ADSL Modem with normal home use, so including NAT and firewall.
IP address inside 192.168.12.1/24
3 nat rules
incoming ports 10022, 10080 and 18291 are forwarded to 192.168.12.2, no change of ports.
Connected Mikrotik with ether1, with IP address 192.168.12.2/24
Second IP address of MikroTik is 192.168.2.1/24
Mikrotik has no Firewall filter rules but does have several NAT rules
Mikrotik has 4 NAT rules (3 x dstnat and 1 masquerading srcnat)
Code: Select all
/ip firewall nat
add action=dst-nat chain=dstnat comment="Forward tcp:10022 to tcp:22" dst-port=10022 in-interface=ether1 protocol=tcp to-addresses=192.168.2.1 to-ports=22
add action=dst-nat chain=dstnat comment="Forward tcp:10080 to tcp:80" dst-port=10080 in-interface=ether1 protocol=tcp to-addresses=192.168.2.1 to-ports=80
add action=dst-nat chain=dstnat comment="Forward tcp:18291 to tcp:8291" dst-port=18291 in-interface=ether1 protocol=tcp to-addresses=192.168.2.1 to-ports=8291
When I try to open the webpage of the MikroTik I get a message telling "Connection has reset" and I can't get any clue why this is happening.
I have investigated the NAT and input/output chains and all seems normal.
Anybody having some advice here?