Community discussions

 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

v6.33.5 [current] is released!

Wed Jan 13, 2016 12:44 pm

We have released 6.33.5 version. Version includes only bug fixes compared with 6.33.3 and does not include new features. If you need new features, then test 6.34rc versions.
Version is released in current channel.

What's new in 6.33.5 (2015-Dec-28 09:13):

*) mipsle - architecture support dropped (last fully supported version 6.32.3);
*) wireless - regular “wireless” package is now retired and replaced by "wireless-fp" and "wireless-cm2";
*) arp - show incomplete ARP entries;
*) btest - fix potential crash after btest release;
*) btest - improve UDP tx rate precision;
*) crypto - fixed kernel failure in talitos HW encryption;
*) dhcpv6-client - fix DNS address assignement;
*) dhcpv6-client - set correct parameters when rapid commit is used
*) e-mail - do not reset server address after changing configuration;
*) fastpath - fixed possible kernel failure on multi core systems;
*) fetch - added 30 second connection time-out;
*) hotspot - added missing favicon.ico in hotspot html pages;
*) kernel - general improvement for core process scheduling;
*) led - add WLAN led to RB951Ui
*) log - log link up/down events only when link actually has changed its state;
*) lte - improve support Sierra Wireless 320U;
*) lte - speed up first time connection to LTE network on SXT LTE;
*) net - apply slave config only if master config has been changed;
*) net - do not show L2MTU in VLAN compact export;
*) netwatch - make work with ping time-out more precise;
*) ppp - make PPP active print radius & !radius conditions work;
*) romon - do not accept multicast id;
*) romon - fixed crash on RoMON if fast-path was active;
*) smb - show correct interface name in SMB debug logs;
*) ssh - fix session clean-up;
*) sshd - resolved shared secret mismatch issue;
*) tile - fixed kernel failure on HW encryption;
*) webfig - didn't show zero values in CRS ingress/egress VLAN translation rules;
*) winbox - added + & - to IGMP proxy MFC;
*) winbox - added LCD menu for RB3011;
*) winbox - allow to specify traffic-monitor threshold in k & M units + specify that those are bits;
*) winbox - show fast-path per interface counters.

Version 6.33.4 was not released publicly because it was built only for factory.
 
nik247
Frequent Visitor
Frequent Visitor
Posts: 61
Joined: Fri Jan 16, 2009 1:00 pm
Location: Ukraine, Kyiv

Re: v6.33.5 [current] is released!

Wed Jan 13, 2016 1:27 pm

In v6.33.5 present bugs (found in 6.33.3 two days ago) with capsman and radius:

1) on Radius-Stop packet radius client reset counters with traffic to "0".
Wed Jan 13 13:10:18 2016
        Service-Type = Framed-User
        NAS-Port-Id = "wlan-hp-0001"
        NAS-Port-Type = Wireless-802.11
        User-Name = "00:19:E0:12:6F:0B"
        Acct-Session-Id = "82100001"
        Calling-Station-Id = "00-19-E0-12-6F-0B"
        Called-Station-Id = "E4-8D-8C-CC-14-E9:test1"
        Acct-Authentic = RADIUS
        Acct-Status-Type = Interim-Update
        Acct-Session-Time = 60
        Acct-Input-Octets = 5711
        Acct-Input-Gigawords = 0
        Acct-Input-Packets = 18
        Acct-Output-Octets = 1698
        Acct-Output-Gigawords = 0
        Acct-Output-Packets = 81
        NAS-Identifier = "mt-test-tech"
        Acct-Delay-Time = 0
        NAS-IP-Address = 192.168.1.183
        Acct-Unique-Session-Id = "ef610195d450ecbc"
        Timestamp = 1452683418

Wed Jan 13 13:10:35 2016
        Service-Type = Framed-User
        NAS-Port-Id = "wlan-hp-0001"
        NAS-Port-Type = Wireless-802.11
        User-Name = "00:19:E0:12:6F:0B"
        Acct-Session-Id = "82100001"
        Calling-Station-Id = "00-19-E0-12-6F-0B"
        Called-Station-Id = "E4-8D-8C-CC-14-E9:test1"
        Acct-Authentic = RADIUS
        Acct-Status-Type = Stop
        Acct-Session-Time = 77
        Acct-Input-Octets = 0
        Acct-Input-Gigawords = 0
        Acct-Input-Packets = 0
        Acct-Output-Octets = 0
        Acct-Output-Gigawords = 0
        Acct-Output-Packets = 0
        NAS-Identifier = "mt-test-tech"
        Acct-Delay-Time = 0
        NAS-IP-Address = 192.168.1.183
        Acct-Unique-Session-Id = "ef610195d450ecbc"
2) on Radius-Stop packet radius client not sent attribute "Acct-Terminate-Cause"
But without capsman it present:
Mon Jan 11 17:00:46 2016
        Service-Type = Framed-User
        NAS-Port-Id = "wlan1"
        NAS-Port-Type = Wireless-802.11
        User-Name = "00:19:E0:12:6F:0B"
        Acct-Session-Id = "82000000"
        Calling-Station-Id = "00-19-E0-12-6F-0B"
        Called-Station-Id = "E4-8D-8C-CC-14-E9:MT-CC14E9"
        Acct-Authentic = RADIUS
        Acct-Status-Type = Stop
        Acct-Terminate-Cause = Admin-Reset
        Acct-Session-Time = 5
        Acct-Input-Octets = 342
        Acct-Input-Gigawords = 0
        Acct-Input-Packets = 1
        Acct-Output-Octets = 428
        Acct-Output-Gigawords = 0
        Acct-Output-Packets = 9
        NAS-Identifier = "test-hap"
        Acct-Delay-Time = 0
        NAS-IP-Address = 192.168.1.152
        Acct-Unique-Session-Id = "bc33270cb3d017d5"
        Timestamp = 1452524446

Mon Jan 11 17:55:46 2016
        Service-Type = Framed-User
        NAS-Port-Id = "wlan1"
        NAS-Port-Type = Wireless-802.11
        User-Name = "00:19:E0:12:6F:0B"
        Acct-Session-Id = "82000005"
        Calling-Station-Id = "00-19-E0-12-6F-0B"
        Called-Station-Id = "E4-8D-8C-CC-14-E9:MT-CC14E9"
        Acct-Authentic = RADIUS
        Acct-Status-Type = Stop
        Acct-Terminate-Cause = Lost-Service
        Acct-Session-Time = 811
        Acct-Input-Octets = 78928
        Acct-Input-Gigawords = 0
        Acct-Input-Packets = 249
        Acct-Output-Octets = 19180
        Acct-Output-Gigawords = 0
        Acct-Output-Packets = 974
        NAS-Identifier = "test-hap"
        Acct-Delay-Time = 0
        NAS-IP-Address = 192.168.1.152
        Acct-Unique-Session-Id = "ca1f6f3b4a2d4f43"
        Timestamp = 1452527746
Last edited by nik247 on Wed Jan 13, 2016 1:31 pm, edited 1 time in total.
 
Jeanluck
Member Candidate
Member Candidate
Posts: 266
Joined: Tue Apr 19, 2011 7:07 pm

Re: v6.33.5 [current] is released!

Wed Jan 13, 2016 1:30 pm

In 6.34:
*) net - fix bridge firewall chain check (broken since 6.33.2);

But is not in 6.33.5 fix list.
Is not fixed in 6.33.5?
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8292
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: v6.33.5 [current] is released!

Wed Jan 13, 2016 2:00 pm

*) kernel - general improvement for core process scheduling;
what does that mean for performance? :)
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.33.5 [current] is released!

Wed Jan 13, 2016 2:09 pm

Chupaka - It was discussed already in 6.34rc topic and we received pretty positive feedback already
http://forum.mikrotik.com/viewtopic.php ... 00#p512835
http://forum.mikrotik.com/viewtopic.php ... 50#p515541

General kernel improvement was an simple upgrade which can fix some of kernel failures on devices where CPU is 100% loaded.

Jeanluck - This version was built before that fix was made. Version is tested for a while and this particular issue is not resolved yet in 6.33.5.
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2278
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: v6.33.5 [current] is released!

Wed Jan 13, 2016 2:54 pm

Is fixed this bug on mipsle? 6.33.3 don´t work

http://forum.mikrotik.com/viewtopic.php ... le#p512372
Last edited by honzam on Wed Jan 13, 2016 2:58 pm, edited 1 time in total.
LAN, FTTx, Wireless. ISP operator
 
slaystin
just joined
Posts: 3
Joined: Sun Sep 04, 2011 10:50 pm

Re: v6.33.5 [current] is released!

Wed Jan 13, 2016 2:57 pm

This may have been covered before but this is the first time I have encountered it.

from v6.33 on RB951G-2HnD, Winbox->Quick Set->Download & Install, I received "ERROR: missing wireless-6.33.5-mipsbe.npk"

Although I read that this package is no longer current, I had disabled but not yet removed it.

I was able to successfully upgrade, after uninstalling wireless package from router.

Makes sense. Hope that helps.
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.33.5 [current] is released!

Wed Jan 13, 2016 3:53 pm

honzam - We are currently working on a fix for this issue. We have managed to reproduce this issue but in rare occasions so it takes a lot of time to trace roots of it.
slaystin - It is done for purpose (something like double check) so you could see that wireless package will be lost after upgrade. If we would remove it automatically then only notification about it would be changelog.
 
User avatar
IPANetEngineer
Trainer
Trainer
Posts: 985
Joined: Fri Aug 10, 2012 6:46 am
Location: Jackson, MS, USA
Contact:

Re: v6.33.5 [current] is released!

Wed Jan 13, 2016 4:12 pm

*) kernel - general improvement for core process scheduling;
what does that mean for performance? :)
Would love to know more about this as well
Global - MikroTik Support & Consulting - English | Francais | Español | Portuguese +1 855-645-7684
https://iparchitechs.com/services/mikro ... l-support/ mikrotiksupport@iparchitechs.com
 
User avatar
docmarius
Forum Guru
Forum Guru
Posts: 1210
Joined: Sat Nov 06, 2010 12:04 pm
Location: Timisoara, Romania
Contact:

Re: v6.33.5 [current] is released!

Wed Jan 13, 2016 6:08 pm

Something's definitely wrong in this release related to PPPoE/NAT on my RB1100AHx2:
In 6.32.3 I get DL 920 Mbps, UL 200 Mbps (as defined by my provider contract, 1Gbps DL, 200Mbps UL)
In 6.33.5 I get DL 920 Mbps, UL only 25 Mbps.
Reverting to 6.32.3 cures the issue.
Last edited by docmarius on Wed Jan 13, 2016 6:10 pm, edited 1 time in total.
Torturing CCR1009-7G-1C-1S+, RB450G, RB750GL, RB951G-2HnD, RB960PGS, RB260GSP, OmniTIK 5HnD and NetMetal 922UAGS-5HPacD + R11e-5HnD in my home network.
 
User avatar
Cha0s
Forum Veteran
Forum Veteran
Posts: 882
Joined: Tue Oct 11, 2005 4:53 pm

Re: v6.33.5 [current] is released!

Wed Jan 13, 2016 6:10 pm

The changelog date seems to be from last year :P
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2278
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: v6.33.5 [current] is released!

Wed Jan 13, 2016 7:08 pm

honzam - We are currently working on a fix for this issue. We have managed to reproduce this issue but in rare occasions so it takes a lot of time to trace roots of it.
Ok, but why no info on download page? On mipsle (rb532) don´t work 6.33, 6.33.1, 6.33.2, 6.33.3 and 6.33.5
Last working ROS is 6.32.3. from 2015-Oct-19

I upgraded two rb532 and they do not boot. Or boot 1 of 10 tests.

Topic with this known bug is from 15.November 2015
http://forum.mikrotik.com/viewtopic.php?f=2&t=102210

My question is:
Why is 6.33.5 on download page for mipsle?
Why no warning in today changelog as "known issue" ?
Why no warning on download page? :(
LAN, FTTx, Wireless. ISP operator
 
scampbell
Trainer
Trainer
Posts: 446
Joined: Thu Jun 22, 2006 5:20 am
Location: Wellington, NZ
Contact:

Re: v6.33.5 [current] is released!

Wed Jan 13, 2016 10:37 pm

I also just tried a /system packages upgrade upgrade on an SXT on 6.25 running the wireless package.

The device could not be upgraded until I manually upgraded and applied the wireless-fp package which negates the auto-upgrade feature.

I would suggest it should automatically change to wireless-fp or wireless-cm2 without intervention or there be an overide option ? "/system package up up force" for example ? (force = force upgrade of old removed packages)

My preference would be to default to wireless-cm2 but this is only my opinion :-)
Last edited by scampbell on Wed Jan 13, 2016 10:46 pm, edited 2 times in total.
MTCNA, MTCWE, MTCRE, MTCTCE, MTCSE, MTCINE, Trainer
___________________
Mikrotik Distributor - New Zealand
http://www.campbell.co.nz
 
scampbell
Trainer
Trainer
Posts: 446
Joined: Thu Jun 22, 2006 5:20 am
Location: Wellington, NZ
Contact:

Re: v6.33.5 [current] is released!

Wed Jan 13, 2016 10:39 pm

Oh and switch menu still missing on RB3011 Winbox :-) Not in 6.34rc34 yet either FYI
MTCNA, MTCWE, MTCRE, MTCTCE, MTCSE, MTCINE, Trainer
___________________
Mikrotik Distributor - New Zealand
http://www.campbell.co.nz
 
Beone
Member Candidate
Member Candidate
Posts: 243
Joined: Fri Feb 11, 2011 1:11 pm

Re: v6.33.5 [current] is released!

Thu Jan 14, 2016 12:44 am

In v6.33.5 present bugs (found in 6.33.3 two days ago) with capsman and radius:

1) on Radius-Stop packet radius client reset counters with traffic to "0".
Wed Jan 13 13:10:18 2016
        Service-Type = Framed-User
        NAS-Port-Id = "wlan-hp-0001"
        NAS-Port-Type = Wireless-802.11
        User-Name = "00:19:E0:12:6F:0B"
        Acct-Session-Id = "82100001"
        Calling-Station-Id = "00-19-E0-12-6F-0B"
        Called-Station-Id = "E4-8D-8C-CC-14-E9:test1"
        Acct-Authentic = RADIUS
        Acct-Status-Type = Interim-Update
        Acct-Session-Time = 60
        Acct-Input-Octets = 5711
        Acct-Input-Gigawords = 0
        Acct-Input-Packets = 18
        Acct-Output-Octets = 1698
        Acct-Output-Gigawords = 0
        Acct-Output-Packets = 81
        NAS-Identifier = "mt-test-tech"
        Acct-Delay-Time = 0
        NAS-IP-Address = 192.168.1.183
        Acct-Unique-Session-Id = "ef610195d450ecbc"
        Timestamp = 1452683418

Wed Jan 13 13:10:35 2016
        Service-Type = Framed-User
        NAS-Port-Id = "wlan-hp-0001"
        NAS-Port-Type = Wireless-802.11
        User-Name = "00:19:E0:12:6F:0B"
        Acct-Session-Id = "82100001"
        Calling-Station-Id = "00-19-E0-12-6F-0B"
        Called-Station-Id = "E4-8D-8C-CC-14-E9:test1"
        Acct-Authentic = RADIUS
        Acct-Status-Type = Stop
        Acct-Session-Time = 77
        Acct-Input-Octets = 0
        Acct-Input-Gigawords = 0
        Acct-Input-Packets = 0
        Acct-Output-Octets = 0
        Acct-Output-Gigawords = 0
        Acct-Output-Packets = 0
        NAS-Identifier = "mt-test-tech"
        Acct-Delay-Time = 0
        NAS-IP-Address = 192.168.1.183
        Acct-Unique-Session-Id = "ef610195d450ecbc"
2) on Radius-Stop packet radius client not sent attribute "Acct-Terminate-Cause"
But without capsman it present:
Mon Jan 11 17:00:46 2016
        Service-Type = Framed-User
        NAS-Port-Id = "wlan1"
        NAS-Port-Type = Wireless-802.11
        User-Name = "00:19:E0:12:6F:0B"
        Acct-Session-Id = "82000000"
        Calling-Station-Id = "00-19-E0-12-6F-0B"
        Called-Station-Id = "E4-8D-8C-CC-14-E9:MT-CC14E9"
        Acct-Authentic = RADIUS
        Acct-Status-Type = Stop
        Acct-Terminate-Cause = Admin-Reset
        Acct-Session-Time = 5
        Acct-Input-Octets = 342
        Acct-Input-Gigawords = 0
        Acct-Input-Packets = 1
        Acct-Output-Octets = 428
        Acct-Output-Gigawords = 0
        Acct-Output-Packets = 9
        NAS-Identifier = "test-hap"
        Acct-Delay-Time = 0
        NAS-IP-Address = 192.168.1.152
        Acct-Unique-Session-Id = "bc33270cb3d017d5"
        Timestamp = 1452524446

Mon Jan 11 17:55:46 2016
        Service-Type = Framed-User
        NAS-Port-Id = "wlan1"
        NAS-Port-Type = Wireless-802.11
        User-Name = "00:19:E0:12:6F:0B"
        Acct-Session-Id = "82000005"
        Calling-Station-Id = "00-19-E0-12-6F-0B"
        Called-Station-Id = "E4-8D-8C-CC-14-E9:MT-CC14E9"
        Acct-Authentic = RADIUS
        Acct-Status-Type = Stop
        Acct-Terminate-Cause = Lost-Service
        Acct-Session-Time = 811
        Acct-Input-Octets = 78928
        Acct-Input-Gigawords = 0
        Acct-Input-Packets = 249
        Acct-Output-Octets = 19180
        Acct-Output-Gigawords = 0
        Acct-Output-Packets = 974
        NAS-Identifier = "test-hap"
        Acct-Delay-Time = 0
        NAS-IP-Address = 192.168.1.152
        Acct-Unique-Session-Id = "ca1f6f3b4a2d4f43"
        Timestamp = 1452527746
We are having the same issue, RADIUS accounting STOP messages are 0 with RADIUS/capsman
 
User avatar
boen_robot
Forum Guru
Forum Guru
Posts: 2411
Joined: Thu Aug 31, 2006 4:43 pm
Location: europe://Bulgaria/Plovdiv

Re: v6.33.5 [current] is released!

Thu Jan 14, 2016 12:58 am

Purely out of curiosity... Why was 6.33.4 skipped?
PEAR2_Net_RouterOS(1.0.0b6) - My API client in PHP
(Rate my posts? If you want... no pressure...)
 
_saik0
Member Candidate
Member Candidate
Posts: 127
Joined: Sun Aug 26, 2007 11:18 pm

Re: v6.33.5 [current] is released!

Thu Jan 14, 2016 1:23 am

Just upgraded both of my CCR1036.

IPSEC issue still present - [Ticket#2015122766000277] CCR IPSEC in-state-sequence-errors
Left duplex iperf tests for a few hours and was greeted with a downed tunnel and state sequence errors.
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1717
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: v6.33.5 [current] is released!

Thu Jan 14, 2016 6:47 am

Purely out of curiosity... Why was 6.33.4 skipped?
read the bottom of the first post.
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.
 
makstex
newbie
Posts: 46
Joined: Fri Mar 27, 2009 6:31 am

Re: v6.33.5 [current] is released!

Thu Jan 14, 2016 7:05 am

Correct file paths please.
You do not have the required permissions to view the files attached to this post.
 
User avatar
G2Dolphin
Member Candidate
Member Candidate
Posts: 154
Joined: Sun May 17, 2015 6:03 pm
Location: Moscow, Russia

Re: v6.33.5 [current] is released!

Thu Jan 14, 2016 8:52 am

Correct file paths please.
Read whole thread please.
slaystin - It is done for purpose (something like double check) so you could see that wireless package will be lost after upgrade. If we would remove it automatically then only notification about it would be changelog.
Home: RB3011UiAS-IN (2011 case+3011-RM), hAP ac, mAP2n/mAP2nD, GrooveA-52HPn, hEX (r3), hAP lite, RB951G-2HnD
Work: RB2011UiAS-RM / UiAS-2HnD-IN, RB951G-2HnD, hEX (r3), CRS125-24G-1S-2HnD-IN, CCR1009-8G-1S-1S+
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.33.5 [current] is released!

Thu Jan 14, 2016 8:57 am

Usually there are two types of people:
1) Ones who need some specific fix and want full version released as soon as possible;
2) Ones who have routers where everything is working correctly and says - please test versions for a while and only then release them.

We are trying to find a middle path between two of these. Also since there were so many holidays in December this version was delayed more than others. 6.33.4 was built for factory purposes.

In changelog it is mentioned that wireless package is removed. You can not upgrade version without removing package manually. Either we allow you to do it manually or remove package automatically. If we would remove package automatically then there would be again complaints that it happened without users knowing it.

Version is not complete bugfix version. We are still working on many fixes which will be included in upcoming 6.x.y versions. Please review changelog before you upgrade version and decide if you need/want to upgrade. Only then proceed.

People who are reporting issues about version. Please check if issue persist in latest rc version if possible. If issue is fixed then report to support@mikrotik.com so we would know which fix must be included in next 6.33.y version. If it is not fixed, then contact support@mikrotik.com so we could investigate what is wrong there.
 
User avatar
delix
just joined
Posts: 15
Joined: Mon Aug 06, 2012 12:09 am
Location: Simferopol, Ukraine

Re: v6.33.5 [current] is released!

Thu Jan 14, 2016 9:24 am

Client v6.33.5 crashes on start in Win7 with errors:

Сигнатура проблемы:
Имя события проблемы: APPCRASH
Имя приложения: dude.exe
Версия приложения: 0.0.0.0
Отметка времени приложения: 5680e38e
Имя модуля с ошибкой: StackHash_0a9e
Версия модуля с ошибкой: 0.0.0.0
Отметка времени модуля с ошибкой: 00000000
Код исключения: c0000005
Смещение исключения: 00000000
Версия ОС: 6.1.7601.2.1.0.256.1
Код языка: 1049
Дополнительные сведения 1: 0a9e
Дополнительные сведения 2: 0a9e372d3b4ad19135b953a78882e789
Дополнительные сведения 3: 0a9e
Дополнительные сведения 4: 0a9e372d3b4ad19135b953a78882e789
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1717
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: v6.33.5 [current] is released!

Thu Jan 14, 2016 9:32 am

Dude was introduced in 6.34rc, so it doesn't work in 6.33.x, it is only logical.
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.
 
makstex
newbie
Posts: 46
Joined: Fri Mar 27, 2009 6:31 am

Re: v6.33.5 [current] is released!

Thu Jan 14, 2016 11:28 am

All of my routers MIPSBE 6.33.3 are now restarted with the following error on Picture.
Prior to the publication of this update 6.33.5 was not!
Please rename the package wireless-fp in wireless, so you can automatically update.
All routers configured to automatically update script:
/system package update
check-for-updates
:delay 5s;
:if ( [get installed-version] != [get latest-version]) do={ install }
6.33.5 on the list - I updated the hands, or they have no support WiFi, or initially install the package FP.
You do not have the required permissions to view the files attached to this post.
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.33.5 [current] is released!

Thu Jan 14, 2016 11:33 am

makstex - Was this leak on 6.33.3 or on 6.33.5? Please send supout files to support@mikrotik.com as fast as possible. Reboot router, generate supout file then wait until RAM starts to fill up. Then generate another supout file and send both of them to us. We will try to find out what is going on there.
 
makstex
newbie
Posts: 46
Joined: Fri Mar 27, 2009 6:31 am

Re: v6.33.5 [current] is released!

Thu Jan 14, 2016 11:35 am

Leak on 6.33.3.
Constantly trying to download Wireless-6.33.5.npk.
Create it with the size = 0 in the file system, I get an error and gradually decreases available memory. If you disable the update package, everything OK. But updating your hands all the routers I get tired.
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1717
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: v6.33.5 [current] is released!

Thu Jan 14, 2016 12:07 pm

how did you implemented that upgrade? some kind of script that repeats in the schedule? why? :) Do you spam mikrotik with requests all the time?
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.
 
makstex
newbie
Posts: 46
Joined: Fri Mar 27, 2009 6:31 am

Re: v6.33.5 [current] is released!

Thu Jan 14, 2016 12:10 pm

No. Sheduled on 5:XX(random minutes) am.
But for some reason it does not stop because of the missing file on the server.
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.33.5 [current] is released!

Thu Jan 14, 2016 12:24 pm

makstex - At your script add parameter "once". Test after that and please let us know it that helped.

/system package update
check-for-updates once
:delay 5s;
:if ( [get installed-version] != [get latest-version]) do={ install once}
 
makstex
newbie
Posts: 46
Joined: Fri Mar 27, 2009 6:31 am

Re: v6.33.5 [current] is released!

Thu Jan 14, 2016 12:54 pm

makstex - At your script add parameter "once". Test after that and please let us know it that helped.

/system package update
check-for-updates once
:delay 5s;
:if ( [get installed-version] != [get latest-version]) do={ install once}
Thanks!
Fixed.
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.33.5 [current] is released!

Thu Jan 14, 2016 1:09 pm

So you were one of those people who were spamming our servers time to time :)

Everyone, please if you have automated scripts make sure that they can not get stuck in loop. Use parameters "once" to make sure that upgrade commands are used only once.

We will try to improve upgrade commands from our side too so it would stop once error is received.
 
User avatar
spippan
Member Candidate
Member Candidate
Posts: 100
Joined: Wed Nov 12, 2014 1:00 pm

Re: v6.33.5 [current] is released!

Thu Jan 14, 2016 1:46 pm

*) kernel - general improvement for core process scheduling;
what does that mean for performance? :)
Would love to know more about this as well
viewtopic.php?f=1&t=102105&start=100#p512835
viewtopic.php?f=1&t=102105&start=150#p515541
---
raiffeisen data center infrastructure and security
...stay curious
 
User avatar
BMan
just joined
Posts: 6
Joined: Sat Mar 14, 2015 9:53 pm

Re: v6.33.5 [current] is released!

Thu Jan 14, 2016 2:04 pm

v6.33.5 - don't create Default Configuration (RB941-2nD, RB951Ui-2HnD)

In RouterOS v6.33.5 at hAP lite (RB941-2nD-TC) and RB951Ui-2HnD after reset to Default Configuration create Blank Configuration.
In RouterOS v6.33.3 at hAP lite and RB951Ui-2HnD there is no such problem. Default Configuration creates without any troubles.

It looks like:
What's new in 6.32.1 (2015-Sep-07 13:03):
*) defconf - fix default configuration for routers without wireless package.
MTCNA, MTCRE
CRS125, RB2011, RB951, hAP lite
 
zoj
just joined
Posts: 10
Joined: Sat Aug 18, 2012 12:33 am

Re: v6.33.5 [current] is released!

Thu Jan 14, 2016 3:24 pm

Problem with connection by OpenVPN when use wildcard certificate.
I upgraded from 6.32.3 to 6.33.5
Thu Jan 14 14:15:31 2016 MANAGEMENT: >STATE:1452777331,AUTH,,,
Thu Jan 14 14:15:31 2016 TLS: Initial packet from [AF_INET]185.24.218.67:443, sid=ac90cb04 27ee7edf
Thu Jan 14 14:15:32 2016 VERIFY ERROR: depth=0, error=unable to get local issuer certificate: OU=Domain Control Validated, CN=*.test.eu
Thu Jan 14 14:15:32 2016 TLS_ERROR: BIO read tls_read_plaintext error: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed
Thu Jan 14 14:15:32 2016 TLS Error: TLS object -> incoming plaintext read error
Thu Jan 14 14:15:32 2016 TLS Error: TLS handshake failed
Thu Jan 14 14:15:32 2016 Fatal TLS error (check_tls_errors_co), restarting
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 5913
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: v6.33.5 [current] is released!

Thu Jan 14, 2016 3:54 pm

Wildcards are not supported in certificate CN.
 
mujian
just joined
Posts: 3
Joined: Wed Jan 28, 2015 5:03 pm

Re: v6.33.5 [current] is released!

Thu Jan 14, 2016 5:37 pm

Starting from 6.33, kvm virtual openwrt does not work, the image is downloaded from the official website openwrt,
http://downloads.openwrt.org/barrier_br ... xt4.img.gz
ROS Log in Tip :kvm,error kvm guest crashed,restarting
Back to the normal version 6.32.3
 
User avatar
mjs
just joined
Posts: 2
Joined: Tue Jun 16, 2015 11:34 pm

Re: v6.33.5 [current] is released!

Thu Jan 14, 2016 9:12 pm

Oh and switch menu still missing on RB3011 Winbox :-) Not in 6.34rc34 yet either FYI
6.34rc36 still missing Switch menu, Master Port on Interface General Tab & CPU Clock on System/Resources in WinBox. As well as not supporting Hardware Encryption yet!
You do not have the required permissions to view the files attached to this post.
 
Pada
Member Candidate
Member Candidate
Posts: 150
Joined: Tue Dec 08, 2009 11:37 pm
Location: South Africa, Stellenbosch

Re: v6.33.5 [current] is released!

Thu Jan 14, 2016 9:28 pm

I tried the automatic updating from 6.33.3 to 6.33.5 and also got the missing wireless package message.

I then uninstalled it and restarted, which then resulted in a incomplete upgrade to 6.33.5, where the ppp package wasn't installed and now even after I manually reinstalled 6.32.3 I lost all my pppoe client & wireless interfaces.
 
agnostic
Frequent Visitor
Frequent Visitor
Posts: 54
Joined: Fri Mar 21, 2014 8:23 pm

Re: v6.33.5 [current] is released!

Thu Jan 14, 2016 10:32 pm

experiencing continuous port flapping problems since upgrade on two rb951-2n and an rb750 in switching configuration with vlans. it floods the log with ether up/down (only interfaces from the switch group 2-5) and the leds from rb's951 ethernet turn off and on again. anyone experiencing the same??
 
Thalid
newbie
Posts: 38
Joined: Sun Mar 31, 2013 11:33 pm

Re: v6.33.5 [current] is released!

Thu Jan 14, 2016 10:49 pm

For those getting the "ERROR: missing wireless-6.33.5-mipsbe.npk"
This pack have been replaced by the wireless-fp

You need to uninstall the old pack and install the new.
Why we start to get this now i domt know my 435 was on 6.30.2 and it just now i got it

Doing it this wayover the wireless is gonna break you wifi so there must be a bether way

What's new in 6.30 (2015-Jul-08 09:07):
*) removed wireless package from routeros bundle package,
new wireless-fp is left in place and wireless-cm2 added as option
 
coylh
Member Candidate
Member Candidate
Posts: 160
Joined: Tue Jul 12, 2011 12:11 am

Re: v6.33.5 [current] is released!

Fri Jan 15, 2016 2:33 am

Wildcards are not supported in certificate CN.
Is this a change from previous versions? I use a wildcard certificate for SSTP on 6.30.
 
synapsis
newbie
Posts: 26
Joined: Thu Jan 13, 2005 7:41 am
Location: Canberra, Australia

Re: v6.33.5 [current] is released!

Fri Jan 15, 2016 6:15 am

Hi there

I'm getting the following error when I try and download and install:

ERROR: missing wireless-6.33.5-ppc.npk

Regards

Richard
 
kaushik2aki
just joined
Posts: 7
Joined: Sun Jul 21, 2013 9:23 pm

Re: v6.33.5 [current] is released!

Fri Jan 15, 2016 7:05 am

After update software in ccr 1009

arp list show mac 00:00:00:00:00:00

like this what i do
 
Thalid
newbie
Posts: 38
Joined: Sun Mar 31, 2013 11:33 pm

Re: v6.33.5 [current] is released!

Fri Jan 15, 2016 7:22 am

Hi there

I'm getting the following error when I try and download and install:

ERROR: missing wireless-6.33.5-ppc.npk

Regards

Richard
Se my previos post about the wireless error
 
jaytcsd
Member Candidate
Member Candidate
Posts: 281
Joined: Wed Dec 29, 2004 9:50 am
Location: Pittsboro IN
Contact:

Re: v6.33.5 [current] is released!

Fri Jan 15, 2016 11:34 am

Is this OK for routerboard 133 and 532?
My RB133 died after upgrading to 6.33, now I can't get netinstall to see it to force it back to 6.32 like you suggested.
 
ste
Forum Guru
Forum Guru
Posts: 1786
Joined: Sun Feb 13, 2005 11:21 pm

Re: v6.33.5 [current] is released!

Fri Jan 15, 2016 11:38 am

Is this OK for routerboard 133 and 532?
My RB133 died after upgrading to 6.33, now I can't get netinstall to see it to force it back to 6.32 like you suggested.
Dont you think it's time to retire esp RB133. We trashed some 100 of them. I completely understand that MT do not waste time to test newer releases on these old boards.
 
ghitone
just joined
Posts: 5
Joined: Fri Oct 11, 2013 3:36 pm

Re: v6.33.5 [current] is released!

Fri Jan 15, 2016 11:41 am

Hi all

I have noticed a strange behavior on SFP interface (no ip set to it - 2 VLANs created on it for logical connectivity). Lot's of broadcast packet to all sorts of destinations not in the IP domains configured. I've noticed that when checking the ARP entries (now showing incomplete MACs). The broadcast rate is 25-30 pps.

Thanks
 
makstex
newbie
Posts: 46
Joined: Fri Mar 27, 2009 6:31 am

Re: v6.33.5 [current] is released!

Fri Jan 15, 2016 1:23 pm

Bug.
WatchDog is off.
You do not have the required permissions to view the files attached to this post.
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8292
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: v6.33.5 [current] is released!

Fri Jan 15, 2016 1:36 pm

looks like "Watchdog Timer" is hardware watchdog. setting "Watch Address" enables software watchdog which pings that address independently of hardware one. so you also need to unset the address to disable this behaviour
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 5913
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: v6.33.5 [current] is released!

Fri Jan 15, 2016 1:53 pm

Wildcards are not supported in certificate CN.
Is this a change from previous versions? I use a wildcard certificate for SSTP on 6.30.
Not sure how ot worked for you but officially such feature was never implemented.

Who is online

Users browsing this forum: No registered users and 3 guests