Community discussions

MikroTik App
 
c02
just joined
Topic Author
Posts: 5
Joined: Tue Jan 13, 2015 8:19 pm
Location: Austria
Contact:

Huawei ME909U-521 serial/ppp

Thu Jan 15, 2015 11:25 am

hello,

introduction:
we are using several routerboards with mini pcie slots with huawei me909u-521, firmware (11.234.77.00.00)
the interface is enabled under ressources and would be recognized as usb.

at the moment we test with the RB953GS-5HnT ... with 6.24
the interface works fine in different setups. f.e. - dhcp client

problem:

we want to use the lte interface as a ppp-client - problem is that the interface is not available under /ports - there is only the serial console interface.

how to bring the lte interface into the serial ports ?


thx a lot
florian
 
RogerWilco
Member
Member
Posts: 384
Joined: Wed Feb 16, 2011 6:02 am
Location: Australia

Re: Huawei ME909U-521 serial/ppp

Fri Jan 16, 2015 12:59 am

You need to disable Direct-IP drivers if it is showing up as an LTE device.
System->Ports->Firmware.
 
c02
just joined
Topic Author
Posts: 5
Joined: Tue Jan 13, 2015 8:19 pm
Location: Austria
Contact:

Re: Huawei ME909U-521 serial/ppp

Fri Jan 16, 2015 12:18 pm

You need to disable Direct-IP drivers if it is showing up as an LTE device.
System->Ports->Firmware.
works fine ! ppp connection works also - big thx !

# are there any known modem/dial strings to optimize lte connections ? we use standard ATDT now.

# is there any possibility to remote check the interface / radio quality - because info tells me not possible if ppp interface is up.


thx
florian

Who is online

Users browsing this forum: msatter and 66 guests