Community discussions

 
jmginer
Member Candidate
Member Candidate
Topic Author
Posts: 115
Joined: Tue Dec 11, 2012 4:56 am

Limit incoming UDP bw

Wed Jul 23, 2014 3:04 pm

Hello, how to block incoming UDP traffic to limit 10Mbps per destination IP.
Thanks!
 
CelticComms
Forum Guru
Forum Guru
Posts: 1766
Joined: Wed May 02, 2012 5:48 am

Re: Limit incoming UDP bw

Fri Jul 25, 2014 3:07 pm

With many sources there is no easy way of limiting the stream rate before it arrives at you. Of course you can then drop as much of it as you like. Some intelligent clients will adjust the rate being sent to them if they detect traffic being dropped but the details are implementation specific.
Interlynx | Networking and Information Security Consultants & Trainers | Email: routerlynx@gmail.com
BGP | EIGRP | OSPF | MPLS | Firewall | VPN | IPsec | Multicast | QOS | IPv4/6 | STP | VLAN | PON | AE | M2M | and more!

 
jmginer
Member Candidate
Member Candidate
Topic Author
Posts: 115
Joined: Tue Dec 11, 2012 4:56 am

Re: Limit incoming UDP bw

Tue Sep 16, 2014 5:37 pm

limiting the stream rate before it arrives at you.
But I'm interested to limit per destination, not per source.
Is not possible?
 
CelticComms
Forum Guru
Forum Guru
Posts: 1766
Joined: Wed May 02, 2012 5:48 am

Re: Limit incoming UDP bw

Tue Sep 16, 2014 8:12 pm

You can limit what you forward / pass on, but you can't easily limit what arrives at your ingress point without some kind of feedback mechanism or the assistance of your upstream providers.
Interlynx | Networking and Information Security Consultants & Trainers | Email: routerlynx@gmail.com
BGP | EIGRP | OSPF | MPLS | Firewall | VPN | IPsec | Multicast | QOS | IPv4/6 | STP | VLAN | PON | AE | M2M | and more!

Who is online

Users browsing this forum: No registered users and 38 guests