Client radio’s connection “stalls”.
Client radio will not transmit data, only displays one side of tx/rx signal in wireless registration on AP.
I believe I have witnessed this on radios as early as 6.11, and as late as 6.18, however, is very common on 6.12 and 6.15
How to reproduce:
This is not an issue I have can reproduce, happens intermittently. I believe I typically see this on 802.11, and can’t confirm that I have witnessed it on nstreme or NV2 enabled towers.
Can re-establish connection by simply booting the client radio out, and when it associates again, connection will be restored, and tx/rx signals both display properly in AP registration.