Hi,

I have a strange problem which I need some help or guidance.

If I connect a user via PPPoE and run a speedtest, we get 50Mbps download and 9Mbps upload.

If I connect the user directly to the mikrotik without PPPoe (i.e. assign the IP direct), I get a 50Mbps download & 50Mbps upload.

What would cause this issue with PPPoE?

Any help would be appreciated.

James

Make sure queues are not configured on your router, that limits traffic of PPPoE client. Login to your router and check queues configuration.

Some problem with CCR1009, slow upload speed.
how you resolv this trabl?

Some problem with CCR1009, slow upload speed.
how you resolv this trabl?

Have a progress, put gigabit interface(wan1 through optic converter) in 100MB/full mode, and upload speed up to near 87Mb/s. I'am connect to router through second wan, and after pppoe client start connect, ccr-1009 slow down all connection on wan2 ? Like a packets lost occur, whiteout high cpu load or any errors on interface. When stop brakes/lost on router we see normal upload!! Problem with pppoe client? Ppp Chiper?


Have a good day!

In PPPoE connection on client MT disable MRRU. I've had the same problem and this resolved it.

In PPPoE connection on client MT disable MRRU. I've had the same problem and this resolved it.

Same Problem at me also.. and same solution.

Hi! Try set interface queue to multiqueue on CCR device.


Have a good day!

Pppoe Provider switch-100mb/s<-->cooper<-->converter-1gb/s<-->fiber<-->converter-1gb/s<-->cooper<-->ccr1009-1gb/s. When provider reconnect my to 1gb/s port on his switch, then full bandwidth on channel appears!!!


Sent from my iPhone using Tapatalk

In PPPoE connection on client MT disable MRRU. I've had the same problem and this resolved it.

This solved my issue in 11/22/2017..

Thanks !!

Hi All,

Is there any update for this issue ? its been 6 years and still this issue exists.

Hi

I am also facing same issue, Download is fine but upload is not going up to mark on pppoe user

From where need to disable MRRU, Can anybody help?

I can't find the mru and how to disable please help me

I can't find the mru and how to disable please help me

Helow my friend do you fix your problem do you find your solution to disable the MRU

In PPPoE connection on client MT disable MRRU. I've had the same problem and this resolved it.

This solved my issue in 11/22/2017..

Thanks !!

MY FRIEND please help me