Community discussions

 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

v6.35.1 [current] is released!

Tue Apr 26, 2016 2:28 pm

What's new in 6.35.1 (2016-Apr-25 09:29):

*) bonding - do not corrupt bonding statistics on configuration changes;
*) bonding - fixed crash when vlan parent mtu is higher than bonding mtu;
*) ethernet - do not allow mtu to be higher than l2mtu and l2mtu to be higher than max-l2mtu (reduce automatically on upgrade if it was wrong before);
*) log - fixed reboot log messages;
*) lte - do not allow to set multiple modes when it is not supported;
*) lte - fixed address acquisition on Huaweii LTE interfaces;
*) winbox - show voltage in Health only if there actually is voltage monitor;
*) wireless - fixed issue when CAPsMAN could lock CAPs interface;

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
shovon
just joined
Posts: 24
Joined: Sat May 07, 2011 9:31 am
Location: Dhaka, Bangladesh
Contact:

Re: v6.35.1 [current] is released!

Tue Apr 26, 2016 3:02 pm

Just upgraded my 3011 to this version... looks good!
 
User avatar
kometchtech
Member Candidate
Member Candidate
Posts: 194
Joined: Sat Jun 15, 2013 4:25 am
Location: Japan
Contact:

Re: v6.35.1 [current] is released!

Tue Apr 26, 2016 3:36 pm

I get error in SNMP and script.
That seems to dissolve after restarting.
The identity also seems to disappear.

12:47:21 snmp,warning timeout while waiting for program 24
12:48:04 script,warning DefConf: Unable to find wireless interface(s)

After the log does not include the Timezone.
--
Routerboard Users Group JP
http://www.rb-ug.jp/
CCR1009-8G-1S-1S+, RB750Gr3, CRS226-24G-2S+, RB850Gx2, RB960PGS, CRS317-1G-16S+,
RB2011UAS, CRS125-24G-1S, RB962UiGS-5HacT2HnT, CRS212-1G-10S-1S+, RB3011UiAS
 
irghost
Member Candidate
Member Candidate
Posts: 281
Joined: Sun Feb 21, 2016 1:49 pm

Re: v6.35.1 [current] is released!

Tue Apr 26, 2016 5:41 pm

PCC load balancing does not work after upgrade
routes does not work
Image
MTCNA MTCRE MTCTCE MTCUME MTCWE MTCIPv6E MTCINE
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6616
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: v6.35.1 [current] is released!

Tue Apr 26, 2016 6:14 pm

irghost, please send us support output file from your router (to support@mikrotik.com).

kometchtech. Script error is self-explained, it seems that wireless interface in configuration script appeared earlier, then device was up.
Perhaps you need to add some delay to the script.

What snmp configuration do you have? Do you get such error on every reboot?
 
orry
just joined
Posts: 2
Joined: Thu Jan 03, 2013 5:42 pm

Re: v6.35.1 [current] is released!

Tue Apr 26, 2016 6:16 pm

SXT LTE after upgrading 6.34.4 =>6.35.1 does not finding LTE interface. One more reboot and LTE is found and after 30 sec is connected to network and working.
SXT LTE with RouterOS 6.34.4 and Firmware 3.32 crashes at least once per day. Looses connection to LTE network (PLME search), or Kernel crash.
With big hope i'm waiting good job from 6.35.1
 
irghost
Member Candidate
Member Candidate
Posts: 281
Joined: Sun Feb 21, 2016 1:49 pm

Re: v6.35.1 [current] is released!

Tue Apr 26, 2016 6:25 pm

irghost, please send us support output file from your router (to support@mikrotik.com).

kometchtech. Script error is self-explained, it seems that wireless interface in configuration script appeared earlier, then device was up.
Perhaps you need to add some delay to the script.

What snmp configuration do you have? Do you get such error on every reboot?
there is another problem time zone set back to default

i cant send my supout because i downgrade to 6.35 and problems fixed

please first try test with ur routers then publish it
full of bugs
MTCNA MTCRE MTCTCE MTCUME MTCWE MTCIPv6E MTCINE
 
pe1chl
Forum Guru
Forum Guru
Posts: 5923
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.35.1 [current] is released!

Tue Apr 26, 2016 8:16 pm

kometchtech. Script error is self-explained, it seems that wireless interface in configuration script appeared earlier, then device was up.
Perhaps you need to add some delay to the script.

What snmp configuration do you have? Do you get such error on every reboot?
I see the same errors as kometchtech reported and I have no particular script installed.
This is just a RB951G-2HnD with normal configuration on it.
However, the errors do not appear to affect the function of the router.
SNMP works, Wireless works.
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35.1 [current] is released!

Tue Apr 26, 2016 8:27 pm

Of course versions are tested before release. But if you would try to count possibilities in RouterOS and calculate possible combinations of them, then number would be unexpectedly large. It is not possible to test everything in lab.

In most cases problems are caused by configuration issues or unusual combinations and/or new features.

In any case you must generate supout file on this version after you have experienced some kind of problem and send it to support@mikrotik.com. We will investigate each separate case and try to find reason and solution. Even if you will downgrade and use older version still generate supout file, send it to support and then downgrade.

Since release there are only 7 posts and not all of them are negative. You can not say that version is full of bugs if one particular issue appears.
 
irghost
Member Candidate
Member Candidate
Posts: 281
Joined: Sun Feb 21, 2016 1:49 pm

Re: v6.35.1 [current] is released!

Tue Apr 26, 2016 9:18 pm

Of course versions are tested before release. But if you would try to count possibilities in RouterOS and calculate possible combinations of them, then number would be unexpectedly large. It is not possible to test everything in lab.

In most cases problems are caused by configuration issues or unusual combinations and/or new features.

In any case you must generate supout file on this version after you have experienced some kind of problem and send it to support@mikrotik.com. We will investigate each separate case and try to find reason and solution. Even if you will downgrade and use older version still generate supout file, send it to support and then downgrade.

Since release there are only 7 posts and not all of them are negative. You can not say that version is full of bugs if one particular issue appears.
that routes works in 6.35 but not in 6.35.1
MTCNA MTCRE MTCTCE MTCUME MTCWE MTCIPv6E MTCINE
 
andyrosen
just joined
Posts: 2
Joined: Tue Apr 26, 2016 9:29 pm

Re: v6.35.1 [current] is released!

Tue Apr 26, 2016 9:36 pm

It appears that v6.35.1 breaks the OID for /system health voltage monitoring (OID .1.3.6.1.4.1.14988.1.1.3.8.0). This was working in v6.35 (and prior).


[arosen@admin ~]> snmpget -v 2c -c XxXxXx 172.12.23.1 .1.3.6.1.4.1.14988.1.1.3.8.0
Error in packet
Reason: (noSuchName) There is no such variable name in this MIB.
Failed object: SNMPv2-SMI::enterprises.14988.1.1.3.8.0
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35.1 [current] is released!

Tue Apr 26, 2016 11:55 pm

Please report to support@mikrotik.com with your problem description and supout files. As you can see in changelog, there are no SNMP and route changes included in this version.
 
nxs02
Member Candidate
Member Candidate
Posts: 119
Joined: Sat Nov 07, 2015 1:25 pm
Location: Planet Earth

Re: v6.35.1 [current] is released!

Wed Apr 27, 2016 2:52 am

Just upgraded my RB951 to this version... looks good...

Edited:
System >> Health in RB951 looks weird http://www.tiikoni.com/tis/view/?id=7143c0b
Last edited by nxs02 on Wed Apr 27, 2016 3:07 am, edited 1 time in total.
 
pbr3000
Frequent Visitor
Frequent Visitor
Posts: 74
Joined: Fri Jan 08, 2010 7:31 am

Re: v6.35.1 [current] is released!

Wed Apr 27, 2016 2:57 am

It appears that v6.35.1 breaks the OID for /system health voltage monitoring (OID .1.3.6.1.4.1.14988.1.1.3.8.0). This was working in v6.35 (and prior).

[arosen@admin ~]> snmpget -v 2c -c XxXxXx 172.12.23.1 .1.3.6.1.4.1.14988.1.1.3.8.0
Error in packet
Reason: (noSuchName) There is no such variable name in this MIB.
Failed object: SNMPv2-SMI::enterprises.14988.1.1.3.8.0
I can confirm this issue on CCR1009, CCR1016 and RB2011. No problems with CCR1036 and RB450G. The "funny" thing is that it shows fine in /system health print oid...
 
NoWaY
just joined
Posts: 8
Joined: Mon Apr 18, 2016 11:33 pm

Re: v6.35.1 [current] is released!

Wed Apr 27, 2016 7:02 am

SXT LTE after upgrading 6.34.4 =>6.35.1 does not finding LTE interface. One more reboot and LTE is found and after 30 sec is connected to network and working.
SXT LTE with RouterOS 6.34.4 and Firmware 3.32 crashes at least once per day. Looses connection to LTE network (PLME search), or Kernel crash.
With big hope i'm waiting good job from 6.35.1
hello,

I have the same problem with a much high frequency ( around 5-6 times / day and down time 1 hours each and some time i need to disable the interface and enable it again to get linkup back )

and I cannot found a way to bridge the LTE to LAN

any help?
 
User avatar
isolnet
newbie
Posts: 45
Joined: Sat Jan 30, 2016 7:28 am
Location: India

Re: v6.35.1 [current] is released!

Wed Apr 27, 2016 7:11 am

Hi

After upgrade i have facing some problem screenshot attached.
Image
 
spork
just joined
Posts: 11
Joined: Wed Jun 24, 2009 7:59 pm

Re: v6.35.1 [current] is released!

Wed Apr 27, 2016 9:10 am

Dears,
I discovered a problem after the upgrade to 6.35.1(6.35). The problem is related to frozen ssh connections during inactivity.
If I turn off fasttrack, the problem disappears.
affected version: 6.35, 6.35.1
unaffected version: 6.34.1
hw: CCR1072

thank you for yor help

connection parameters:
with FASTTRACK:
Flag: SACF
TCP State: established
Timeout: After connection timeout 24:00:00 than shifts to 00:05:00

without FASTTRACK:
Flag: SAC
TCP State: established
Timeout: After connection holds timeout 24:00:00
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35.1 [current] is released!

Wed Apr 27, 2016 9:50 am

We have managed to reproduce issues with Time Zone in log, SNMP and missing router identity. We are working on fixes. Follow 6.36rc topic:
http://forum.mikrotik.com/viewtopic.php?f=21&t=107422
 
Beone
Member Candidate
Member Candidate
Posts: 243
Joined: Fri Feb 11, 2011 1:11 pm

Re: v6.35.1 [current] is released!

Wed Apr 27, 2016 9:52 am

we can confirm observance that pcq load-balancing stopped working after upgrading to v6.35.1 because of main-routes becoming inactive.

also snmp health monitoring fails since the upgrade.

we are running capsman so we need the fixes in there...

reverting to v6.35 resolves the pcq balancing issue and health monitoring but introduces again loss of caps interfaces

reverting back to v6.35 resolves the problem
 
Ulypka
Frequent Visitor
Frequent Visitor
Posts: 53
Joined: Wed Jan 09, 2013 8:26 am

Re: v6.35.1 [current] is released!

Wed Apr 27, 2016 10:10 am

PCC load balancing does not work after upgrade
routes does not work
Image
I have the same problem :(
[Ticket#2016042766000307]
 
sindudas
newbie
Posts: 28
Joined: Thu Aug 16, 2012 2:59 pm

Re: v6.35.1 [current] is released!

Wed Apr 27, 2016 11:17 am

Upgrading 911G-5HPnD (QRT 5) from 6.34.2 to 6.35.1 using it as Mesh Portal. When upgraded the Mesh interface disappear from Mesh interfaces. Downgrade to 6.35 and it appear again.
Other unit (RB433) connected via mesh + wds slave to the Mesh Portal board (before upgrading the QRT 5 board), upgraded to 6.35.1 and became unreachable with ping, but registered as wds. After downgraded the Mesh Portal unit to 6.35, it becames accessible again running 6.35.1.
 
servizioaudiovideo
just joined
Posts: 3
Joined: Tue Jul 16, 2013 12:30 pm

Re: v6.35.1 [current] is released!

Wed Apr 27, 2016 11:29 am

Hello,
I have a stange problem with this new firmware, on a RB912UAG-2hpnd.
The problem is on LTE interface. When I try to set the option network-mode=auto, I receive the "syntax error".

On old 6.33 firmware, the option work correctly.
[admin@DEMO_R20156248] /interface lte> set network-mode=auto
syntax error (line 1 column 18)
Is a bug or something is changed?
Thanks.
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35.1 [current] is released!

Wed Apr 27, 2016 11:54 am

About policy routing issue - we are not being able to reproduce this kind of situation here locally. Those who have this problem please test:

1) If disable/enable of routes helps;
2) If reboot helps;
3) If disable/enable of gateway interface helps.
 
sindudas
newbie
Posts: 28
Joined: Thu Aug 16, 2012 2:59 pm

Re: v6.35.1 [current] is released!

Wed Apr 27, 2016 12:01 pm

On RB133 (mipsle), using Check For Updates and "channel" current selected, it tells "Latest Version" is 6.35.1, but at www.mikrotik.com/download latest version for MIPSLE is 6.32.4.
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35.1 [current] is released!

Wed Apr 27, 2016 12:09 pm

sindudas - Yes, for mipsle latest version is 6.32.4. Upgrade service does not know about it and shows that latest version is 6.35.1 but does not and will not allow for you to upgrade.
 
User avatar
soonwai
Member Candidate
Member Candidate
Posts: 163
Joined: Mon Feb 06, 2012 10:50 pm
Location: Kuala Lumpur

Re: v6.35.1 [current] is released!

Wed Apr 27, 2016 12:20 pm

Quick question, hopefully.

Aside from wireless repeater feature that's new in wireless-rep, are there any other differences between wireless-rep and wireless-cm2?
 
andriys
Forum Guru
Forum Guru
Posts: 1187
Joined: Thu Nov 24, 2011 1:59 pm
Location: Kharkiv, Ukraine

Re: v6.35.1 [current] is released!

Wed Apr 27, 2016 12:47 pm

Aside from wireless repeater feature that's new in wireless-rep, are there any other differences between wireless-rep and wireless-cm2?
Yes, and quite a lot. Basically, most of the new wireless configuration features mentioned in the 6.35 ChangeLog are only present in the new wireless-rep package.
 
User avatar
ismets
just joined
Posts: 15
Joined: Wed Jun 07, 2006 4:24 pm

Re: v6.35.1 [current] is released!

Wed Apr 27, 2016 2:14 pm

About policy routing issue - we are not being able to reproduce this kind of situation here locally. Those who have this problem please test:

1) If disable/enable of routes helps;
2) If reboot helps;
3) If disable/enable of gateway interface helps.
Same :(
 
irghost
Member Candidate
Member Candidate
Posts: 281
Joined: Sun Feb 21, 2016 1:49 pm

Re: v6.35.1 [current] is released!

Wed Apr 27, 2016 2:32 pm

About policy routing issue - we are not being able to reproduce this kind of situation here locally. Those who have this problem please test:

1) If disable/enable of routes helps;
2) If reboot helps;
3) If disable/enable of gateway interface helps.
NOP does not work
MTCNA MTCRE MTCTCE MTCUME MTCWE MTCIPv6E MTCINE
 
irghost
Member Candidate
Member Candidate
Posts: 281
Joined: Sun Feb 21, 2016 1:49 pm

Re: v6.35.1 [current] is released!

Wed Apr 27, 2016 4:37 pm

same problem in 6.36rc6
Image
MTCNA MTCRE MTCTCE MTCUME MTCWE MTCIPv6E MTCINE
 
irghost
Member Candidate
Member Candidate
Posts: 281
Joined: Sun Feb 21, 2016 1:49 pm

Re: v6.35.1 [current] is released!

Wed Apr 27, 2016 4:38 pm

routes with mark routing does not active after upgrade
MTCNA MTCRE MTCTCE MTCUME MTCWE MTCIPv6E MTCINE
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 5942
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: v6.35.1 [current] is released!

Wed Apr 27, 2016 4:52 pm

We were able to repeat routing mark problem. We will try to fix it as soon as possible.
 
Ivoshiee
Member
Member
Posts: 471
Joined: Sat May 06, 2006 4:11 pm

Re: v6.35.1 [current] is released!

Wed Apr 27, 2016 4:59 pm

After upgrade the RB2011L developed an inability to communicate over gigabit capable port (port started to go up/down). I disabled 1000M speeds for that port. Is it something expected for that release series?
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6616
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: v6.35.1 [current] is released!

Wed Apr 27, 2016 5:14 pm

Ivoshiee what device is connected on the other end of RB2011?
 
Ivoshiee
Member
Member
Posts: 471
Joined: Sat May 06, 2006 4:11 pm

Re: v6.35.1 [current] is released!

Thu Apr 28, 2016 1:31 am

Ivoshiee what device is connected on the other end of RB2011?
It is on Telia provided Inteno. Model is unknown (at the moment), but it has GB capable ports and this box is actually running an OpenWRT.
 
moutian
just joined
Posts: 3
Joined: Sat Mar 15, 2014 3:03 pm

Re: v6.35.1 [current] is released!

Thu Apr 28, 2016 5:29 am

Load balance (NTH) does not work for me any more after upgrade to 6.35.1. Reverted to 6.35 and it works again.

Also 6.35.1 boots much slower than before.
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6616
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: v6.35.1 [current] is released!

Thu Apr 28, 2016 10:39 am

moutian
Please send us support output file from your router, when load balancing is not working.
 
wa4zlw
Member Candidate
Member Candidate
Posts: 169
Joined: Sat Jun 03, 2006 10:37 pm
Location: Blandon, PA
Contact:

Re: v6.35.1 [current] is released!

Thu Apr 28, 2016 12:48 pm

Sergejs---I've asked this before but got no replies....in the CHANGELOG can you please add a date/timestamp for each line item on when these were added and even more info like version affected etc?

Thanks leon
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6616
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: v6.35.1 [current] is released!

Thu Apr 28, 2016 12:53 pm

wa4zlw, this 2016-Apr-25 09:29 is a timestamp for the listed features, when they were added to the specific version.
 
andrei
newbie
Posts: 27
Joined: Wed Oct 29, 2014 9:53 am

Re: v6.35.1 [current] is released!

Thu Apr 28, 2016 2:17 pm

It appears that v6.35.1 breaks the OID for /system health voltage monitoring (OID .1.3.6.1.4.1.14988.1.1.3.8.0). This was working in v6.35 (and prior).

[arosen@admin ~]> snmpget -v 2c -c XxXxXx 172.12.23.1 .1.3.6.1.4.1.14988.1.1.3.8.0
Error in packet
Reason: (noSuchName) There is no such variable name in this MIB.
Failed object: SNMPv2-SMI::enterprises.14988.1.1.3.8.0
I can confirm this issue on CCR1009, CCR1016 and RB2011. No problems with CCR1036 and RB450G. The "funny" thing is that it shows fine in /system health print oid...
I can also confirm this. Something is definitely broken with oids for health monitoring.(at least for RB1100ahx2)
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6616
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: v6.35.1 [current] is released!

Thu Apr 28, 2016 2:25 pm

Guys, thank you very much for the report on health. We were able to repeat the issue and it is being fixed right now.
The next .2 version will include fixes for it.
 
User avatar
Cha0s
Forum Veteran
Forum Veteran
Posts: 908
Joined: Tue Oct 11, 2005 4:53 pm

Re: v6.35.1 [current] is released!

Thu Apr 28, 2016 2:32 pm

While you are at it, how about fixing the health stats on RB2011?

It has been reported multiple times many verions back and it was simply ignored.
http://forum.mikrotik.com/viewtopic.php ... 70#p530170
http://forum.mikrotik.com/viewtopic.php ... ge#p521666
http://forum.mikrotik.com/viewtopic.php ... 75#p520275

Here's RB2011UiAS-RM working perfectly fine:
> /system routerboard print 
       routerboard: yes
             model: 2011UiAS
     serial-number: ***********
     firmware-type: ar9344
  factory-firmware: 3.09
  current-firmware: 3.33
  upgrade-firmware: 3.33
> /system health print 
      voltage: 12.1V
  temperature: 34C
And here's RB2011UAS-RM reporting completely false (or missing) numbers:
> /system routerboard print 
       routerboard: yes
             model: 2011UAS
     serial-number: ************
     firmware-type: ar9344
  factory-firmware: 3.08
  current-firmware: 3.33
  upgrade-firmware: 3.33
> /system health print 
  voltage: 277.1V
Both boards have the exact same configuration.
 
notToNew
Member Candidate
Member Candidate
Posts: 148
Joined: Fri Feb 19, 2016 3:15 pm

Re: v6.35.1 [current] is released!

Thu Apr 28, 2016 2:41 pm

wireless-rep still does not work with an old Intel 2200BG wireless card in AB-Bridge mode.
wireless-cm2 works.

Just a note: I already reported this at http://forum.mikrotik.com/viewtopic.php ... 50#p522747
--------------------------------------------------------------------------------------------
CCR1036-12G-4S, several 952Ui-5ac2nD, ...
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6616
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: v6.35.1 [current] is released!

Thu Apr 28, 2016 2:51 pm

Cha0s, thank you very much for the report. We will see what we can do. For the future report such issues to us directly (support@mikrotik.com).
 
XaTTa6bl4
just joined
Posts: 13
Joined: Wed Dec 16, 2015 10:53 pm

Re: v6.35.1 [current] is released!

Thu Apr 28, 2016 3:19 pm

RB2011, after upgrading 6.35 -> 6.35.1 can't access to IP aliases from the same IP network.
# ADDRESS NETWORK INTERFACE
0 192.168.22.27/28 192.168.22.16 br-22
1 192.168.22.28/28 192.168.22.16 br-22
2 192.168.22.29/28 192.168.22.16 br-22
3 192.168.22.30/28 192.168.22.16 br-22

My address is 192.168.22.25/28 and I can ping (access) only one of aliases. After reboot the router I can ping only one another or nothing...
It look likes as something arp bug.
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6616
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: v6.35.1 [current] is released!

Thu Apr 28, 2016 3:32 pm

XaTTa6bl4 I assume your issue is related to the configuration, not to MikroTik RouterOS 6.35.1 version.
Make support output file from your router, when ping does not work properly and send it to support@mikrotik.com
 
MikroTikFan
Member Candidate
Member Candidate
Posts: 196
Joined: Sat Aug 02, 2014 1:13 am

Re: v6.35.1 [current] is released!

Thu Apr 28, 2016 4:20 pm

I have RB2011UiAS and when I'm testing my connection 100MB I see that CPU is used 80-95%
I'm using PPPoE connection to my provider.

Because of this I have to change my config to not exceed 100% of CPU. Otherwise I can't fully use my speed.
I'm just supposed that this is only on this last version v 6.35.1.
 
camarguesol
just joined
Posts: 3
Joined: Wed Jun 16, 2010 2:01 pm

Re: v6.35.1 [current] is released!

Thu Apr 28, 2016 6:48 pm

Upgraded RB2011UiAS from 6.35 to 6.35.1 and all seemed to work... for a while. Then internet access over bridged pppoe DSL connection started slowing.
Remote Desktop to a client server with RB941 on 6.35 kept on disconnecting and very slow.
The next symptom was Teamviewer refused to connect to client computers from the Computers and Contacts list.
Some web sites maintained speed whilst others were impossibly slow.
RB CPU and memory were within normal parameters.

Removed Heimdal and eliminated DNS as an issue.
Did the usual reboots with no improvement.

Downgraded RB2011 to 6.35 and Teamviewer worked again. RDP to client still disconnecting.
Downgraded clients RB941 to 6.35 and RDP fine - fast and no disconnects

Reinstalled Heimdal - all functions working. RDP and Teamviewer working correctly.

Assumption it is to do with the pppoe interface on the latest release.

We will wait for next release and re test.
 
notToNew
Member Candidate
Member Candidate
Posts: 148
Joined: Fri Feb 19, 2016 3:15 pm

Re: v6.35.1 [current] is released!

Thu Apr 28, 2016 6:55 pm

when restoring a config and space is very low, I get an errormessage, which leads me to a totally differen cause... It says, restoring config is not possible.
Do you create a local tempfile while restoring?
--------------------------------------------------------------------------------------------
CCR1036-12G-4S, several 952Ui-5ac2nD, ...
 
irghost
Member Candidate
Member Candidate
Posts: 281
Joined: Sun Feb 21, 2016 1:49 pm

Re: v6.35.1 [current] is released!

Thu Apr 28, 2016 7:17 pm

I have RB2011UiAS and when I'm testing my connection 100MB I see that CPU is used 80-95%
I'm using PPPoE connection to my provider.

Because of this I have to change my config to not exceed 100% of CPU. Otherwise I can't fully use my speed.
I'm just supposed that this is only on this last version v 6.35.1.
use fasttrack rules
MTCNA MTCRE MTCTCE MTCUME MTCWE MTCIPv6E MTCINE
 
yap99
just joined
Posts: 1
Joined: Thu Apr 28, 2016 7:22 pm

Re: v6.35.1 [current] is released!

Thu Apr 28, 2016 7:36 pm

PCC load balancing does not work after upgrade
routes does not work
Image


:? :( :( : urgent help I have the same problem with load balancing, I have a rb850
 
mrtester

Re: v6.35.1 [current] is released!

Fri Apr 29, 2016 12:14 am

Guys, after I did delete all my routes and firewall rules and added them back it all started to work again. I do not know.. maybe I just did mess up something myself but, just did "/ip route export" and "/ip firewall mangle export" and did remove all routes and mangle rules afterwards. Imported commands from export output and it started to work again.
 
CaVaStra
just joined
Posts: 1
Joined: Fri Apr 29, 2016 1:39 am

Re: v6.35.1 [current] is released!

Fri Apr 29, 2016 1:44 am

we can confirm observance that pcq load-balancing stopped working after upgrading to v6.35.1 because of main-routes becoming inactive.

also snmp health monitoring fails since the upgrade.

we are running capsman so we need the fixes in there...

reverting to v6.35 resolves the pcq balancing issue and health monitoring but introduces again loss of caps interfaces

reverting back to v6.35 resolves the problem
same here: I'm running 3 hap ac here (1 is capsman+cap the other two are cap) and since upgrading to 6.35.1 I see the cap (on the box with capsman running) missing in capsman. rebooting not solving anything, disable/enable caps not working. the wlan interfaces do show and scanning does work. however when turning them on (as local wlan) the default microtik ssid also does not come alive and no logging

did reverting back solve the caps missing issue ?
 
wa4zlw
Member Candidate
Member Candidate
Posts: 169
Joined: Sat Jun 03, 2006 10:37 pm
Location: Blandon, PA
Contact:

Re: v6.35.1 [current] is released!

Fri Apr 29, 2016 1:48 am

wa4zlw, this 2016-Apr-25 09:29 is a timestamp for the listed features, when they were added to the specific version.
I'd like more specific info on each item with a date/timestamp

leon
 
gius64
Member Candidate
Member Candidate
Posts: 204
Joined: Tue Jan 14, 2014 3:43 pm

Re: v6.35.1 [current] is released!

Fri Apr 29, 2016 3:43 am

6.35.1 finally solved fcs errors on AirFiber24 links for me! :D
 
PastuhMedvedey
newbie
Posts: 40
Joined: Fri Jan 13, 2012 1:42 pm
Location: Ukraine

Re: v6.35.1 [current] is released!

Fri Apr 29, 2016 9:27 am

After repeatedly performing the commands :
interface l2tp-server server set enabled=yes
or
interface pptp-server server set enabled=yes

(more than 10 times in a row), pptp and l2tp server stops working,
the connection of customers to them is impossible!
Please fix this error.
RB751U-2HnD, RB2011LS, RB1100AH, RB433, RB411GL, RBSXT, CCR1016
 
Ivoshiee
Member
Member
Posts: 471
Joined: Sat May 06, 2006 4:11 pm

Re: v6.35.1 [current] is released!

Fri Apr 29, 2016 2:04 pm

On a RB433 I have multiple default gateways set and the default gateways with routing mark set went out of use by the v6.35.1 (all these routes were turned blue in winbox) and I was cut off from the network on that box. I've managed to find an older firmware on my laptop and recovered that given functionality. Should I expect that to be fixed or what to think about it?
 
karwos
Frequent Visitor
Frequent Visitor
Posts: 92
Joined: Thu Apr 02, 2015 7:28 pm
Location: Poland

Re: v6.35.1 [current] is released!

Sat Apr 30, 2016 4:27 pm

Please FINALLY FIX SFP DDM INFORMATION READING

On CRS125, there is nothing shown in SFP tab...

HOWEVER i've successfully readen DDM data (and RX/TX power was updated few times a seconds too) today on CRS125.

How it's fixed?
Run CRS125 without SFP module.
Tick system restart, while restarting PLUG SFP module in.
DDM data is there.

If you will reboot CRS now, DDM will not come back anymore
 
hamipopo
just joined
Posts: 4
Joined: Wed Dec 30, 2015 7:16 am

Re: v6.35.1 [current] is released!

Sun May 01, 2016 8:32 am

PPP User (pptp vpn) could not disconnect from routeros from 6.35
 
User avatar
basd
just joined
Posts: 6
Joined: Mon Sep 14, 2015 11:37 am

Re: v6.35.1 [current] is released!

Sun May 01, 2016 2:18 pm

After the upgrade, i lost my vrrp interfaces ...
But this is fix in the next RC.

But i have problem with my site tot site now , they don't pass ant TCP trafic. UDP and ICMP are working fine.
But TCP not
With kind regards,

Bas van den Dikkenberg
 
krisjanis
MikroTik Support
MikroTik Support
Posts: 391
Joined: Tue Feb 05, 2013 5:00 pm

Re: v6.35.1 [current] is released!

Mon May 02, 2016 10:46 am

Please FINALLY FIX SFP DDM INFORMATION READING

On CRS125, there is nothing shown in SFP tab...

HOWEVER i've successfully readen DDM data (and RX/TX power was updated few times a seconds too) today on CRS125.

How it's fixed?
Run CRS125 without SFP module.
Tick system restart, while restarting PLUG SFP module in.
DDM data is there.

If you will reboot CRS now, DDM will not come back anymore
What vendor - model transceiver you use in that CRS125? Possibly it is having some trouble reporting info back to host.
 
igb
just joined
Posts: 7
Joined: Fri Aug 29, 2014 7:05 pm

Re: v6.35.1 [current] is released!

Mon May 02, 2016 11:24 am

The voltage displayed for an RB2011UiAS is not plausible. 1143.7V?
[igb@rb2011-1] /system identity> /system routerboard print 
       routerboard: yes
             model: 2011UiAS
     serial-number: 444702957500
     firmware-type: ar9344
  factory-firmware: 3.09
  current-firmware: 3.18
  upgrade-firmware: 3.33
[igb@rb2011-1] /system identity> /system health print      
  voltage: 1143.7V
[igb@rb2011-1] /system identity> 
Edit to add: fixed by firmware update, so the problem is 6.35.1 (and perhaps earlier, I don't know when this problem started) plus firmware 3.18 (ditto).
[igb@rb2011-1] > /system health print 
      voltage: 24.1V
  temperature: 27C
[igb@rb2011-1] > /system routerboard print 
       routerboard: yes
             model: 2011UiAS
     serial-number: 444702957500
     firmware-type: ar9344
  factory-firmware: 3.09
  current-firmware: 3.33
  upgrade-firmware: 3.33
[igb@rb2011-1] > 
 
xrayd78
just joined
Posts: 1
Joined: Sat Apr 30, 2016 12:31 pm

Re: v6.35.1 [current] is released!

Mon May 02, 2016 6:28 pm

Hi,
we have bis problem with tile CCR-1036-12G-4S.
Last version 6.35.1 is installed, but after 2 days later mikortik pasword is empty. You can login without password! :-(
Ip> Pool is blank.

I try make supout.rif, but can´t find among Files!

Reboot can help, but aftter 2-3 days have the same problem!

What can I do?
 
DSpazman
just joined
Posts: 15
Joined: Fri Jan 23, 2015 1:08 am

Re: v6.35.1 [current] is released!

Mon May 02, 2016 7:46 pm

I had a bug upgrading to this.

I use policy based routing, and had 3 route tables and main.

All my routes in my other route tables besides main went down when I upgraded. They would not show as active.

I had to completely remove them all, and add them all back in with different table names in order to get it all working again.

Even just changing the table names would fix the route, but then when I changed it back to the old table name, it made the route not active again.

As a side note I used interface names for all my routes And there were about 1500 static routes on the router (around 300 per routing table and in the main table.
 
karwos
Frequent Visitor
Frequent Visitor
Posts: 92
Joined: Thu Apr 02, 2015 7:28 pm
Location: Poland

Re: v6.35.1 [current] is released!

Mon May 02, 2016 10:20 pm

Please FINALLY FIX SFP DDM INFORMATION READING

On CRS125, there is nothing shown in SFP tab...

HOWEVER i've successfully readen DDM data (and RX/TX power was updated few times a seconds too) today on CRS125.

How it's fixed?
Run CRS125 without SFP module.
Tick system restart, while restarting PLUG SFP module in.
DDM data is there.

If you will reboot CRS now, DDM will not come back anymore
What vendor - model transceiver you use in that CRS125? Possibly it is having some trouble reporting info back to host.
They are AscentOptics modules, you can get datasheet from there:

http://www.ascentoptics.com/en/dow.asp?Pid=93
 
User avatar
Cha0s
Forum Veteran
Forum Veteran
Posts: 908
Joined: Tue Oct 11, 2005 4:53 pm

Re: v6.35.1 [current] is released!

Mon May 02, 2016 10:34 pm

The voltage displayed for an RB2011UiAS is not plausible. 1143.7V?
[igb@rb2011-1] /system identity> /system routerboard print 
       routerboard: yes
             model: 2011UiAS
     serial-number: 444702957500
     firmware-type: ar9344
  factory-firmware: 3.09
  current-firmware: 3.18
  upgrade-firmware: 3.33
[igb@rb2011-1] /system identity> /system health print      
  voltage: 1143.7V
[igb@rb2011-1] /system identity> 
Edit to add: fixed by firmware update, so the problem is 6.35.1 (and perhaps earlier, I don't know when this problem started) plus firmware 3.18 (ditto).
[igb@rb2011-1] > /system health print 
      voltage: 24.1V
  temperature: 27C
[igb@rb2011-1] > /system routerboard print 
       routerboard: yes
             model: 2011UiAS
     serial-number: 444702957500
     firmware-type: ar9344
  factory-firmware: 3.09
  current-firmware: 3.33
  upgrade-firmware: 3.33
[igb@rb2011-1] > 
The bug started on 6.34.1
http://forum.mikrotik.com/viewtopic.php ... 87#p519887

In my case an RB2011UiAS shows the proper voltage/temperature where an RB2011UAS does not
http://forum.mikrotik.com/viewtopic.php?f=21&t=107686

Both with latest firmware (3.33) and RouterOS v6.35.1.
 
napismizpravu
Member Candidate
Member Candidate
Posts: 135
Joined: Sat Apr 09, 2011 1:27 pm
Location: czech

Re: v6.35.1 - RB433UAH top speed port 506,26Mb/s

Tue May 03, 2016 1:04 am

RB433UAH (6.35.1) ethernet port graf statistic Top Speed 506,26 Mb/s

inserting images prohibited :(
 
irghost
Member Candidate
Member Candidate
Posts: 281
Joined: Sun Feb 21, 2016 1:49 pm

Re: v6.35.1 [current] is released!

Tue May 03, 2016 1:37 pm

where is update? 6.35.2 to fix these bugs
MTCNA MTCRE MTCTCE MTCUME MTCWE MTCIPv6E MTCINE
 
locodog
Frequent Visitor
Frequent Visitor
Posts: 63
Joined: Sun Apr 12, 2015 4:00 am

Re: v6.35.1 [current] is released!

Tue May 03, 2016 7:54 pm

I'm using CCR1036-12G-4S 6.35.1 as PPPoE concentrator, about 100 PPPoE servers and all of them except one are on EoIP tunnels. That one server is running on ether5 interface with exactly same profile and settings as others. User connected to PPPoE server on ether5 interface will disconnect on exactly 5 minutes (it's for testing purposes and I'm only user there, so it's not that big of a problem), there is always 4-5mbps running so it isn't idle. As soon I connect to PPPoE over EoIP (same CPE) it works without problems. This didn't happen on 6.32.2 and error I get is "terminating... link inactive". Can anyone try to reproduce it?

edit: After inserting ether5 under bridge interface (eth5 is only interface in bridge) connection doesn't terminate after 5 minutes. So I guess that it is a bug.
 
prawira
Trainer
Trainer
Posts: 280
Joined: Fri Feb 10, 2006 5:11 am

Re: v6.35.1 [current] is released!

Wed May 04, 2016 5:47 am

i have some of oid functions broken on CRS...
but the same functions still work fine on RB750UP and RB2011.
[admin@Cendana] > sys reso pr
                   uptime: 18h25m32s
                  version: 6.35.1 (stable)
               build-time: Apr/25/2016 09:29:50
              free-memory: 86.5MiB
             total-memory: 128.0MiB
                      cpu: MIPS 74Kc V4.12
                cpu-count: 1
            cpu-frequency: 600MHz
                 cpu-load: 28%
           free-hdd-space: 104.0MiB
          total-hdd-space: 128.0MiB
  write-sect-since-reboot: 177879
         write-sect-total: 100957409
               bad-blocks: 0.8%
        architecture-name: mipsbe
               board-name: CRS125-24G-1S-2HnD
                 platform: MikroTik
[admin@Cendana] > sys heal pr
      voltage: 24.5V
  temperature: 39C
[admin@Cendana] > sys heal pr oid
             active-fan: .1.3.6.1.4.1.14988.1.1.3.9.0
                voltage: .1.3.6.1.4.1.14988.1.1.3.8.0
            temperature: .1.3.6.1.4.1.14988.1.1.3.10.0
  processor-temperature: .1.3.6.1.4.1.14988.1.1.3.11.0
                current: .1.3.6.1.4.1.14988.1.1.3.13.0
      power-consumption: .1.3.6.1.4.1.14988.1.1.3.12.0
             psu1-state: .1.3.6.1.4.1.14988.1.1.3.15.0
             psu2-state: .1.3.6.1.4.1.14988.1.1.3.16.0
while the snmpwalk only show :
.1.3.6.1.4.1.14988.1.1.3.9.0
.1.3.6.1.4.1.14988.1.1.3.14.0
i wanna to attach the picture / screen shoot from my computer but i do now know how to do it.

P
 
prawira
Trainer
Trainer
Posts: 280
Joined: Fri Feb 10, 2006 5:11 am

Re: v6.35.1 [current] is released!

Wed May 04, 2016 6:54 am

'safe mode' under winbox also does not work.
i do connect into my CRS via wireless, open winbox, click safe mode, and disable wlan1
after long wait (more than 15 minutes), the interface wlan1 still disable and i have to connect with wire to enable it again.

P
 
jarda
Forum Guru
Forum Guru
Posts: 7604
Joined: Mon Oct 22, 2012 4:46 pm

Wed May 04, 2016 9:06 am

It is not necessary to double the posts. You already rised this topic few days ago. http://forum.mikrotik.com/viewtopic.php ... 34#p535534
 
prawira
Trainer
Trainer
Posts: 280
Joined: Fri Feb 10, 2006 5:11 am

Re: v6.35.1 [current] is released!

Wed May 04, 2016 10:48 am

dear jarda,

the previous post was made when i use 6.35; not 6.35.1
while everyone talk about .6.35.1, is it wrong if i remind the mikrotik developer to have a look into unworking "safe mode" for winbox ?

P
 
jarda
Forum Guru
Forum Guru
Posts: 7604
Joined: Mon Oct 22, 2012 4:46 pm

Wed May 04, 2016 1:12 pm

Ok. But it seems that the lack of safe mode functionality is not linked specifically to the latest version introduced here but it is general bug.
 
littlebill
Member Candidate
Member Candidate
Posts: 231
Joined: Sat Apr 30, 2011 3:11 am

Re: v6.35.1 [current] is released!

Wed May 04, 2016 9:44 pm

i have a issue with wireless 2.4 which appears to also be in 32.4 none of my 40mhz capable device are going into 40mhz, they are stuck at 20mhz? 5gz dual band ac radio does not have this problem? anyone else seeing this?
 
rdanyk
just joined
Posts: 1
Joined: Thu May 05, 2016 12:32 pm

Re: v6.35.1 [current] is released!

Thu May 05, 2016 12:35 pm

PCC load balancing does not work after upgrade
routes does not work
Image
The same issue! :(
 
krisjanis
MikroTik Support
MikroTik Support
Posts: 391
Joined: Tue Feb 05, 2013 5:00 pm

Re: v6.35.1 [current] is released!

Thu May 05, 2016 2:13 pm

Please FINALLY FIX SFP DDM INFORMATION READING

They are AscentOptics modules, you can get datasheet from there:

http://www.ascentoptics.com/en/dow.asp?Pid=93
I don't have exactly those modules for testing, but I checked with various other vendor ones and no problems with any of them.

As I mentioned possibly modules them selves are acting up sometimes. System can stop attempting to read ddmi if there are to many failed attempts.
 
karwos
Frequent Visitor
Frequent Visitor
Posts: 92
Joined: Thu Apr 02, 2015 7:28 pm
Location: Poland

Re: v6.35.1 [current] is released!

Thu May 05, 2016 2:22 pm

[

As I mentioned possibly modules them selves are acting up sometimes. System can stop attempting to read ddmi if there are to many failed attempts.
These modules DDM works perfectly in other manufacturer equipment (i.e. DASAN networking).
I can send you one module for tests, or make some tests/debug if needed (i can attach logic analyzer to TWI line and give you sniff if needed ;) )
 
aforster
just joined
Posts: 7
Joined: Thu May 05, 2016 2:44 pm

Re: v6.35.1 [current] is released!

Thu May 05, 2016 2:57 pm

Yesterday I made the upgrade on my new router CRS125-24G-1S-2HnD, which I got 1 week ago and came running an old sw version, 6.6.

After the upgrade, the wifi clients keeps disconnecting all the time, even when signal is strong. On the logs, I see tons of for all wifi clients:

00:56:CD:XX:XX:XX@wlan1: disconnected, extensive data loss

I tried to downgrade, but for some reason, after the reboot, it came back with the same 6.35.1. I ried also searching the forum for problems like this, but none indicated what could be happening, and since the problem started after the upgrade...

Thanks for any help.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24268
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.35.1 [current] is released!

Thu May 05, 2016 3:21 pm

Yesterday I made the upgrade on my new router CRS125-24G-1S-2HnD, which I got 1 week ago and came running an old sw version, 6.6.

After the upgrade, the wifi clients keeps disconnecting all the time, even when signal is strong. On the logs, I see tons of for all wifi clients:

00:56:CD:XX:XX:XX@wlan1: disconnected, extensive data loss

I tried to downgrade, but for some reason, after the reboot, it came back with the same 6.35.1. I ried also searching the forum for problems like this, but none indicated what could be happening, and since the problem started after the upgrade...

Thanks for any help.

1. the mentioned log means your signal was not great after all, it means weak signal due to low signal or noise
2. downgrade is done with a special command "/system package downgrade", simple reboot doesn't make downgrade like for upgrades
No answer to your question? How to write posts
 
aforster
just joined
Posts: 7
Joined: Thu May 05, 2016 2:44 pm

Re: v6.35.1 [current] is released!

Thu May 05, 2016 3:34 pm

Yesterday I made the upgrade on my new router CRS125-24G-1S-2HnD, which I got 1 week ago and came running an old sw version, 6.6.

After the upgrade, the wifi clients keeps disconnecting all the time, even when signal is strong. On the logs, I see tons of for all wifi clients:

00:56:CD:XX:XX:XX@wlan1: disconnected, extensive data loss

I tried to downgrade, but for some reason, after the reboot, it came back with the same 6.35.1. I ried also searching the forum for problems like this, but none indicated what could be happening, and since the problem started after the upgrade...

Thanks for any help.

1. the mentioned log means your signal was not great after all, it means weak signal due to low signal or noise
2. downgrade is done with a special command "/system package downgrade", simple reboot doesn't make downgrade like for upgrades
Normis, thank you for your response. Regarding your comments, the wifi signal was working perfectly before the upgrade. Is there any other report of problems with this newer version?

yes, the downgrade attempt was done using that command.. but for some reason, after the rebook, it came back with the same version. Just tried again:

[admin@ho-rt-01] > /system package downgrade
Router will be rebooted. Continue? [y/N]:
y
system will reboot shortly
[admin@ho-rt-01] >

And it still came back like:
MikroTik RouterOS 6.35.1 (c) 1999-2016

Any idea?

Best regards.
 
gotsprings
Forum Veteran
Forum Veteran
Posts: 778
Joined: Mon May 14, 2012 9:30 pm

Re: v6.35.1 [current] is released!

Thu May 05, 2016 4:24 pm

Seeing the time zone problem in the logs on 3011s and hEX. CCR1009 does not have the issue.
"It ain't what you don't know that gets you into trouble. It's what you know for sure that just ain't so."
Mark Twain
 
Marino
Frequent Visitor
Frequent Visitor
Posts: 53
Joined: Sun Jun 14, 2015 7:26 pm

Re: v6.35.1 [current] is released!

Thu May 05, 2016 5:51 pm

Did you upload the old firmware version first to the files area?
Yesterday I made the upgrade on my new router CRS125-24G-1S-2HnD, which I got 1 week ago and came running an old sw version, 6.6.

After the upgrade, the wifi clients keeps disconnecting all the time, even when signal is strong. On the logs, I see tons of for all wifi clients:

00:56:CD:XX:XX:XX@wlan1: disconnected, extensive data loss

I tried to downgrade, but for some reason, after the reboot, it came back with the same 6.35.1. I ried also searching the forum for problems like this, but none indicated what could be happening, and since the problem started after the upgrade...

Thanks for any help.

1. the mentioned log means your signal was not great after all, it means weak signal due to low signal or noise
2. downgrade is done with a special command "/system package downgrade", simple reboot doesn't make downgrade like for upgrades
Normis, thank you for your response. Regarding your comments, the wifi signal was working perfectly before the upgrade. Is there any other report of problems with this newer version?

yes, the downgrade attempt was done using that command.. but for some reason, after the rebook, it came back with the same version. Just tried again:

[admin@ho-rt-01] > /system package downgrade
Router will be rebooted. Continue? [y/N]:
y
system will reboot shortly
[admin@ho-rt-01] >

And it still came back like:
MikroTik RouterOS 6.35.1 (c) 1999-2016

Any idea?

Best regards.
 
aforster
just joined
Posts: 7
Joined: Thu May 05, 2016 2:44 pm

Re: v6.35.1 [current] is released!

Thu May 05, 2016 6:21 pm

Did you upload the old firmware version first to the files area?
Now I feel stupid.. haha

No, I didn't know I should (since I had not deleted anything, I thought it was there already and documentation I found didn't say anything about that).

But that gave me the direction already. Thank you :-)
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.35.1 [current] is released!

Fri May 06, 2016 10:20 am

Who is online

Users browsing this forum: No registered users and 17 guests