I have recently purchased a ZTE MF667 USB 3G modem for use with a RB951Ui-2HnD. Unfortunately, i am finding that while it seems the modem is supported, the USB port is not being given a port asignment
When I run /system resource usb print this is the output:
When I run /port print this is the output:
From this I am concluding that the modem is being recognized by the RB but that is all.
In System->Resources->USB I can see, again, that the modem is recognized, but that is all. When I look at anything dealing with PPP or LTE, under ports it simply written “unknown”.
I have tried every combination of power cycling/USB modem plug and unplug…nothing
I have used Putty and AT commands to turn off the virtual CD-ROM as was suggested in one post.
I have also inserted a USB flash drive into the port and it was successfully recognized.
I have also use the modem in my computer without an issue.
Any advice would be very appreciated.