Working at turbo mode(5G/ABP)

alex779 · Fri Jun 04, 2004 5:45 pm

I set band 5GHz-turbo.
Will i see (interface wireless monitor) rx and tx 108 Mbit?
Or rx tx - 54 Mbit, but radiochannel will work faster then in band 5GHz?

tully · Sat Jun 05, 2004 7:55 am

Yes, if you have it set to turbo, it is going two times faster.

alex779 · Sun Jun 06, 2004 11:33 pm

I know it.
But what shall i see on the screen?
Shall i see 54 or 108 on the screen (command -> interface wireless monitor ) - it's my question...

tully · Mon Jun 07, 2004 1:54 pm

You will see in the configuration that you have turbo set.

John

alex779 · Mon Jun 07, 2004 2:32 pm

status: connected-to-ess
band: 5GHz-turbo
frequency: 5290
tx-rate: 54Mbps
rx-rate: 54Mbps
ssid: qvlink
bssid: 00:01:24:70:48:D4
signal-strength: -72
current-ack-timeout: 33
current-distance: 33

I don't understand. Sorry.
My question about indicated digits - can they be 108 ? Or this utilite does not indicate digits higher then 54 ?

mp3turbo2 · Tue Jun 08, 2004 9:07 am

alex,

you have there 5ghz-turbo.... rated speed is 54mbps. Thus, because you are using 2 channels {bonded}, you have 2x 54Mbps... you don't see 108 there? Just a cosmetic issue...

alex779 · Tue Jun 08, 2004 10:43 am

Not think so...
With band 5GHz whithout turbo i have also 54 MBit rx tx.
This value only indicate possible speed on rx OR tx NOT SUMM - this not indicate real trasfer rate in time. IMHO.
I have real transfer rate 2.4 Mbyte/sec ~ 54 Mbit/sec (half duplex) on both band. Is developer here?
Can i get the answer for my quistion?

Tue Jun 08, 2004 11:14 am

as said before, the displayed number will be 54, but the actual speed will be higher.

Working at turbo mode(5G/ABP)

Working at turbo mode(5G/ABP)

Who is online