Community discussions

 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24263
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Newsletter 91

Mon Sep 23, 2019 11:42 am

In this MikroTik newsletter:

• Audience
• LoRa is ready
• MQS
• GPeR outdoor case
• MikroTik Olympians
• “Wake up, Neo...”
• CCR revisions
• Upcoming MUM

Download the newsletter here:
https://mt.lv/news91
No answer to your question? How to write posts
 
andriys
Forum Guru
Forum Guru
Posts: 1187
Joined: Thu Nov 24, 2011 1:59 pm
Location: Kharkiv, Ukraine

Re: Newsletter 91

Mon Sep 23, 2019 12:14 pm

MQS looks interesting. Newsletter says the following:
  • Power it with a USB power bank and it will power your CPE over PoE, while you configure it

The question is, when MQS is power with a USB power bank only, what voltage can be expected on PoE output?
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24263
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Newsletter 91

Mon Sep 23, 2019 12:20 pm

From the product page
https://mikrotik.com/product/mqs
Passive PoE, 12 V 400 mA (when USB 5 V input is used)
No answer to your question? How to write posts
 
User avatar
rushlife
Frequent Visitor
Frequent Visitor
Posts: 99
Joined: Thu Nov 05, 2015 12:30 pm
Location: czech republic

Re: Newsletter 91

Mon Sep 23, 2019 5:13 pm

Really ?
Still no CRS354 switches ?
Really ?!?!
 
upower3
Member
Member
Posts: 384
Joined: Thu May 07, 2015 11:46 am

Re: Newsletter 91

Tue Sep 24, 2019 11:39 am

I expected to see more in thenewsletter. At least a couple of words for ROS 7, and maybe some new useful devices.

Two PSU is a good news, really. While PoE in is something that was there for years, RB with 2 PSU appears at least like "pro" equipment :)

Audience... Expensive toy, with questionable wifi coverage, so it is not only design that'll push users to get one. I'd love to read "howto" article on how to set up such a device(es) across generic building to archive good wifi, and comparison to (say) Unifi devices. Wifi is not something that should be placed openly and visibly so there should be something really useful but look in it.
 
marekm
Member Candidate
Member Candidate
Posts: 207
Joined: Tue Feb 01, 2011 11:27 pm

Re: Newsletter 91

Tue Sep 24, 2019 12:55 pm

Still no CRS318-1Fi-15Fr-2S switches (outdoor, reverse PoE)?
 
pe1chl
Forum Guru
Forum Guru
Posts: 5916
Joined: Mon Jun 08, 2015 12:09 pm

Re: Newsletter 91

Tue Sep 24, 2019 2:11 pm

Will there also be a R11e-LoRa4 ?
Or is that market not large enough to be interesting...
 
User avatar
NetVicious
Member Candidate
Member Candidate
Posts: 109
Joined: Fri Nov 13, 2009 3:30 pm
Location: Spain

Re: Newsletter 91

Wed Sep 25, 2019 11:53 am

Nice one.

What about one MQS with one ethernet port for POE IN and another ethernet port for POE OUT. The new ethernet port will be only used to get power from the current wire, and also can be good for do not have the device down so much time while configuring it.

It will be easier to disconect the Mikrotik device ethernet cable, connect it to the MQS2 (new device name) and add another ethernet cable from the MQS2 to the Mikrotik device. We won't need the the USB Power Bank, and we get rid about problems of out of battery on the Power Bank.

Regards,
. . //\/ e t . \/ i c i o u s ..
 
RogerWilco
Member
Member
Posts: 338
Joined: Wed Feb 16, 2011 6:02 am
Location: Australia

Re: Newsletter 91

Thu Sep 26, 2019 2:46 am

Nice one.

What about one MQS with one ethernet port for POE IN and another ethernet port for POE OUT. The new ethernet port will be only used to get power from the current wire, and also can be good for do not have the device down so much time while configuring it.

It will be easier to disconect the Mikrotik device ethernet cable, connect it to the MQS2 (new device name) and add another ethernet cable from the MQS2 to the Mikrotik device. We won't need the the USB Power Bank, and we get rid about problems of out of battery on the Power Bank.

Regards,
I had the same idea. Would be very handy for sites already with power. No need to have 12V to 5V converter or carry an USB power pack.
 
jebz
Member Candidate
Member Candidate
Posts: 239
Joined: Sun May 01, 2011 12:03 pm
Location: Australia

Re: Newsletter 91

Thu Sep 26, 2019 7:21 am

What about one MQS with one ethernet port for POE IN and another ethernet port for POE OUT. The new ethernet port will be only used to get power from the current wire, and also can be good for do not have the device down so much time while configuring it.
.
It's already available, the RBmAP2nD has POE in and POE out.
 
radenli
just joined
Posts: 14
Joined: Tue Apr 04, 2017 10:45 am

Re: Newsletter 91

Tue Oct 01, 2019 2:22 am

So excited to see a tri-band AP finally is available
Will Mikrotik have a tri-band cAP or wAP later?
 
Luminair
just joined
Posts: 5
Joined: Sat Jul 07, 2018 12:54 pm

Re: Newsletter 91

Sun Oct 06, 2019 6:15 pm

I want to congratulate everyone for getting to v7, and thank you for your work!
 
User avatar
raystream
newbie
Posts: 49
Joined: Tue Mar 20, 2018 6:56 pm
Location: Germany

Re: Newsletter 91

Mon Oct 07, 2019 9:50 am

When wilkl the lora package be available for the mmips based devices like ltap or RBM33G?
These would be the perfect devices with the lora and an lte card
 
User avatar
PUDIS
just joined
Posts: 3
Joined: Fri Oct 25, 2019 8:35 am

Re: Newsletter 91

Fri Oct 25, 2019 11:39 am

Yes!
What about: CRS354-48G-4S+2Q+ ?
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24263
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Newsletter 91

Fri Oct 25, 2019 11:45 am

Still coming later this year.
No answer to your question? How to write posts
 
matedeni
just joined
Posts: 1
Joined: Wed Nov 06, 2019 3:44 pm

Re: Newsletter 91

Wed Nov 06, 2019 3:50 pm

When will newsletter 92 appear? Newsletter 85 was released last year on this day. :)
I look forward to new products. (CRS354-48G-4S+2Q+)
 
ITDave
just joined
Posts: 6
Joined: Sat Sep 09, 2017 11:37 am

Re: Newsletter 91

Sat Nov 09, 2019 4:12 am

Any updates coming soon to the CCR range??

Who is online

Users browsing this forum: No registered users and 14 guests