Community discussions

MUM Europe 2020
 
DjM
Member Candidate
Member Candidate
Posts: 111
Joined: Sun Dec 27, 2009 2:44 pm

Re: v6.35rc is released, new wireless package!

Tue Feb 16, 2016 3:42 pm

Version 6.35rc5 has been released.

Changes since previous version:
*) ssh - fixed connection stalling.
Hello MikroTik support team,

Can you please share more details of this bug?
- In which version was the bug introduced?
- In which cases is the login process stalling?

Thank you
 
User avatar
Cha0s
Forum Veteran
Forum Veteran
Posts: 913
Joined: Tue Oct 11, 2005 4:53 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Tue Feb 16, 2016 3:53 pm

Any news regarding Voltage being reported wrong on RB2011-UiAS?
http://forum.mikrotik.com/viewtopic.php ... 75#p520275
 
PeterDoBrasil
Member Candidate
Member Candidate
Posts: 134
Joined: Sun Aug 23, 2015 6:55 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Feb 17, 2016 5:38 am

6.35rc9 has been released.

Changes since previous version:
*) dude - (changes discussed here: http://forum.mikrotik.com/viewtopic.php?f=8&t=104395);
*) l2tp - added support for proxy authentication when receiving forwarded PPPoE sesssions;
*) l2tp - added support for Hidden AVP, it is needed for proxy authentication;
*) ipsec - fix larval SA refresh for display;
*) wireless-rep - added 802.11g/n only band;
*) wireless-rep,capsman - added rate config support;
*) wireless-rep,capsman - added more configuration settings;
*) ssh - simplify login process;
*) ups - fix entering hibernate mode when below battery capacity limit;
*) ups - fix waiting for AC power restore in hibernate mode;
*) lte - fix allowed bands for RBSXTLTE3-7;
*) lte - support for zte mf820s2.

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
I can't find this, in 2,4 ghz device and not in 5,8 ghz (6.35rc10)
wireless-rep - added 802.11g/n only band;
You do not have the required permissions to view the files attached to this post.
Last edited by PeterDoBrasil on Wed Feb 17, 2016 8:38 pm, edited 1 time in total.
 
npero
Member
Member
Posts: 316
Joined: Tue Mar 01, 2005 1:59 pm
Location: Serbia

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Feb 17, 2016 7:59 am

[
I can't find this, in 2,4 ghz device and not in 5,8 ghz (6.35rc10)
wireless-rep - added 802.11g/n only band;

802.11b or 802.11g is working on 2.4GHz not 5GHz look the wikipedia https://en.wikipedia.org/wiki/IEEE_802.11
 
User avatar
juanvi
Member Candidate
Member Candidate
Posts: 164
Joined: Mon May 05, 2014 6:55 pm
Location: SPAIN

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Feb 17, 2016 11:06 am

"wireless-rep,capsman - added more configuration settings" and other options questions. Can you explain, put an example, or complete the online manual for:

- CAP's Access rule -> SSID Regexp (SSID is Ap side fixed parameter, cant understand it as an Access rule)

- New CAP's provisioning -> Identity Regexp (thinking abou matching rules for pre-configured CAP's /system/identity? )

Thanks to all inadvance.
¡vʞvdnX puv ···SOɹǝʇnoɹ ʞıʇoɹʞıW oʇ sʞuvHʇ
 
PeterDoBrasil
Member Candidate
Member Candidate
Posts: 134
Joined: Sun Aug 23, 2015 6:55 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Feb 17, 2016 8:36 pm

no g-n.png
[
I can't find this, in 2,4 ghz device and not in 5,8 ghz (6.35rc10)
wireless-rep - added 802.11g/n only band;

802.11b or 802.11g is working on 2.4GHz not 5GHz look the wikipedia https://en.wikipedia.org/wiki/IEEE_802.11
You do not have the required permissions to view the files attached to this post.
 
ivicask
Member Candidate
Member Candidate
Posts: 243
Joined: Tue Jul 07, 2015 2:40 pm
Location: Croatia, Zagreb

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Feb 17, 2016 11:03 pm

no g-n.png
[
I can't find this, in 2,4 ghz device and not in 5,8 ghz (6.35rc10)
wireless-rep - added 802.11g/n only band;

802.11b or 802.11g is working on 2.4GHz not 5GHz look the wikipedia https://en.wikipedia.org/wiki/IEEE_802.11
Yes same here
 
Zorro
Long time Member
Long time Member
Posts: 676
Joined: Wed Apr 16, 2014 2:43 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Feb 18, 2016 7:24 am

is any decription/changelog for 635rc11, yet ?
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1722
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Feb 18, 2016 7:39 am

is any decription/changelog for 635rc11, yet ?
it is on the download page:
What's new in 6.35rc11 (2016-Feb-17 09:09):

*) winbox - added factory-firmware field to system/routerboard;
*) l2tp - ipsec peer & policy sometimes was not removed after l2tp interface disable;
*) pptp - fixed kernel crash when receiving fragmented packet with fragmented header;
*) www - fixed www crash;
*) winbox - fixed email address saving;
For others with wireless band issues -
1) make sure that you are running wireless-rep package;
2) check CLI - features comes to Winbox later that CLI.
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Feb 18, 2016 8:22 am

Version 6.35rc11 has been released yesterday.

Changes since previous version:
*) dude - (changes discussed here: http://forum.mikrotik.com/viewtopic.php?f=8&t=104395);
*) winbox - added factory-firmware field to system/routerboard;
*) l2tp - ipsec peer & policy sometimes was not removed after l2tp interface disable;
*) pptp - fixed kernel crash when receiving fragmented packet with fragmented header;
*) www - fixed www crash;
*) winbox - fixed email address saving.

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
Morpheus1607
newbie
Posts: 34
Joined: Fri Jul 25, 2014 1:17 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Feb 18, 2016 11:49 am

*) queue - added bucket-size setting to queues (derived from max-limit);
*) queue - improve "/queue interface" menu;

What does it mean???


I had updated a test device, but it uses no queues. What is the difference to older versions?

i see on the queue interface all interfaces/bridges get an "no-queue"

any information about that?
 
easyspot
Frequent Visitor
Frequent Visitor
Posts: 66
Joined: Thu Jun 07, 2012 7:09 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Feb 18, 2016 2:12 pm

I think its better to have bucket-size value in kb, just like in squid delay pool.
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1722
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Feb 18, 2016 3:33 pm

It is radio to max-limit (0,1 is 10%)

HTB (Hierarchical Token Bucket) is finally getting custom size buckets :)
https://en.wikipedia.org/wiki/Token_bucket

basically this option can eliminate any need for bursts options, and allow much more neat hierarchical structures.
I do not understand how it will work if bucket size is 0 :).

Simple burst behavior can be achieved by use values more that 1. For example if you set bucket-size=4 max-limit=10M - first 40Mb will cross the queue with virtually unlimited speed.

I plan to use this analogy when explainig it in future:
05-animal-driven-waterwheels-are-known-in-murcia-as-norias-de-sangre.jpg
bucket size determines amount of delivered water ( traffic) per take, you cannot control the amount of water in the bucket (it always come full), but you can control number of buckets per second, bigger buckets = smaller number of buckets per second = more burstness of the traffic (and i would imagine less load on CPU)
You do not have the required permissions to view the files attached to this post.
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.
 
User avatar
BartoszP
Forum Guru
Forum Guru
Posts: 1719
Joined: Mon Jun 16, 2014 1:13 pm
Location: Poland

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Feb 18, 2016 11:40 pm

No way to upgrade 741TC from 6.35rc8 to 6.35.rc11 because of "low memory"
741TC.PNG
You do not have the required permissions to view the files attached to this post.
Real admins use real keyboards.
 
darkprocess
Member Candidate
Member Candidate
Posts: 253
Joined: Fri Mar 20, 2015 1:16 pm

v6.35rc [release candidate] is released, new wireless package!

Thu Feb 18, 2016 11:48 pm

Edit the queue on this interface. I had the issue with my openvpn connections
 
PeterDoBrasil
Member Candidate
Member Candidate
Posts: 134
Joined: Sun Aug 23, 2015 6:55 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Feb 19, 2016 2:26 am

is any decription/changelog for 635rc11, yet ?
it is on the download page:
What's new in 6.35rc11 (2016-Feb-17 09:09):

*) winbox - added factory-firmware field to system/routerboard;
*) l2tp - ipsec peer & policy sometimes was not removed after l2tp interface disable;
*) pptp - fixed kernel crash when receiving fragmented packet with fragmented header;
*) www - fixed www crash;
*) winbox - fixed email address saving;
For others with wireless band issues -
1) make sure that you are running wireless-rep package;
2) check CLI - features comes to Winbox later that CLI.
! No band g/n Option !!!
1.png
2.png
3.png
You do not have the required permissions to view the files attached to this post.
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Feb 19, 2016 8:17 am

BartoszP - Upgrade in this device happens within RAM memory;
PeterDoBrasil - For now it is available only through CLI.
 
jarda
Forum Guru
Forum Guru
Posts: 7604
Joined: Mon Oct 22, 2012 4:46 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Feb 19, 2016 10:56 am

BartoszP - Upgrade in this device happens within RAM memory

You must be kidding.



Bartoszp, install system package only, reboot. You will get space and then install only additional packages you need in second stage. After that you will have enough space for future updates. At least so far...

The lacking of ram and flash capacity in new models is awful.
 
hedele
Member
Member
Posts: 338
Joined: Tue Feb 24, 2009 11:23 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Feb 19, 2016 11:16 am

Is RAM upgrade maybe also coming to CCR devices?
The reason I'm asking is that for some reason, RouterOS for tile is HUGE when installed (46 MiB used out of 128 MiB on a CCR1016-12S-1S+), which makes using partitions almost impossible now (barely enough space to perform upgrade when using 2 partitions at 64 MiB each). CCRs have plenty of RAM, but it can't be used for upgrades. Why is installed size on CCRs so large? The .npk is smaller than the powerpc version, but when installed ROS is twice the size!

For that reason I am currently not using partitions on CCR1016s even though I would like to, because i am afraid that with future ROS versions, install/package size will grow even more until I finally run out of space :( If you compare, ROS 6.1 npk for tile had around 14,2 MiB size, ROS 6.32.4 already has 16,5 MiB, and with more and more features being added, the size will probably not get any smaller in the future.
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Feb 19, 2016 11:29 am

It is explained here:
http://wiki.mikrotik.com/wiki/Manual:System/File
Warning: If device has a directory named "flash" in its file list, then files which you want to be kept after system reboot/power cycle must be stored within it. As anything outside of it is kept within a RAM disk and will be lost upon reboot. Note: this does not include .npk upgrade files as they will be applied by upgrade process before system discards the RAM drive content.
 
User avatar
Cha0s
Forum Veteran
Forum Veteran
Posts: 913
Joined: Tue Oct 11, 2005 4:53 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Feb 19, 2016 1:21 pm

He is not kidding. Upgrade happens in RAM, and it does not matter how much storage you have. Upload goes directly into RAMDRIVE. Please stop spreading misinformation about uploading only one package, this just breaks things
Kidding or not, misinformation or not, your suggested method has not worked for me.
While jarda's worked just fine.

So is it misinformation when your method is not working properly?

The bottom line is that using jarda's method I did my job. So fix your software if you don't want 'misinformation' going around.
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Feb 19, 2016 1:22 pm

Most likely you just rebooted device which erased RAM memory and after reboot you had enough space for upgrade.
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Feb 19, 2016 1:23 pm

 
User avatar
Cha0s
Forum Veteran
Forum Veteran
Posts: 913
Joined: Tue Oct 11, 2005 4:53 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Feb 19, 2016 1:49 pm

Most likely you just rebooted device which erased RAM memory and after reboot you had enough space for upgrade.
http://forum.mikrotik.com/viewtopic.php ... 43#p519443
The device on that screenshot was just rebooted. Since it's with an rc version it was used for testing and not in production.
Thus no ram was used since no special config was done on the device.

So, since I've been doing it wrong for the last 10 years using Mikrotik, what should have been the proper way to upgrade the hAP without resorting to not using the combined package as Jarda suggested (and worked right away) ?
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Feb 19, 2016 2:58 pm

Again - Warning: If device has a directory named "flash"...
Upgrade happens like this only with devices which has flash memory. I guess we have such devices for about a year now.

Do you have actual screen shot where you could see that free RAM memory > necessary memory for upgrade?
 
User avatar
Cha0s
Forum Veteran
Forum Veteran
Posts: 913
Joined: Tue Oct 11, 2005 4:53 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Feb 19, 2016 3:00 pm

No but I know that the free memory was ~11mbyte.
 
User avatar
Cha0s
Forum Veteran
Forum Veteran
Posts: 913
Joined: Tue Oct 11, 2005 4:53 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Feb 19, 2016 3:03 pm

Again - Warning: If device has a directory named "flash"...
Yeah, what about it?
I don't want to store files. I want to upgrade. From what you are saying upgrades happen in RAM. So what does it matter weather there is a flash folder or not?

In general SMIPS is a disaster in terms of usability.
It forces us to use Winbox 3 which is super buggy and it cannot upgrade like every other device model you make...
 
PeterDoBrasil
Member Candidate
Member Candidate
Posts: 134
Joined: Sun Aug 23, 2015 6:55 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Feb 19, 2016 3:18 pm

BartoszP - Upgrade in this device happens within RAM memory;
PeterDoBrasil - For now it is available only through CLI.
What means CLI??? I don't understand what is CLI????
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24315
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Feb 19, 2016 3:20 pm

BartoszP - Upgrade in this device happens within RAM memory;
PeterDoBrasil - For now it is available only through CLI.
What means CLI??? I don't understand what is CLI????
CLI means "Command line Interface", when you connect with SSH for example
No answer to your question? How to write posts
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Feb 19, 2016 3:23 pm

Cha0s - About upgrade - my mistake. Every device which has flash memory (except SMIPS) performs upgrade within RAM memory. hAP lite has flash storage but does not have flash folder so upgrade happens within flash directory. Sorry about that. Upgrade bundle + other package is not possible because there is not enough space for it. .

If you have other SMIPS and Winbox related issues, then please report to support@mikrotik.com. We are not aware about still existing issues with SMIPS or Winbox which would break workflow.
 
jarda
Forum Guru
Forum Guru
Posts: 7604
Joined: Mon Oct 22, 2012 4:46 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Feb 19, 2016 3:25 pm

strods and normis,
sorry I made you angry. You have my full respect and I am very gratefull to you for what you are doing.

But this situation is a bit different. You have seen a picture where was clearly visible that BartoszP pressed "download" or "download and install" button in system-packages after checking for update. The response was that there is not enough space for it. Instead of providing him a working solution you stated that update is made in memory. How it is heplful when on my 941s is normally 4-6MB of free ram? His devices run similarly probably.

I would not suggest to him any procedure that I had not tested before. I did not wanted to make such tests at all, but your approach forced me to do so, because I am having the same problems as BartoszP so I have developed a way ho to perform the update even there is not enough space for it... My way works, your statements are for nothing. Yes, finally everyone can make netinstall, but why, if there is a workable workaround?

If you think my suggestions just breaks things, you shoul also explain what things and how will be broken. I have not realised anything like this.

And what is the root cause? I can tell you.

Firstly, it is your decision to make new devices with just 32MB of RAM although I (and others) are telling you that it is too small amount of memory. And besides that, you decided to provide almost any flash memory. OK, I know, 16MB in this case, but not usable to store the packages to be installed, as the running ros is already installed there.

Secondly it is your decision to ship the devices with preinstalled bundled set of packages, many of them disabled, not necessary for "ordinary home users", but just occupying space on flash. More over that, if automatcially updated, these useless packages have to be downloaded and stored to be updated too. You know I was asking you long time ago not to ship devices with one bundled package but with "individually" preinstalled packages so the user could be able to fully remove the ones he does not need. It would free the flash and also the next updates will be smaller so they probably could fit in ram/flash to be updated automatically. It is still not clear for me why are you doing this.

You surely remember why you had to remove the winbox dll file from smips ros and therefore needed to release winbox v.3. I am very curious how you will ensure update operation within ros7. I am expecting the ros7 will be again a bit bigger to store... Maybe it will force you to admit that I was right by doing the things I have suggested to you long time ago and this time again.

Cha0s,
thank you confirming my statements. Obviously you have the same experience.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24315
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Feb 19, 2016 3:32 pm

Looks like you posted before Strods made the post before yours.

So in the end, if you want to use bundle, use bundle. If you want something special, don't use bundle, but install all packages one by one.
No answer to your question? How to write posts
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Feb 19, 2016 3:37 pm

Version 6.35rc12 has been released.

Changes since previous version:
*) dude - (changes discussed here: http://forum.mikrotik.com/viewtopic.php?f=8&t=104395);
*) pppoe-client - implemented fastpath support;
*) ssl - optimized certificate update;
*) ospf - fixed crash when getting neighbor router-id in NBMA area;
*) romon-ssh - fixed active addresses for romon user;
*) email - fix send cmd server addr override.

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Feb 19, 2016 3:38 pm

jarda - Sorry. this time it was my mistake. Often also we forget that hAP lite does not have flash folder. I guess I can blame Friday :)
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1722
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Feb 19, 2016 3:53 pm

Wait! What??
*) pppoe-client - implemented fastpath support;
MT you need to stop destroying my weekends, now i need to test this.... :)

I love versions before the big MUM events - all good stuff is coming out.
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.
 
PeterDoBrasil
Member Candidate
Member Candidate
Posts: 134
Joined: Sun Aug 23, 2015 6:55 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Feb 19, 2016 4:35 pm

BartoszP - Upgrade in this device happens within RAM memory;
PeterDoBrasil - For now it is available only through CLI.
What means CLI??? I don't understand what is CLI????
CLI means "Command line Interface", when you connect with SSH for example
Hey Normis, Is this an Hotspot Bug ????
http://forum.mikrotik.com/viewtopic.php?f=2&t=105022 :(
 
User avatar
BartoszP
Forum Guru
Forum Guru
Posts: 1719
Joined: Mon Jun 16, 2014 1:13 pm
Location: Poland

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Feb 19, 2016 4:38 pm

... You have seen a picture where was clearly visible that BartoszP pressed "download" or "download and install" button in system-packages after checking for update. The response was that there is not enough space for it............
Firstly, it is your decision to make new devices with just 32MB of RAM although I (and others) are telling you that it is too small amount of memory. And besides that, you decided to provide almost any flash memory. OK, I know, 16MB in this case, but not usable to store the packages to be installed, as the running ros is already installed there.
A. Restart helped ... inmemory upgrade have made my RB741 @ rc11 ... why not to put "inmemory upgrade in progress" instead of "too low space" ?
B. What about situation when my address lists, rules lists will be too big in total for downloading package to make inmemory upgrade ?
C. 16MB flash as a disk is ... TOO SMALL ... what about importing scripts, making backups before upgrade etc. ?
D. "My new preciousssss" ... hAP AC has only 16MB too .... it is strange for such powerfull device ... how to make it main router ?
962.PNG
You do not have the required permissions to view the files attached to this post.
Real admins use real keyboards.
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Feb 19, 2016 5:45 pm

BartoszP - Previously it was my mistake. We have many devices which uses flash memory. They all can be divided in two groups - smips devices and other devices. hAP lite is smips device and performs upgrade within flash memory (this I messed up previously). Other devices which has flash memory but are not smips devices are upgraded by using RAM memory.

smips platform is called like that for a reason, It is most simple platform which we have and should be used for simple home configurations. In such cases memory should be used basically only for export files.

As it goes for hAP ac and other devices which are not smips devices but has flash memory - they still are simple home routers. There is plenty space for backup, some other things and, if you need something more, then there is a USB port on which you can attach any USB drive and use as a storage device.

If you have other questions, then please turn to support. This is still 6.35rc topic and problems related to this particular version should be discussed here :)
 
zinkpad
just joined
Posts: 16
Joined: Fri Jun 26, 2015 11:24 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Feb 19, 2016 6:29 pm

Yeah, pppoe-client fastpath support!!! :D :D

Now I can reach 306Mbps download speed (http://www.speedtest.net), and CPU is 34%-40% (on 6.34.2 was 85%), tested on RB951G / Movistar / Spain.

Image

Thanks MikroTik, great job!!
Software developer
GitHub profile: https://github.com/zinkpad
 
milenabraham8
just joined
Posts: 1
Joined: Sat Feb 20, 2016 8:09 am
Contact:

Re: v6.35rc [release candidate] is released, new wireless package!

Sat Feb 20, 2016 8:13 am

Which one is the latest? I need a latest router. Please reply
Book Review Writing Services helps students to write their book review
 
jarda
Forum Guru
Forum Guru
Posts: 7604
Joined: Mon Oct 22, 2012 4:46 pm

Sat Feb 20, 2016 8:45 am

What does it mean - latest router? And why do you need it? Without any information I cannot suggest to you other version than 6.32.3. Even though the 6.32.4 is out already for some time I have not tested it enough yet and I have no need to change the production version so far.
 
Sob
Forum Guru
Forum Guru
Posts: 4855
Joined: Mon Apr 20, 2009 9:11 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Sun Feb 21, 2016 1:53 am

It means one point for spammer and zero for jarda, better luck next time. ;)

I don't know if the signature was there before you replied or if it was added later, but it's quite obvious with it. User's first post, does not make much sense, but they made sure they added the signature with link to some commercial activity.
People who quote full posts should be spanked with ethernet cable. Some exceptions for multi-topic threads may apply.
 
shifto
just joined
Posts: 13
Joined: Wed Jul 15, 2015 1:58 am

Re: v6.35rc [release candidate] is released, new wireless package!

Sun Feb 21, 2016 3:55 am

Yeah, pppoe-client fastpath support!!! :D :D

Now I can reach 306Mbps download speed (http://www.speedtest.net), and CPU is 34%-40% (on 6.34.2 was 85%), tested on RB951G / Movistar / Spain.

Image

Thanks MikroTik, great job!!
Yes, nice feature indeed. :)

Image
 
jarda
Forum Guru
Forum Guru
Posts: 7604
Joined: Mon Oct 22, 2012 4:46 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Sun Feb 21, 2016 8:42 am

It means one point for spammer and zero for jarda, better luck next time. ;)

I don't know if the signature was there before you replied or if it was added later, but it's quite obvious with it. User's first post, does not make much sense, but they made sure they added the signature with link to some commercial activity.
There is no signature displayed in tapatalk. I am not aware about it.
 
PeterDoBrasil
Member Candidate
Member Candidate
Posts: 134
Joined: Sun Aug 23, 2015 6:55 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Sun Feb 21, 2016 2:55 pm

BartoszP - Upgrade in this device happens within RAM memory;
PeterDoBrasil - For now it is available only through CLI.
What means CLI??? I don't understand what is CLI????
CLI means "Command line Interface", when you connect with SSH for example

Hello Normis! Can You Help me Here?
http://forum.mikrotik.com/viewtopic.php?f=1&t=104879
 
notToNew
Member Candidate
Member Candidate
Posts: 148
Joined: Fri Feb 19, 2016 3:15 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Feb 22, 2016 12:23 pm

Tested the repeater-mode on hap-ac lite: it works with win10-laptop, with android-phones,but not with winXP-Wifi.
This simply doesn't get an IP.

11:20:31 wireless,info 00:0E:35:D6:11:EF@wlan1_ap2: connected
11:20:31 wireless,info 00:0E:35:D6:11:EF@wlan1_ap2: reassociating
11:20:31 wireless,info 00:0E:35:D6:11:EF@wlan1_ap2: disconnected, ok
11:20:31 wireless,info 00:0E:35:D6:11:EF@wlan1_ap2: connected
11:20:31 wireless,info 00:0E:35:D6:11:EF@wlan1_ap2: reassociating
11:20:31 wireless,info 00:0E:35:D6:11:EF@wlan1_ap2: disconnected, ok
11:20:31 wireless,info 00:0E:35:D6:11:EF@wlan1_ap2: connected
11:20:32 wireless,info 00:0E:35:D6:11:EF@wlan1_ap2: reassociating
11:20:32 wireless,info 00:0E:35:D6:11:EF@wlan1_ap2: disconnected, ok
11:20:32 wireless,info 00:0E:35:D6:11:EF@wlan1_ap2: connected
11:20:32 wireless,info 00:0E:35:D6:11:EF@wlan1_ap2: reassociating
11:20:32 wireless,info 00:0E:35:D6:11:EF@wlan1_ap2: disconnected, ok
11:20:32 wireless,info 00:0E:35:D6:11:EF@wlan1_ap2: connected
11:20:32 wireless,info 00:0E:35:D6:11:EF@wlan1_ap2: reassociating
11:20:32 wireless,info 00:0E:35:D6:11:EF@wlan1_ap2: disconnected, ok
11:20:32 wireless,info 00:0E:35:D6:11:EF@wlan1_ap2: connected
11:20:32 wireless,info 00:0E:35:D6:11:EF@wlan1_ap2: disconnected, received deauth: unspecified (1)

When configuring an non-virtual AP in Mikrotik, the XP-Laptop (with Intel-Hardware) can connect as expected.

Do i miss anything?

--> I love the new feature, it helps me a lot
--------------------------------------------------------------------------------------------
CCR1036-12G-4S, several 952Ui-5ac2nD, ...
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Feb 22, 2016 2:31 pm

notToNew

Please execute this command on your device:
"/system logging add topics=wireless,debug"

After that try to connect again. If logs do not show you error right away, then generate supout file and send it to support@mikrotik.com for checking.

Here you can see how to generate supout file:
http://wiki.mikrotik.com/wiki/Manual:Su ... utput_File
 
picacho99
newbie
Posts: 42
Joined: Mon Sep 08, 2014 7:16 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Tue Feb 23, 2016 9:36 pm

About this nice feature "*) pppoe-client - implemented fastpath support;"

Is the RB3011 RouterOS specific version really supporting fastpath ?
Why this question:
- It not appears listed as supported in the WIKI page on fatspath.
- My testing after applying the firewall rules and having the counter growing...does not seem to provide any CPU saving on RB3011.

Please, Mikrotik, may you clarify this: today, an RB3011 dowloading one TCP stream at 300 Mbits over PPP and having NAT and a basic configuration of firewall rules needs 80% of one CPU to handle this trafic with spikes up to 90% at 1400 mhz frequency...

This device is starting to remember me the buggy RB850x2: lower performance than anticipated, strange problems (software bridge problems,...), features not working (partition not working,...), hardware revisions (I hope this not again, please)...

It would be "funny" to have to go back to an RB2011: starting to become tired to be patient with MIkrotik...RB3011 is not a 100$ device.
 
picacho99
newbie
Posts: 42
Joined: Mon Sep 08, 2014 7:16 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Tue Feb 23, 2016 9:50 pm

And when you plan to fix this "dirty" SNTP behaviour in RB3011 ?

605 Feb/23/2016 15:45:19 memory system, info sntp change time Feb/23/2016 15:45:16 => Feb/23/2016 15:45:19
606 Feb/23/2016 15:47:30 memory system, info sntp change time Feb/23/2016 15:47:27 => Feb/23/2016 15:47:30
607 Feb/23/2016 15:48:19 memory system, info sntp change time Feb/23/2016 15:48:18 => Feb/23/2016 15:48:19
608 Feb/23/2016 15:49:25 memory system, info sntp change time Feb/23/2016 15:49:23 => Feb/23/2016 15:49:25
609 Feb/23/2016 15:56:14 memory system, info sntp change time Feb/23/2016 15:56:05 => Feb/23/2016 15:56:14
610 Feb/23/2016 15:57:20 memory system, info sntp change time Feb/23/2016 15:57:18 => Feb/23/2016 15:57:20
611 Feb/23/2016 15:58:25 memory system, info sntp change time Feb/23/2016 15:58:24 => Feb/23/2016 15:58:25
612 Feb/23/2016 16:00:36 memory system, info sntp change time Feb/23/2016 16:00:33 => Feb/23/2016 16:00:36
613 Feb/23/2016 16:01:42 memory system, info sntp change time Feb/23/2016 16:01:40 => Feb/23/2016 16:01:42
614 Feb/23/2016 16:04:26 memory system, info sntp change time Feb/23/2016 16:04:22 => Feb/23/2016 16:04:26
615 Feb/23/2016 16:05:15 memory system, info sntp change time Feb/23/2016 16:05:14 => Feb/23/2016 16:05:15
616 Feb/23/2016 16:06:20 memory system, info sntp change time Feb/23/2016 16:06:19 => Feb/23/2016 16:06:20
617 Feb/23/2016 16:08:31 memory system, info sntp change time Feb/23/2016 16:08:28 => Feb/23/2016 16:08:31
618 Feb/23/2016 16:12:53 memory system, info sntp change time Feb/23/2016 16:12:47 => Feb/23/2016 16:12:53
619 Feb/23/2016 16:37:15 memory system, info sntp change time Feb/23/2016 16:36:41 => Feb/23/2016 16:37:15
620 Feb/23/2016 16:38:20 memory system, info sntp change time Feb/23/2016 16:38:19 => Feb/23/2016 16:38:20
621 Feb/23/2016 16:40:31 memory system, info sntp change time Feb/23/2016 16:40:28 => Feb/23/2016 16:40:31
622 Feb/23/2016 16:42:42 memory system, info sntp change time Feb/23/2016 16:42:39 => Feb/23/2016 16:42:42
623 Feb/23/2016 16:44:53 memory system, info sntp change time Feb/23/2016 16:44:50 => Feb/23/2016 16:44:53
624 Feb/23/2016 16:45:43 memory system, info sntp change time Feb/23/2016 16:45:41 => Feb/23/2016 16:45:43
625 Feb/23/2016 16:49:15 memory system, info sntp change time Feb/23/2016 16:49:11 => Feb/23/2016 16:49:15
626 Feb/23/2016 16:50:21 memory system, info sntp change time Feb/23/2016 16:50:19 => Feb/23/2016 16:50:21
627 Feb/23/2016 16:53:37 memory system, info sntp change time Feb/23/2016 16:53:33 => Feb/23/2016 16:53:37
628 Feb/23/2016 16:54:27 memory system, info sntp change time Feb/23/2016 16:54:25 => Feb/23/2016 16:54:27
629 Feb/23/2016 16:55:32 memory system, info sntp change time Feb/23/2016 16:55:31 => Feb/23/2016 16:55:32
630 Feb/23/2016 16:57:43 memory system, info sntp change time Feb/23/2016 16:57:40 => Feb/23/2016 16:57:43
631 Feb/23/2016 17:11:06 memory system, info sntp change time Feb/23/2016 17:10:47 => Feb/23/2016 17:11:06
632 Feb/23/2016 17:11:55 memory system, info sntp change time Feb/23/2016 17:11:54 => Feb/23/2016 17:11:55
633 Feb/23/2016 17:13:00 memory system, info sntp change time Feb/23/2016 17:12:59 => Feb/23/2016 17:13:00
634 Feb/23/2016 17:15:11 memory system, info sntp change time Feb/23/2016 17:15:08 => Feb/23/2016 17:15:11
635 Feb/23/2016 17:19:21 memory dhcp, info dhcpNoSecure assigned 192.168.60.247 to XXXXXX
636 Feb/23/2016 17:19:33 memory system, info sntp change time Feb/23/2016 17:19:27 => Feb/23/2016 17:19:33
637 Feb/23/2016 17:43:55 memory system, info sntp change time Feb/23/2016 17:43:21 => Feb/23/2016 17:43:55
638 Feb/23/2016 17:45:00 memory system, info sntp change time Feb/23/2016 17:44:59 => Feb/23/2016 17:45:00
639 Feb/23/2016 17:45:50 memory system, info sntp change time Feb/23/2016 17:45:48 => Feb/23/2016 17:45:50
640 Feb/23/2016 17:49:55 memory system, info sntp change time Feb/23/2016 17:49:50 => Feb/23/2016 17:49:55
641 Feb/23/2016 17:51:01 memory system, info sntp change time Feb/23/2016 17:50:59 => Feb/23/2016 17:51:01
642 Feb/23/2016 17:51:50 memory system, info sntp change time Feb/23/2016 17:51:49 => Feb/23/2016 17:51:50
643 Feb/23/2016 17:55:23 memory system, info sntp change time Feb/23/2016 17:55:18 => Feb/23/2016 17:55:23
644 Feb/23/2016 17:58:07 memory system, info sntp change time Feb/23/2016 17:58:03 => Feb/23/2016 17:58:07
645 Feb/23/2016 18:01:23 memory system, info sntp change time Feb/23/2016 18:01:19 => Feb/23/2016 18:01:23
646 Feb/23/2016 18:04:40 memory system, info sntp change time Feb/23/2016 18:04:35 => Feb/23/2016 18:04:40
647 Feb/23/2016 18:05:29 memory system, info sntp change time Feb/23/2016 18:05:28 => Feb/23/2016 18:05:29
648 Feb/23/2016 18:06:34 memory system, info sntp change time Feb/23/2016 18:06:33 => Feb/23/2016 18:06:34
649 Feb/23/2016 18:08:45 memory system, info sntp change time Feb/23/2016 18:08:42 => Feb/23/2016 18:08:45
650 Feb/23/2016 18:22:40 memory system, info sntp change time Feb/23/2016 18:22:21 => Feb/23/2016 18:22:40
651 Feb/23/2016 18:24:51 memory system, info sntp change time Feb/23/2016 18:24:48 => Feb/23/2016 18:24:51
652 Feb/23/2016 18:25:57 memory system, info sntp change time Feb/23/2016 18:25:55 => Feb/23/2016 18:25:57
653 Feb/23/2016 18:30:19 memory system, info sntp change time Feb/23/2016 18:30:13 => Feb/23/2016 18:30:19
654 Feb/23/2016 18:31:08 memory system, info sntp change time Feb/23/2016 18:31:07 => Feb/23/2016 18:31:08
655 Feb/23/2016 18:35:14 memory system, info sntp change time Feb/23/2016 18:35:08 => Feb/23/2016 18:35:14
656 Feb/23/2016 18:36:03 memory system, info sntp change time Feb/23/2016 18:36:02 => Feb/23/2016 18:36:03
657 Feb/23/2016 18:37:08 memory system, info sntp change time Feb/23/2016 18:37:07 => Feb/23/2016 18:37:08
658 Feb/23/2016 18:43:58 memory system, info sntp change time Feb/23/2016 18:43:48 => Feb/23/2016 18:43:58
659 Feb/23/2016 18:44:47 memory system, info sntp change time Feb/23/2016 18:44:46 => Feb/23/2016 18:44:47
660 Feb/23/2016 18:45:52 memory system, info sntp change time Feb/23/2016 18:45:51 => Feb/23/2016 18:45:52
661 Feb/23/2016 18:48:03 memory system, info sntp change time Feb/23/2016 18:48:00 => Feb/23/2016 18:48:03
662 Feb/23/2016 18:52:25 memory system, info sntp change time Feb/23/2016 18:52:19 => Feb/23/2016 18:52:25
663 Feb/23/2016 19:01:09 memory system, info sntp change time Feb/23/2016 19:00:57 => Feb/23/2016 19:01:09
664 Feb/23/2016 19:16:31 memory system, info sntp change time Feb/23/2016 19:16:09 => Feb/23/2016 19:16:31
665 Feb/23/2016 19:31:52 memory system, info sntp change time Feb/23/2016 19:31:31 => Feb/23/2016 19:31:52
666 Feb/23/2016 19:47:13 memory system, info sntp change time Feb/23/2016 19:46:52 => Feb/23/2016 19:47:13
667 Feb/23/2016 20:02:00 memory dhcp, info dhcpNoSecure assigned 192.168.60.240 to uuuuuuuuuuu
668 Feb/23/2016 20:19:17 memory system, info sntp change time Feb/23/2016 20:18:33 => Feb/23/2016 20:19:17
669 Feb/23/2016 20:20:07 memory system, info sntp change time Feb/23/2016 20:20:05 => Feb/23/2016 20:20:07
670 Feb/23/2016 20:21:12 memory system, info sntp change time Feb/23/2016 20:21:11 => Feb/23/2016 20:21:12
671 Feb/23/2016 20:25:43 memory dhcp, info dhcpNoSecure assigned 192.168.60.252 to HHHHHHHH
672 Feb/23/2016 20:28:02 memory system, info sntp change time Feb/23/2016 20:27:52 => Feb/23/2016 20:28:02
673 Feb/23/2016 20:28:51 memory system, info sntp change time Feb/23/2016 20:28:50 => Feb/23/2016 20:28:51
674 Feb/23/2016 20:29:56 memory system, info sntp change time Feb/23/2016 20:29:55 => Feb/23/2016 20:29:56
675 Feb/23/2016 20:36:46 memory system, info sntp change time Feb/23/2016 20:36:36 => Feb/23/2016 20:36:46
676 Feb/23/2016 20:39:29 memory system, info sntp change time Feb/23/2016 20:39:26 => Feb/23/2016 20:39:29
677 Feb/23/2016 20:40:18 memory system, info sntp change time Feb/23/2016 20:40:17 => Feb/23/2016 20:40:18
678 Feb/23/2016 20:41:24 memory system, info sntp change time Feb/23/2016 20:41:22 => Feb/23/2016 20:41:24
 
ofca
Member Candidate
Member Candidate
Posts: 190
Joined: Fri Aug 20, 2004 7:18 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Feb 24, 2016 4:34 am

strods,

is there any hope for a minor change to LCD, adding a screen that only displays a logo from branding package or some custom png and nothing else?
More details and some discussion here, http://forum.mikrotik.com/viewtopic.php?f=3&t=104820

I'd be grateful and happy. ;)
 
jarda
Forum Guru
Forum Guru
Posts: 7604
Joined: Mon Oct 22, 2012 4:46 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Feb 24, 2016 7:54 am

About this nice feature "*) pppoe-client - implemented fastpath support;"

Is the RB3011 RouterOS specific version really supporting fastpath ?
Why this question:
- It not appears listed as supported in the WIKI page on fatspath.
- My testing after applying the firewall rules and having the counter growing...does not seem to provide any CPU saving on RB3011.

Please, Mikrotik, may you clarify this: today, an RB3011 dowloading one TCP stream at 300 Mbits over PPP and having NAT and a basic configuration of firewall rules needs 80% of one CPU to handle this trafic with spikes up to 90% at 1400 mhz frequency...

This device is starting to remember me the buggy RB850x2: lower performance than anticipated, strange problems (software bridge problems,...), features not working (partition not working,...), hardware revisions (I hope this not again, please)...

It would be "funny" to have to go back to an RB2011: starting to become tired to be patient with MIkrotik...RB3011 is not a 100$ device.
Are you really expecting fastpath when firewall rules are implemented?

Try fasttrack in this case.
 
picacho99
newbie
Posts: 42
Joined: Mon Sep 08, 2014 7:16 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Feb 24, 2016 2:57 pm

About this nice feature "*) pppoe-client - implemented fastpath support;"

Is the RB3011 RouterOS specific version really supporting fastpath ?
Why this question:
- It not appears listed as supported in the WIKI page on fatspath.
- My testing after applying the firewall rules and having the counter growing...does not seem to provide any CPU saving on RB3011.

Please, Mikrotik, may you clarify this: today, an RB3011 dowloading one TCP stream at 300 Mbits over PPP and having NAT and a basic configuration of firewall rules needs 80% of one CPU to handle this trafic with spikes up to 90% at 1400 mhz frequency...

This device is starting to remember me the buggy RB850x2: lower performance than anticipated, strange problems (software bridge problems,...), features not working (partition not working,...), hardware revisions (I hope this not again, please)...

It would be "funny" to have to go back to an RB2011: starting to become tired to be patient with MIkrotik...RB3011 is not a 100$ device.
Are you really expecting fastpath when firewall rules are implemented?

Try fasttrack in this case.
No, but please, be smart too....before trying to teach please learn to read....and use fair-play...please, perhaps,...

What can provide fastrack if trafic over a pure software based not optimized ppoe client implementation?

This combination of both works like a charm in two tested mono-CPU devices....shared by other contributors in this same topic and configuration.
 
picacho99
newbie
Posts: 42
Joined: Mon Sep 08, 2014 7:16 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Feb 26, 2016 8:22 pm

About this nice feature "*) pppoe-client - implemented fastpath support;"

Is the RB3011 RouterOS specific version really supporting fastpath ?
Why this question:
- It not appears listed as supported in the WIKI page on fatspath.
- My testing after applying the firewall rules and having the counter growing...does not seem to provide any CPU saving on RB3011.

Please, Mikrotik, may you clarify this: today, an RB3011 dowloading one TCP stream at 300 Mbits over PPP and having NAT and a basic configuration of firewall rules needs 80% of one CPU to handle this trafic with spikes up to 90% at 1400 mhz frequency...

This device is starting to remember me the buggy RB850x2: lower performance than anticipated, strange problems (software bridge problems,...), features not working (partition not working,...), hardware revisions (I hope this not again, please)...

It would be "funny" to have to go back to an RB2011: starting to become tired to be patient with MIkrotik...RB3011 is not a 100$ device.
Are you really expecting fastpath when firewall rules are implemented?

Try fasttrack in this case.
No, but please, be smart too....before trying to teach please learn to read....and use fair-play...please, perhaps,...

What can provide fastrack if trafic over a pure software based not optimized ppoe client implementation?

This combination of both works like a charm in two tested mono-CPU devices....shared by other contributors in this same topic and configuration.

Ooppss *) pppoe-client - implemented fastpath support.... ????
it works over RB2011 but it does NOT works over RB3011.

Same fiber connection (300/30 Mbits) and RouterOS configuration testing RB2011 and RB3011, with these results:
- RB2011...6.34.2 - CPU usage 100% (298 Mits)
- RB2011...6.35rc12 - CPU usage between 32-38% (305 Mbits)
- RB3011...6.35rc11 and sooner - CPU usage TOTAL: 45%, ONE CPU 80-90%, the OTHER CPU 2-3% (305 Mbits)
- RB3011...6.35rc12 - CPU usage TOTAL: 45%, ONE CPU 80-90%, the OTHER CPU 2-3% (305 Mbits)

Symthom: FP RX counter for PPOE client conection is always zero in RB3011 (not for FP TX...)
 
LightnetBarry
just joined
Posts: 13
Joined: Tue Jun 05, 2012 2:56 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Feb 26, 2016 8:32 pm

*) l2tp - added support for proxy authentication when receiving forwarded PPPoE sesssions;
*) l2tp - added support for Hidden AVP, it is needed for proxy authentication;

I'm presuming this only means that LNS functionality is working and that I still cannot use Mikrotik as a LAC to do Proxy LCP to a Cisco PPPoE server?

Will I ever be able to???
 
picacho99
newbie
Posts: 42
Joined: Mon Sep 08, 2014 7:16 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Feb 26, 2016 9:46 pm

tok, tok....
 
jondavy
Member Candidate
Member Candidate
Posts: 130
Joined: Tue May 12, 2009 11:14 pm
Location: Brasil

Re: v6.35rc [release candidate] is released, new wireless package!

Sat Feb 27, 2016 11:49 pm

vlan not working on bridge interfaces
 
NGiannis
just joined
Posts: 3
Joined: Sat Feb 06, 2016 1:43 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Sun Feb 28, 2016 4:24 am

Hi,

I have two wireless stations where I want to use and share their connection as access point. I am using the first as the main and the second a backup.

I have used as below:
WLAN 1: Station 1
WLAN 2: AP
WLAN 3: Station 2
Untitled.png
When routing only WLAN 3 as station to WLAN 2 as access point on high loads over 50kbps I am facing interruptions.
Any idea?
You do not have the required permissions to view the files attached to this post.
 
jcsogo
just joined
Posts: 1
Joined: Sun Feb 28, 2016 1:16 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Sun Feb 28, 2016 1:24 pm

Many many many thanks for implementing fastpath over pppoe. It is a highe improvement to be able to keep using (and recommending) your routers to those people with ISPs using PPPoE.

Kudos!
 
milandraca
just joined
Posts: 1
Joined: Sun Feb 28, 2016 8:49 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Sun Feb 28, 2016 9:10 pm

Background scan with NV2 protocol please! Are you work in the backround spectral scan? It would be a ubnt mouth shut!


Thanks for all the nice things!
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Feb 29, 2016 9:36 am

Version 6.35rc14 has been released.

Changes since previous version:

*) dude - (changes discussed here: http://forum.mikrotik.com/viewtopic.php?f=8&t=104395);
*) pppoe-client - implemented fastpath support;
*) pppoe - added rfc4679 support;
*) pppoe-server - added pado-delay option;
*) ppp - close connection if peer wants to re-authenticate;
*) winbox - added missing modp8192 to /ipsec peer dh-group;
*) winbox - limit ospf key to 16 symbols;
*) snmp - fix cpu load reporting to 1min average and change oid to 1.3.6.1.4.1.2021.11.10.0;
*) mpls - do not reset VPLS on TE tunnel re-optimize;
*) lcd - add flip-screen option;
*) lcd - security screen did not show ip addresses on ccr;
*) interface queue - fixed "no-queue" on upgrade;
*) fastpath - fixed rare kernel failure;
*) lte - fixed bandlux modem dialing;
*) wireless-rep - fixed qos frame-priroty when nv2 protocol used in station-wds mode;
*) wireless - improved 1-chain 802.11ac station campability with other vendor multichain APs.


If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1825
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Feb 29, 2016 10:04 am

Nice work on all the new PPPoE features !
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
Siona
Frequent Visitor
Frequent Visitor
Posts: 83
Joined: Thu Jan 29, 2015 11:56 am

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Feb 29, 2016 11:28 am

Voltage monitor on RB493G still not working.
 
Lombart
just joined
Posts: 6
Joined: Mon Mar 05, 2012 11:18 am

Re: v6.35rc is released, new wireless package!

Mon Feb 29, 2016 12:18 pm

Wow! This new wireless-rep is fantastic! All my UDP packets are consistent, I have not lost a single packet! Amazing work guys!
can you share config for wireless-rep ?

can someone post how to config wireless-rep step by step? i've been searching over here and google but can't find the answer

thx before
 
WirelessRudy
Forum Guru
Forum Guru
Posts: 3089
Joined: Tue Aug 08, 2006 5:54 pm
Location: Spain

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Feb 29, 2016 12:44 pm

Version 6.35rc14 has been released.
What happened with rc13?
Show your appreciation of this post by giving me Karma! Thanks.

Rudy R. Puister

WISP operator based on MT routerboard & ROS.
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Feb 29, 2016 1:12 pm

Any of rc versions can be skipped for multiple reasons. It could be bad, it could be waiting for additional fixes/implementation to work properly, next version can be built before we launch previous one. There are multiple possibilities and that do not mean anything at all.
 
User avatar
Alessio Garavano
Member
Member
Posts: 304
Joined: Sat May 29, 2004 12:49 am
Location: Corrientes, Argentina
Contact:

Re: v6.35rc is released, new wireless package!

Mon Feb 29, 2016 6:21 pm

Wow! This new wireless-rep is fantastic! All my UDP packets are consistent, I have not lost a single packet! Amazing work guys!
can you share config for wireless-rep ?

can someone post how to config wireless-rep step by step? i've been searching over here and google but can't find the answer

thx before
yes! +1 for that!
Alessio Garavano
http://www.isparg.com.ar
 
easyspot
Frequent Visitor
Frequent Visitor
Posts: 66
Joined: Thu Jun 07, 2012 7:09 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Tue Mar 01, 2016 12:41 am

Version 6.35rc14 has been released.
What happened with rc13?
Mikrotik crew believe in fengshui that said number 13 is bad so that's why they skip rc13 lol :lol:
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Tue Mar 01, 2016 8:31 am

Version 6.35rc15 has been released.

Changes since previous version:

*) l2tp - implemented l2tp (and lns) initial fastpath support;
*) ppp - fixed ppp crash;
*) gre - fixed memory leak;
*) netinstall - fixed link negotiation for different sfp modules;
*) snmp - fixed dhcpv4 lease hwaddr format according to mib;
*) rb3011 - fixed high cpu load breaks ethernet stats.

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
PeterDoBrasil
Member Candidate
Member Candidate
Posts: 134
Joined: Sun Aug 23, 2015 6:55 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Tue Mar 01, 2016 6:52 pm

Version 6.35rc14 has been released.

Changes since previous version:

*) dude - (changes discussed here: http://forum.mikrotik.com/viewtopic.php?f=8&t=104395);
*) pppoe-client - implemented fastpath support;
*) pppoe - added rfc4679 support;
*) pppoe-server - added pado-delay option;
*) ppp - close connection if peer wants to re-authenticate;
*) winbox - added missing modp8192 to /ipsec peer dh-group;
*) winbox - limit ospf key to 16 symbols;
*) snmp - fix cpu load reporting to 1min average and change oid to 1.3.6.1.4.1.2021.11.10.0;
*) mpls - do not reset VPLS on TE tunnel re-optimize;
*) lcd - add flip-screen option;
*) lcd - security screen did not show ip addresses on ccr;
*) interface queue - fixed "no-queue" on upgrade;
*) fastpath - fixed rare kernel failure;
*) lte - fixed bandlux modem dialing;
*) wireless-rep - fixed qos frame-priroty when nv2 protocol used in station-wds mode;
*) wireless - improved 1-chain 802.11ac station campability with other vendor multichain APs.


If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
Iám running v.14 on 4 devices, sxt, Rb2011,BaseBox, without any Problems!
 
nobodymb
just joined
Posts: 1
Joined: Wed Mar 02, 2016 1:38 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 02, 2016 1:41 pm

HAP ac on Version 6.35rc15 l2tp/ipsec is not working on windows 7. On 6.34.2 everything is working fine with same settings
 
nkourtzis
Member Candidate
Member Candidate
Posts: 206
Joined: Tue Dec 11, 2012 12:56 am
Location: Greece

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 02, 2016 2:21 pm

HAP ac on Version 6.35rc15 l2tp/ipsec is not working on windows 7. On 6.34.2 everything is working fine with same settings
Same here, since 6.35rc14. PPtP not working either. "Encryption method not supported" even without encryption. Opened a support ticket with supout (Ticket#2016030266000632).
Passionate about networks
Enthusiastic about Mikrotik
MTCNA | MTCRE | MTCINE

No trees were killed to send this message,
but a large number of electrons were terribly inconvenienced.
 
andersonlich
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Thu Feb 26, 2009 1:05 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 02, 2016 4:02 pm

PPP fixed crash..?
Is that by mean on pppoe-server or pppoe-client?
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 03, 2016 8:16 am

Version 6.35rc16 has been released.

Changes since previous version:
*) l2tp - implemented l2tp and lns fastpath support;
*) pppoe-client - implemented fastpath support;
*) ssh - fix crash on failed scp read;
*) chr - fixed layer7 firewall option/crash.

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
DariusIII
just joined
Posts: 1
Joined: Fri Jul 13, 2012 11:53 am

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 03, 2016 10:30 am

HAP ac on Version 6.35rc15 l2tp/ipsec is not working on windows 7. On 6.34.2 everything is working fine with same settings
Same here, since 6.35rc14. PPtP not working either. "Encryption method not supported" even without encryption. Opened a support ticket with supout (Ticket#2016030266000632).
Even with latest RC this is still an issue.
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 03, 2016 10:41 am

HAP ac on Version 6.35rc15 l2tp/ipsec is not working on windows 7. On 6.34.2 everything is working fine with same settings
Same here, since 6.35rc14. PPtP not working either. "Encryption method not supported" even without encryption. Opened a support ticket with supout (Ticket#2016030266000632).
Even with latest RC this is still an issue.
I see that message from support is sent to you and we have not received reply.
 
nkourtzis
Member Candidate
Member Candidate
Posts: 206
Joined: Tue Dec 11, 2012 12:56 am
Location: Greece

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 03, 2016 5:34 pm

Same here, since 6.35rc14. PPtP not working either. "Encryption method not supported" even without encryption. Opened a support ticket with supout (Ticket#2016030266000632).
Even with latest RC this is still an issue.
I see that message from support is sent to you and we have not received reply.

Sorry, missed that. I tried what was suggested, same result. :-(
Passionate about networks
Enthusiastic about Mikrotik
MTCNA | MTCRE | MTCINE

No trees were killed to send this message,
but a large number of electrons were terribly inconvenienced.
 
buckthis
just joined
Posts: 5
Joined: Wed Apr 29, 2015 9:01 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Mar 04, 2016 6:08 am

Upgraded to 6.35rc16 (from rc14) on three devices as wireless was starting to act up (slow). Immediately I lost control of the cAPs as the interfaces started bouncing.
(1) - RB2011UiAS-2HnD-IN
(2) - RBcAP 2n

To recover...
I had to disable CAPsMAN interfaces to get control of the two cAPS.
Downgraded all gear to 6.35rc12, no change, wireless was still dead (CAPsMAN was not controlling the cAPs)
Restored configs on all three devices and BAM, everything was back to normal

* using wireless-rep in all version mentioned
 
PeterDoBrasil
Member Candidate
Member Candidate
Posts: 134
Joined: Sun Aug 23, 2015 6:55 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Mar 04, 2016 3:51 pm

6.35rc16 my RB2011UiAS-2HnD-IN enabling CAPsMan and usuig the Routers wlan interface as Cap the router reboots every +- 2 minutes, crashes
 
raffav
Member Candidate
Member Candidate
Posts: 291
Joined: Wed Oct 24, 2012 4:40 am

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Mar 04, 2016 3:57 pm

On RC16 if capsman is enable it make the cap to loop boot kernel error
 
uldis
MikroTik Support
MikroTik Support
Posts: 3427
Joined: Mon May 31, 2004 2:55 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Mar 04, 2016 4:18 pm

On RC16 if capsman is enable it make the cap to loop boot kernel error
This problem is fixed in the latest RouterOS v6.35rc19
 
WirelessRudy
Forum Guru
Forum Guru
Posts: 3089
Joined: Tue Aug 08, 2006 5:54 pm
Location: Spain

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Mar 04, 2016 4:26 pm

On RC16 if capsman is enable it make the cap to loop boot kernel error
This problem is fixed in the latest RouterOS v6.35rc19
rc16 ==> rc19??
Too many failures in between? :?
Show your appreciation of this post by giving me Karma! Thanks.

Rudy R. Puister

WISP operator based on MT routerboard & ROS.
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Topic Author
Posts: 6617
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Mar 04, 2016 4:49 pm

6.35rc19 has been released!

What's new in 6.35rc19 (2016-Mar-04 11:46):

*) ppp - fixed ppp crash (make it work with Windows clients);
*) l2tp - implemented l2tp and lns fastpath/fasttrack support;
*) cerm - revoked certificates not showing as (R)evoked;
*) console - show RouterOS Version in /interface wireless scan;
*) export - bonding did not show up in global export;
*) export - fixed export when ipv6 address was taken from pool
*) fetch - decrease connection idle timeout;
*) ipsec - better flush on proposal change;
*) webfig - show single item groups as optional values;
*) webfig - sort numeric columns numerically even if they contain some text;
*) winbox - added /interface wireless setup-repeater;
*) winbox - added all the rates settings to the capsman;
*) winbox - added flip-screen option to lcd settings;
*) winbox - added missing eap-ttls-mschamv2 method to wireless security profile;
*) winbox - added support for new settings from wireless-rep package;
*) winbox - disable autostart for wireless scan,snooper,align etc. on open;
*) winbox - fixed typo in "echo reply";
*) wireless - fixed crash when ap is in cap mode (introduced in v6.35rc15);
*) pppoe-client - implemented fastpath support;
 
raffav
Member Candidate
Member Candidate
Posts: 291
Joined: Wed Oct 24, 2012 4:40 am

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Mar 04, 2016 5:52 pm

Since the maybe(v34)

this code for sent backup via ftp dont work any more the script broke between the \tool fetch

if i copy the code and past on the terminal

i get the error point
[raffaello@RJ-AT-MK03 - CAP2] >
[raffaello@RJ-AT-MK03 - CAP2] >
[raffaello@RJ-AT-MK03 - CAP2] > /tool fetch address=$ip src-path="$[/system identity get name]_$datetimestring.backup" user=$user password=$pass port=$port upload=ye
s mode=ftp dst-path=($dir."$[/system identity get name]_$datetimestring.backup")
[raffaello@RJ-AT-MK03 - CAP2] > :log info "Sending Backup Mikrotik to FTP Server............."
[raffaello@RJ-AT-MK03 - CAP2] >
[raffaello@RJ-AT-MK03 - CAP2] > /tool fetch address=$ip src-path="$[/system identity get name]_$datetimestring.backup" user=$user password=$pass port=$port upload=ye
status: finished
downloaded: 38KiBg
total: 38KiB-z pause]
duration: 0s

[raffaello@RJ-AT-MK03 - CAP2] > dress=$ip src-path="$[/system identity get name]_$datetimestring.rsc" user=$user password=$pass port=$port upload=yes mode=ftp dst-path=($di
r."$[/system identity get name]_$datetimestring.rsc")


:global thisdate [/system clock get date]

:global datetimestring ([:pick $thisdate 0 3] ."-" . [:pick $thisdate 4 6] ."-" . [:pick $thisdate 7 11])

#IP DO SERVIDOR FTP
:global ip "1.1.1.1"
#SUBDIRETORIO NO SERVIDOR REMOTO FTP
:global dir "/RJ-AT-MK02/"
# PORTA DO FTP
:global port "21"
#USUARIO
:global user "backup"
#SENHA
:global pass "B@ckUp"
log info "Starting Automatic Backup Script Configure By Raffaello"

        

        /system backup save name="$[/system identity get name]_$datetimestring" 
 export file="$[/system identity get name]_$datetimestring" 
   
        :log info "Please wait...!!!"

        :delay 5s

        :log info "Sending Backup Mikrotik to FTP Server............."

        /tool fetch address=$ip src-path="$[/system identity get name]_$datetimestring.backup" user=$user password=$pass port=$port upload=yes mode=ftp dst-path=($dir."$[/system identity get name]_$datetimestring.backup")
       /tool fetch address=$ip  src-path="$[/system identity get name]_$datetimestring.rsc" user=$user password=$pass port=$port upload=yes mode=ftp dst-path=($dir."$[/system identity get name]_$datetimestring.rsc")
        

        :delay 1

        :log info "Finished Backup Script...!!!!"

       :delay 5s

:log info "Deleting backup just created after has sent"
/file remove "$[/system identity get name]_$datetimestring.backup"
/file remove "$[/system identity get name]_$datetimestring.rsc"

 
User avatar
paoloaga
Member Candidate
Member Candidate
Posts: 222
Joined: Tue Mar 08, 2011 2:52 am
Location: Vaprio d'Agogna (NO) - Italy
Contact:

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Mar 04, 2016 5:58 pm

Too many failures in between? :?
What's the point? RC are for testing purposes and it's legit that they introduce bugs/problems and they have the right to build, test, publish, skip any release they want. You should only be happy that we have been given the opportunity to test while they develope so we can help them (and ourselves) having better stable releases.

With RouterOS configurations can be very complex and it's not possible to test every corner case.
 
MTusewk
newbie
Posts: 32
Joined: Sat Nov 15, 2014 1:12 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Mar 04, 2016 7:57 pm

What does the below change mean?

"snmp - fix cpu load reporting to 1min average and change oid to 1.3.6.1.4.1.2021.11.10.0;"

1). Does it mean it is replacing the old Total CPU Load OID 1.3.6.1.4.1.2021.11.52.0?
2). And that earlier it was reporting realtime CPU Load and now this new OID will report 1 min average CPU load?

Kindly please clarify.

Thanks.
 
User avatar
Bigfoot
Frequent Visitor
Frequent Visitor
Posts: 76
Joined: Sat Jan 15, 2011 10:41 am
Location: South Africa

Re: v6.35rc [release candidate] is released, new wireless package!

Sat Mar 05, 2016 12:06 am

Since the maybe(v34)

this code for sent backup via ftp dont work any more the script broke between the \tool fetch

if i copy the code and past on the terminal

i get the error point
[raffaello@RJ-AT-MK03 - CAP2] >
[raffaello@RJ-AT-MK03 - CAP2] >
[raffaello@RJ-AT-MK03 - CAP2] > /tool fetch address=$ip src-path="$[/system identity get name]_$datetimestring.backup" user=$user password=$pass port=$port upload=ye
s mode=ftp dst-path=($dir."$[/system identity get name]_$datetimestring.backup")
[raffaello@RJ-AT-MK03 - CAP2] > :log info "Sending Backup Mikrotik to FTP Server............."
[raffaello@RJ-AT-MK03 - CAP2] >
[raffaello@RJ-AT-MK03 - CAP2] > /tool fetch address=$ip src-path="$[/system identity get name]_$datetimestring.backup" user=$user password=$pass port=$port upload=ye
status: finished
downloaded: 38KiBg
total: 38KiB-z pause]
duration: 0s

[raffaello@RJ-AT-MK03 - CAP2] > dress=$ip src-path="$[/system identity get name]_$datetimestring.rsc" user=$user password=$pass port=$port upload=yes mode=ftp dst-path=($di
r."$[/system identity get name]_$datetimestring.rsc")


:global thisdate [/system clock get date]

:global datetimestring ([:pick $thisdate 0 3] ."-" . [:pick $thisdate 4 6] ."-" . [:pick $thisdate 7 11])

#IP DO SERVIDOR FTP
:global ip "1.1.1.1"
#SUBDIRETORIO NO SERVIDOR REMOTO FTP
:global dir "/RJ-AT-MK02/"
# PORTA DO FTP
:global port "21"
#USUARIO
:global user "backup"
#SENHA
:global pass "B@ckUp"
log info "Starting Automatic Backup Script Configure By Raffaello"

        

        /system backup save name="$[/system identity get name]_$datetimestring" 
 export file="$[/system identity get name]_$datetimestring" 
   
        :log info "Please wait...!!!"

        :delay 5s

        :log info "Sending Backup Mikrotik to FTP Server............."

        /tool fetch address=$ip src-path="$[/system identity get name]_$datetimestring.backup" user=$user password=$pass port=$port upload=yes mode=ftp dst-path=($dir."$[/system identity get name]_$datetimestring.backup")
       /tool fetch address=$ip  src-path="$[/system identity get name]_$datetimestring.rsc" user=$user password=$pass port=$port upload=yes mode=ftp dst-path=($dir."$[/system identity get name]_$datetimestring.rsc")
        

        :delay 1

        :log info "Finished Backup Script...!!!!"

       :delay 5s

:log info "Deleting backup just created after has sent"
/file remove "$[/system identity get name]_$datetimestring.backup"
/file remove "$[/system identity get name]_$datetimestring.rsc"

Hi raffav
I have been using this scrip from V5 and I have had no problem with it.
It looks like the tool fetch does not like your src-path and dst-path parameters.
# automated Um  backup  to External FTP
#File name:Um-FTP-Backup
# Get time
:local routeros [ /system package get number=0 value-name=version ]
:local thistime [/system clock get time]
:set thistime ([:pick $thistime 0 2].[:pick $thistime 3 5].[:pick $thistime 6 8])
# Get Date
:local thisdate [/system clock get date];
:local month
   :set month [:pick $thisdate 0 3]
   :if ($month="jan") do { :set month "01"}
   :if ($month="feb") do { :set month "02"}
   :if ($month="mar") do { :set month "03"}
   :if ($month="apr") do { :set month "04"}
   :if ($month="may") do { :set month "05"}
   :if ($month="jun") do { :set month "06"}
   :if ($month="jul") do { :set month "07"}
   :if ($month="aug") do { :set month "08"}
   :if ($month="sep") do { :set month "09"}
   :if ($month="oct") do { :set month "10"}
   :if ($month="nov") do { :set month "11"}
   :if ($month="dec") do { :set month "12"}

:set thisdate ([:pick $thisdate 7 11]."_".$month."_".[:pick $thisdate 4 6])
# This line to generate the file name for System backup - file name will be User_Manager- ServerName? - Date? - Time?
:local FName ("/User_Manager_".[/system identity get name]."_".$thisdate."_".$thistime."_".$routeros.".umb")

# This line to generate the file name for System backup - file name will be User_Manager- ServerName? - Date? - Time
:local FExport ("/BackUp_".[/system identity get name]."_".$thisdate."_".$thistime."_".$routeros.".rsc")

# This line to generate the file name for System backup - file name will be User_Manager- ServerName? - Date? - Time?
:local FBackup ("/BackUp_".[/system identity get name]."_".$thisdate."_".$thistime."_".$routeros.".backup")
:delay 5s;
/system backup save name=$FBackup;
:delay 5s;
/export file=$FExport
:delay 5s;
/tool user-manager database save name=$FName
:delay 5s;

:log info "Backup File's is Create - $FBackup";
:log info "Export File's is Create - $FExport";
:log info "UM Database Backup File is Create - $FName";
:delay 5s;
:log info "System Backup & Export File's is now been send to FTP Server";

# Upload the System Backup to External FTP - change address to your ftp server + user + pass+upload_path
/tool fetch address="192.168.0.105" user="mikrotik" password="mikrotik" mode=ftp src-path="$FExport" dst-path="/$FExport" upload=yes 
:delay 5s;
# Upload the System Backup to External FTP - change address to your ftp server + user + pass+upload_path
/tool fetch address="192.168.0.105" user="mikrotik" password="mikrotik" mode=ftp src-path="$FBackup" dst-path="/$FBackup" upload=yes
:delay 5s
# Upload the System Backup to External FTP - change address to your ftp server + user + pass+upload_path
/tool fetch address="192.168.0.105" user=mikrotik password=mikrotik mode=ftp src-path="$FName" dst-path="/$FName" upload=yes

:log info message="FTP Sending Backup & Export File's is Finish";
:delay 5s;
:foreach i in=[/file find] do={:if ([:typeof [:find [/file get $i name] "BackUp_"]]!="nil") do={/file remove $i}}
:log info message="SystemBackup & Export File's - Removed";

:foreach i in=[/file find] do={:if ([:typeof [:find [/file get $i name] "User_Manager_"]]!="nil") do={/file remove $i}}
:log info message="User-Manager Database Backup File's - Removed";
 
jondavy
Member Candidate
Member Candidate
Posts: 130
Joined: Tue May 12, 2009 11:14 pm
Location: Brasil

Re: v6.35rc [release candidate] is released, new wireless package!

Sat Mar 05, 2016 4:12 am

please add to the roaming options
roaming-minimum-signal=XX
Roaming minimum-CCQ=XX
(To start the scanning process)
 
raffav
Member Candidate
Member Candidate
Posts: 291
Joined: Wed Oct 24, 2012 4:40 am

Re: v6.35rc [release candidate] is released, new wireless package!

Sun Mar 06, 2016 3:10 am

Since the maybe(v34)

this code for sent backup via ftp dont work any more the script broke between the \tool fetch

if i copy the code and past on the terminal

i get the error point
[raffaello@RJ-AT-MK03 - CAP2] >
[raffaello@RJ-AT-MK03 - CAP2] >
[raffaello@RJ-AT-MK03 - CAP2] > /tool fetch address=$ip src-path="$[/system identity get name]_$datetimestring.backup" user=$user password=$pass port=$port upload=ye
s mode=ftp dst-path=($dir."$[/system identity get name]_$datetimestring.backup")
[raffaello@RJ-AT-MK03 - CAP2] > :log info "Sending Backup Mikrotik to FTP Server............."
[raffaello@RJ-AT-MK03 - CAP2] >
[raffaello@RJ-AT-MK03 - CAP2] > /tool fetch address=$ip src-path="$[/system identity get name]_$datetimestring.backup" user=$user password=$pass port=$port upload=ye
status: finished
downloaded: 38KiBg
total: 38KiB-z pause]
duration: 0s

[raffaello@RJ-AT-MK03 - CAP2] > dress=$ip src-path="$[/system identity get name]_$datetimestring.rsc" user=$user password=$pass port=$port upload=yes mode=ftp dst-path=($di
r."$[/system identity get name]_$datetimestring.rsc")


:global thisdate [/system clock get date]

:global datetimestring ([:pick $thisdate 0 3] ."-" . [:pick $thisdate 4 6] ."-" . [:pick $thisdate 7 11])

#IP DO SERVIDOR FTP
:global ip "1.1.1.1"
#SUBDIRETORIO NO SERVIDOR REMOTO FTP
:global dir "/RJ-AT-MK02/"
# PORTA DO FTP
:global port "21"
#USUARIO
:global user "backup"
#SENHA
:global pass "B@ckUp"
log info "Starting Automatic Backup Script Configure By Raffaello"

        

        /system backup save name="$[/system identity get name]_$datetimestring" 
 export file="$[/system identity get name]_$datetimestring" 
   
        :log info "Please wait...!!!"

        :delay 5s

        :log info "Sending Backup Mikrotik to FTP Server............."

        /tool fetch address=$ip src-path="$[/system identity get name]_$datetimestring.backup" user=$user password=$pass port=$port upload=yes mode=ftp dst-path=($dir."$[/system identity get name]_$datetimestring.backup")
       /tool fetch address=$ip  src-path="$[/system identity get name]_$datetimestring.rsc" user=$user password=$pass port=$port upload=yes mode=ftp dst-path=($dir."$[/system identity get name]_$datetimestring.rsc")
        

        :delay 1

        :log info "Finished Backup Script...!!!!"

       :delay 5s

:log info "Deleting backup just created after has sent"
/file remove "$[/system identity get name]_$datetimestring.backup"
/file remove "$[/system identity get name]_$datetimestring.rsc"

Hi raffav
I have been using this scrip from V5 and I have had no problem with it.
It looks like the tool fetch does not like your src-path and dst-path parameters.
# automated Um  backup  to External FTP
#File name:Um-FTP-Backup
# Get time
:local routeros [ /system package get number=0 value-name=version ]
:local thistime [/system clock get time]
:set thistime ([:pick $thistime 0 2].[:pick $thistime 3 5].[:pick $thistime 6 8])
# Get Date
:local thisdate [/system clock get date];
:local month
   :set month [:pick $thisdate 0 3]
   :if ($month="jan") do { :set month "01"}
   :if ($month="feb") do { :set month "02"}
   :if ($month="mar") do { :set month "03"}
   :if ($month="apr") do { :set month "04"}
   :if ($month="may") do { :set month "05"}
   :if ($month="jun") do { :set month "06"}
   :if ($month="jul") do { :set month "07"}
   :if ($month="aug") do { :set month "08"}
   :if ($month="sep") do { :set month "09"}
   :if ($month="oct") do { :set month "10"}
   :if ($month="nov") do { :set month "11"}
   :if ($month="dec") do { :set month "12"}

:set thisdate ([:pick $thisdate 7 11]."_".$month."_".[:pick $thisdate 4 6])
# This line to generate the file name for System backup - file name will be User_Manager- ServerName? - Date? - Time?
:local FName ("/User_Manager_".[/system identity get name]."_".$thisdate."_".$thistime."_".$routeros.".umb")

# This line to generate the file name for System backup - file name will be User_Manager- ServerName? - Date? - Time
:local FExport ("/BackUp_".[/system identity get name]."_".$thisdate."_".$thistime."_".$routeros.".rsc")

# This line to generate the file name for System backup - file name will be User_Manager- ServerName? - Date? - Time?
:local FBackup ("/BackUp_".[/system identity get name]."_".$thisdate."_".$thistime."_".$routeros.".backup")
:delay 5s;
/system backup save name=$FBackup;
:delay 5s;
/export file=$FExport
:delay 5s;
/tool user-manager database save name=$FName
:delay 5s;

:log info "Backup File's is Create - $FBackup";
:log info "Export File's is Create - $FExport";
:log info "UM Database Backup File is Create - $FName";
:delay 5s;
:log info "System Backup & Export File's is now been send to FTP Server";

# Upload the System Backup to External FTP - change address to your ftp server + user + pass+upload_path
/tool fetch address="192.168.0.105" user="mikrotik" password="mikrotik" mode=ftp src-path="$FExport" dst-path="/$FExport" upload=yes 
:delay 5s;
# Upload the System Backup to External FTP - change address to your ftp server + user + pass+upload_path
/tool fetch address="192.168.0.105" user="mikrotik" password="mikrotik" mode=ftp src-path="$FBackup" dst-path="/$FBackup" upload=yes
:delay 5s
# Upload the System Backup to External FTP - change address to your ftp server + user + pass+upload_path
/tool fetch address="192.168.0.105" user=mikrotik password=mikrotik mode=ftp src-path="$FName" dst-path="/$FName" upload=yes

:log info message="FTP Sending Backup & Export File's is Finish";
:delay 5s;
:foreach i in=[/file find] do={:if ([:typeof [:find [/file get $i name] "BackUp_"]]!="nil") do={/file remove $i}}
:log info message="SystemBackup & Export File's - Removed";

:foreach i in=[/file find] do={:if ([:typeof [:find [/file get $i name] "User_Manager_"]]!="nil") do={/file remove $i}}
:log info message="User-Manager Database Backup File's - Removed";


Thanks
very very strange,
today i run my script again and it worked , no modification had been maded
the strange thing is that the version ROS is the same RC19
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6283
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Mar 07, 2016 3:33 pm

What does the below change mean?

"snmp - fix cpu load reporting to 1min average and change oid to 1.3.6.1.4.1.2021.11.10.0;"

1). Does it mean it is replacing the old Total CPU Load OID 1.3.6.1.4.1.2021.11.52.0?
2). And that earlier it was reporting realtime CPU Load and now this new OID will report 1 min average CPU load?

Kindly please clarify.

Thanks.

1) yes it is replaceing that previous OID as this OID fits the description better for what has to be reported
2) SNMP is not into realtime load reporting as this OID and per core OID require to report 1 minute average load. (as required by RFC or in this case, draft document for the RFC. And following RFC is important so that you as user are not vendor-locked and can use tools that fit your requirements best)
 
n21roadie
Forum Guru
Forum Guru
Posts: 1892
Joined: Fri Aug 07, 2009 10:36 pm
Location: Limerick,Ireland

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Mar 07, 2016 4:12 pm

I don't understand why items listed as new in a RC version are listed again and again in newer RC version
example below is listed in several RC versions as new in this version?
*) pppoe-client - implemented fastpath support;
N21roadie,
Network 100% MT for Now?
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Topic Author
Posts: 6617
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Mar 07, 2016 4:25 pm

n21roadie, when the particular feature gets updated or fixed, changelog entry jumps to the top of change list.
 
User avatar
Alessio Garavano
Member
Member
Posts: 304
Joined: Sat May 29, 2004 12:49 am
Location: Corrientes, Argentina
Contact:

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Mar 07, 2016 5:03 pm

Too many failures in between? :?
What's the point? RC are for testing purposes and it's legit that they introduce bugs/problems and they have the right to build, test, publish, skip any release they want. You should only be happy that we have been given the opportunity to test while they develope so we can help them (and ourselves) having better stable releases.

With RouterOS configurations can be very complex and it's not possible to test every corner case.
Yes yes yes... To much stupid people in the forum only doing bad critics!
Alessio Garavano
http://www.isparg.com.ar
 
sx10
newbie
Posts: 28
Joined: Fri Jan 04, 2013 5:46 am
Location: Portland, OR USA

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Mar 07, 2016 8:41 pm

6.35rc19 has been released!

What's new in 6.35rc19 (2016-Mar-04 11:46):

*) ppp - fixed ppp crash (make it work with Windows clients);
Do you have details on this PPP fix? I've had a mysterious random disconnect issue with windows VPNs since 6.30 or so.
 
scampbell
Trainer
Trainer
Posts: 458
Joined: Thu Jun 22, 2006 5:20 am
Location: Wellington, NZ
Contact:

Re: v6.35rc [release candidate] is released, new wireless package!

Tue Mar 08, 2016 2:01 am

6.35rc19 has been released!
*) winbox - added /interface wireless setup-repeater;
Nice feature !!

When you use this setup repeater button it currently creates a new bridge (called bridge1) and adds WLAN1 plus the new Virtual WLAN into it.

Perhaps this could be modified to ask for a bridge to use (if one is present) or create new and specify name (e.g bridge-repeater) ?

It creates a wlan1-local (actual interface) and wlan1 (virtual interface). It would be nice to have the option to specify better names or perhaps have the virtual I/F called wlan-ap and the physical wlan-station ?

I see it uses station-pseudobridge mode to connect to the prinmary AP which is good if it is non-mikrotik. Does it check to see if it is connecting to a Mikrotik AP to see if it could use station-bridge instead or is this something you need to do manually. I note any Capsman controlled AP's dont yet support bridge mode ?

Good work though Mikrotik :-)
MTCNA, MTCWE, MTCRE, MTCTCE, MTCSE, MTCINE, Trainer
___________________
Mikrotik Distributor - New Zealand
http://www.campbell.co.nz
 
azfar
just joined
Posts: 13
Joined: Tue Dec 29, 2015 1:06 am
Location: Indonesia
Contact:

Bucket Size in HTB

Tue Mar 08, 2016 3:46 pm

very good explanation sir. just add more information please.
i am planing to do a MuM presentation on HTB queue Tree and looking for useful and correct information.
i would really appreciate your help.
regards
Azfar Hameed Khan
Email: azfar.hameed.khan@gmail.com


It is radio to max-limit (0,1 is 10%)

HTB (Hierarchical Token Bucket) is finally getting custom size buckets :)
https://en.wikipedia.org/wiki/Token_bucket

basically this option can eliminate any need for bursts options, and allow much more neat hierarchical structures.
I do not understand how it will work if bucket size is 0 :).

Simple burst behavior can be achieved by use values more that 1. For example if you set bucket-size=4 max-limit=10M - first 40Mb will cross the queue with virtually unlimited speed.

I plan to use this analogy when explainig it in future:
05-animal-driven-waterwheels-are-known-in-murcia-as-norias-de-sangre.jpg
bucket size determines amount of delivered water ( traffic) per take, you cannot control the amount of water in the bucket (it always come full), but you can control number of buckets per second, bigger buckets = smaller number of buckets per second = more burstness of the traffic (and i would imagine less load on CPU)
 
Beone
Member Candidate
Member Candidate
Posts: 243
Joined: Fri Feb 11, 2011 1:11 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Tue Mar 08, 2016 6:05 pm

Can you please add the 2ghz-g/n modus as well in the regular wireless-cm2 package?

We do not want to upgrade to wireless-rep in a production environment but are really needing the functionality to avoid B clients and B rates to massively teardown the wifi performance
 
yottabit
Member Candidate
Member Candidate
Posts: 160
Joined: Thu Feb 21, 2013 5:56 am

Re: v6.35rc [release candidate] is released, new wireless package!

Tue Mar 08, 2016 11:22 pm

Running rc21 just now on rb962 (hAP ac). I started with a blank config and ended up in a boot loop:
  • Changed wlan1 (2 GHz) to station pseudobridge
  • Scanned
  • Chose a network
  • Clicked connect
  • Appeared to start connecting and then the router rebooted and got stuck in a boot loop.
I had to clear the config. After clearing, I tried again and the same thing happened.

Cleared again, and used it to successfully connect to a different network.

Without console access, how can I get a kernel panic message and/or kernel dump? What would you like to see?
 
yottabit
Member Candidate
Member Candidate
Posts: 160
Joined: Thu Feb 21, 2013 5:56 am

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 09, 2016 12:24 am

One suggestion for this release if at all possible, or the very next release: file manipulation in Webfig.

Per this topic from eight years ago, the only way to move files within RouterOS is by using Winbox or by FTP to locahost. I'm fine with that as I enjoy Winbox and use it very often.

However, now that you're reducing the flash capacity of some of these home-targeted devices to 16 MB, and the root file system is a ramdisk, users need an easy way to move files (like config backups) from the ramdisk to the flash/ subdirectory.

Presently this can only be done with Winbox or by using FTP to localhost. Basic and home users will not be using Winbox or FTP, so if there is any way to move the Winbox file dragging feature into Webfig that would be extremely appreciated.

(And hey, if there's a way to add more file manipulation to the CLI too, that would also be great. But Webfig would be the first priority since that's used by more basic users and is platform-agnostic.)

Thanks MikroTik! My order of 23 more rb962/"hAP ac" should arrive at my office tomorrow. :D
 
User avatar
Alessio Garavano
Member
Member
Posts: 304
Joined: Sat May 29, 2004 12:49 am
Location: Corrientes, Argentina
Contact:

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 09, 2016 12:53 am

Hi MT Guys... what is the real advantage of the repeater mode over the WDS mode on same scenery... now i am testing the repeater mode in my home between 2 hAP and can´t see any difference from the prior WDS scenery.

Thanks!
Alessio Garavano
http://www.isparg.com.ar
 
e4sy
just joined
Posts: 3
Joined: Tue Nov 18, 2008 1:15 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 09, 2016 1:04 am

Hi,
Would it be possible to increase the accepted upper limit of the RADIUS client timeout from 10000 ms to 45000-60000 ms ? It would help in implementing RADIUS based 2FA.
 
User avatar
TomjNorthIdaho
Forum Guru
Forum Guru
Posts: 1001
Joined: Mon Oct 04, 2010 11:25 pm
Location: North Idaho
Contact:

6.35rc21 - ugly - took down the whole network !!!

Wed Mar 09, 2016 2:15 am

Today 3/8/2016 I tested 6.35rc21 with the new wireless package on my DynaDish WDS client. That was a mistake.

This took down my network almost everywhere... The problem went through almost all of my other cisco switches and other networks...

My DynaDish was an 802.11 AC 80 MHz wide WDS link in client-Mode , - which was also passing vlan traffic. I could no longer talk to the either DynaDish over wireless or Ethernet.
It also took out the DynaDish WDS AP running 6.34.2 wireless-cm2 . To get back into the WDS AP using my Ethernet connection, we had to face the WDS AP away from the WDS client so that it was no longer registered - then I could get into the WDS AP running the non RC firmware.

So at this time, I have a remote DynaDish WDS client on the RC firmware and I can not get into it using wireless or the Ethernet. The Ethernet does not even show a link.

Good thing I had other alternate links between my two locations.

Has anybody else encountered this ?

North Idaho Tom Jones
 
yottabit
Member Candidate
Member Candidate
Posts: 160
Joined: Thu Feb 21, 2013 5:56 am

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 09, 2016 2:21 am

Connection to non-Mikrotik and still use one radio for station and AP modes simultaneously.
 
User avatar
Alessio Garavano
Member
Member
Posts: 304
Joined: Sat May 29, 2004 12:49 am
Location: Corrientes, Argentina
Contact:

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 09, 2016 2:34 am

Connection to non-Mikrotik and still use one radio for station and AP modes simultaneously.
This i know... but has another advantage over WDS in performance or something connecting 2 RB in repeater mode?
Alessio Garavano
http://www.isparg.com.ar
 
yottabit
Member Candidate
Member Candidate
Posts: 160
Joined: Thu Feb 21, 2013 5:56 am

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 09, 2016 2:55 am

No, probably a disadvantage in performance and/or reliability, actually. Specifically this breaks layer-2 since you can't bridge multiple MAC addresses across station mode per 802.11 spec. So you end up using Station Pseudobridge mode which does a sort of NAT for MAC addresses. WDS avoids all that mess.
 
jondavy
Member Candidate
Member Candidate
Posts: 130
Joined: Tue May 12, 2009 11:14 pm
Location: Brasil

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 09, 2016 3:00 am

please define as default this option in OmniTik and other RouterBards

/interface ethernet poe settings set ether1-poe-in-long-cable=yes

because the outputs PoE outs do not work if not activated this function,
because many find it defective.
 
raffav
Member Candidate
Member Candidate
Posts: 291
Joined: Wed Oct 24, 2012 4:40 am

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 09, 2016 7:50 am

ATTENTION
KERNEL BOOT LOOP ON RC21
On rb433 with wireless rep packege kernel boot,
If wifi-rep disable or switched to wifi-cm2 kernel ok
On crs125 all ok
 
benoga
just joined
Posts: 13
Joined: Wed Mar 09, 2016 7:50 am

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 09, 2016 7:56 am

I use CCR1009 and HAP AC (CapsMan) and have with HAP AC boot loop (6.35.17 and 6.35.21). When i disable CapsMan, then works fine.

(Version 6.35.19 works fine for the HAP AC)

CCR never boot loop, only HAP AC
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 09, 2016 9:37 am

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.

If router goes into reboot loop, then if device has serial port send output of it within text file to support.

If router is rebooting and it does not have serial port, then Netinstall it to older version (With "Keep old configuration" enabled on Netinstall), generate supout file and send it to us.
 
raffav
Member Candidate
Member Candidate
Posts: 291
Joined: Wed Oct 24, 2012 4:40 am

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 09, 2016 1:05 pm

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.

If router goes into reboot loop, then if device has serial port send output of it within text file to support.

If router is rebooting and it does not have serial port, then Netinstall it to older version (With "Keep old configuration" enabled on Netinstall), generate supout file and send it to us.
On my rb433uah after update to rc21 rb was rebooting after 5-10 seconds after system boot normally
In this middle time a was able to login and try to find the cause since in early rc a got the same kernel boot failure I disable de capsman, but not resolved
So i decided to disable the wifi-rep package after some try and ninja moves I finally got the packege to disable and the problem was gone.

The problem is this crashes didn't made autosupport files
And now the crazy
I had decided to turn wifi-rep again
The result no kernel failure :shock: :shock:
How I can sent the support file since now the rb looks ok?
 
notToNew
Member Candidate
Member Candidate
Posts: 148
Joined: Fri Feb 19, 2016 3:15 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 09, 2016 2:09 pm

Had the same on 952Ui-5ac2nD. Downgraded to rc19 and it is stable again.
--------------------------------------------------------------------------------------------
CCR1036-12G-4S, several 952Ui-5ac2nD, ...
 
linek1980
newbie
Posts: 34
Joined: Thu Feb 03, 2011 1:39 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 09, 2016 4:25 pm

RB433AH + wireless-rep-6.35rc21 = KERNEL BOOT LOOP. Rescue : telnet short time between the start and reboot interface wireless disable
 
kristaps
Member Candidate
Member Candidate
Posts: 272
Joined: Mon Jan 27, 2014 1:37 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 09, 2016 5:28 pm

linek1980 what wireless card are you running ?
http://routerboard.com/R52NM aka AR92xxx
or http://routerboard.com/R52H aka AR5xxx
 
raffav
Member Candidate
Member Candidate
Posts: 291
Joined: Wed Oct 24, 2012 4:40 am

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 09, 2016 5:43 pm

i think that the kernel boot loop is related to wifi-rep on the 433 or related to wireless card
because at home i use a 433uah as capsman and there was no cap enable on it and also get the kernel boot
i fallback to wifi-cm2 and the problem is gone, with cap enable
i my case the wifi card is a xr2 on both device
 
uldis
MikroTik Support
MikroTik Support
Posts: 3427
Joined: Mon May 31, 2004 2:55 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 09, 2016 6:04 pm

i think that the kernel boot loop is related to wifi-rep on the 433 or related to wireless card
because at home i use a 433uah as capsman and there was no cap enable on it and also get the kernel boot
i fallback to wifi-cm2 and the problem is gone, with cap enable
i my case the wifi card is a xr2 on both device
Please provide support output file to support@mikrotik.com after you are able to recover the board by disabling the wireless card. That will help us to identify the problem and fix it.
 
yottabit
Member Candidate
Member Candidate
Posts: 160
Joined: Thu Feb 21, 2013 5:56 am

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 09, 2016 6:27 pm

Running rc21 just now on rb962 (hAP ac). I started with a blank config and ended up in a boot loop:
  • Changed wlan1 (2 GHz) to station pseudobridge
  • Scanned
  • Chose a network
  • Clicked connect
  • Appeared to start connecting and then the router rebooted and got stuck in a boot loop.
I had to clear the config. After clearing, I tried again and the same thing happened.

Cleared again, and used it to successfully connect to a different network.

Without console access, how can I get a kernel panic message and/or kernel dump? What would you like to see?
I forgot to note in my post that I was using wireless-rep package.

I don't have access to that router anymore, but when my new ones arrive today I'll reproduce and get a supout.
 
raffav
Member Candidate
Member Candidate
Posts: 291
Joined: Wed Oct 24, 2012 4:40 am

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 09, 2016 7:03 pm

i think that the kernel boot loop is related to wifi-rep on the 433 or related to wireless card
because at home i use a 433uah as capsman and there was no cap enable on it and also get the kernel boot
i fallback to wifi-cm2 and the problem is gone, with cap enable
i my case the wifi card is a xr2 on both device
Please provide support output file to support@mikrotik.com after you are able to recover the board by disabling the wireless card. That will help us to identify the problem and fix it.

i had already sent
Ticket#2016030966000791
 
PeterDoBrasil
Member Candidate
Member Candidate
Posts: 134
Joined: Sun Aug 23, 2015 6:55 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 09, 2016 10:29 pm

v6.35rc21
after upgrade sxt Light lost access to device, device are reboot every 60 seconds, after downgrade to v.6.35rc19 no more problems, I think there is any thing with ether port configuration causing this problem. The unice option to access the device is reset with reset button, and then downgrade to v6.35rc19 :?
 
PeterDoBrasil
Member Candidate
Member Candidate
Posts: 134
Joined: Sun Aug 23, 2015 6:55 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 09, 2016 10:30 pm

v6.35rc21
after upgrade sxt Light lost access to device, device reboots every 60 seconds, after downgrade to v.6.35rc19 no more problems, I think there is any thing with ether port configuration causing this problem. The unice option to access the device is reset with reset button, and then downgrade to v6.35rc19 :?
 
raffav
Member Candidate
Member Candidate
Posts: 291
Joined: Wed Oct 24, 2012 4:40 am

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 09, 2016 10:50 pm

v6.35rc21
after upgrade sxt Light lost access to device, device reboots every 60 seconds, after downgrade to v.6.35rc19 no more problems, I think there is any thing with ether port configuration causing this problem. The unice option to access the device is reset with reset button, and then downgrade to v6.35rc19 :?

disable the wifi-rep and enable the wifi-cm2 and that will work
 
Naurislv
newbie
Posts: 47
Joined: Tue May 06, 2014 11:29 am

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 10, 2016 9:37 am

We have implemented fix which should help with wireless-rep reboot loop. Please test it if you can use rc version on your environment. Fix will be available in RouterOS v6.35rc25.
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 10, 2016 11:32 am

Version 6.35rc25 has been released.

Changes since previous version:

*) tile - fixed rare situation when some cores decide not to take part in packet processing till next reboot;
*) fastpath - fixed crash when packet arrives on disabled interface;
*) capsman - fixed capsman extension channel names;
*) console - fixed print follow in "/ip dns cache" menu
*) ethernet - add option to see S-GPON-ONU module, GPON side SN in "/int eth mon sfp#"
*) ethernet - do not allow to set self as master port;
*) health - always report fan speed (even if it is 0);
*) l2tp - introduced per tunnel allow-fast-path option;
*) webfig - fixed firewall rule sorting did not work in other chains except all;
*) winbox - allow to set multiple dh-groups;
*) winbox - do not show fan statuses in passive cooling CCR1009;
*) winbox - fixed unset options in /routing ospf interface menu;
*) wireless-rep - fix crash on non-HT clients;
*) l2tp - implemented l2tp and lns fastpath/fasttrack support;
*) pppoe-client - implemented fastpath support.

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
mistry7
Forum Guru
Forum Guru
Posts: 1351
Joined: Tue Oct 13, 2009 11:57 am
Location: Germany

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 10, 2016 11:59 am

Version 6.35rc25 has been released.

Changes since previous version:

*) tile - fixed rare situation when some cores decide not to take part in packet processing till next reboot;
*) fastpath - fixed crash when packet arrives on disabled interface;
*) capsman - fixed capsman extension channel names;
*) console - fixed print follow in "/ip dns cache" menu
*) ethernet - add option to see S-GPON-ONU module, GPON side SN in "/int eth mon sfp#"
*) ethernet - do not allow to set self as master port;
*) health - always report fan speed (even if it is 0);
*) l2tp - introduced per tunnel allow-fast-path option;
*) webfig - fixed firewall rule sorting did not work in other chains except all;
*) winbox - allow to set multiple dh-groups;
*) winbox - do not show fan statuses in passive cooling CCR1009;
*) winbox - fixed unset options in /routing ospf interface menu;
*) wireless-rep - fix crash on non-HT clients;
*) l2tp - implemented l2tp and lns fastpath/fasttrack support;
*) pppoe-client - implemented fastpath support.

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.

When i Download and Install 6.35 RC25
My CRS reboot with Kernel Failure
I now use 6.35 RC21
it creates autosupot
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 10, 2016 12:02 pm

mistry7 - Did it actually upgrade? Or did it boot up with rc21?
 
anuser
Member
Member
Posts: 406
Joined: Sat Nov 29, 2014 7:27 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 10, 2016 12:07 pm

Bug or missing feature in new wireless package?

setup: traffic forwarding @CAPSMAN controller:

- with wireless-fp: client receives IPv6 router advertisement, everything works
- with wireless-rep: client doesn´t receive any IPv6 traffic, no RA at all

(I use the same configuration, just disable/enable wireless-fp/wireless-rep package on both CAPSMAN controller and CAP, also tested with 6.35rc25 on x86)
MikroTik ticket: 2016031066000617
Last edited by anuser on Thu Mar 10, 2016 12:46 pm, edited 2 times in total.
 
andriys
Forum Guru
Forum Guru
Posts: 1192
Joined: Thu Nov 24, 2011 1:59 pm
Location: Kharkiv, Ukraine

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 10, 2016 12:34 pm

- with wireless-fp: client receives IPv6 router advertisement, everything works
- with wireless-rep: client doesn´t receive any IPv6 traffic, no RA at all
Have you switch from wireless-fp to wireless-rep on both CAP (access point) and CAPsMAN (controller)? The wireless-fp implements CAPsMAN v1 while wireless-rep implements CAPsMAN v2 and these are not compatible with each other.
 
anuser
Member
Member
Posts: 406
Joined: Sat Nov 29, 2014 7:27 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 10, 2016 12:46 pm

- with wireless-fp: client receives IPv6 router advertisement, everything works
- with wireless-rep: client doesn´t receive any IPv6 traffic, no RA at all
Have you switch from wireless-fp to wireless-rep on both CAP (access point) and CAPsMAN (controller)? The wireless-fp implements CAPsMAN v1 while wireless-rep implements CAPsMAN v2 and these are not compatible with each other.
Yes I did and realized that I made a mistake.

The Problem is: with CAPsMANv2 and „wireless-rep“ package clients don´t receive any IPv6 traffic, no IPv6 router adverisements at all iff VLAN assignement is done dynamically. Dynamic VLAN assignment within datapath works for IPv4 traffic, though. If I assign a VLAN ID wihin datapath configuration of CAPSMAN, IPv6 and IPv4 is working without any problems.

(with traffic forwarding @CAPSMAN controller)

[UPDATE]

+ It works when I change multicast-helper setting to full on the Cap interface
Last edited by anuser on Mon Mar 14, 2016 2:19 pm, edited 2 times in total.
 
mistry7
Forum Guru
Forum Guru
Posts: 1351
Joined: Tue Oct 13, 2009 11:57 am
Location: Germany

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 10, 2016 1:23 pm

mistry7 - Did it actually upgrade? Or did it boot up with rc21?

upgrade
 
mccreigh
just joined
Posts: 8
Joined: Sun Apr 27, 2014 9:01 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 10, 2016 2:38 pm

I installed the v6.35rc21 firmware bundle and matching wireless-rep in a RBmAP-2nD access point (1 Ethernet, 1 2.4GHz wireless). I tried the new wireless repeater mode, which uses the one physical wireless interface as a station virtual interface bridged to an access point virtual interface, and it seems to work.

There's one last bit of wireless-to-wireless functionality in consumer travel routers that should now be possible with RouterOS, but I haven't yet seen how. Consider the "Hotspot mode" of the ASUS WL-330N3G travel router. It implements two virtual wireless interfaces on the same physical interface. On its station virtual interface it has a DHCP client and obtains a single IP address. Its Ethernet physical interface and access point virtual interface bridge onto a LAN with a DHCP server, which NATs through the IP address of the station interface. Its access point virtual interface is generally configured with a different SSID and different link security than its station virtual interface.

This mode lets you create a private encrypted wireless LAN in your hotel room so you can use unencrypted protocols among your wireless devices without worrying about other hotel guests being able to see them, even if the hotel's own guest wireless network is unencrypted.

Can this now be done with RouterOS v6.35 including wireless-rep? If so, could someone please explain how?
 
yottabit
Member Candidate
Member Candidate
Posts: 160
Joined: Thu Feb 21, 2013 5:56 am

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 10, 2016 3:11 pm

Yes it can. Change wlan1 to station pseudobridge, connect it to a Wi-Fi network by using the scan function. (Remember to setup a security profile if needed for Wi-Fi encryption.) Then setup firewall to src NAT that interface. Create a Virtual AP on the same interface. Ensure both wlan1 and the Virtual AP are joined to a bridge interface. Turn on DHCP server. Should be close to finished. I can send you a working config later if you get stuck.
 
blimbach
just joined
Posts: 12
Joined: Fri Mar 04, 2016 3:39 pm
Location: Hennef, Germany

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 10, 2016 4:41 pm

I´ve tried to upgrade my "hap lite" (smips) from rc21 with wireless-rep to rc25 via winbox: System -> Packages.

This doesn´t work with the following error:

ERROR: not enough disk space, 7.7MiB is required and only 7.1 MiB is free.
 
yottabit
Member Candidate
Member Candidate
Posts: 160
Joined: Thu Feb 21, 2013 5:56 am

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 10, 2016 4:44 pm

I´ve tried to upgrade my "hap lite" (smips) from rc21 with wireless-rep to rc25 via winbox: System -> Packages.

This doesn´t work with the following error:

ERROR: not enough disk space, 7.7MiB is required and only 7.1 MiB is free.
Have you tried from a fresh boot (i.e., empty ramdisk)?

If it still doesn't work, can you delete one of the wireless packages you no longer need, e.g., wireless-fp and/or wireless-cm2?
 
blimbach
just joined
Posts: 12
Joined: Fri Mar 04, 2016 3:39 pm
Location: Hennef, Germany

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 10, 2016 4:59 pm

Thank for the hint yottabit, but it doesn´t work.

It says: Can´t uninstall bundled packages (wireless-cm2 / wireless-fp). Also System-Recources tells me that 40MB RAM are free. It´s only a small CAP i´m testing.
 
jarda
Forum Guru
Forum Guru
Posts: 7604
Joined: Mon Oct 22, 2012 4:46 pm

Thu Mar 10, 2016 5:02 pm

Blimbach, you should read from the beginning. Or at least from here...


http://forum.mikrotik.com/viewtopic.php ... 78#p522278
 
Sob
Forum Guru
Forum Guru
Posts: 4855
Joined: Mon Apr 20, 2009 9:11 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 10, 2016 5:27 pm

..., install system package only, ...
Stupid question: Is this specific to smips where packages are smaller and just system one would probably fit in free space (I don't have any smips device myself, so I can't say for sure), or is there a way (without netinstall), how to do it for mipsbe too? I wanted to get rid of combined package on my mAP Lite and free space was only around 5MB, while system package is almost 7MB.
People who quote full posts should be spanked with ethernet cable. Some exceptions for multi-topic threads may apply.
 
nkourtzis
Member Candidate
Member Candidate
Posts: 206
Joined: Tue Dec 11, 2012 12:56 am
Location: Greece

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 10, 2016 5:57 pm

When i Download and Install 6.35 RC25
My CRS reboot with Kernel Failure
I now use 6.35 RC21
it creates autosupot
Same here, upgrading a hEX Lite board from RC19. Upgrade fails. Opened support ticket (#2016031066001081).
Passionate about networks
Enthusiastic about Mikrotik
MTCNA | MTCRE | MTCINE

No trees were killed to send this message,
but a large number of electrons were terribly inconvenienced.
 
mccreigh
just joined
Posts: 8
Joined: Sun Apr 27, 2014 9:01 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 10, 2016 6:19 pm

Yes it can. Change wlan1 to station pseudobridge, connect it to a Wi-Fi network by using the scan function. (Remember to setup a security profile if needed for Wi-Fi encryption.) Then setup firewall to src NAT that interface. Create a Virtual AP on the same interface. Ensure both wlan1 and the Virtual AP are joined to a bridge interface. Turn on DHCP server. Should be close to finished. I can send you a working config later if you get stuck.
I'd really appreciate a working config that I can dig through to understand.

My other problem is finding a sequence of steps to get from the factory-default RBmAPL-n2D WISP AP configuration to one where the (only) Ethernet interface is on the LAN without losing Winbox connectability. (I can always use the magic button to restore the factory-default configuration, but then I'm right back where I started.) Once I'm controlling the router firmly through its Ethernet interface, I should be able to reconfigure the wlan interface without losing control.
 
raffav
Member Candidate
Member Candidate
Posts: 291
Joined: Wed Oct 24, 2012 4:40 am

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 10, 2016 11:03 pm

ATTENTION
RC26
Maybe constant reboot on CHR
verifying if is a isolated case or on all CHR
testing on another CHR
ignore, it was a isolated case !!!
 
mistry7
Forum Guru
Forum Guru
Posts: 1351
Joined: Tue Oct 13, 2009 11:57 am
Location: Germany

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Mar 11, 2016 1:30 pm

mistry7 - Did it actually upgrade? Or did it boot up with rc21?

with RC26 upgrade works
 
raffav
Member Candidate
Member Candidate
Posts: 291
Joined: Wed Oct 24, 2012 4:40 am

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Mar 11, 2016 5:34 pm

I am getting reboot on CHR
12:08:22 system,error,critical router was rebooted without proper shutdown
when CAPMAN is enable on any wifi pack CM2 or REP
 
mccreigh
just joined
Posts: 8
Joined: Sun Apr 27, 2014 9:01 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Mar 11, 2016 7:45 pm

Yes it can. Change wlan1 to station pseudobridge, connect it to a Wi-Fi network by using the scan function. (Remember to setup a security profile if needed for Wi-Fi encryption.) Then setup firewall to src NAT that interface. Create a Virtual AP on the same interface. Ensure both wlan1 and the Virtual AP are joined to a bridge interface. Turn on DHCP server. Should be close to finished. I can send you a working config later if you get stuck.
I'd really appreciate a working config that I can dig through to understand.

My other problem is finding a sequence of steps to get from the factory-default RBmAPL-n2D WISP AP configuration to one where the (only) Ethernet interface is on the LAN without losing Winbox connectability. (I can always use the magic button to restore the factory-default configuration, but then I'm right back where I started.) Once I'm controlling the router firmly through its Ethernet interface, I should be able to reconfigure the wlan interface without losing control.
Recall that we're discussing a RBmAPL-2nD single-Ethernet single-WAN router, where I wanted to use an existing WLAN as my WAN, and NAT-route it to a LAN consisting of an access point (using the same WiFi radio) with a different SSID and the Ethernet. I hoped that RouterOS v6.35 might at last allow me to do that in a single box. It's working now, thanks to yottabit's vital hints. His one hint that confused me a bit was "ensure that wlan1 and the Virtual AP are joined to a bridge interface". I think he meant that ether1 and the Virtual AP should be joined to a bridge interface. If anybody wants the config, I'll post it.
 
PeterDoBrasil
Member Candidate
Member Candidate
Posts: 134
Joined: Sun Aug 23, 2015 6:55 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Sat Mar 12, 2016 2:25 am

We have implemented fix which should help with wireless-rep reboot loop. Please test it if you can use rc version on your environment. Fix will be available in RouterOS v6.35rc25.
Thank you, Iám using v6.35rc26; no more problems! :lol:
 
incahex
just joined
Posts: 5
Joined: Fri Mar 04, 2016 11:05 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Sat Mar 12, 2016 6:09 pm

Rc26
My hex increases the use of mem whitout reason until it hangs. Need to reboot to work again and do the same again.
12 hours more or less until it uses all the memory and need reboot.

No config changes before update. Only from rc 19 to rc 26

Update to include image.
Image
 
PeterDoBrasil
Member Candidate
Member Candidate
Posts: 134
Joined: Sun Aug 23, 2015 6:55 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Sat Mar 12, 2016 8:33 pm

Mikrotik will launch how much rc's to come to final version ???? 30? 40? 50?
 
nkourtzis
Member Candidate
Member Candidate
Posts: 206
Joined: Tue Dec 11, 2012 12:56 am
Location: Greece

Re: v6.35rc [release candidate] is released, new wireless package!

Sat Mar 12, 2016 8:51 pm

Mikrotik will launch how much rc's to come to final version ???? 30? 40? 50?
If the goal is a more stable release, then the more rc's the better. Other companies do the same, the builds are just not publically available; just designated beta testers have access to them.

If you need stability, use the bugfix version.
Passionate about networks
Enthusiastic about Mikrotik
MTCNA | MTCRE | MTCINE

No trees were killed to send this message,
but a large number of electrons were terribly inconvenienced.
 
PeterDoBrasil
Member Candidate
Member Candidate
Posts: 134
Joined: Sun Aug 23, 2015 6:55 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Sat Mar 12, 2016 8:56 pm

Mikrotik will launch how much rc's to come to final version ???? 30? 40? 50?
If the goal is a more stable release, then the more rc's the better. Other companies do the same, the builds are just not publically available; just designated beta testers have access to them.

If you need stability, use the bugfix version.
This was only a question! My prefered update option always is the rc's because there are a lot of good new things!
 
User avatar
kometchtech
Member Candidate
Member Candidate
Posts: 194
Joined: Sat Jun 15, 2013 4:25 am
Location: Japan
Contact:

Re: v6.35rc [release candidate] is released, new wireless package!

Sun Mar 13, 2016 1:59 pm

In rc26, and it has been in CAPsMAN configuration, from the DHCP Server, which is activated in the other RB, has been confirmed a phenomenon in which the IP address is not passed.
Moreover, instead of immediately occur, but after the elapse of a few hours if you are using.

It has not been output, especially something like anxious to log.

If you have enabled local forwarding, it seems this phenomenon is likely to occur.
--
Routerboard Users Group JP
http://www.rb-ug.jp/
CCR1009-8G-1S-1S+, RB750Gr3, CRS226-24G-2S+, RB850Gx2, RB960PGS, CRS317-1G-16S+,
RB2011UAS, CRS125-24G-1S, RB962UiGS-5HacT2HnT, CRS212-1G-10S-1S+, RB3011UiAS
 
m94646602
newbie
Posts: 38
Joined: Thu Oct 03, 2013 5:38 pm

Intel 5300AGN ping loss

Mon Mar 14, 2016 9:16 am

I use 6.35rc26 wireless-rep (AP mode), my laptop (WIN7 INTEL wireless 5300AGN) had a lot of PING loss, when I changed to WIRELESS-CM2, everything is normal.
 
User avatar
omidkosari
Trainer
Trainer
Posts: 617
Joined: Fri Sep 01, 2006 4:18 pm
Location: Iran , Karaj
Contact:

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Mar 14, 2016 10:59 am

Is there any chance to implementation of
http://forum.mikrotik.com/viewtopic.php ... 50#p235456
Umetered Content for PPPoE . 'Unmetered Content' services aren't counted against your monthly download/upload inclusion

http://forum.mikrotik.com/viewtopic.php?t=59745

Mikrotik staff ?
MTCNA , MTCRE, MTCWE, Mikrotik Certified Trainer
 
User avatar
omidkosari
Trainer
Trainer
Posts: 617
Joined: Fri Sep 01, 2006 4:18 pm
Location: Iran , Karaj
Contact:

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Mar 14, 2016 11:03 am

Is there any chance to implementation of
http://forum.mikrotik.com/viewtopic.php ... 50#p235456
Umetered Content for PPPoE . 'Unmetered Content' services aren't counted against your monthly download/upload inclusion

http://forum.mikrotik.com/viewtopic.php?t=59745

Mikrotik staff ?
http://www.cisco.com/c/en/us/products/i ... index.html
MTCNA , MTCRE, MTCWE, Mikrotik Certified Trainer
 
uldis
MikroTik Support
MikroTik Support
Posts: 3427
Joined: Mon May 31, 2004 2:55 pm

Re: Intel 5300AGN ping loss

Mon Mar 14, 2016 11:06 am

I use 6.35rc26 wireless-rep (AP mode), my laptop (WIN7 INTEL wireless 5300AGN) had a lot of PING loss, when I changed to WIRELESS-CM2, everything is normal.
Please contact support@mikrotik.com and attach a support output file which is made when you have the ping loss.
 
uldis
MikroTik Support
MikroTik Support
Posts: 3427
Joined: Mon May 31, 2004 2:55 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Mar 14, 2016 11:09 am

Please make a support output file after the reboot and then another file when you see that the board has taken a lot of memory - this will help us to identify what causes the memory usage.
Send both files to support@mikrotik.com
Rc26
My hex increases the use of mem whitout reason until it hangs. Need to reboot to work again and do the same again.
12 hours more or less until it uses all the memory and need reboot.

No config changes before update. Only from rc 19 to rc 26

Update to include image.
Image
 
uldis
MikroTik Support
MikroTik Support
Posts: 3427
Joined: Mon May 31, 2004 2:55 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Mar 14, 2016 11:12 am

In rc26, and it has been in CAPsMAN configuration, from the DHCP Server, which is activated in the other RB, has been confirmed a phenomenon in which the IP address is not passed.
Moreover, instead of immediately occur, but after the elapse of a few hours if you are using.

It has not been output, especially something like anxious to log.

If you have enabled local forwarding, it seems this phenomenon is likely to occur.
Please provide more detailed info on the problem. What RouterOS version and wireless package you had were this all was working fine?
What setup you have on the CAPsMAN and the CAP?
Please send the support output files and also information how to reproduce this problem to support@mikrotik.com
 
User avatar
kometchtech
Member Candidate
Member Candidate
Posts: 194
Joined: Sat Jun 15, 2013 4:25 am
Location: Japan
Contact:

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Mar 14, 2016 11:48 am

In rc26, and it has been in CAPsMAN configuration, from the DHCP Server, which is activated in the other RB, has been confirmed a phenomenon in which the IP address is not passed.
Moreover, instead of immediately occur, but after the elapse of a few hours if you are using.

It has not been output, especially something like anxious to log.

If you have enabled local forwarding, it seems this phenomenon is likely to occur.
Please provide more detailed info on the problem. What RouterOS version and wireless package you had were this all was working fine?
What setup you have on the CAPsMAN and the CAP?
Please send the support output files and also information how to reproduce this problem to support@mikrotik.com
Hello, uldis.

I have to be reported in the following ticket.

[Ticket#2016031466000342]
--
Routerboard Users Group JP
http://www.rb-ug.jp/
CCR1009-8G-1S-1S+, RB750Gr3, CRS226-24G-2S+, RB850Gx2, RB960PGS, CRS317-1G-16S+,
RB2011UAS, CRS125-24G-1S, RB962UiGS-5HacT2HnT, CRS212-1G-10S-1S+, RB3011UiAS
 
User avatar
MAYAKNET
newbie
Posts: 26
Joined: Wed Mar 12, 2014 10:16 pm
Contact:

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Mar 14, 2016 12:07 pm

Доброго дня Всем.

1. Очень серьёзная проблема, не могу от версии что обновился на 6.35rc19 ни дальше обновиться ни откатится назад. Пытался через НЕТИНСТАЛЛ 6.35.3 - не получилось. Не видит НЕТИНСТАЛЛ Микротик в состоянии BOOT

2. Около 2-х месяцев проблема с 2-йными сессиями в Микротик, во вложении скриншот. Авторизация у нас PPPoE через РАДИУС. Порой 2-х сессий так много, приходится по 2-3 раза в день перезагружать Микротик.



Problem001.jpg
You do not have the required permissions to view the files attached to this post.
 
Siona
Frequent Visitor
Frequent Visitor
Posts: 83
Joined: Thu Jan 29, 2015 11:56 am

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Mar 14, 2016 1:50 pm

Доброго дня Всем.

1. Очень серьёзная проблема, не могу от версии что обновился на 6.35rc19 ни дальше обновиться ни откатится назад. Пытался через НЕТИНСТАЛЛ 6.35.3 - не получилось. Не видит НЕТИНСТАЛЛ Микротик в состоянии BOOT

2. Около 2-х месяцев проблема с 2-йными сессиями в Микротик, во вложении скриншот. Авторизация у нас PPPoE через РАДИУС. Порой 2-х сессий так много, приходится по 2-3 раза в день перезагружать Микротик.



Problem001.jpg
English please
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Mar 14, 2016 1:59 pm

Version 6.35rc28 has been released.

Changes since previous version:
*) l2tp - implemented l2tp and lns fastpath/fasttrack support;
*) pppoe-client - implemented fastpath support;
*) console - allow unknown scan-list names on wireless configuration to fix import;
*) console - sort completions/hints in natural order;
*) health - swap fan2 and fan3 on CCR1072;
*) ipsec - take into account ip protocol in kernel policy matcher;
*) led - turn on fault led on CCR1072 if CPU too hot;
*) lte - changed AT command processing;
*) mac-winbox - try to aggregate packets & resend all pending packets on timeout;
*) ppp - do not crash when received multiple CBCP packets;
*) winbox - correctly recognise if there is need to report fan information uder system health;
*) winbox - do not use area v2 names instead of ospf v3 area names;
*) winbox - make additional-network-mode optional for lte interface;
*) winbox - make mac-winbox work with RB850;
*) wireless - fix crash on nstreme-dual interface stats update.

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
incahex
just joined
Posts: 5
Joined: Fri Mar 04, 2016 11:05 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Mar 14, 2016 2:46 pm

Please make a support output file after the reboot and then another file when you see that the board has taken a lot of memory - this will help us to identify what causes the memory usage.
Send both files to support@mikrotik.com
Rc26
My hex increases the use of mem whitout reason until it hangs. Need to reboot to work again and do the same again.
12 hours more or less until it uses all the memory and need reboot.

No config changes before update. Only from rc 19 to rc 26

Update to include image.
Image
Sorry I downgrade to 6.34.3 and now all is ok.
I will wait for new RC to try upgrade in a future.
 
amokkatmt
newbie
Posts: 30
Joined: Mon Oct 24, 2011 3:31 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Mar 14, 2016 3:13 pm

This issue with memory started for me on rc25. I have RB750GL.
Already upgraded to rc28. If issue reoccur, will try to make Supout.
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Mar 14, 2016 3:31 pm

incahex, amokkatmt - Do you have some kind of tunnels on your devices? For example, L2TP and/or PPPoE?
 
User avatar
MAYAKNET
newbie
Posts: 26
Joined: Wed Mar 12, 2014 10:16 pm
Contact:

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Mar 14, 2016 3:59 pm

Доброго дня Всем.

1. Очень серьёзная проблема, не могу от версии что обновился на 6.35rc19 ни дальше обновиться ни откатится назад. Пытался через НЕТИНСТАЛЛ 6.35.3 - не получилось. Не видит НЕТИНСТАЛЛ Микротик в состоянии BOOT

2. Около 2-х месяцев проблема с 2-йными сессиями в Микротик, во вложении скриншот. Авторизация у нас PPPoE через РАДИУС. Порой 2-х сессий так много, приходится по 2-3 раза в день перезагружать Микротик.



Problem001.jpg
English please

Good day everyone.

1. Very serious problem, I can not from the version that was updated on 6.35rc19 no further update or rollback. Tried through NETINSTALL 6.35.3 - it did not work. He does not see NETINSTALL Mikrotik able BOOT

2. About 2 months is a problem with 2-ynymi sessions in Mikrotik, screenshot as an attachment. Authorization we PPPoE via RADIUS. Sometimes 2 sessions so much, we have 2-3 times a day to restart the Mikrotik.
Problem001.jpg
You do not have the required permissions to view the files attached to this post.
 
amokkatmt
newbie
Posts: 30
Joined: Mon Oct 24, 2011 3:31 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Mar 14, 2016 4:08 pm

incahex, amokkatmt - Do you have some kind of tunnels on your devices? For example, L2TP and/or PPPoE?
I have 1 PPPoE outgoing, 2 L2TP outg., 1 PPTP incoming running almost all the time.
Now waiting:
graph_image.php.png
uptime 1.5 hours.
Few last days:
graph_image2.php.png
You do not have the required permissions to view the files attached to this post.
 
amokkatmt
newbie
Posts: 30
Joined: Mon Oct 24, 2011 3:31 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Mar 14, 2016 4:27 pm

Good day everyone.

1. Very serious problem, I can not from the version that was updated on 6.35rc19 no further update or rollback. Tried through NETINSTALL 6.35.3 - it did not work. He does not see NETINSTALL Mikrotik able BOOT

2. About 2 months is a problem with 2-ynymi sessions in Mikrotik, screenshot as an attachment. Authorization we PPPoE via RADIUS. Sometimes 2 sessions so much, we have 2-3 times a day to restart the Mikrotik.
Problem001.jpg
Also have this issue on CCR1036-12G-4S.
Our real 800 pppoe clients turned into 2400 pppoe sessions with "kernel failure" random reboots and fail to up/down grade RouterOS. But netinstall worked for me. CCR just "kernel failure" and rebooting instead of flashing ROS. Same with restoring backups - "kernel failure". I have 3 supouts, 2 auto, and 1 created manually when uptime was 5 minutes. Where should I send this?
 
User avatar
MAYAKNET
newbie
Posts: 26
Joined: Wed Mar 12, 2014 10:16 pm
Contact:

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Mar 14, 2016 7:19 pm

Good day everyone.

1. Very serious problem, I can not from the version that was updated on 6.35rc19 no further update or rollback. Tried through NETINSTALL 6.35.3 - it did not work. He does not see NETINSTALL Mikrotik able BOOT

2. About 2 months is a problem with 2-ynymi sessions in Mikrotik, screenshot as an attachment. Authorization we PPPoE via RADIUS. Sometimes 2 sessions so much, we have 2-3 times a day to restart the Mikrotik.
Problem001.jpg
Also have this issue on CCR1036-12G-4S.
Our real 800 pppoe clients turned into 2400 pppoe sessions with "kernel failure" random reboots and fail to up/down grade RouterOS. But netinstall worked for me. CCR just "kernel failure" and rebooting instead of flashing ROS. Same with restoring backups - "kernel failure". I have 3 supouts, 2 auto, and 1 created manually when uptime was 5 minutes. Where should I send this?



And Mikrotik CCR1036-12G-4S and Mikrotik CCR1016-12S-1S + I have them more reached the 10 pieces, and all this problem.
 
incahex
just joined
Posts: 5
Joined: Fri Mar 04, 2016 11:05 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Tue Mar 15, 2016 2:24 am

incahex, amokkatmt - Do you have some kind of tunnels on your devices? For example, L2TP and/or PPPoE?
I have a pppoe client for the wan connection.
Also I have a pppt server configured for my private use as tunnel when I use plublic hotel wifis. But normaly is not in use.

I update to RC28 and is also the same problem. Memory use increases whitout reason.

I will send you a support file before and after do reset right now.
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Tue Mar 15, 2016 8:25 am

We are currently working on fixes for PPP problems. Please wait for upcoming release candidate versions which will include fixes for problems introduced in latest 6.35rc versions.
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Tue Mar 15, 2016 9:30 am

Version 6.35rc29 has been released.

Changes since previous version:
*) RB3011 - fixed time keeping

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1825
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: v6.35rc [release candidate] is released, new wireless package!

Tue Mar 15, 2016 9:51 am

Version 6.35rc29 has been released.

Changes since previous version:
*) RB3011 - fixed time keeping
Thanks Mikrotik support and developers.
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
RyperX
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Thu May 21, 2015 11:14 am

Re: v6.35rc [release candidate] is released, new wireless package!

Tue Mar 15, 2016 1:39 pm

I have wireless problems since 6.35rc28, didnt changed any config about that

Image

Has anybody else these problems?
 
uldis
MikroTik Support
MikroTik Support
Posts: 3427
Joined: Mon May 31, 2004 2:55 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Tue Mar 15, 2016 5:44 pm

I have wireless problems since 6.35rc28, didnt changed any config about that

Image

Has anybody else these problems?
With what wireless package you see this problem?
What configuration you have on the wireless and what wireless encryption you have enabled?
What is your wireless client hardware?
 
incahex
just joined
Posts: 5
Joined: Fri Mar 04, 2016 11:05 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Tue Mar 15, 2016 8:00 pm

Not urgent but could you also update de RouterBOOT changelog in the wiki.
http://wiki.mikrotik.com/wiki/RouterBOOT_changelog
actual routerboot is 3.31 in mi hex and changelog wiki is still in 3.28

Thanks
 
RyperX
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Thu May 21, 2015 11:14 am

Re: v6.35rc [release candidate] is released, new wireless package!

Tue Mar 15, 2016 8:30 pm

I have wireless problems since 6.35rc28, didnt changed any config about that

Image

Has anybody else these problems?
With what wireless package you see this problem?
What configuration you have on the wireless and what wireless encryption you have enabled?
What is your wireless client hardware?
Thanks for respone but i have to apology ;)
It wasnt the fault of the router or OS, one of my devices had a broken wifi chip.
 
darkprocess
Member Candidate
Member Candidate
Posts: 253
Joined: Fri Mar 20, 2015 1:16 pm

v6.35rc [release candidate] is released, new wireless package!

Tue Mar 15, 2016 9:32 pm

I've also those errors with my laptop with the rep package. Deconnections every 5 mn in average. Using the router as a repeater
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 16, 2016 10:41 am

Version 6.35rc30 has been released!

Changes since previous version:

*) ethernet - fixed Netmetal, QRT, DynaDish, SXT ac linking at 10/100Mbps (introduced in 6.35rc);
*) firewall - added experimental "action=route" in mangle prerouting - that forces packets to specific gateway by ignoring routing decisions (CLI only);
*) l2tp - fixed small memory leak on reconnects;
*) pppoe - make fast path receive work on tile, arm and x86;
*) proxy - fix ftp request url decode;
*) tile - fixed fast path related memory leak.

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
i4jordan
Frequent Visitor
Frequent Visitor
Posts: 75
Joined: Mon Sep 02, 2013 1:42 am

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 16, 2016 10:46 am

Strange behaviour of a RB3011 with v6.35.RC28
It sometimes reports very high and strange interface usage:
[img]
RB3011-high-interface-usage.jpg
[/img]

eth6 is connected to a LTE router (max.150/150Mbps)
eth7 is connected to a ADSL2 router (max. 10/1 Mbps)
eth8 is connected to a ADSL2 router (max. 10/1 Mbps)
You do not have the required permissions to view the files attached to this post.
Last edited by i4jordan on Fri Mar 18, 2016 3:46 pm, edited 1 time in total.
 
User avatar
docmarius
Forum Guru
Forum Guru
Posts: 1220
Joined: Sat Nov 06, 2010 12:04 pm
Location: Timisoara, Romania
Contact:

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 16, 2016 12:40 pm

*) firewall - added experimental "action=route" in mangle prerouting - that forces packets to specific gateway by ignoring routing decisions (CLI only);
Now this is a nice addition. I assume it also initiates connection tracking for reverse path...
Torturing CCR1009-7G-1C-1S+, RB450G, RB750GL, RB951G-2HnD, RB960PGS, RB260GSP, OmniTIK 5HnD and NetMetal 922UAGS-5HPacD + R11e-5HnD in my home network.
 
User avatar
mjs
just joined
Posts: 2
Joined: Tue Jun 16, 2015 11:34 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 16, 2016 10:45 pm

I'm running 6.35.rc30 on RB3011 I have been getting these errors for sometime now, they go away if I back-grade to 6.34.3.
Capture.JPG
You do not have the required permissions to view the files attached to this post.
 
KentornoS
just joined
Posts: 8
Joined: Tue Aug 18, 2009 4:38 pm
Location: Ukraine, Kirovograd
Contact:

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 17, 2016 12:46 am

Hello everyone, found bug with radius - Acct-Input-Octets always equal to 54 bytes:
radbug2.png
Here is session history from freeradius db:
radbug1.png
sessions are shown in desc order (newest on the top). Were used 6.35rc15, then downgraded to 6.34.3, then upgraded to 6.35rc30. As I can see, problem still exists in 6.35rc30, but all works perfect on 6.34.3.
Devices were used:

RB750UP r2 - 3 pcs
RB750
RB911G-5HPnD

Problem exists on all devices.
You do not have the required permissions to view the files attached to this post.
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 17, 2016 11:43 am

Version 6.35rc31 has been released.

Changes since previous version:
*) fasttrack - fixed timer updating in connections table for fasttrack connections;
*) ppp - fixed crash when ppp interface gets disconnected and user gets authenticated at the same time (most probable with slow RADIUS server);
*) ppp - fixed memory leak high number of pppoe clients to the same server;
*) route - fix filter by routing table;
*) winbox - allow to set additional-network-modes;
*) winbox - allow to show revoked & authority flags at the same time;
*) winbox - do not show "enable-jumper-reset" setting on devices without serial port;
*) winbox - do not show real-tx-power column in current-tx-power by default;

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
User avatar
Cha0s
Forum Veteran
Forum Veteran
Posts: 913
Joined: Tue Oct 11, 2005 4:53 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 17, 2016 5:44 pm

After upgrading mAP Lite to 6.35rc31 from 6.34.2 the clock is off by ~1.8seconds every 15minutes.
map-lite-clock-drift2.png
I don't know if that was the case before or if it's a new bug but now that SNTP will log the time change it floods the logs with messages like
map-lite-clock-drift.png
You do not have the required permissions to view the files attached to this post.
 
User avatar
juanvi
Member Candidate
Member Candidate
Posts: 164
Joined: Mon May 05, 2014 6:55 pm
Location: SPAIN

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 17, 2016 5:52 pm

Happened here too with rc29 in x86 but stopped after a day. Normal behavior?
NTP SERVERS: 150.214.94.5 - 176.31.53.99
¡vʞvdnX puv ···SOɹǝʇnoɹ ʞıʇoɹʞıW oʇ sʞuvHʇ
 
User avatar
Cha0s
Forum Veteran
Forum Veteran
Posts: 913
Joined: Tue Oct 11, 2005 4:53 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Mar 18, 2016 12:24 pm

Happened here too with rc29 in x86 but stopped after a day. Normal behavior?
NTP SERVERS: 150.214.94.5 - 176.31.53.99
Probably not related with the problem on mAP Lite.

I just checked numerous devices with various versions and only mAP Lite does not keep time properly consistently.

It's always faster by 1.8seconds every 15minutes. I tripled checked it on 3 different mAP Lite devices (with 3 different versions of routeros - so the problem seems to always have existed on this device)

The following devices which I have available here at the moment do not show any problems with time keeping (max offset is ~ 18ms, min offset is a few μs)

RB433AH - MIPSBE (2 of them)
SEXTANT G - MIPSBE (2 of them)
SXT 5HPnD - MIPSBE (2 of them)
Groove A-52HPn - MIPSBE (2 of them)
2011UAS-2HnD - MIPSBE
hAP Lite - SMIPS (2 of them)
CCR1036-8G-2S+ - TILE (2 of them)
RB850Gx2 - PPC
RB3011 - ARM (OK as of v6.35rc29)
x86 (ESXi VM)
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Mar 18, 2016 12:38 pm

Version 6.35rc32 has been released.

Changes since previous version:
*) bonding - fix crash on bonding slave release;
*) hotspot - fix possible deadlock;
*) l2tp - fixed kernel failure (introduced in 6.35rc);
*) snmp - fix getbulk result ordering with multiple request OIDs;
*) winbox - make mrru disabled and set mtu+mru to auto by default on new servers

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
notToNew
Member Candidate
Member Candidate
Posts: 148
Joined: Fri Feb 19, 2016 3:15 pm

Re: Intel 5300AGN ping loss

Fri Mar 18, 2016 12:47 pm

I use 6.35rc26 wireless-rep (AP mode), my laptop (WIN7 INTEL wireless 5300AGN) had a lot of PING loss, when I changed to WIRELESS-CM2, everything is normal.
Can reproduce this with 6.35rc31 on Basebox2. Switched back to WIRELESS-CM2 as well.
--------------------------------------------------------------------------------------------
CCR1036-12G-4S, several 952Ui-5ac2nD, ...
 
ohitz
just joined
Posts: 12
Joined: Wed Feb 24, 2016 5:12 pm
Location: Fribourg, Switzerland

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Mar 18, 2016 1:21 pm

*) snmp - fix getbulk result ordering with multiple request OIDs;
Excellent! I confirm this works, you can therefore close Ticket#2016030366000916.

Thanks,
Oliver
 
jondavy
Member Candidate
Member Candidate
Posts: 130
Joined: Tue May 12, 2009 11:14 pm
Location: Brasil

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Mar 18, 2016 1:31 pm

dns cache stop work after some time
on RB2011UiAS with 6.35rc32
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Mar 18, 2016 1:34 pm

Version 6.35rc33 has been released.

Changes since previous version:
*) bonding - fix crash on bonding slave release;
*) lte - changed AT parsing because supported Huawei modems use unsolicit events instead of polling

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
Florian
Frequent Visitor
Frequent Visitor
Posts: 67
Joined: Sun Mar 13, 2016 9:45 am
Location: France

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Mar 18, 2016 3:00 pm

(Damn you're on fire today)
- Sorry for my english -
 
User avatar
SiB
Member Candidate
Member Candidate
Posts: 213
Joined: Sun Jan 06, 2013 11:19 pm
Location: Poland

Re: v6.35rc [release candidate] is released, new wireless package!

Sat Mar 19, 2016 1:28 am

Please add working 'Ctrl+F' at start of WinBox. I must always click on any managed or neighbors RB first.
MTCNA + MTCRE + MTCINE | ~600 users at ~150 RouterBoards in EMEA | Telegram: @SiB_PL | WebChat: Tokonda
WinBox Tip: F6 works as ALT+TAB | Gliffy.com - free network schematic | prnt.sc - free ScreenShot software
 
raffav
Member Candidate
Member Candidate
Posts: 291
Joined: Wed Oct 24, 2012 4:40 am

Re: v6.35rc [release candidate] is released, new wireless package!

Sat Mar 19, 2016 1:46 am

Hello
can any one have any clue what about this error
Untitled.png
You do not have the required permissions to view the files attached to this post.
 
Beone
Member Candidate
Member Candidate
Posts: 243
Joined: Fri Feb 11, 2011 1:11 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Sat Mar 19, 2016 3:47 pm

flashing haps with netinstall 6.34.3 and 6.34.3 packages doesn't work.

Trying to flash haps with netinstall 5.26 and 6.34.3 packages however does work.
 
anuser
Member
Member
Posts: 406
Joined: Sat Nov 29, 2014 7:27 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Sun Mar 20, 2016 11:20 am

I have a kind of small feature request for wireless-rep package:
- Can you add the user name that is used by the wifi clients to CAPsMAN view?
 
Njumaen
newbie
Posts: 37
Joined: Wed Feb 24, 2016 8:41 pm

Re: v6.35rc [release candidate] is released, new wireless package! Small feature request

Sun Mar 20, 2016 2:06 pm

Another small feature request: possibility to disable/enable single CAPsMAN's configurations

Thanks,

Ralf.
Last edited by Njumaen on Mon Mar 21, 2016 10:28 am, edited 1 time in total.
 
RafGan
newbie
Posts: 29
Joined: Mon Jun 06, 2011 6:17 pm
Location: Poland / Silesia

Re: Intel 5300AGN ping loss

Sun Mar 20, 2016 11:36 pm

I use 6.35rc26 wireless-rep (AP mode), my laptop (WIN7 INTEL wireless 5300AGN) had a lot of PING loss, when I changed to WIRELESS-CM2, everything is normal.
Can reproduce this with 6.35rc31 on Basebox2. Switched back to WIRELESS-CM2 as well.


I can confirm this issue. Two laptops Le... WiFi cards this same of type (first Win7, second Vista), 4 diffrents RBs and one this same problem (2,4GHz and 5GHz). Atheros card at the same time works fine on all of used RBs. Tested on rc33.

Regards, RafG.


Right now my daughter is telling me, that on her S6 is this same problem - I can confirm this, for sure, tomorrow.
Best Regards,
Raf G
 
Siona
Frequent Visitor
Frequent Visitor
Posts: 83
Joined: Thu Jan 29, 2015 11:56 am

Mon Mar 21, 2016 12:03 am

I have similar problem. On dual band AP (capsman) I have massive data loss on 5ghz. After switching 5g off everything works fine. Rc33, hap ac.

Edit
problem still persist in 2.4 but not so often.
 
whitbread
Member Candidate
Member Candidate
Posts: 108
Joined: Fri Nov 08, 2013 9:55 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Mar 21, 2016 9:58 am

My RB951UI constantly reboots every 10 to 11 hrs (watchdog enabled) due to lost connection to RB951G connected directly via ethernet. Both on RC32. No memory or cpu issue according to graphs. supout sent.
 
hedele
Member
Member
Posts: 338
Joined: Tue Feb 24, 2009 11:23 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Mar 21, 2016 11:00 am

Version 6.35rc33 has been released.

*) lte - changed AT parsing because supported Huawei modems use unsolicit events instead of polling
I hoped that this might fix Ticket#2016031766000471 but unfortunately this just made it worse to the point that AT+CPIN? commands on the Huawei ME909s time out all the time, rendering the modem unusable as it is stuck in an initialization sequence loop. If I usb power-reset the modem, I get a response to AT+CPIN? once, but then the communication hangs at AT+CMEE=1 . I'll send in a supout.rif as well.
 
Quindor
Member
Member
Posts: 347
Joined: Tue Aug 14, 2012 2:57 am
Location: Noord-Brabant, The Netherlands
Contact:

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Mar 21, 2016 11:18 am

I too am having wireless client issues since running 6.35rc33. Using a hAP AC in CAPsMAN mode and my clients keep loosing their connection to the network, connection stays up, but not traffic locally or to internet possible anymore. Reconnect of the wireless link immediately solves it. Running 6.35rc22 before this all worked perfectly well.

In my CAPsMAN logs I see the following:
XX:XX:XX:XX:XX:XX@Access-point_1_1 disconnected, received death: unspecified (1)

It seems to mostly happen to my Intel N wireless laptop
Last edited by Quindor on Mon Mar 21, 2016 5:04 pm, edited 1 time in total.
http://www.campzone.nl World's Largest Outdoor LANParty, http://intermit.tech Intermittend Technology blog, My blog about the ESP8266, IP Camera's and other tech related subjects!
 
ivicask
Member Candidate
Member Candidate
Posts: 243
Joined: Tue Jul 07, 2015 2:40 pm
Location: Croatia, Zagreb

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Mar 21, 2016 11:30 am

I too am having wireless client issues since running 6.35rc33. Using a hAP AC in CAPsMAN mode and my clients keep loosing their connection to the network, connection stays up, but not traffic locally or to internet possible anymore. Reconnect of the wireless link immediately solves it. Running 6.35rc22 before this all worked perfectly well.
I have the same issue on Metal 2SHPn, running regular AP without CAPsMAN, all traffic simple stops, i cant even acces AP i get connection refused, turning on off wireless on my HTC phone fixes it, i was thinking its my phone issue..will get logs next time from router when it happens.
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Mar 21, 2016 11:59 am

KentornoS - Your problem will be solved within RouterOS starting from 6.35rc34 version
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Mar 21, 2016 12:21 pm

Version 6.35rc34 has been released.

Changes since previous version:
*) capsman - added 802.11g/n band;
*) chr - added support for VLAN on Hyper-V;
*) hotspot - fix possible deadlock;
*) hotspot - improved html page resistance against attacks;
*) l2tp & pppoe - fixed user traffic accounting when fastpath was used;
*) pppoe - fixed crash when removing <l2tp> pppoe service;
*) winbox - added init-delay option to routerboard settings;
*) winbox - added sfp-mac for GPON interfaces;
*) winbox - added support for route action in mangle rules;

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
heydude
newbie
Posts: 26
Joined: Wed Dec 02, 2015 4:53 pm
Location: CH

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Mar 21, 2016 12:40 pm

Hi,
I just loaded the newest rc Release on our Test equippment (6.35rc33).
-Central router (PC with x86 Router OS), acts as CAPsMAN Manager
-CAP (Groove A-52HPn) controlled by CAPsMAN
-Client (Groove 52HPn) set in station mode as client

First I tryied to test all available frequency modes on the AP without CAPsMAN.
2.4GHz-B/G/N and 5GHz-A/N are both working fine.

If I enable the CAPsMAN control on the AP, it successfully gets all settings from the central router.
The 2.4GHz-B/G/N mode is still working fine with CAPsMAN
If I try to set 5GHz-A/N mode in the CAPsMAN profile, the AP gets the settings and looks ok, but the client can not find any 5GHz network.

Why 5GHz is working in standalone AP mode and not if controlled by CAPsMAN?
You do not have the required permissions to view the files attached to this post.
 
uldis
MikroTik Support
MikroTik Support
Posts: 3427
Joined: Mon May 31, 2004 2:55 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Mar 21, 2016 1:09 pm

heydude, what country setting you have specified in the CAPsMAN configuration as it selected 5740mhz as a center channel?
 
uldis
MikroTik Support
MikroTik Support
Posts: 3427
Joined: Mon May 31, 2004 2:55 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Mar 21, 2016 1:13 pm

Hello
can any one have any clue what about this error
Untitled.png
It looks like the connection before the CAPsMAN and CAP was lost and CAP initiated a new connection to the CAPsMAN.
 
heydude
newbie
Posts: 26
Joined: Wed Dec 02, 2015 4:53 pm
Location: CH

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Mar 21, 2016 2:11 pm

heydude, what country setting you have specified in the CAPsMAN configuration as it selected 5740mhz as a center channel?
Thanks for the tip. The country setting is really the problem. In the configuration I set it to Switzerland. So, strangely it selects 5740MHz as center channel, which is not allowed. If I set country to Germany it selects something like 5180, then it works fine. So, there might be a frequency table problem in the country settings.
Hope this will be fixed soon...
 
raffav
Member Candidate
Member Candidate
Posts: 291
Joined: Wed Oct 24, 2012 4:40 am

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Mar 21, 2016 4:12 pm

) winbox - added support for route action in mangle rules;
what is the usage of this new action ?
like a round-map on Cisco ?
 
User avatar
juanvi
Member Candidate
Member Candidate
Posts: 164
Joined: Mon May 05, 2014 6:55 pm
Location: SPAIN

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Mar 21, 2016 7:40 pm

Cant' find:
Version 6.35rc34 has been released.

Changes since previous version:
*) capsman - added 802.11g/n band
[juanvi@xxx] /caps-man> configuration set channel.band=
2ghz-b  2ghz-b/g  2ghz-b/g/n  2ghz-onlyg  2ghz-onlyn  5ghz-a  5ghz-a/n  5ghz-a/n/ac  5ghz-onlyac  5ghz-onlyn
Last edited by juanvi on Tue Mar 22, 2016 6:11 pm, edited 1 time in total.
¡vʞvdnX puv ···SOɹǝʇnoɹ ʞıʇoɹʞıW oʇ sʞuvHʇ
 
RafGan
newbie
Posts: 29
Joined: Mon Jun 06, 2011 6:17 pm
Location: Poland / Silesia

Re: v6.35rc [release candidate] is released, new wireless package!

Tue Mar 22, 2016 12:20 am

Next problem with wireless-rep and 6.35rc: point to point - one bridge with eth & wlan on both sides. Two VLANs on bridge, one of them is a multicast VLAN (IPTV, IGMP on switch connected to AP), second VLAN is an unicast VLAN. When STB is off, unicast works really great - about 160Mbs (AC mode, tcp speedtest on PC), but when STB is turning on, all trafiic goes down to minimal rate (max 6Mbs). Almost no access to AP, station RX & TX rates looks good (866Mbs) but on AP, TX is 6Mbs. Telnet waits "for a caffe", winbox too. Revert back to 6.34.2 and CM2 - all works OK on this same configuration (from a long, long time on A/N and AC devices).
I was trying: /system routerboard upgrade, multicast helper, multicast buffering, bridge filters, wireless channels and wireless channel width, wireless NV2, nstreme, 802.11 - nothing better. On eoip tunnel is ok (6.35RC) -but I don't like it with IPTV.

Any ideas?

Regards,
RafG
Best Regards,
Raf G
 
Siona
Frequent Visitor
Frequent Visitor
Posts: 83
Joined: Thu Jan 29, 2015 11:56 am

Re: v6.35rc [release candidate] is released, new wireless package!

Tue Mar 22, 2016 7:44 am

Version 6.35rc34 has been released.

Changes since previous version:
*) capsman - added 802.11g/n band;
*) chr - added support for VLAN on Hyper-V;
*) hotspot - fix possible deadlock;
*) hotspot - improved html page resistance against attacks;
*) l2tp & pppoe - fixed user traffic accounting when fastpath was used;
*) pppoe - fixed crash when removing <l2tp> pppoe service;
*) winbox - added init-delay option to routerboard settings;
*) winbox - added sfp-mac for GPON interfaces;
*) winbox - added support for route action in mangle rules;

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
Problem with disconnecting wifi under capsmana with Intel cards introduced in rc33 is still persist in rc34. It occurs less frequently. I noticed it only once whole yesterday evening.
 
iakor
just joined
Posts: 9
Joined: Mon Apr 27, 2015 1:48 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Tue Mar 22, 2016 10:03 am

Good day!

With wireless-rep package there is a problem: http://forum.mikrotik.com/viewtopic.php?t=81750#p528087

I have trouble with connection to router - time after time connection is interrupted (i can not ping, winbox disconnects after less then 10 min), but wifi is not (i did not see any messages with "wireless" in log).
I tried to understand root cause:
I did reconfigure my router - WiFi interface configured only like AP (internet is on ethernet interface) - i still gots disconnects from WiFi.
I do not change configuration of the router, but disabled wireless-rep package and enabled wireless-fp package - and WiFi becomes stable (i did not lost pings, winbox connected a long time.)

I updated to the last release (6.35rc34 (testing)). But the result is the same - From time to time router disconnects.
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Tue Mar 22, 2016 10:53 am

juanvi - Do you use wireless-rep package?
 
User avatar
juanvi
Member Candidate
Member Candidate
Posts: 164
Joined: Mon May 05, 2014 6:55 pm
Location: SPAIN

Re: v6.35rc [release candidate] is released, new wireless package!

Tue Mar 22, 2016 10:58 am

juanvi - Do you use wireless-rep package?
Using cm2
¡vʞvdnX puv ···SOɹǝʇnoɹ ʞıʇoɹʞıW oʇ sʞuvHʇ
 
darkprocess
Member Candidate
Member Candidate
Posts: 253
Joined: Fri Mar 20, 2015 1:16 pm

v6.35rc [release candidate] is released, new wireless package!

Tue Mar 22, 2016 11:01 am

Same issue here with the rep package
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Tue Mar 22, 2016 11:28 am

You must have at least 635rc34 and wireless-rep package on CAP device and also on CAPsMAN:

*) capsman - added 802.11g/n band;
*) wireless-rep - added 802.11g/n only band;
 
User avatar
Cha0s
Forum Veteran
Forum Veteran
Posts: 913
Joined: Tue Oct 11, 2005 4:53 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Tue Mar 22, 2016 12:27 pm

You must have at least 635rc34 and wireless-rep package on CAP device and also on CAPsMAN:

*) capsman - added 802.11g/n band;
*) wireless-rep - added 802.11g/n only band;
Any news about mAP Lite clock drift?

http://forum.mikrotik.com/viewtopic.php ... 31#p527731
http://forum.mikrotik.com/viewtopic.php ... 80#p527880
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Tue Mar 22, 2016 3:16 pm

Version 6.35rc35 has been released.

Changes since previous version:
*) chr - fixed kernel crash when virtual ethernet was not connected to anything in Hyper-V;
*) chr - implemented kernel crash saving to autosupout.rif (will utilize additional 24Mb of RAM);
*) romon - fix romon discovery after of romon ID change;
*) userman - fixed www crash;
*) wireless - fix crash on nstreme-dual interface stats update;

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
User avatar
kometchtech
Member Candidate
Member Candidate
Posts: 194
Joined: Sat Jun 15, 2013 4:25 am
Location: Japan
Contact:

Re: v6.35rc [release candidate] is released, new wireless package!

Tue Mar 22, 2016 4:26 pm

Flapping to and to apply RB3011 to the ROS35rc35 interface.
And trying to get the supout.rif file at the same time, it is LCD display buggy restarted without permission.

[Ticket#2016032266000631]
--
Routerboard Users Group JP
http://www.rb-ug.jp/
CCR1009-8G-1S-1S+, RB750Gr3, CRS226-24G-2S+, RB850Gx2, RB960PGS, CRS317-1G-16S+,
RB2011UAS, CRS125-24G-1S, RB962UiGS-5HacT2HnT, CRS212-1G-10S-1S+, RB3011UiAS
 
User avatar
juanvi
Member Candidate
Member Candidate
Posts: 164
Joined: Mon May 05, 2014 6:55 pm
Location: SPAIN

Re: v6.35rc [release candidate] is released, new wireless package!

Tue Mar 22, 2016 6:07 pm

Version 6.35rc35 has been released.
*) userman - fixed www crash;

What a small changelog with big (for me) things inside! I thought would never come! Can't wait for testing!
_______________________________________________________
 by strods » 22 Mar 2016, 10:28


You must have at least 635rc34 and wireless-rep package on CAP device and also on CAPsMAN:

*) capsman - added 802.11g/n band;
*) wireless-rep - added 802.11g/n only band;
Running 6.35rc34 with cm2 package I've found the gn mode under capsman provisioning but is missing under config:
[juanvi@xxx] > caps-man provisioning set hw-supported-modes=
a  a-turbo  ac  an  b  g  g-turbo  gn

[juanvi@xxx] /caps-man> configuration set channel.band=
2ghz-b  2ghz-b/g  2ghz-b/g/n  2ghz-onlyg  2ghz-onlyn  5ghz-a  5ghz-a/n  5ghz-a/n/ac  5ghz-onlyac  5ghz-onlyn
Can explain it better please?

Thanks
¡vʞvdnX puv ···SOɹǝʇnoɹ ʞıʇoɹʞıW oʇ sʞuvHʇ
 
Siona
Frequent Visitor
Frequent Visitor
Posts: 83
Joined: Thu Jan 29, 2015 11:56 am

Re: v6.35rc [release candidate] is released, new wireless package!

Tue Mar 22, 2016 10:05 pm

Version 6.35rc35 has been released.

Changes since previous version:
*) chr - fixed kernel crash when virtual ethernet was not connected to anything in Hyper-V;
*) chr - implemented kernel crash saving to autosupout.rif (will utilize additional 24Mb of RAM);
*) romon - fix romon discovery after of romon ID change;
*) userman - fixed www crash;
*) wireless - fix crash on nstreme-dual interface stats update;

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
Still the same - disconnecting laptop with intel card.

Image
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 23, 2016 11:49 am

Version 6.35rc37 has been released.

Changes since previous version:
*) chr - fixed Hyper-V booting from SCSI;
*) chr - fixed Hyper-V on windows 8/10 reboot loop;
*) chr - implemented automatic storage increase on disk image size increase;
*) chr - no more installation on first boot;
*) lte - supported modems now use unsolicit events for network monitoring;
*) rb3011 - fixed high cpu load breaks ethernet stats;
*) rb3011 - fixed link down messages;
*) winbox - hotspot default-trial user shows profile as "unknown" in Winbox;

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
Siona
Frequent Visitor
Frequent Visitor
Posts: 83
Joined: Thu Jan 29, 2015 11:56 am

Wed Mar 23, 2016 12:03 pm

What about disconnecting issue?
 
User avatar
kometchtech
Member Candidate
Member Candidate
Posts: 194
Joined: Sat Jun 15, 2013 4:25 am
Location: Japan
Contact:

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 23, 2016 12:10 pm

Just my environment has confirmed the phenomenon might end up flapping from the ether6 to the ether10 interface.

Routerboard:RB3011
ROS6.35rc37

[Ticket#2016032266000631]

My best regards.
--
Routerboard Users Group JP
http://www.rb-ug.jp/
CCR1009-8G-1S-1S+, RB750Gr3, CRS226-24G-2S+, RB850Gx2, RB960PGS, CRS317-1G-16S+,
RB2011UAS, CRS125-24G-1S, RB962UiGS-5HacT2HnT, CRS212-1G-10S-1S+, RB3011UiAS
 
hedele
Member
Member
Posts: 338
Joined: Tue Feb 24, 2009 11:23 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 23, 2016 1:53 pm

Version 6.35rc37 has been released.
*) lte - supported modems now use unsolicit events for network monitoring;
Unfortunately, this still breaks compatibility with Huawei ME909s (Ticket#2016032166000454)
 
jdsousa
just joined
Posts: 5
Joined: Fri Oct 26, 2012 9:07 pm

Version 6.35rc37

Wed Mar 23, 2016 3:54 pm

When I install Version 6.35rc37 x86 and when HD boot gives kernel panic and can not start the system again.

Thanks.
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 24, 2016 9:23 am

Version 6.35rc40 has been released.

Changes since previous version:

*) bonding - fixed crash when creating vlans on bonding interface;
*) bonding - fixed mac-address disappearance after reboot in specific setups;
*) chr - fixed reboots with license and queues;
*) chr - implemented automatic storage increase on disk image size increase;
*) fastpath - improved vlan fastpath;
*) map lite - added hardware WPS button support;
*) ppp - fixed ppp interface reconnect when uPnP was used;
*) quickset - fixed situations when hidden password was passed as ******* from winbox and webfig;
*) quickset - fixed wan interface selection on CCR1009-8G-1S-1S+;
*) quickset - use 5Ghz interface instead of 2GHz interface on SXT Lite5 ac;
*) routing - fixed routing-marks were not erased from memory when they are not being used;
*) winbox - added init-delay option to routerboard settings;

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 24, 2016 9:24 am

Version will require at least Winbox 3.4:
http://forum.mikrotik.com/viewtopic.php?f=21&t=106142
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 24, 2016 12:27 pm

Version 6.35rc41 has been released.

Changes since previous version:
*) bonding - fixed mac-address disappearance after reboot in specific setups;
*) chr - fixed reboots with license and queues;
*) quickset - fixed invalid date adjusted the signal threshold for the signal chart and refresh rate;

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
nkourtzis
Member Candidate
Member Candidate
Posts: 206
Joined: Tue Dec 11, 2012 12:56 am
Location: Greece

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 24, 2016 1:39 pm

Version 6.35rc40 has been released.

Changes since previous version:

[...]
*) winbox - added init-delay option to routerboard settings;
After upgrading, the option has dissapeared from routerboard settings.
Passionate about networks
Enthusiastic about Mikrotik
MTCNA | MTCRE | MTCINE

No trees were killed to send this message,
but a large number of electrons were terribly inconvenienced.
 
User avatar
pietroscherer
Trainer
Trainer
Posts: 170
Joined: Thu Mar 05, 2015 3:05 pm
Location: RS, Brazil
Contact:

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 24, 2016 1:56 pm

Version 6.35rc35 has been released.

Changes since previous version:
*) chr - fixed kernel crash when virtual ethernet was not connected to anything in Hyper-V;
*) chr - implemented kernel crash saving to autosupout.rif (will utilize additional 24Mb of RAM);
*) romon - fix romon discovery after of romon ID change;
*) userman - fixed www crash;
*) wireless - fix crash on nstreme-dual interface stats update;

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.

Thanks especially for RoMON fix :D
Pietro Scherer
http://www.tchesolutions.com.br [ISPs Consulting and Training]
http://www.routermage.com [Backup and Automation System]
:D
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 24, 2016 2:35 pm

nkourtzis - At first we implemented checkbox. Afterwards we improved it and now it shows up only on devices which has this feature.
 
User avatar
kometchtech
Member Candidate
Member Candidate
Posts: 194
Joined: Sat Jun 15, 2013 4:25 am
Location: Japan
Contact:

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 24, 2016 2:41 pm

Version 6.35rc41 has been released.

Changes since previous version:
*) bonding - fixed mac-address disappearance after reboot in specific setups;
*) chr - fixed reboots with license and queues;
*) quickset - fixed invalid date adjusted the signal threshold for the signal chart and refresh rate;

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
It does not resolve the behavior to flapping at the RB3011 interface.

[Ticket #2016032466000172]
--
Routerboard Users Group JP
http://www.rb-ug.jp/
CCR1009-8G-1S-1S+, RB750Gr3, CRS226-24G-2S+, RB850Gx2, RB960PGS, CRS317-1G-16S+,
RB2011UAS, CRS125-24G-1S, RB962UiGS-5HacT2HnT, CRS212-1G-10S-1S+, RB3011UiAS
 
Siona
Frequent Visitor
Frequent Visitor
Posts: 83
Joined: Thu Jan 29, 2015 11:56 am

Thu Mar 24, 2016 2:50 pm

Still problem with rep package with disappearing wifi access (wifi interface shows as connected but not work).
 
darkprocess
Member Candidate
Member Candidate
Posts: 253
Joined: Fri Mar 20, 2015 1:16 pm

v6.35rc [release candidate] is released, new wireless package!

Thu Mar 24, 2016 2:58 pm

Same here. Connected but no traffic. Has to disconnect and reconnect
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 24, 2016 3:10 pm

Version 6.35rc42 has been released.

Changes since previous version:
*) chr - fixed bridge firewall;
*) chr - make shutdown request from hyper-v work (might fix other hypervisor as well);
*) dude - fixed dude login logging, no more shows as winbox login;
*) timezone - fixed reboot by watchdog when selecting timezones from the end of list

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
Siona
Frequent Visitor
Frequent Visitor
Posts: 83
Joined: Thu Jan 29, 2015 11:56 am

Thu Mar 24, 2016 3:15 pm

Where can I find previous version of rc files? Need 6.35rc19.
 
Zorro
Long time Member
Long time Member
Posts: 676
Joined: Wed Apr 16, 2014 2:43 pm

Re:

Thu Mar 24, 2016 10:37 pm

Where can I find previous version of rc files? Need 6.35rc19.
http://download2.mikrotik.com/routeros/ ... e-6.19.zip ?
 
Siona
Frequent Visitor
Frequent Visitor
Posts: 83
Joined: Thu Jan 29, 2015 11:56 am

Fri Mar 25, 2016 12:37 am

Thanks!
 
User avatar
bajodel
Long time Member
Long time Member
Posts: 545
Joined: Sun Nov 24, 2013 8:30 am
Location: Italy

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Mar 25, 2016 1:11 pm

Version 6.35rc41 has been released.
..[CUT]..
If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
It does not resolve the behavior to flapping at the RB3011 interface.

[Ticket #2016032466000172]


Version 6.35rc42 ..port flapping on 3011 persist (ports 6-10), device unusable
 
mszulc
just joined
Posts: 3
Joined: Mon Jun 23, 2014 2:01 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Mar 25, 2016 8:31 pm

I had the same 'non working' wifi problem as described by others with rep package.

End user device works good for some time and suddenly looses connectivity while showing wifi as connected. Simple disconnect/connect solves the problem for some time (5-10 minutes). If left with no intervention for some time the connectivity comes back in a few minutes - and this cycle happens again.
Revert to cm2 solves permanently.

Tested on 2011 and hap ac for 2 and 5 ghz with wpa2 psk, local config, no capsman.

I'm not sure but I feel like this mostly happens (or is more frequent) on iOS devices, but this could be not true - more testing required.
 
benoga
just joined
Posts: 13
Joined: Wed Mar 09, 2016 7:50 am

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Mar 25, 2016 9:27 pm

i can confirm the wifi disconnect some times with all our 4 android devices. router is ccr1009 with capsman to hap ac wifi. look like not only iOS problem.
installed version 6.35rc42 rep package.
 
Beone
Member Candidate
Member Candidate
Posts: 243
Joined: Fri Feb 11, 2011 1:11 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Sat Mar 26, 2016 1:24 pm

V6.35rc42 with cm2 package and capsman also results in regularly wifi latency spikes to 1 sec and 2 seconds.

Reverting back the CAPSMAN to v6.34.3 while leaving the caps on v6.35rc42 resolves this latency spike issue. We use centralised forwarding on CCR
 
User avatar
Cha0s
Forum Veteran
Forum Veteran
Posts: 913
Joined: Tue Oct 11, 2005 4:53 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Sat Mar 26, 2016 2:01 pm

Version 6.35rc41 has been released.
..[CUT]..
If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
It does not resolve the behavior to flapping at the RB3011 interface.

[Ticket #2016032466000172]


Version 6.35rc42 ..port flapping on 3011 persist (ports 6-10), device unusable
Also confirmed here.

Downgraded back to 6.35rc29 and the problem was resolved.
 
User avatar
bajodel
Long time Member
Long time Member
Posts: 545
Joined: Sun Nov 24, 2013 8:30 am
Location: Italy

Re: v6.35rc [release candidate] is released, new wireless package!

Sat Mar 26, 2016 2:27 pm

Version 6.35rc42 ..port flapping on 3011 persist (ports 6-10), device unusable
Also confirmed here.
Downgraded back to 6.35rc29 and the problem was resolved.
I'm quite new to 3011 so I went back to 6.34.3, flapping resolved but I've encountered some strange 'loop' alert on bridges witch have VLANs (temp "bad fixed" moving VLANs onto real interfaces instead of bridge ones)

Thanks Cha0s for hint ..since I'm actually on lab testing, I can move to 6.35rc trunk again stopping at rc29 (for now).

Also, I cannot succeed in partitioning my lab 3011, probably a known issue but better to note here..
Last edited by bajodel on Sun Mar 27, 2016 8:53 am, edited 1 time in total.
 
IntrusDave
Forum Guru
Forum Guru
Posts: 1290
Joined: Fri May 09, 2014 4:36 am
Location: Rancho Cucamonga, CA

Re: Re:

Sun Mar 27, 2016 5:40 am

Where can I find previous version of rc files? Need 6.35rc19.
http://download2.mikrotik.com/routeros/ ... e-6.19.zip ?
actually...
http://download2.mikrotik.com/routeros/6.35rc19/all_packages-mipsbe-6.35rc19.zip
change the "mipsbe" to the platform you need.
David Joyce
Network & Security Engineer
Intrus Technologies, LLC.
Rancho Cucamonga, CA, USA
 
KBV
Frequent Visitor
Frequent Visitor
Posts: 78
Joined: Mon Nov 10, 2014 7:02 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Mar 28, 2016 9:13 am

CRL do not work correctly
Self-signed certificates do not contain CRL when working through winbox - CRL field not available.
When signing via CLI this is no problem.

But CRL is still not working correctly when you export / import the certificate- then CRL contains inappropriate information.
 
Zorro
Long time Member
Long time Member
Posts: 676
Joined: Wed Apr 16, 2014 2:43 pm

Re: Re:

Mon Mar 28, 2016 12:41 pm

Where can I find previous version of rc files? Need 6.35rc19.
http://download2.mikrotik.com/routeros/ ... e-6.19.zip ?
actually...
http://download2.mikrotik.com/routeros/6.35rc19/all_packages-mipsbe-6.35rc19.zip
change the "mipsbe" to the platform you need.
yeah, right. i just picked MIPSBE because probability and propagation between gear.
year later that might be "ARM", for example.
 
nkourtzis
Member Candidate
Member Candidate
Posts: 206
Joined: Tue Dec 11, 2012 12:56 am
Location: Greece

Re: v6.35rc [release candidate] is released, new wireless package!

Tue Mar 29, 2016 4:04 pm

Requests for CAPsMAN bug fixes and new features, based on my experience with the current RC version:


1. {Nice to have} Add "CCQ", P Throughput" and "Signal to Noise", "Encryption" and "Group Encryption" and "WMM Enabled" fields to CAPsMAN Registration Table.

2. {Feature} Add "Frequency Mode", "WMM Support", "Multicast Buffering", "Keepalive frames", "Adaptive Noise Immunity" and "AMPDU Priorities" to CAPsMAN Config Settings.

3. {BUG} Make "Multicast Helper=full" in CAPsMAN slave interfaces work (now the interfaces stay in default setting).

4. {BUG} Make "Country=no_country_set" work on CAPsMAN 5GHz 802.11ac interfaces (it works on 2.4GHz, but on 5GHz ones it results in "no supported band" error message, regardless of the band and frequency settings).

5. {Feature} Add a scan/freq usage feature in CAPsMAN, with an aption to run in the background. Right now, if one wants to scan, they have to detach the physical interface from the Manager, do the scan and re-attach it. [In the future, use this info to auto-adjust CAP channels and power levels.]

6. {Annoying} Stop CAPsMAN from creating virtual interfaces on CAPs with name "wlanXXX" where XXX is a number which is incremented every time the interface is disabled and re-enabled.

7. {Nice to have} Let the user rename the virtual interfaces on the CAPs, like he/she can do with physical interfaces.
Passionate about networks
Enthusiastic about Mikrotik
MTCNA | MTCRE | MTCINE

No trees were killed to send this message,
but a large number of electrons were terribly inconvenienced.
 
m94646602
newbie
Posts: 38
Joined: Thu Oct 03, 2013 5:38 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Tue Mar 29, 2016 6:05 pm

Requests for CAPsMAN bug fixes and new features, based on my experience with the current RC version:


1. {Nice to have} Add "CCQ", P Throughput" and "Signal to Noise", "Encryption" and "Group Encryption" and "WMM Enabled" fields to CAPsMAN Registration Table.

2. {Feature} Add "Frequency Mode", "WMM Support", "Multicast Buffering", "Keepalive frames", "Adaptive Noise Immunity" and "AMPDU Priorities" to CAPsMAN Config Settings.

3. {BUG} Make "Multicast Helper=full" in CAPsMAN slave interfaces work (now the interfaces stay in default setting).

4. {BUG} Make "Country=no_country_set" work on CAPsMAN 5GHz 802.11ac interfaces (it works on 2.4GHz, but on 5GHz ones it results in "no supported band" error message, regardless of the band and frequency settings).

5. {Feature} Add a scan/freq usage feature in CAPsMAN, with an aption to run in the background. Right now, if one wants to scan, they have to detach the physical interface from the Manager, do the scan and re-attach it. [In the future, use this info to auto-adjust CAP channels and power levels.]

6. {Annoying} Stop CAPsMAN from creating virtual interfaces on CAPs with name "wlanXXX" where XXX is a number which is incremented every time the interface is disabled and re-enabled.

7. {Nice to have} Let the user rename the virtual interfaces on the CAPs, like he/she can do with physical interfaces.

+1 +1 +1 Band Steering. Many times, I often need to complete the work by hand. :( :( :(
 
diorges
just joined
Posts: 17
Joined: Fri Sep 19, 2014 11:50 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Tue Mar 29, 2016 9:50 pm

MikroTik dont recognize ospfv3 bits from edgerouter, mikrotik should ignore unrecognized bits and process the packet normally as decribed in the RFC,

Look at RFC https://tools.ietf.org/html/rfc5340#appendix-A.2
 
napismizpravu
Member Candidate
Member Candidate
Posts: 135
Joined: Sat Apr 09, 2011 1:27 pm
Location: czech

Re: v6.35rc [release candidate] is released, new wireless package!

Tue Mar 29, 2016 11:59 pm

6.35rc42 - RB433UAH (power 24V 2A)

uptime 5 days error system ...crash proxy, drive disk add duplicate USB1 ...FTP to USB1 void...ftp to disk6 contents USB1

reboot RB433UAH disk OK... disk6 disappeared, USB1 functional
You do not have the required permissions to view the files attached to this post.
 
jondavy
Member Candidate
Member Candidate
Posts: 130
Joined: Tue May 12, 2009 11:14 pm
Location: Brasil

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 30, 2016 7:40 am

Requests for CAPsMAN bug fixes and new features, based on my experience with the current RC version:


1. {Nice to have} Add "CCQ", P Throughput" and "Signal to Noise", "Encryption" and "Group Encryption" and "WMM Enabled" fields to CAPsMAN Registration Table.

2. {Feature} Add "Frequency Mode", "WMM Support", "Multicast Buffering", "Keepalive frames", "Adaptive Noise Immunity" and "AMPDU Priorities" to CAPsMAN Config Settings.

3. {BUG} Make "Multicast Helper=full" in CAPsMAN slave interfaces work (now the interfaces stay in default setting).

4. {BUG} Make "Country=no_country_set" work on CAPsMAN 5GHz 802.11ac interfaces (it works on 2.4GHz, but on 5GHz ones it results in "no supported band" error message, regardless of the band and frequency settings).

5. {Feature} Add a scan/freq usage feature in CAPsMAN, with an aption to run in the background. Right now, if one wants to scan, they have to detach the physical interface from the Manager, do the scan and re-attach it. [In the future, use this info to auto-adjust CAP channels and power levels.]

6. {Annoying} Stop CAPsMAN from creating virtual interfaces on CAPs with name "wlanXXX" where XXX is a number which is incremented every time the interface is disabled and re-enabled.

7. {Nice to have} Let the user rename the virtual interfaces on the CAPs, like he/she can do with physical interfaces.
+1
and too, show Radio-name(for mikrotik stations), Distance, Traffic graphic, signal-sthrength table,ping, mac-ping, torch, mac-telnet buttons


bug: in winbox gui, on wireless interface, not show button CAP if package wireless-cap is not installed/enabled

bug: in winbox gui on interfaces in the "+" button rename the latest interface type for "interfaces" to "Controlled AP, or CAP"
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 30, 2016 11:18 am

Version 6.35rc43 has been released.

Changes since previous version:

*) fastpath - fixed show rx-bits-per-second on all VLAN interfaces;
*) nand - implemented once a week nand refresh to improve stored data integrity (will increase sector writes);

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
User avatar
NetworkPro
Forum Guru
Forum Guru
Posts: 1369
Joined: Mon Jan 05, 2009 6:23 pm
Location: Worldwide
Contact:

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 30, 2016 11:38 am

nand - implemented once a week nand refresh to improve stored data integrity (will increase sector writes)

Also for USB Flash in x86 ?
wiki.mikrotik.com/wiki/NetworkPro_on_Quality_of_Service
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1722
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 30, 2016 11:41 am

uuuu...

*) nand - implemented once a week nand refresh to improve stored data integrity (will increase sector writes);

looks like v6.35 suddenly become my new favorite version.
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.
 
slv
newbie
Posts: 46
Joined: Mon Jun 17, 2013 8:54 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 30, 2016 12:12 pm

Hi

I have 3011 and strange issues with port based VLANs [Ticket#2016031766000506] - could someone confirm same problems?
I have separate topic for that problem http://forum.mikrotik.com/viewtopic.php?f=2&t=106049

Regards
Slawek
 
sam1275
Member Candidate
Member Candidate
Posts: 110
Joined: Thu May 21, 2015 2:46 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 30, 2016 1:52 pm

When will this version become release?
 
uldis
MikroTik Support
MikroTik Support
Posts: 3427
Joined: Mon May 31, 2004 2:55 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 30, 2016 6:10 pm

V6.35rc42 with cm2 package and capsman also results in regularly wifi latency spikes to 1 sec and 2 seconds.

Reverting back the CAPSMAN to v6.34.3 while leaving the caps on v6.35rc42 resolves this latency spike issue. We use centralised forwarding on CCR
What setup you have on the CAPsMAN for the CAP interface?

What is your wireless client and what OS you use?
 
Beone
Member Candidate
Member Candidate
Posts: 243
Joined: Fri Feb 11, 2011 1:11 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 30, 2016 9:10 pm

when upgrading back to v6.35rc42 to try to reproduce, we didnt see the same behavior anymore.

CAPSMAN platform: ccr1009
caps: rb951g/rb951ui/hap ac lite
client: MacOS 10.11.4 - macbookair 7,2 - Broadcom BCM43xx 1.0 (7.21.95.175.1a6)
 
diorges
just joined
Posts: 17
Joined: Fri Sep 19, 2014 11:50 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Wed Mar 30, 2016 10:16 pm

@strods

And what about the problem with OSPFv3 with EdgeRouter, mikrotik reject EdgeRouter OSPFv3 because of a flag AF which EdgeRouter sends, but in RFC says that unrecognized bits should be ignored.
 
ofca
Member Candidate
Member Candidate
Posts: 190
Joined: Fri Aug 20, 2004 7:18 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 31, 2016 7:09 am

Was central user control/access point protection/locking from capsman already suggested?
It's kinda boring to login to 40+ access points to password protect them. ;)
 
Awax
just joined
Posts: 17
Joined: Fri Aug 16, 2013 4:18 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Thu Mar 31, 2016 1:07 pm

FastTrack doesn't work at RB750G.
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Apr 01, 2016 10:04 am

Version 6.35rc44 has been released.

Changes since previous version:
*) chr - try to renew expired license once a hour instead of 100h;
*) defconf - fixed default configuration for SXT LTE;
*) lte - improve situation when SXT modem never finds operator;
*) lte - supported modems now use unsolicited events for network monitoring;
*) rb3011 - make ether6-ether10 work if SFP module is present on bootup;
*) trafficgen - fixed console arguments;

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
PatrickKan
just joined
Posts: 7
Joined: Thu Oct 25, 2012 7:10 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Apr 01, 2016 12:11 pm

There is a serious bug introduced in rc44 for my CCR1036. After upgrade reboot, the L2MTU values for both sfp+ ports changed to 1580 from their original values of 9014. To make matter worse, neither Winbox nor console allows you to change the L2MTU back to their original values.
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Apr 01, 2016 3:05 pm

Version 6.35rc45 has been released.

Changes since previous version:

*) hotspot - make video tag work properly on hotspot login.html page
*) ipsec - fixed crash on policy update;
*) ppp - fixed ppp crash if lcp packets were lost and authentication got delayed;

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
RafGan
newbie
Posts: 29
Joined: Mon Jun 06, 2011 6:17 pm
Location: Poland / Silesia

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Apr 01, 2016 11:08 pm

My two STX 5AC are death after upgrade to this version! No access, so no suppot.rif. Tomorrow netinstall.
Best Regards,
Raf G
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1825
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: v6.35rc [release candidate] is released, new wireless package!

Fri Apr 01, 2016 11:58 pm

Since rc42 our test CCR1036 has stopped on "starting kernel" when rebooting after the update.
Last edited by nz_monkey on Sat Apr 02, 2016 2:17 am, edited 1 time in total.
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
fallenwrx
newbie
Posts: 46
Joined: Mon Jan 20, 2014 10:59 am

Re: v6.35rc [release candidate] is released, new wireless package!

Sat Apr 02, 2016 1:51 am

same issue, upgraded from 6.35rc44 to 6.35rc45, fails to boot falls back to backup partition
 
mkorban
just joined
Posts: 4
Joined: Tue May 30, 2006 1:25 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Sat Apr 02, 2016 6:29 am

same issue with 91xG 2HPnD
After the update the router is unavailable.
netinstall not help restore operability
reset is also not effective - sound can be heard, blinking LEDS forming, but a router is not available.
 
User avatar
cREoz
just joined
Posts: 10
Joined: Wed Sep 04, 2013 9:51 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Sat Apr 02, 2016 11:33 am

On update from 6.35rc43 to 6.35rc45 my RB951G-2HnD got boot-loop :?
How i can recover him?
 
mistry7
Forum Guru
Forum Guru
Posts: 1351
Joined: Tue Oct 13, 2009 11:57 am
Location: Germany

Re: v6.35rc [release candidate] is released, new wireless package!

Sat Apr 02, 2016 12:09 pm

On update from 6.35rc43 to 6.35rc45 my RB951G-2HnD got boot-loop :?
How i can recover him?

On my CRS too, need to netinstall
 
Shak7
just joined
Posts: 4
Joined: Sun Jan 17, 2016 6:48 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Sat Apr 02, 2016 12:58 pm

Same thing here with RB2011UiAS-2HnD-IN. Tried many times to Netinstall. The router always tries Ethernet boot, fails then says kernel failure before rebooting itself.
Last edited by Shak7 on Sat Apr 02, 2016 8:17 pm, edited 1 time in total.
 
raffav
Member Candidate
Member Candidate
Posts: 291
Joined: Wed Oct 24, 2012 4:40 am

Re: v6.35rc [release candidate] is released, new wireless package!

Sat Apr 02, 2016 5:39 pm

same thing on BASEBOX2 and RB450G

on RB450 using serial pot i get the kernel panic information that no system found
so i think that when start the process uninstalling the old one an installing the news on it crash so there is no system at all
via netinstall i was able to put rc45 up with no problem
 
RafGan
newbie
Posts: 29
Joined: Mon Jun 06, 2011 6:17 pm
Location: Poland / Silesia

Re: v6.35rc [release candidate] is released, new wireless package!

Sat Apr 02, 2016 8:03 pm

My two STX 5AC are death after upgrade to this version! No access, so no suppot.rif. Tomorrow netinstall.

Netinstall to 6.34.4 - works good again :D
Best Regards,
Raf G
 
easyspot
Frequent Visitor
Frequent Visitor
Posts: 66
Joined: Thu Jun 07, 2012 7:09 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Sat Apr 02, 2016 8:23 pm

Last time using 6.35rc, ended with link dead for 1 day. Must do netinstall on both side. Now using 6.32.4 to keep out of trouble. No more rc version for me :D
 
Shak7
just joined
Posts: 4
Joined: Sun Jan 17, 2016 6:48 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Sat Apr 02, 2016 9:01 pm

Same thing here with RB2011UiAS-2HnD-IN. Tried many times to Netinstall. The router always tries Ethernet boot, fails then says kernel failure before rebooting itself.
Worked flawlessly with Netinstall 6.34.4
Thanks to Raf G ! :D
 
User avatar
Cha0s
Forum Veteran
Forum Veteran
Posts: 913
Joined: Tue Oct 11, 2005 4:53 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Sun Apr 03, 2016 11:04 am

*) rb3011 - make ether6-ether10 work if SFP module is present on bootup;
Does this resolve the port flapping issue that appeared on some rc after rc29?

If yes, did anyone manage to upgrade to the latest rc without 'bricking' their board?
There are a few reports not being able to boot afterwards.
 
Florian
Frequent Visitor
Frequent Visitor
Posts: 67
Joined: Sun Mar 13, 2016 9:45 am
Location: France

Re: v6.35rc [release candidate] is released, new wireless package!

Sun Apr 03, 2016 9:02 pm

I'm staying on rc43, rc45 seems risky...
- Sorry for my english -
 
upower3
Member
Member
Posts: 388
Joined: Thu May 07, 2015 11:46 am

Re: v6.35rc [release candidate] is released, new wireless package!

Sun Apr 03, 2016 11:10 pm

Well, (at least) on weak devices like hAP lite I used to see 0 volts as voltage. Very sad to see that:

http://prntscr.com/anqej6

But as far as I know this is not even this RC problem. Any fix to come?

By the way when it comes to voltage if it is possible to see which power source is used on more powerful devices that have both PoE-in and power source? I'd be pretty happy to see "voltage" and "Power input" as two separate value (to have it in SNMP will be the best idea, great to monitor the power source health).
 
User avatar
bajodel
Long time Member
Long time Member
Posts: 545
Joined: Sun Nov 24, 2013 8:30 am
Location: Italy

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Apr 04, 2016 2:03 am

*) rb3011 - make ether6-ether10 work if SFP module is present on bootup;
Does this resolve the port flapping issue that appeared on some rc after rc29?

If yes, did anyone manage to upgrade to the latest rc without 'bricking' their board?
There are a few reports not being able to boot afterwards.
My lab rb3011 is working flawlessly with this new rc ..port flapping fixed
 
User avatar
mbfound
Member Candidate
Member Candidate
Posts: 134
Joined: Tue Jul 01, 2014 1:18 pm
Location: South Africa

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Apr 04, 2016 5:36 am

Anyone lose wireless on 6.35rc45?

It completely disappeared on a 951Ui-2HnD. Reboot and resetting didn't help. Downgrading to stable fixed it.

Upgrading to RC again now to see if it happens again.
 
IntrusDave
Forum Guru
Forum Guru
Posts: 1290
Joined: Fri May 09, 2014 4:36 am
Location: Rancho Cucamonga, CA

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Apr 04, 2016 5:53 am

Anyone lose wireless on 6.35rc45?

It completely disappeared on a 951Ui-2HnD. Reboot and resetting didn't help. Downgrading to stable fixed it.

Upgrading to RC again now to see if it happens again.
Not here. I have 3 RB's with wifi running with no issue.
David Joyce
Network & Security Engineer
Intrus Technologies, LLC.
Rancho Cucamonga, CA, USA
 
w0lt
Member
Member
Posts: 486
Joined: Wed Apr 02, 2008 2:12 pm
Location: Minnesota USA

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Apr 04, 2016 5:55 am

Upgrading to ROS v6.35rc45 has caused so many problems (bricking units), packages missing that I have spent the past few days just cleaning up the mess.
I have downgraded all but one router (that I can't reach now) to v6.34.4. So far, so good.
I realize this is rc revisions but is someone at Mikrotik deliberately trying to sabotage the firmware? :(
Think I'll stick with non-rc for a while till I'm convinced Tik is releasing nonvolatile firmware.
MTCNA - 2011

" The Bitterness of Poor Quality Remains Long After the Sweetness of Low Price is Forgotten "

Image
 
PeterDoBrasil
Member Candidate
Member Candidate
Posts: 134
Joined: Sun Aug 23, 2015 6:55 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Apr 04, 2016 6:03 am

yes, rc 45 is very problematic
 
nkourtzis
Member Candidate
Member Candidate
Posts: 206
Joined: Tue Dec 11, 2012 12:56 am
Location: Greece

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Apr 04, 2016 8:56 am

Upgrading to ROS v6.35rc45 has caused so many problems (bricking units), packages missing that I have spent the past few days just cleaning up the mess.
I have downgraded all but one router (that I can't reach now) to v6.34.4. So far, so good.
I realize this is rc revisions but is someone at Mikrotik deliberately trying to sabotage the firmware? :(
Think I'll stick with non-rc for a while till I'm convinced Tik is releasing nonvolatile firmware.
Keep in mind that is is called release CANDIDATE, that is, not released yet. If you want stability, stay with the stable version.
Passionate about networks
Enthusiastic about Mikrotik
MTCNA | MTCRE | MTCINE

No trees were killed to send this message,
but a large number of electrons were terribly inconvenienced.
 
whitbread
Member Candidate
Member Candidate
Posts: 108
Joined: Fri Nov 08, 2013 9:55 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Apr 04, 2016 11:08 am

Sure but RC is not Test; so a bricked unit is not be expected usually...

If something is not working you rather expect to downgrade to your last working version and not to start from scratch.
 
PatrickKan
just joined
Posts: 7
Joined: Thu Oct 25, 2012 7:10 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Apr 04, 2016 11:18 am

I tried both 6.35r44 and r45 on my ccr1036 and crs226. Here were the combinations of problems:

6.35r44:
1. On CCRr1036 - it messed up the MTU and L2MTU values for both SFP+ ports and broke both SFP+ links. The worst of all, neither Winbox nor console was able to restore the original L2MTU values.
2. On CRS226 - it sent the unit into bootloop after reboot and netinstall had to be used to restore to older releases.

6.35r45:

1. On CCRr1036 - it messed up the MTU and L2MTU values for both SFP+ ports and broke bothl SFP+ links. The worst of all, both Winbox and console were unable to restore the original L2MTU values.

2. On CRS226 - it didn't cause bootloop.

I am back to 6.35r43 now.


Hope it helps.
 
User avatar
juanvi
Member Candidate
Member Candidate
Posts: 164
Joined: Mon May 05, 2014 6:55 pm
Location: SPAIN

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Apr 04, 2016 11:19 am

I disagree: For me RC=TEST
Last edited by juanvi on Mon Apr 04, 2016 11:25 am, edited 1 time in total.
¡vʞvdnX puv ···SOɹǝʇnoɹ ʞıʇoɹʞıW oʇ sʞuvHʇ
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24315
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Apr 04, 2016 11:24 am

RC are essentially "Nighty Builds", don't rely on them in important networks.
No answer to your question? How to write posts
 
whitbread
Member Candidate
Member Candidate
Posts: 108
Joined: Fri Nov 08, 2013 9:55 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Apr 04, 2016 2:27 pm

No problem for me apart from the naming. I am a SOHO user only and nobody else than me is relying on my infrastructure.
 
vortex
Forum Veteran
Forum Veteran
Posts: 714
Joined: Sat Feb 16, 2013 6:10 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Apr 04, 2016 2:39 pm

RC are essentially "Nighty Builds", don't rely on them in important networks.
Then they are not RC. Similar naming problem as "Current".
 
notToNew
Member Candidate
Member Candidate
Posts: 148
Joined: Fri Feb 19, 2016 3:15 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Apr 04, 2016 2:55 pm

Then they are not RC. Similar naming problem as "Current".
Right! Current RC-Branch should go to "development"...
--------------------------------------------------------------------------------------------
CCR1036-12G-4S, several 952Ui-5ac2nD, ...
 
vortex
Forum Veteran
Forum Veteran
Posts: 714
Joined: Sat Feb 16, 2013 6:10 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Apr 04, 2016 3:14 pm

And I am thinking "Current" is maybe 2 things in one: Feature + RC

Nightly -> Beta -> RC -> Feature -> Bugfix
 
User avatar
kometchtech
Member Candidate
Member Candidate
Posts: 194
Joined: Sat Jun 15, 2013 4:25 am
Location: Japan
Contact:

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Apr 04, 2016 3:38 pm

And I am thinking "Current" is maybe 2 things in one: Feature + RC

Nightly -> Beta -> RC -> Feature -> Bugfix
+1
--
Routerboard Users Group JP
http://www.rb-ug.jp/
CCR1009-8G-1S-1S+, RB750Gr3, CRS226-24G-2S+, RB850Gx2, RB960PGS, CRS317-1G-16S+,
RB2011UAS, CRS125-24G-1S, RB962UiGS-5HacT2HnT, CRS212-1G-10S-1S+, RB3011UiAS
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1722
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Apr 04, 2016 3:43 pm

Each developer of software have it's own unique way to classify software releases.
Big thanks to MikroTIK to transfer to 3 stage release (RC, Current, bugfix) it is sufficient for all my needs.

I'm testing new RC mainly because of
*) nand - implemented once a week nand refresh to improve stored data integrity (will increase sector writes);

i have upgraded ~50 oldest devices in the network and it looks like 4 of them was too far gone, so netinstall was necessary, after it all devices worked perfectly, i was even able to keep config on all of them. Anyone else have noticed something similar? after v6.35rc43
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.
 
nkourtzis
Member Candidate
Member Candidate
Posts: 206
Joined: Tue Dec 11, 2012 12:56 am
Location: Greece

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Apr 04, 2016 4:25 pm

My experience was similar. Two out of around 40 devices were "bricked" by RC45, requiring a netinstall. One of them (a RB2011UiAS-RM) stuck on reboot and when power-cycled it came up but the system was corrupted (it was not even reporting a ROS version) but basic (hardware) interfaces and bridges were working. Not the ppp ones though. The other one, a hAP AC, was bootlooping no matter what. Retaining the current config during netinstall worked, at least in the hAP AC (for the other one I had kept a config file).

One other thing that I noticed (not related to the above problem) was that when all three chains are enabled on the 2.4GHz interface of the hAP AC, not all devices can associate. For example two phones, one with Android and the other with Windows Phone could not connect. When I turned off chain 2 (the third chain) devices which were not associating before, could connect successfully. Same with chain 1, although sync speeds seemed to be lower in this case. The 5GHz interface does not seem to have such a problem. I think (I am not sure though) that this is something that occured lately. Unfortuantely, it was not reported earlier so I cannot give any further info. But my observation above was made yesterday.
Passionate about networks
Enthusiastic about Mikrotik
MTCNA | MTCRE | MTCINE

No trees were killed to send this message,
but a large number of electrons were terribly inconvenienced.
 
vortex
Forum Veteran
Forum Veteran
Posts: 714
Joined: Sat Feb 16, 2013 6:10 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Apr 04, 2016 5:06 pm

Given by the regressions and the number of iterations on the Current stream, I would say it is Beta+Feature, actually.

Which would be more damning evidence of the bad RC naming.
 
vortex
Forum Veteran
Forum Veteran
Posts: 714
Joined: Sat Feb 16, 2013 6:10 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Apr 04, 2016 5:29 pm

Basically:

- Almost all the fixes in the Current stream should be for new features or bugs still present in Bugfix.
- Most of the time RC should move to Current with 0 or 1 iterations.
 
User avatar
BartoszP
Forum Guru
Forum Guru
Posts: 1719
Joined: Mon Jun 16, 2014 1:13 pm
Location: Poland

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Apr 04, 2016 5:31 pm

Big thanks to MikroTIK to transfer to 3 stage release (RC, Current, bugfix) it is sufficient for all my needs.
It is much, much better than older approach.
Real admins use real keyboards.
 
vortex
Forum Veteran
Forum Veteran
Posts: 714
Joined: Sat Feb 16, 2013 6:10 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Apr 04, 2016 5:39 pm

Big thanks to MikroTIK to transfer to 3 stage release (RC, Current, bugfix) it is sufficient for all my needs.
It is much, much better than older approach.
But it seems it is still not good enough for some people who can't just stay on Bugfix.
 
vortex
Forum Veteran
Forum Veteran
Posts: 714
Joined: Sat Feb 16, 2013 6:10 pm

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Apr 04, 2016 5:56 pm

Actually, there should be 2 real RC streams, one for Bugfix, and one for Current.
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1722
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: v6.35rc [release candidate] is released, new wireless package!

Mon Apr 04, 2016 6:00 pm

Vortex and co. You can't keep everyone happy, and you never will.
Please, find the old topic about the release system and post your feelings about it there. Hijacking technical topics only delays the problem solving.
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.

Who is online

Users browsing this forum: No registered users and 46 guests