Community discussions

 
santa
newbie
Topic Author
Posts: 43
Joined: Sun Jul 06, 2014 10:53 pm
Location: POLAND, Gdansk

Multiple address list assignment using radius server

Sun Jul 06, 2014 11:09 pm

Guys,

I use dhpd server with radius authentication. You can find simple client configuration below.
"01:02:03:04:05:06"  Cleartext-Password := "", NAS-Identifier == "mt-core", NAS-IP-Address == "10.1.1.1", Auth-Type := Accept
        Framed-IP-Address = 10.1.1.10,
        Framed-IP-Netmask = 255.255.255.0,
        Mikrotik-Address-List = "clients_tariff1"
Clients are assigned to the address list, which are then used in PCQ setup. It's a pretty standard configuration, I think.

The question is: is there any possibility to add client to more than one address list using radius? I use address lists for queues and WAN assignment, so the client could be assigned to two lists, for example "clients_tariff1" and "clients_wan1".
 
santa
newbie
Topic Author
Posts: 43
Joined: Sun Jul 06, 2014 10:53 pm
Location: POLAND, Gdansk

Re: Multiple address list assignment using radius server

Sat Jul 12, 2014 9:17 pm

I've tried to use different operator:
Attribute: +=
- Always matches as a check item, and adds the current attribute with value to the list of configuration items.
- As a reply item, it has an identical meaning, but the attribute is added to the reply items.
Mikrotik-Address-List += "clients_tariff1",
Mikrotik-Address-List += "clients_wan1"
but without success, so it is probably impossible to do that :).
 
santa
newbie
Topic Author
Posts: 43
Joined: Sun Jul 06, 2014 10:53 pm
Location: POLAND, Gdansk

Re: Multiple address list assignment using radius server

Mon Aug 18, 2014 7:38 pm

What's new in 6.19rc9 (2014-Aug-15 15:44):
*) dhcpv4 server - support multiple radius address lists;
Yes, now it's working :). Great news!
You do not have the required permissions to view the files attached to this post.

Who is online

Users browsing this forum: MSN [Bot] and 105 guests