Community discussions

 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24272
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

v6.16 RC test release now includes 802.11ac support

Wed Jul 09, 2014 1:19 pm

We are happy to announce 802.11ac support in RouterOS. Before we make this a general release, we would like to give you, the forum users, the ability to test it first.
802.11ac support is enabled for QCA9880/9882 rev2 (-BR4A) wireless chipsets, and wireless-fp package must be used. It is included in the general combined package, no separate downoad necessary

Other changes:
What's new in 6.16 (2014-Jul-17 13:12):

*) winbox - fixed random disconnection over encrypted tunnels;
*) l2tp, pptp, pppoe - fixed possible packet corruption when encryption was enabled;
*) ovpn - fixed ethernet mode;
*) certificates - use SHA256 for fingerprinting;
*) ipsec - fix AH proposal and problem when sometimes policy was not generated;
*) snmp - support AES encryption (rfc3826);
*) l2tp server: added option to enable IPsec automatically;
*) poe-out: added power-cycle-ping and power-cycle-interval settings;
*) gps - increased retry duration to 30 seconds;
*) time - on routerboards, current time is saved in configuration on reboot
and on clock adjustment, and is used to set initial time after reboot;
*) sntp - disabling/enabling client was causing dynamic-servers to be ignored
(bug introduced in 6.14);
*) CCR - fixed rare file system corruption when none
of configuration could be changed or some of it disappeared;
*) ipsec - allow multiple encryption algorithms per peer;
*) email - support tls only connections;
*) smb - fixed usb share issues after reboot
*) snmp - fix v3 protocol time window checks;
*) updated timezone information;
*) quickset - added VPN settings for HomeAP mode;
*) latency improvements on CCR devices;
Download links

CCR: http://www.mikrotik.com/download/share/ ... latest.npk
MIPS-BE: http://www.mikrotik.com/download/share/ ... latest.npk
MIPS-LE: http://www.mikrotik.com/download/share/ ... latest.npk
PPC: http://www.mikrotik.com/download/share/ ... latest.npk
x86: http://www.mikrotik.com/download/share/ ... latest.npk
ALL file ZIP: http://www.mikrotik.com/download/share/ ... latest.zip
No answer to your question? How to write posts
 
onnoossendrijver
Member
Member
Posts: 418
Joined: Mon Jul 14, 2008 11:10 am
Location: The Netherlands

Re: v6.16 RC test release now includes 802.11ac support

Wed Jul 09, 2014 1:34 pm

Do you support only the v2 cards (-AR4A ?) and not the v1 cards (-AR1A?), like many other AC implementations?
Linux/network engineer: ITIL, LPI1, CCNA R+S, CCNP R+S, JNCIA, JNCIS-SEC
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24272
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.16 RC test release now includes 802.11ac support

Wed Jul 09, 2014 1:39 pm

AR1A
no, we do not support v1 cards, only Peregrin v2
No answer to your question? How to write posts
 
Shiro
Frequent Visitor
Frequent Visitor
Posts: 65
Joined: Wed Sep 25, 2013 6:44 pm

Re: v6.16 RC test release now includes 802.11ac support

Wed Jul 09, 2014 2:20 pm

Hi,

i updated my RB493G (running as AP) from 6.15 and got a reboot loop. On the serial console i see no error, just repeating boot/login prompt and a reboot around 5-10 sec after the boot . No chance to get a supout :/

MikroTik 6.16rc17
mtr17 Login:

RouterBOOT booter 3.10

RouterBoard 493G

CPU frequency: 680 MHz
Memory size: 256 MiB
NAND size: 128 MiB
NAND partitions: 2

Press any key within 5 seconds to enter setup.

Update: ok was able to login fast enough and get this:

01:00:43 system,info,account user xxx logged in via local

[xxx@mtr17] /log>
echo: system,error,critical System rebooted because of kernel failure

It looks like a Ethernet issue, as soon as i plug in Ethernet, the kernel crashes after short moment after the auto Negotiation. Wireless connection is ok.

I was able to get the autosupout file and made a Ticket to MT, id is: Ticket#2014070966000634
Last edited by Shiro on Wed Jul 09, 2014 3:17 pm, edited 2 times in total.
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 2946
Joined: Tue Feb 25, 2014 12:49 pm
Location: Capalbio, Tuscany, Italy

Re: v6.16 RC test release now includes 802.11ac support

Wed Jul 09, 2014 3:09 pm

missing on changelog:

*) user-manager - now profile and limitation can be added / imported correctly for each owner;
I'm Italian, not English. Sorry for my imperfect grammar.
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6616
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: v6.16 RC test release now includes 802.11ac support

Wed Jul 09, 2014 4:24 pm

Shiro, thank you very much for very fast report.

Now there is updated 6.16rc version available from the same links, that has fix for RB4xx boards.
We will be happy to receive feedback on this version.
 
Shiro
Frequent Visitor
Frequent Visitor
Posts: 65
Joined: Wed Sep 25, 2013 6:44 pm

Re: v6.16 RC test release now includes 802.11ac support

Wed Jul 09, 2014 5:10 pm

Shiro, thank you very much for very fast report.

Now there is updated 6.16rc version available from the same links, that has fix for RB4xx boards.
We will be happy to receive feedback on this version.
Hi Sergejs,

i installed RC18 and the issue is gone.

Thanks for the fast update :)

Sven
 
User avatar
docmarius
Forum Guru
Forum Guru
Posts: 1219
Joined: Sat Nov 06, 2010 12:04 pm
Location: Timisoara, Romania
Contact:

Re: v6.16 RC test release now includes 802.11ac support

Wed Jul 09, 2014 5:29 pm

Looking stable and all working OK on first glance on PPC (RB1100AHx2).
Date/Time save feature works nicely. Tnx.
Torturing CCR1009-7G-1C-1S+, RB450G, RB750GL, RB951G-2HnD, RB960PGS, RB260GSP, OmniTIK 5HnD and NetMetal 922UAGS-5HPacD + R11e-5HnD in my home network.
 
Engitech
Trainer
Trainer
Posts: 64
Joined: Mon Feb 13, 2012 1:59 pm
Location: Geneva - Switzerland
Contact:

Re: v6.16 RC test release now includes 802.11ac support

Wed Jul 09, 2014 5:40 pm

Tested on RB912G-2HnD and 802.11ac QCA9880 mini-pcie card. Seems works well - 702 mbps udp between 2 of these.

Stable on bandwith test 1 hour.

Good job.
Capture1.PNG
You do not have the required permissions to view the files attached to this post.
 
User avatar
docmarius
Forum Guru
Forum Guru
Posts: 1219
Joined: Sat Nov 06, 2010 12:04 pm
Location: Timisoara, Romania
Contact:

Re: v6.16 RC test release now includes 802.11ac support

Wed Jul 09, 2014 6:07 pm

On CRS-125-24G-1S firmware 6.16rc18 kills the primary bootloader (3.17 - no message on the serial console, no access, nothing on the display, just the switch chip working and usr1 LED blinking fast).
It starts up correctly with the backup(3.08) and is working.

Reverted to 6.15 and still no boot with the primary. After rewriting the primary bootloader from 6.15 (3.16) everything is back to normal.
Last edited by docmarius on Wed Jul 09, 2014 6:26 pm, edited 3 times in total.
Torturing CCR1009-7G-1C-1S+, RB450G, RB750GL, RB951G-2HnD, RB960PGS, RB260GSP, OmniTIK 5HnD and NetMetal 922UAGS-5HPacD + R11e-5HnD in my home network.
 
User avatar
paoloaga
Member Candidate
Member Candidate
Posts: 222
Joined: Tue Mar 08, 2011 2:52 am
Location: Vaprio d'Agogna (NO) - Italy
Contact:

Re: v6.16 RC test release now includes 802.11ac support

Wed Jul 09, 2014 6:14 pm

I think that giving the opportunity to test the latest RC a few days before publishing a new release is a great idea! People can test the system on non critical devices...
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2293
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: v6.16 RC test release now includes 802.11ac support

Wed Jul 09, 2014 6:39 pm

:) Thanks for support 802.11ac :)
LAN, FTTx, Wireless. ISP operator
 
Shiro
Frequent Visitor
Frequent Visitor
Posts: 65
Joined: Wed Sep 25, 2013 6:44 pm

Re: v6.16 RC test release now includes 802.11ac support

Wed Jul 09, 2014 7:22 pm

I tested 6.16rc18 on following devices:

CCR-1009-8G-1S-1S+
RB493G
x86

So far no issues.

*) l2tp server: added option to enable IPsec automatically;

Tested this on CCR and x86:
At first, i expected that it forces the client to do ipsec for a successfull connection, but it looks like, it just creates a peer entry for l2tp/ipsec.

Sadly can't find any Minipci based card with QCA9880/9882 Chipset, only Minipci-e
 
Rowan
just joined
Posts: 20
Joined: Sat Dec 15, 2012 11:23 am

Re: v6.16 RC test release now includes 802.11ac support

Wed Jul 09, 2014 8:30 pm

Any idea where I can buy the QCA9880/9882 rev2?

What antennas are people using?

Many thanks

R
 
Lupin
Member Candidate
Member Candidate
Posts: 265
Joined: Mon Feb 16, 2009 10:22 pm
Location: Italy

Re: v6.16 RC test release now includes 802.11ac support

Thu Jul 10, 2014 12:10 am

Tested on RB912G-2HnD and 802.11ac QCA9880 mini-pcie card. Seems works well - 702 mbps udp between 2 of these.

Stable on bandwith test 1 hour.

Good job.
Can you share other informations?
Like: distance, signal, channel, modulation (256 qam??), ping, protocol..nv2 ?!!?
and some screenshots?
 
User avatar
111111
Member Candidate
Member Candidate
Posts: 194
Joined: Thu Oct 05, 2006 1:39 am
Location: BG,SOFIA

Re: v6.16 RC test release now includes 802.11ac support

Thu Jul 10, 2014 11:17 am

Isn't time to have demo3.mt.lv
with some new board as RB953GS-5HnT + 802.11AC card
with some continuous traffic

by the way is there will have antennas with 3 polarisations for 3 chain cards
for example mANT30 x3
In God We Trust. All other must submit X.509 certificate!
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6616
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: v6.16 RC test release now includes 802.11ac support

Thu Jul 10, 2014 11:28 am

111111, you are 100% correct. We are preparing new demo routers, instead of current ones with AC cards and links. Thank you very much for the interest.
 
User avatar
111111
Member Candidate
Member Candidate
Posts: 194
Joined: Thu Oct 05, 2006 1:39 am
Location: BG,SOFIA

Re: v6.16 RC test release now includes 802.11ac support

Thu Jul 10, 2014 12:22 pm

111111, you are 100% correct. We are preparing new demo routers, instead of current ones with AC cards and links. Thank you very much for the interest.
10x for understand maby all products must have sub-domains
ex RB953GS-5HnT.mt.lv
and connected each other by all possible scenarios
ex. MESH, bridge, BGP, OSPF, GSM network etc.
In God We Trust. All other must submit X.509 certificate!
 
User avatar
Kickoleg
Member Candidate
Member Candidate
Posts: 127
Joined: Tue Mar 11, 2014 3:13 pm
Location: Yverdon-les-Bains, Suisse

Re: v6.16 RC test release now includes 802.11ac support

Thu Jul 10, 2014 1:30 pm

Waiting for SXT - Sextant with AC support and BaseBox ...
MTCNA, MTCUME, MTCRE, MTCWE, MTCTCE certified
 
sgxluk
just joined
Posts: 6
Joined: Thu Jul 10, 2014 6:26 pm

Re: v6.16 RC test release now includes 802.11ac support

Thu Jul 10, 2014 11:56 pm

Does this release fix port flapping? Don't bother releasing it without
 
gjnardoni
just joined
Posts: 22
Joined: Sat Dec 11, 2010 5:20 am

Re: v6.16 RC test release now includes 802.11ac support

Fri Jul 11, 2014 6:14 am

Hello,
Is it able to test 802.11ac on SXT?, if so, how to?


Regards
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2293
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: v6.16 RC test release now includes 802.11ac support

Fri Jul 11, 2014 9:52 am

Hello,
Is it able to test 802.11ac on SXT?, if so, how to? Regards
And you have SXT ac?
LAN, FTTx, Wireless. ISP operator
 
djdrastic
Member
Member
Posts: 305
Joined: Wed Aug 01, 2012 2:14 pm

Re: v6.16 RC test release now includes 802.11ac support

Fri Jul 11, 2014 10:23 am

Tested on RB912G-2HnD and 802.11ac QCA9880 mini-pcie card. Seems works well - 702 mbps udp between 2 of these.

Stable on bandwith test 1 hour.

Good job.

Hi Engitech , would you mind sharing how many channels and what type of setup as well as wireless mode was being used ? Those results are very intriguing.
 
User avatar
111111
Member Candidate
Member Candidate
Posts: 194
Joined: Thu Oct 05, 2006 1:39 am
Location: BG,SOFIA

Re: v6.16 RC test release now includes 802.11ac support

Fri Jul 11, 2014 1:57 pm

When exactly will be on market RB911G-5HPacD aka BaseBox5
In God We Trust. All other must submit X.509 certificate!
 
gjnardoni
just joined
Posts: 22
Joined: Sat Dec 11, 2010 5:20 am

Re: v6.16 RC test release now includes 802.11ac support

Fri Jul 11, 2014 3:02 pm

Hello,
Is it able to test 802.11ac on SXT?, if so, how to? Regards
And you have SXT ac?
honzam, I really don't know, actually, if SXT is .ac compatible, that's why I'm asking for...

Could you please help how to identify its hardware, if it supports?
 
Engitech
Trainer
Trainer
Posts: 64
Joined: Mon Feb 13, 2012 1:59 pm
Location: Geneva - Switzerland
Contact:

Re: v6.16 RC test release now includes 802.11ac support

Fri Jul 11, 2014 3:25 pm

I will try to post more information this week-end - no time now. But the setup was very basic. I do it only to see if the card that i have were compatible with new drivers. 3 channels used, omni mikrotik pigtail antenna , on a desk about 1 meter of distance - wifi signal registration indicated 1333Mb/sec.
Last edited by Engitech on Fri Jul 11, 2014 3:26 pm, edited 1 time in total.
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2293
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: v6.16 RC test release now includes 802.11ac support

Fri Jul 11, 2014 3:25 pm

Hello,
Is it able to test 802.11ac on SXT?, if so, how to? Regards
And you have SXT ac?
honzam, I really don't know, actually, if SXT is .ac compatible, that's why I'm asking for...

Could you please help how to identify its hardware, if it supports?
You need SXTG-5HacD. The AC is in the name of product. Actualy is in NOT on market.
See PDF brochure: http://forum.mikrotik.com/viewtopic.php ... 54#p435757
LAN, FTTx, Wireless. ISP operator
 
djdrastic
Member
Member
Posts: 305
Joined: Wed Aug 01, 2012 2:14 pm

Re: v6.16 RC test release now includes 802.11ac support

Fri Jul 11, 2014 3:35 pm

I will try to post more information this week-end - no time now. But the setup was very basic. I do it only to see if the card that i have were compatible with new drivers. 3 channels used, omni mikrotik pigtail antenna , on a desk about 1 meter of distance - wifi signal registration indicated 1333Mb/sec.
Thanks
Much appreciated.
 
gjnardoni
just joined
Posts: 22
Joined: Sat Dec 11, 2010 5:20 am

Re: v6.16 RC test release now includes 802.11ac support

Fri Jul 11, 2014 4:29 pm

Thank you!.
 
Shiro
Frequent Visitor
Frequent Visitor
Posts: 65
Joined: Wed Sep 25, 2013 6:44 pm

Re: v6.16 RC test release now includes 802.11ac support

Fri Jul 11, 2014 6:10 pm

*) snmp - support AES encryption (rfc3826);

AES option is missing in Winbox but available on console.
 
User avatar
jose
Frequent Visitor
Frequent Visitor
Posts: 58
Joined: Thu Sep 22, 2005 4:56 am

Re: v6.16 RC test release now includes 802.11ac support

Fri Jul 11, 2014 11:01 pm

Engitech

Where did you got the ac cards?
What brand?

Thanks
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2293
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: v6.16 RC test release now includes 802.11ac support

Sat Jul 12, 2014 2:13 pm

LAN, FTTx, Wireless. ISP operator
 
shed
just joined
Posts: 23
Joined: Thu Mar 13, 2014 7:20 am
Location: Korea, Republic of
Contact:

Re: v6.16 RC test release now includes 802.11ac support

Sat Jul 12, 2014 4:55 pm

I can't find 802.11ac interface.

- D-Link DWA-182
- Intel 7260
- QCA9880-BR4A

What is the problem?
You do not have the required permissions to view the files attached to this post.
 
cdemers
Member Candidate
Member Candidate
Posts: 184
Joined: Sun Feb 26, 2006 3:32 pm
Location: Canada
Contact:

Re: v6.16 RC test release now includes 802.11ac support

Sat Jul 12, 2014 5:04 pm

Are you using the wireless-fp package and not the regular one?

Sent from my Nexus 5 using Tapatalk
 
shed
just joined
Posts: 23
Joined: Thu Mar 13, 2014 7:20 am
Location: Korea, Republic of
Contact:

Re: v6.16 RC test release now includes 802.11ac support

Sat Jul 12, 2014 5:25 pm

It was installed wireless-fp package.

How do it use Wireless-fp package?
 
npero
Member
Member
Posts: 316
Joined: Tue Mar 01, 2005 1:59 pm
Location: Serbia

Re: v6.16 RC test release now includes 802.11ac support

Sat Jul 12, 2014 6:33 pm

Go to System Package mark wireless-fp and click on button enable. After that must go to System Reboot and after reboot package is active.
It was installed wireless-fp package.

How do it use Wireless-fp package?
 
wispwest
Member
Member
Posts: 477
Joined: Tue May 19, 2009 3:48 am

Re: v6.16 RC test release now includes 802.11ac support

Sun Jul 13, 2014 12:37 am

can anyone post links to purchase the cards that are supported for 802.11ac?

also from the looks on google, this particular card is a mini-PCIe??? whey did they chose these smaller, lower power cards with non-MCX ports? Ughh.....
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2293
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: v6.16 RC test release now includes 802.11ac support

Sun Jul 13, 2014 9:47 am

all cards with: QCA9880/9882 rev2 (-BR4A)
for example http://www.compexshop.com/index.php/cPath/57_103
LAN, FTTx, Wireless. ISP operator
 
napismizpravu
Member Candidate
Member Candidate
Posts: 135
Joined: Sat Apr 09, 2011 1:27 pm
Location: czech

Re: v6.16 RC test release - samba error

Sun Jul 13, 2014 1:51 pm

*) smb - fixed usb share issues after reboot

sdílení funkční několik minut od restartu na RB433UAH (6.16rc18) a pak nedostupný...služba zkolabovala
share functional for several minutes and then restart unavailable ...services smb broken,collapsed (usb lost proxy Cache Drive) ... FTP > USBx functional
 
Ehman
Member
Member
Posts: 363
Joined: Mon Nov 15, 2010 10:49 pm

Re: v6.16 RC test release now includes 802.11ac support

Mon Jul 14, 2014 6:38 pm

3g dongle K3772-Z been added yet?
Last edited by Ehman on Mon Jul 14, 2014 6:56 pm, edited 1 time in total.
 
User avatar
jose
Frequent Visitor
Frequent Visitor
Posts: 58
Joined: Thu Sep 22, 2005 4:56 am

Re: v6.16 RC test release now includes 802.11ac support

Mon Jul 14, 2014 6:54 pm

When exactly will be on market RB911G-5HPacD aka BaseBox5
Yes, Would like to know too.

Thanks
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24272
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.16 RC test release now includes 802.11ac support

Tue Jul 15, 2014 9:07 am

When exactly will be on market RB911G-5HPacD aka BaseBox5
Yes, Would like to know too.

Thanks
Netbox 5 is already available to distributors, so should reach end users soon
No answer to your question? How to write posts
 
waldeir
just joined
Posts: 3
Joined: Tue Jul 15, 2014 9:45 pm

Re: v6.16 RC test release now includes 802.11ac support

Tue Jul 15, 2014 9:48 pm

RBSXTG-5HPACD LITE version also will be available?
 
lix5027
just joined
Posts: 8
Joined: Fri Jul 11, 2014 2:39 am

Re: v6.16 RC test release now includes 802.11ac support

Wed Jul 16, 2014 3:10 am

6.13, 14, 15,16rc
ccr 1032
userman always crash. I don't know why.

People can not login, the hotspot said "no user". Only I can do is just restart.

BTW,

Looking forward to have ovpn with IPV6 tunnel in the new version. (ipv4 is not stable, v6 llink is much better then v4) :)
 
presianbg
just joined
Posts: 7
Joined: Mon Jun 02, 2014 7:38 am

Re: v6.16 RC test release now includes 802.11ac support

Wed Jul 16, 2014 5:58 pm

Hi,

I updated my RB2011UiAS-2HnD-IN with routeros-mipsbe-6.16rc18.npk and found 1 problem. When i reboot the router hangs and LCD display is blank (white). Solution is to hardware reset, then it's ok ? Any ideas?


10x in advance.

Best Regards,
Pressian
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 2946
Joined: Tue Feb 25, 2014 12:49 pm
Location: Capalbio, Tuscany, Italy

Re: v6.16 RC test release now includes 802.11ac support

Wed Jul 16, 2014 6:19 pm

Hi,

I updated my RB2011UiAS-2HnD-IN with routeros-mipsbe-6.16rc18.npk and found 1 problem. When i reboot the router hangs and LCD display is blank (white). Solution is to hardware reset, then it's ok ? Any ideas?


10x in advance.

Best Regards,
Pressian
Have exact model on office and at house, no problem.

EXACT method used for update/upgrade?
I'm Italian, not English. Sorry for my imperfect grammar.
 
presianbg
just joined
Posts: 7
Joined: Mon Jun 02, 2014 7:38 am

Re: v6.16 RC test release now includes 802.11ac support

Wed Jul 16, 2014 7:42 pm

Hi,

I updated my RB2011UiAS-2HnD-IN with routeros-mipsbe-6.16rc18.npk and found 1 problem. When i reboot the router hangs and LCD display is blank (white). Solution is to hardware reset, then it's ok ? Any ideas?


10x in advance.

Best Regards,
Pressian
Have exact model on office and at house, no problem.

EXACT method used for update/upgrade?

Yep, via WinBox -> System -> Packages -> drag and drop .npk file -> reboot.

EDIT: Tried to upgrade it again with routeros-mipsbe-6.16.npk and problem is gone. :)
 
rwaters
just joined
Posts: 19
Joined: Sat Jan 28, 2012 5:56 pm
Location: USA

Re: v6.16 RC test release now includes 802.11ac support

Thu Jul 17, 2014 4:19 am

RB912UAG-2HPnD using Compex WLE900VX advertised as Atheros QCA9880 v2. I do get wlan2 and can connect to it but rx rate limited to 6Mb and not supported to change tx power to "card rates". btest client shows tx at 5Mb and rx getting just over 200Mb udp throughput going from laptop through rb912 to ccr1009.

from terminal the information from "interface wireless print":

1 R name="wlan2" mtu=1500 mac-address="redacted" arp=enabled
interface-type=Atheros AR9888 mode=ap-bridge ssid="redacted"
frequency=auto band=5ghz-onlyac channel-width=20/40/80mhz-eCee
scan-list=default wireless-protocol=any vlan-mode=no-tag vlan-id=1
wds-mode=disabled wds-default-bridge=none wds-ignore-ssid=no
bridge-mode=enabled default-authentication=yes default-forwarding=yes
default-ap-tx-limit=0 default-client-tx-limit=0 hide-ssid=no
security-profile=default compression=no

could be this card not fully supported but I share my experience so far

Keep up the good work!
 
Shiro
Frequent Visitor
Frequent Visitor
Posts: 65
Joined: Wed Sep 25, 2013 6:44 pm

Re: v6.16 RC test release now includes 802.11ac support

Thu Jul 17, 2014 1:17 pm

*) snmp - support AES encryption (rfc3826);

the (final?) 6.16 on the servers still missing the AES Encryption option in Winbox and WebUI.
 
andriys
Forum Guru
Forum Guru
Posts: 1187
Joined: Thu Nov 24, 2011 1:59 pm
Location: Kharkiv, Ukraine

Re: v6.16 RC test release now includes 802.11ac support

Thu Jul 17, 2014 2:31 pm

*) snmp - support AES encryption (rfc3826);

the (final?) 6.16 on the servers still missing the AES Encryption option in Winbox and WebUI.
I'd say it is normal/expected. In the previous 6.x releases lots of new features were added as CLI-only first, with GUI support being added several releases after.
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6283
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Re: v6.16 RC test release now includes 802.11ac support

Thu Jul 17, 2014 3:11 pm

*) snmp - support AES encryption (rfc3826);

the (final?) 6.16 on the servers still missing the AES Encryption option in Winbox and WebUI.
I'd say it is normal/expected. In the previous 6.x releases lots of new features were added as CLI-only first, with GUI support being added several releases after.
you will be able to select AES as an option using winbox when 6.16 is released.
 
visalink
Frequent Visitor
Frequent Visitor
Posts: 69
Joined: Thu Oct 03, 2013 1:42 am

Re: v6.16 RC test release now includes 802.11ac support

Thu Jul 17, 2014 6:06 pm

*) snmp - support AES encryption (rfc3826);

the (final?) 6.16 on the servers still missing the AES Encryption option in Winbox and WebUI.
I'd say it is normal/expected. In the previous 6.x releases lots of new features were added as CLI-only first, with GUI support being added several releases after.
The last 6.16 fix this.
 
User avatar
tomaskir
Trainer
Trainer
Posts: 1122
Joined: Sat Sep 24, 2011 2:32 pm
Location: Slovakia

Re: v6.16 RC test release now includes 802.11ac support

Fri Jul 18, 2014 3:20 pm

Since v6.16 has now been released, this topic should probably not be a sticky announcement anymore ;)
Unimus - configuration management, automation and backup solution
Mass Config Push, network-wide RouterOS upgrades, and more!

Who is online

Users browsing this forum: No registered users and 42 guests