Community discussions

MikroTik App
 
User avatar
krisan
newbie
Topic Author
Posts: 28
Joined: Wed Aug 04, 2010 11:06 pm

How do i make device on a LAN wit public ip to get to net

Thu May 15, 2014 4:49 pm

Hello everyone, i need your assistance in assigning public ip address to a client on my LAN.
We are an ISP, we are running a bridge network and i am using mikrotikOS as my gateway. I have a client that want to be able to access his DVR to view his cameras from anywhere outside my network and I have a spare public ip address that i want to use for him.
I need someone to tell me on how to set him up on my (MIKROTIK) gateway.
Looking forward to quick response.

regards to you all
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 2950
Joined: Tue Feb 25, 2014 12:49 pm
Location: Capalbio, Tuscany, Italy

Re: How do i make device on a LAN wit public ip to get to ne

Thu May 15, 2014 8:19 pm

Do not give the address to the client, or your network will be flooded by all the junk traveling on the net,
instead make NAT rules for the camera...
I'm Italian, not English. Sorry for my imperfect grammar.
 
User avatar
krisan
newbie
Topic Author
Posts: 28
Joined: Wed Aug 04, 2010 11:06 pm

Re: How do i make device on a LAN wit public ip to get to ne

Fri May 16, 2014 12:38 am

Do not give the address to the client, or your network will be flooded by all the junk traveling on the net,
instead make NAT rules for the camera...





please i would like you to help me with the command to do it.
Thanks
 
sashavl
Frequent Visitor
Frequent Visitor
Posts: 56
Joined: Mon Nov 01, 2010 8:19 pm
Contact:

Re: How do i make device on a LAN wit public ip to get to ne

Fri May 16, 2014 12:51 am

You usually do that by making one-TO-one NAT on your gateway. If you really want some node to have public IP you need to route it to next hop.

Who is online

Users browsing this forum: Engineer82, mafiosa, matd and 202 guests