Page 1 of 1

IP-Scan Not Running

Posted: Tue Sep 16, 2014 5:02 pm
by SoundGuyFYI
Has anyone had issues with the IP-Scan tool not running. I have tried running the tool in both winbox and CLI. Neither work.

Any ideas? I figure a reboot will fix it but I can't really reboot the router for something as small as the IP scan not working.

I have used the tool before, often in fact.

Here is the error message I get when trying to run the IP-Scan in CLI:
[****@AwesomeCCR] > tool ip-scan address-range=192.168.***.0/24 interface=ether7
action timed out - try again, if error continues contact MikroTik support and send a supout file (13)
[****@AwesomeCCR] >

Re: IP-Scan Not Running

Posted: Wed Sep 17, 2014 12:15 am
by NAB
I suggest you contact MikroTik support and send a supout file.