Community discussions

MikroTik App
 
User avatar
azurtem
Trainer
Trainer
Topic Author
Posts: 217
Joined: Mon May 16, 2011 5:35 pm
Location: Nice, France
Contact:

Netinstall

Mon Jan 19, 2015 6:58 pm

Hi

I have been struggling for the past two hours trying to get netinstall to talk to my CCR-1009
Following a power cut the router won't boot ("loading kernel from nand")

...same issue as : http://forum.mikrotik.com/viewtopic.php?f=3&t=87811

I have set up the CCR-1009 with boot to Ethernet
I activated the Boot server in Netinstall and entered an ip address within the same subnet
I keep getting "Please, check ethernet cable..."

I have tried a direct link, intermediate switch...nothing works
I have even attempted to use DHCP protocol - the router however doesn't attempt to reach the DHCP server

I tested the same setup with an RB433 and it works perfectly

Any ideas ?

thanks
yann
 
User avatar
bajodel
Long time Member
Long time Member
Posts: 545
Joined: Sun Nov 24, 2013 8:30 am
Location: Italy

Re: Netinstall

Mon Jan 19, 2015 8:02 pm

Hi

I have been struggling for the past two hours trying to get netinstall to talk to my CCR-1009
Following a power cut the router won't boot ("loading kernel from nand . ...
double check wich is the correct "boot port" on the CCR and use that ..
 
User avatar
azurtem
Trainer
Trainer
Topic Author
Posts: 217
Joined: Mon May 16, 2011 5:35 pm
Location: Nice, France
Contact:

Re: Netinstall

Mon Jan 19, 2015 8:19 pm

Thanks Bajodel

Silly me, I assumed it was port eth1
There is even the indication 'boot' above port n°8 !

thanks
yann

Who is online

Users browsing this forum: Bing [Bot], Google [Bot], matthewkirby and 101 guests