We have several 450g, that receive one WAN an then have four segments of our own LANS, right now we are bridging, but it takes resources and two of the segments have servers and we are not knowing who is accessing.
interface 1 WAN
interface 2 LAN
interface 3 LAN
interface 4 server
interface 5 server
we want to for lan 2 and 3 to view everything and for 4 and 5 to receive the internet ip's an not the 450g address
We were thinking routing, but we are new at it!
Can any one help us?
Re: simple interface routing
Sorry but I can't understand what you are doing right now.
Can you put the adresses of the servers and the subnets. And an alias or whatever of the public addresses.
You don't need to use bridging to put the interfaces together. RG450G has a switch chip inside.
Can you put the adresses of the servers and the subnets. And an alias or whatever of the public addresses.
You don't need to use bridging to put the interfaces together. RG450G has a switch chip inside.
Re: simple interface routing
We have one bridge over all interfaces, except the WAN one
Re: simple interface routing
Use the master port, it shares the traffic with its slave ports without using bridges.
Code: Select all
/interface ethernet
set [ find default-name=ether1 ] name=ether1-master-local
set [ find default-name=ether2 ] master-port=ether1-master-local
set [ find default-name=ether3 ] master-port=ether1-master-local
set [ find default-name=ether4 ] master-port=ether1-master-local
set [ find default-name=ether5 ] mac-address=00:18:39:25:8B:71 name=ether5-gateway
We have one bridge over all interfaces, except the WAN one
Who is online
Users browsing this forum: Bing [Bot], Google [Bot], hazem, sas2k, sch, vesuviustreamline, vingjfg, washdogg87 and 209 guests