I am sorry to rebounce this post again but I have the same problem.
Our ISP is delivering 300 / 300 MBit but the real output is current 300 MBit download / 4 MBit upload.
The net is shared between other companies but doing the test around the Mikrotik router shows full bandwith of 300 / 300 MBit. So I assume the problem must be in our RB750GR2. Could someone please take a look at my current router configuration and see if they can spot an issue within it?
Thanks in advance.
# apr/06/2018 16:52:21 by RouterOS 6.41.3
# software id = 79NE-WWU7
#
# model = RouterBOARD 750G r2
# serial number = 64FB0618613C
/interface bridge
add admin-mac=AA:AA:AA:AA:AA:AA arp=proxy-arp auto-mac=no comment=\
"created from master port" name=bridge1 protocol-mode=none
/interface ethernet
set [ find default-name=ether2 ] arp=proxy-arp name=ether2-master speed=1Gbps
/interface list
add exclude=dynamic name=discover
add name=mactel
add name=mac-winbox
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip hotspot profile
set [ find default=yes ] html-directory=flash/hotspot
/ip pool
add name=default-dhcp ranges=192.168.88.10-192.168.88.254
add name=sstp-dhcp ranges=10.0.2.1-10.0.2.10
/ip dhcp-server
add address-pool=default-dhcp authoritative=after-2sec-delay interface=bridge1 \
name=defconf
/ppp profile
add local-address=sstp-dhcp name=sstp-profile remote-address=sstp-dhcp \
use-encryption=required
/snmp community
set [ find default=yes ] addresses=0.0.0.0/0
/interface bridge port
add bridge=bridge1 interface=ether4
add bridge=bridge1 interface=ether5
add bridge=bridge1 interface=ether2-master
/ip neighbor discovery-settings
set discover-interface-list=discover
/interface list member
add interface=bridge1 list=discover
add interface=ether3 list=discover
add interface=ether4 list=discover
add interface=ether5 list=discover
add interface=bridge1 list=mactel
add interface=bridge1 list=mac-winbox
/interface sstp-server server
set authentication=mschap2 certificate=ca.crt_0 default-profile=sstp-profile \
enabled=yes force-aes=yes pfs=yes
/ip address
add address=192.168.88.1/24 comment=defconf disabled=yes interface=bridge1 \
network=192.168.88.0
add address=10.0.0.1/24 interface=bridge1 network=10.0.0.0
add address=xxx.xxx.xxx.43/29 interface=ether1 network=xxx.xxx.xxx.40
add address=xxx.xxx.xxx.44/29 interface=ether1 network=xxx.xxx.xxx.40
add address=172.16.1.1 interface=ether3 network=255.255.255.0
/ip dhcp-client
add comment=defconf dhcp-options=hostname,clientid disabled=no interface=ether1
/ip dhcp-server network
add address=192.168.88.0/24 comment=defconf gateway=192.168.88.1
/ip dns
set allow-remote-requests=yes servers=8.8.8.8
/ip dns static
add address=192.168.88.1 name=router
/ip firewall filter
add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
add action=accept chain=input comment="defconf: accept established,related" \
connection-state=established,related
add action=accept chain=input dst-address=xxx.xxx.xxx.44 dst-port=443 protocol=\
tcp
add action=drop chain=input comment="defconf: drop all from WAN" in-interface=\
ether1
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \
connection-state=established,related
add action=accept chain=forward comment="defconf: accept established,related" \
connection-state=established,related
add action=drop chain=forward comment="defconf: drop invalid" connection-state=\
invalid
add action=drop chain=forward comment=\
"defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \
connection-state=new in-interface=ether1
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" out-interface=\
ether1
add action=dst-nat chain=dstnat comment=\
"Public IP xxx.xxx.xxx.43 HTTPS" dst-address=xxx.xxx.xxx.43 \
dst-port=443 protocol=tcp to-addresses=10.0.0.253 to-ports=443
add action=masquerade chain=srcnat dst-address=10.0.0.253 dst-port=443 \
out-interface=bridge1 protocol=tcp src-address=10.0.0.0/24
add action=dst-nat chain=dstnat comment=\
"Public IP xxx.xxx.xxx.43 HTTP" dst-address=xxx.xxx.xxx.43 \
dst-port=80 protocol=tcp to-addresses=10.0.0.253 to-ports=80
add action=masquerade chain=srcnat dst-address=10.0.0.253 dst-port=80 \
out-interface=bridge1 protocol=tcp src-address=10.0.0.0/24
add action=dst-nat chain=dstnat comment=\
"Public IP xxx.xxx.xxx.43 HTTP 20080" dst-address=\
xxx.xxx.xxx.43 dst-port=20080 protocol=tcp to-addresses=10.0.0.206 \
to-ports=20080
add action=masquerade chain=srcnat dst-address=10.0.0.206 dst-port=20080 \
out-interface=bridge1 protocol=tcp src-address=10.0.0.0/24
/ip route
add distance=1 gateway=xxx.xxx.xxx.41
/ip service
set ftp disabled=yes
set www port=20081
set ssh disabled=yes
/ip smb shares
set [ find default=yes ] directory=/pub
/ppp secret
add name=John password=xyz1 profile=sstp-profile service=sstp
add name=Peter password=xyz2 profile=sstp-profile service=sstp
add name=Ellis password=xyz3 profile=sstp-profile service=sstp
add name=Porter password=xyz4 profile=sstp-profile service=sstp
add name=Tora password=xyz5 profile=sstp-profile service=sstp
/system clock
set time-zone-name=Europe/Copenhagen
/tool mac-server
set allowed-interface-list=mactel
/tool mac-server mac-winbox
set allowed-interface-list=mac-winbox
