I recieved a new mAP2n today which we connected and for most of the day with no issues, brought the unit home and connected it up using the PSU from my 951-2n and the unit worked for about 15min before becoming unresonsive.
I rebooted the device with and on boot all LED remain illuminated but blink every 30 odd seconds. I then reinstalled ROS 5.26 but the issues remained. Decided to try 6.22 as a last reosrt and now I have only the power LED on after boot.
Anyone experience this? I am going back to 5.26 now to see if that have any affect but I doubt it.