Hello, everyone.
Currently, he is to verify the CRS226, but if you use a 1Gb-SFP module in SFP + port, would be Linkup properly?
In my environment, symptoms SFP module is not recognized properly, repeat the Linkdown and LinkUp has occurred.
Further, looking at the Interface information, the value of the bias voltage and is not acquired successfully.
For example)
sfp-temperature: 0C
sfp-tx-power: 2147483647dBm
SFP module having tried so far are as follows.
FINISAR CORP.
· FTLF8519P2BNL-AJ
· FTLF8524P2BNV-FJ
· FTLF8519P2BNL
SumitomoElectric
· SCP6584-GL-CTH
AlliedTellesis
· FTLF8519P2BNL-AJ
AVAGO
· AFBR-57R6AEZ-HP
CISCO-FINISAR
· FTLF8519P2BCL-CS
Would not those who have the same symptoms in the direction of others?
Best regards.
[Ticket # 2014040766000698]