooms, Office, Hostel)

Re: Newsletter 55 - new products!

Posted: Tue Mar 11, 2014 9:56 pm
by JanezFord
I need new product for 12x1G Ethernet and 12 SFP and 2 SFP+ Switch for campus use
another one 20 SFP and 4x1G Ethernet 2 SFP+ Switch Fiber to home (Plots, Hotels)
Small Router with 1 SFP and 5x1G Ethernet with 1600mw 5 to 10 dbi mimo (Rooms, Office, Hostel)
You don't need 1600mw wireless for Rooms, Office, Hostel ... keep in mind it is not only how far can your signal go, but also if signal from your clients will get back ... in this kind of setup you will be dealing with laptops (100mw), tablets (80mw) and phones (50mw) ... what use is to get your signal kilometers away if devices you are targeting can respond only about a fraction of that distance ... boosting power on your AP will not increase power on your clients devices. Solution is to place more devices with LOWER power and nonoverlaping channels.

JF.

Re: Newsletter 55 - new products!

Posted: Wed Mar 12, 2014 8:17 am
by raz
What about the new Routing Engine?

Re: Newsletter 55 - new products!

Posted: Wed Mar 12, 2014 10:19 am
by nz_monkey
What about the new Routing Engine?
+1 :)

Re: Newsletter 55 - new products!

Posted: Fri Mar 21, 2014 3:16 pm
by MarcB
Hi Guys,
The new products look great and I can't wait to et my hands on the CCR1072 as this looks like it has the ports that we need.

Its great that MikroTik have models with multicore processors, but none of the firmware can use more than a single thread at the moment!

We have a few CCR1036 routers which work great, but we run BGP on them with full routing tables and the BGP process is only using 1 core which is constantly running at 100%.
We have just installed the new v6.11 firmware which has reduced the CP usage slightly, but it is still only using 1 ore at a time for BGP.
One of the routers took 7 minutes to load the full routing table from 1 BGP peer which is quite a long time.

When are MikroTik going to get multithread support on the firmware so that we can make full use f the powerful multicore processors?

Kind regards,
Marc

Re: Newsletter 55 - new products!

Posted: Fri Mar 21, 2014 3:39 pm
by normis
but none of the firmware can use more than single thread at the moment!
this is most certainly not true
We have a few CCR1036 routers which work great, but we run BGP on them with full routing tables and the BGP process is only using 1 core which is constantly running at 100%.
only loading of the table works on one core. all routing itself works on all cores, as do most other features. you have basically stumbled on one of the last remaining single threaded processes

Re: Newsletter 55 - new products!

Posted: Fri Mar 21, 2014 4:09 pm
by MarcB
Hi Guys,
Once the routing is received we are still seeing high individual core usage.
Once BGP has processed all of the routes it generally doesn't have to process many routes as the only change a little.

We have been asking for BGP to be made multithreaded for quite some time as we are desperate to be able to make full use of the multicore processors.

It would be nice if we could actually set a maximum number of cores that BGP could use.
If we could also set this for OSPF as well it would make the routers very powerful.

Please let us know when the BGP process will be multicore capable and if we will be able to set the maximum number of cores that we want it to run on.

Kind regards,
Marc

Re: Newsletter 55 - new products!

Posted: Fri Mar 21, 2014 4:18 pm
by normis
Our whole routing subsystem will have to be made again. We are working on new routing engine for the future v7, but I can't make promises about that, too early to tell.

Re: Newsletter 55 - new products!

Posted: Fri Mar 21, 2014 4:34 pm
by MarcB
Hi Guys,
It would be useful for us (and other MikroTik uses) to know exactly what processes or features are multithread supported.
Could you post a complete list of what features / modules or processes will work with multiple cores and how many cores they will work with maximum?

If you could ask you development team to see how easy (or how hard) it would be t make the routing subsystem work with at least half the number of cores in the CCR series of routers as this would be a vast improvement on speed f the device and BGP loading times.

Kind regards,
Marc

Re: Newsletter 55 - new products!

Posted: Tue Mar 25, 2014 9:17 pm
by pdf
This newsletter introduces some new products, and shows what happened at the MUM in Italy:

http://download2.mikrotik.com/news55.pdf
hi normis

1) is the p2p parabolic antenna only dual polarization or there is a 3 pol antenna (I never saw a tripol parabolic dish but but curious to hear about that... who knows)
2) any indoor/outdoor case for the RB953GS-5HnT ?

Thank you

Re: Newsletter 55 - new products!

Posted: Wed Mar 26, 2014 9:13 am
by normis
pdf:

1. no tripple polarization
2. not yet

Re: Newsletter 55 - new products!

Posted: Wed Mar 26, 2014 9:35 am
by angboontiong
when RB953GS-5HnT available ???

Re: Newsletter 55 - new products!

Posted: Wed Apr 02, 2014 8:44 am
by infused
Dual power supplies... thank god. I'd buy it just for that. Now we are getting to enterprise level (please no adapters).

Any idea on pricing for that beast? (CCR)

Re: Newsletter 55 - new products!

Posted: Mon Oct 20, 2014 8:32 pm
by samjan
To Mikrotik staff
How can we use MIKROTIK mANT30 PA with MIKROTIK NetMetal 5 (RB922UAGS-5HPacT-NM) triple version?
is it really use tree pol together eith one dish?

Re: Newsletter 55 - new products!

Posted: Mon Oct 20, 2014 10:35 pm
by jarda
You can also switch off one chain...