Community discussions

 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

v6.37rc [release candidate] is released, only one wireless package!

Thu Jul 21, 2016 11:49 am

What's new in 6.37rc4 (2016-Jul-21 07:17):

Wireless is now unified to a single "wireless" package.
Update on some package configurations is dangerous!!!

*) wireless - "wireless-rep" renamed to "wireless";
*) wireless - "wireless-cm2" discontinued, uninstall it before update;
*) wireless - "wireless" package included in bundle "routeros" package;
*) check-for-updates - with bundle "routeros" package, will replace wireless package automatically;
*) check-for-updates - with one standalone wireless package, will replace wireless package automatically;
*) check-for-updates - with two or more standalone wireless packages, will result in no wireless packages installed, uninstall extra packages first;
*) ccr/crs - fixed SFP+ interface ddmi info reporting function. Info is now refreshed on regular intervals.
*) dude - (changes discussed here: http://forum.mikrotik.com/viewtopic.php?f=8&t=110424 );
*) ovpn - add special exception route for tunnel itself when using add-default-route;
*) ping - fixed freezing on "not running" interfaces;
*) resource - fixed free-memory reporting after disk eject;
*) x86 - fixed crash when igmp-proxy interface becomes "not running" while passing traffic;

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1814
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Jul 21, 2016 2:23 pm

*) wireless - "wireless-rep" renamed to "wireless";
GREAT news ☺
*) ccr/crs - fixed SFP+ interface ddmi info reporting function. Info is now refreshed on regular intervals
Even better news !
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
User avatar
kometchtech
Member Candidate
Member Candidate
Posts: 194
Joined: Sat Jun 15, 2013 4:25 am
Location: Japan
Contact:

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Jul 21, 2016 8:10 pm

Hi, MT support

Check for update cannot download the rc version of the mips and ARM files would be forgotten place?

My best regards.
--
Routerboard Users Group JP
http://www.rb-ug.jp/
CCR1009-8G-1S-1S+, RB750Gr3, CRS226-24G-2S+, RB850Gx2, RB960PGS, CRS317-1G-16S+,
RB2011UAS, CRS125-24G-1S, RB962UiGS-5HacT2HnT, CRS212-1G-10S-1S+, RB3011UiAS
 
User avatar
CyberTod
Long time Member
Long time Member
Posts: 511
Joined: Wed Jan 25, 2012 10:23 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Jul 21, 2016 8:14 pm

*) wireless - "wireless-cm2" discontinued, uninstall it before update;
What does this mean ?
Are we going to be able to update boards that we are connected to via wireless ?
 
JimmyNyholm
Member Candidate
Member Candidate
Posts: 249
Joined: Mon Apr 25, 2016 2:16 am
Location: Sweden

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Jul 21, 2016 10:41 pm

*) wireless - "wireless-cm2" discontinued, uninstall it before update;

As before: Uninstall Error - can not uninstall bundled package (6)

I will try disable and upgrade....
 
minelli
newbie
Posts: 41
Joined: Tue Feb 26, 2008 2:36 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Jul 21, 2016 10:46 pm

When trying to download the version of the site get the following error.
Following is the url to the site sends and error.

Url
http://download.mikrotik.com/all_packages-mipsbe-6.37rc4.zip
Error:
404 - Not Found
 
noby
just joined
Posts: 2
Joined: Thu Jul 21, 2016 10:52 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Jul 21, 2016 11:08 pm

 
JimmyNyholm
Member Candidate
Member Candidate
Posts: 249
Joined: Mon Apr 25, 2016 2:16 am
Location: Sweden

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Jul 21, 2016 11:36 pm

*) wireless - "wireless-cm2" discontinued, uninstall it before update;

As before: Uninstall Error - can not uninstall bundled package (6)

I will try disable and upgrade....
Works. Disable, reboot, upgrade. Please do not write uninstall when that is not possible. or be more specific disable if package is bundled in your setup, uninstall if you have manually installed the package.
 
poizzon
Member Candidate
Member Candidate
Posts: 113
Joined: Fri Jun 21, 2013 12:53 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Jul 21, 2016 11:40 pm

via WinBox GUI ping, got ERROR : no address
--
poi
 
killersoft
Member Candidate
Member Candidate
Posts: 134
Joined: Mon Apr 11, 2011 2:34 pm
Location: Victoria, Australia
Contact:

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Jul 22, 2016 1:01 am

Updated from 6.36 to 6.37rc4 on a RB951-2n..  Did the update over wireless, but of course it didn't not come back.
I see I should have updated it over Ethernet.

I had to manually enable 'Wireless' package and manually enable the wlan1 interface and re-program SSID/frequency etc.. So its like a fresh new interface (nothing was copied over from cm2)

Apart from that the update went ok.
Using it ok at the moment as a test box..
 
MIT, BIT, ITIL, CERT IV Electronics.
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Jul 22, 2016 7:08 am

We are sorry for any inconvenience. As we just released only one wireless package and there were actually four of them in the past, we are still updating our upgrade server so it would work correctly for any case.

When we will fix it only way that you can lose wireless connection will be if you have more than one wireless package outside of bundle package. You have to remove packages manually until only one standalone package is installed. Then (hopefully today) upgrade process must go automatically and you should not see "missing wireless package" errors any more.
 
User avatar
CyberTod
Long time Member
Long time Member
Posts: 511
Joined: Wed Jan 25, 2012 10:23 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Jul 22, 2016 8:34 am

So we are to expect that the problems upgrading over wireless will be limited to the rc versions and when final comes out we will be able to do it with the upgrade process automatically uninstall absolete packages ?
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Jul 22, 2016 9:24 am

1) with bundle "routeros" package, upgrade will replace wireless package automatically;
2) with one standalone wireless package, upgrade will replace wireless package automatically;
3) with two or more standalone wireless packages, upgrade will result in no wireless packages installed, uninstall extra packages first.

So after we will adjust server only thing that you need to check before upgrade is #3,.
 
UsernameMT
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Mon Nov 02, 2015 1:42 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Jul 22, 2016 9:49 am

...
"Address List" - a very good
"Interface List" - excellent
...
Possible to make a "MAC List"?  :shock:
Please!  :)

Best regards!
sorry for my English
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Jul 22, 2016 10:34 am

Upgrade now is fixed and if you have out of bundle single wireless package, then now you should be able to upgrade correctly.

Still - if you have more than one out of bundle wireless package, then you need to remove packages until only one is left and then upgrade.
 
User avatar
CyberTod
Long time Member
Long time Member
Posts: 511
Joined: Wed Jan 25, 2012 10:23 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Jul 22, 2016 11:38 am

Thanks for clarification.
That sounds good enough and for someone like me who always installs bundled package this is a no issue. And I have installed wireless-rep as a separate on a few boards for testing, but only that I can reach by lan.
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Jul 22, 2016 1:47 pm

Version 6.37rc5 has been released.

Fixes in last RC:

*) address-list - allow DNS names with "_" symbol;
*) conntrack - fixed ipv6 timeout display;
*) conntrack - fixed removing icmpv6 connections;
*) dude - (changes discussed here: http://forum.mikrotik.com/viewtopic.php?f=8&t=110424 );
*) export - removed unnecessary "log-prefix" on firewall export;
*) firewall - fixed time based rules on time/timezone changes;

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
UsernameMT
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Mon Nov 02, 2015 1:42 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Jul 22, 2016 2:34 pm

on old versions
this script:
:do {/ip firewall address-list add address=22.22.22.22 comment="Banned-X" list=list-X} on-error={ :put "failed add 22.22.22.22"};
on subsequent executions, return on-error={ :put "failed add 22.22.22.22"}


after version v6.36
this script:
:do {/ip firewall address-list add address=google.com comment="google.com" timeout=0 list="BAN-list"} on-error={:put "failed add google.com, already exists."};
does not return on-error, adds a duplicate (this bug only with the URL,  when adding IP - returns on-error)

PS: when added through WinBox the same problem - it is possible to create a duplicate
Last edited by UsernameMT on Fri Jul 22, 2016 9:59 pm, edited 1 time in total.
sorry for my English
 
ArmanIII
just joined
Posts: 6
Joined: Mon Jul 04, 2016 12:19 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Jul 22, 2016 5:07 pm

Version: 6.37rc5
Ping tool doesn't work from Winbox and WebFig. It shows: ERROR: no address
From terminal ( ping 8.8.8.8 ) it works without problem.
 
kamalrajali
just joined
Posts: 1
Joined: Fri Jul 22, 2016 8:56 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Jul 22, 2016 10:12 pm

wireless package
maya123
 
IntrusDave
Forum Guru
Forum Guru
Posts: 1284
Joined: Fri May 09, 2014 4:36 am
Location: Rancho Cucamonga, CA

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Jul 23, 2016 1:57 am

Version: 6.37rc5
Ping tool doesn't work from Winbox and WebFig. It shows: ERROR: no address
From terminal ( ping 8.8.8.8 ) it works without problem.
I can confirm this. 
David Joyce
Network & Security Engineer
Intrus Technologies, LLC.
Rancho Cucamonga, CA, USA
 
Safic
just joined
Posts: 4
Joined: Sun Jun 19, 2016 10:26 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Jul 23, 2016 12:30 pm

Version: 6.37rc5
Ping tool doesn't work from Winbox and WebFig. It shows: ERROR: no address
From terminal ( ping 8.8.8.8 ) it works without problem.
It's true. In terminal window ping works fine.
 
leroylim
just joined
Posts: 21
Joined: Tue Aug 07, 2012 7:57 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Jul 23, 2016 5:49 pm

The wireless-fp package v6.35.2 is still there after upgrading to 6.37rc.
Trying to uninstall it doesn't work.
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Jul 25, 2016 8:34 am

Ping tool in Winbox will be fixed with upcoming 6.37rc versions.
leroylim - Please generate supout file on your device and send it to support@mikrotik.com. Also explain what packages did you have on router before upgrade and how did you perform upgrade.
 
leandrosucesso
just joined
Posts: 1
Joined: Mon Jul 25, 2016 9:40 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Jul 25, 2016 10:06 pm

Help me please, 

I updated my RB2011UiAS-2HnD for version 6.37rc5, then my wireless interface vanished. :(

Im not see my interface wireless in winbox.

Its bug this version?
 
notToNew
Member Candidate
Member Candidate
Posts: 147
Joined: Fri Feb 19, 2016 3:15 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Jul 26, 2016 12:01 pm

After upgrade to 6.35.4 to 6.37rc5, I experienced unreliable Wireless with the new wireless-packet with my samsung galaxy k-zoom cellphone (about s4 hardware).
I got disconnected 3 times in 30 minutes, seeing "packet flood"-errormessages in the log.
The Sony-phone from my wife worked without any issues.
My Sonos-Wireless-Multiroom-Speakers also had problems and reconnected often.
An older Laptop with an intel 2200BG even did not get any IP-Adress.

I downgraded to 6.36 with wireless-cm2, where both Cellphones, Sonos and the old Laptop worked again, so i hope you still maintain old
versions with wireless-cm2-package for a long time.

Edit1: Added my olf FW version
--------------------------------------------------------------------------------------------
CCR1036-12G-4S, several 952Ui-5ac2nD, ...
 
notToNew
Member Candidate
Member Candidate
Posts: 147
Joined: Fri Feb 19, 2016 3:15 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Jul 26, 2016 5:35 pm

I have a feature-request: Let a Firewall-Rule directly run a Script. (action=run-script)

Currently i have 2 choices:
1. Add an ip to a list and scan the lists for an added IP with an scheduled-script
2. parse the LOG

I do need it for example for automatically sending WOL-packets when acessing the nas from external.
--------------------------------------------------------------------------------------------
CCR1036-12G-4S, several 952Ui-5ac2nD, ...
 
pank
just joined
Posts: 1
Joined: Tue Jul 26, 2016 6:15 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Jul 26, 2016 6:39 pm

Update RB2011UiAS-2HnD to 6.37rc5,
old wireless-fp still there, can not uninstall (mark Uninstall, reboot, still there)
wireless can not enable (mark Enable, reboot, still disabled)

At first, I update it to 6.36, but wireless interface gone because wireless package can not enable,
I tried 6.37rc5 further, same situation.

After downgrade to 6.35.4, wireless back.
 
UsernameMT
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Mon Nov 02, 2015 1:42 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Jul 27, 2016 1:17 pm

Please, create v6.36.1 from bug fix:
http://forum.mikrotik.com/viewtopic.php ... 25#p548501
:(
sorry for my English
 
raffav
Member Candidate
Member Candidate
Posts: 288
Joined: Wed Oct 24, 2012 4:40 am

Re: RE: Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Jul 27, 2016 1:35 pm

Please, create v6.36.1 from bug fix:
http://forum.mikrotik.com/viewtopic.php ... 25#p548501
:(
Hi
Until what version your script worked?


Enviado de meu XT1580 usando Tapatalk
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24142
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Jul 27, 2016 2:00 pm

Note, there will be only one “wireless” package in the next RouterOS v6.37. 

a) If using bundle package (routeros-xx.npk):
To upgrade, click "Check for updates" at /system package in your RouterOS configuration interface, or head to our download page: http://www.mikrotik.com/download

b) If you are not using “routeros” bundle package and have two wireless packages installed, uninstall one wireless package before upgrade to 6.37. For other cases simply upgrade to 6.37 version.
No answer to your question? How to write posts
 
UsernameMT
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Mon Nov 02, 2015 1:42 pm

Re: RE: Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Jul 27, 2016 2:05 pm

Hi 
Until what version your script worked?
in version 6.36 added
What's new in 6.36 (2016-Jul-20 14:09):

*) firewall - allow to add domain name to address-lists (dynamic entries for resolved addresses will be added to specified list);
but MikrotikTeam, forgot :) to add this new feature return "on-error=", if there is already such an entry in the address-lists (so creates duplicates in address-lists). 
It is only when adding URL.


try it yourself to run the script several times on version 6.36:
:do {/ip firewall address-list add address=google.com comment="google.com" timeout=0 list="BAN-list"} on-error={:put "failed add google.com, already exists."};
it work bad - creates duplicate entries in the address list.


Now try this script
:do {/ip firewall address-list add address=22.22.22.22 comment="Banned-X" list="list-X"} on-error={ :put "failed add 22.22.22.22"};
it works good, this script creates only one entry in the address-lists
sorry for my English
 
TonyJr
Member Candidate
Member Candidate
Posts: 198
Joined: Sat Nov 12, 2011 1:30 am
Location: UK
Contact:

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Jul 27, 2016 8:29 pm

Hello,

I have just performed an upgrade from 6.36 to 6.37rc5, original packages were the routeros bundle with combined wireless-cm2 disabled, and the separate wireless-rep package installed and enabled.

The process works fine, however it takes approximately four times longer to complete. I was wondering if it had gone into a reboot loop but luckily I was patient. Would it be worth writing that the upgrade process may take longer than usual when dealing with the wireless package 'automatic migration', in the release notes?

[edit] I used the
/s p u d
and
 /s p u i
commands i.e. automatic upgrade rather than the manual process.

TonyJr
 
andreat
just joined
Posts: 3
Joined: Thu Jul 28, 2016 10:51 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Jul 28, 2016 11:05 am

Hello,
I've some features requests  (don't know if this is the right place to post them):
  1.  If I place the same device in two (or more) differents network maps, this device shouldn't be polled twice (or more times), one time per every map.
  2. If I disable a networkmap actually dude keeps polling and colling data for this map rather than pausing everything.
  3. Bring back web interface.
  4. Android client.
Thanks !
 
notToNew
Member Candidate
Member Candidate
Posts: 147
Joined: Fri Feb 19, 2016 3:15 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Jul 28, 2016 1:00 pm

Hello,
I've some features requests  (don't know if this is the right place to post them):
Hi, I think, this ist the better place for dude-postings: http://forum.mikrotik.com/viewtopic.php?f=8&t=110424
--------------------------------------------------------------------------------------------
CCR1036-12G-4S, several 952Ui-5ac2nD, ...
 
andreat
just joined
Posts: 3
Joined: Thu Jul 28, 2016 10:51 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Jul 28, 2016 2:08 pm

Hello,
I've some features requests  (don't know if this is the right place to post them):
Hi, I think, this ist the better place for dude-postings: http://forum.mikrotik.com/viewtopic.php?f=8&t=110424
Thanks!
 
User avatar
docmarius
Forum Guru
Forum Guru
Posts: 1218
Joined: Sat Nov 06, 2010 12:04 pm
Location: Timisoara, Romania
Contact:

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Jul 28, 2016 4:23 pm

Following the instruction for the single bundle upgrade one still will loose their wireless configuration, since the wireless package is disabled by default in RC5.

To be able to recover it do the following steps:
1. Make sure you use wireless-cm2 and have no other wireless package outside the bundle
2. Create a backup under files->backup
3. Upgrade via ethernet
4. Enable the wireless package - you will get some disabled wireless interface(s)
5. Restore the previous backed up config
You should now have your old configuration back and working with the "wireless" package

@MT: It would be useful to release a 6.36.x bundle containing 2 wireless packages. The original "wireless-cm2" package AND the same cm2 renamed to "wireless". Then it would be easy just to enable "wireless" and disable "wireless-cm2". After the reboot one would have a working wireless config using the "wireless" package. After that, one could upgrade the bundle to 6.37 without any issues and everything could be done via WiFi without loosing access.
Torturing CCR1009-7G-1C-1S+, RB450G, RB750GL, RB951G-2HnD, RB960PGS, RB260GSP, OmniTIK 5HnD and NetMetal 922UAGS-5HPacD + R11e-5HnD in my home network.
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Jul 29, 2016 11:15 am

Caution, if you are running routeros (bundle) with multiple wireless packages, install 6.36 version before upgrade to 6.37rc.

Version 6.37rc10 has been released.

>>> IMPORTANT! WIRELESS PACKAGE CHANGES:

If you are not using “routeros” bundle package and have two wireless packages installed,
uninstall one wireless package before upgrade to 6.37. For other cases simply upgrade to
6.37 version.

There will be only one “wireless” package in RouterOS v6.37. If using bundle package to
upgrade, click "Check for updates" in your RouterOS configuration interface, or head to
our download page: http://www.mikrotik.com/download.

>>> IMPORTANT! DFS MODE CHANGES:

DFS mode setting is removed, and by default becomes forced to “dfs=radar-detect” for all
devices that use radar frequencies. If your client devices use a scan list with a few
specific frequencies that could conflict with radar frequencies, you could lose the
connection. It is recommended to widen the scan list range, use default scan list, or
change the AP frequency

Changes since 6.37rc5:

!) dude - from now on dude will use winbox port and it will be changed automatically both in client loader and agent configuration.
!) wireless - DFS option is removed and forced to "dfs=radar-detect";
!) console - dfs-mode setting does not exist any more and all scripts with such setting will not be executed;
*) bridge - fixed kernel failure when set-priority action was used in bridge firewall;
*) dns - avoid unnecessary static entry saving in storage;
*) dude - (changes discussed here: http://forum.mikrotik.com/viewtopic.php?f=8&t=110424);
*) email - increased time which email tool can spend while sending message;
*) ethernet - added support for LAN9514 ethernet dongle;
*) firewall - check for duplicates when domain name is used in address field;
*) lte - added ability to send/receive sms using '/tool sms';
*) lte - added Pantech UML295, Vodafone K4201-Z, ZTE MF823/MF831 support;
*) lte - fixed access technology update;
*) lte - fixed at chat condition storage;
*) lte - fixed ip activation when CREG (circuit switched) state remains in not registered state;
*) modem - added dlink dwm-157 D support;
*) sms - moved incorrectly logged message from async to gsm topic;
*) sms - report error when unsupported modem is being used;
*) snmp - added script table which executes script and returns it's output on get request;
*) snmp - fixed packet corruption when multiple trap-targets were used;
*) tile - fixed rare kernel crash when fastpath is being active;
*) tile - fixed rare kernel crash when usb device is being attached;
*) traffic-flow - fixed kernel failure when traffic-flow target uses small mtu;
*) upnp - updated to make it work with more UPnP implementations (for example, latest Skype);
*) upnp - fixed nat rule dst-port by making it visible again;
*) vrrp - fixed transition to backup state when ipv6 mode and equal priorities are used;
*) wireless - display DFS flag in country info;

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
andriys
Forum Guru
Forum Guru
Posts: 1143
Joined: Thu Nov 24, 2011 1:59 pm
Location: Kharkiv, Ukraine

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Jul 29, 2016 11:48 am

DFS mode setting is removed, and by default becomes forced to “dfs=radar-detect” for all
devices that use radar frequencies.
Does it mean that frequency option suddenly became useless for "all devices that use radar frequencies"? I.e. no chance to select band manually?
 
uldis
MikroTik Support
MikroTik Support
Posts: 3424
Joined: Mon May 31, 2004 2:55 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Jul 29, 2016 12:02 pm

DFS mode setting is removed, and by default becomes forced to “dfs=radar-detect” for all
devices that use radar frequencies.
Does it mean that frequency option suddenly became useless for "all devices that use radar frequencies"? I.e. no chance to select band manually?
If in the 'frequency' field you had frequency that isn't in the radar frequency range then nothing will change - it will still use that frequency. 

If in the 'frequency' field you had frequency that is in the radar frequency range then AP will start to look for radar in that specified frequency. If the radar is not detected then it will continue use that frequency. If a radar is detected, it will use the scan-list setting to look for a new frequency in the frequency list. If it selects a radar frequency range, it will start detecting the radar and if no radar is found it will start to work there.
 
zajadacz
just joined
Posts: 18
Joined: Fri Jul 29, 2016 12:30 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Jul 29, 2016 12:35 pm

What if I use routerboard in the country that does not requires use of DFS (eg. Uzbekistan)?
Will Mikrotik force use of DFS in such situations?
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24142
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Jul 29, 2016 12:43 pm

What if I use routerboard in the country that does not requires use of DFS (eg. Uzbekistan)?
Will Mikrotik force use of DFS in such situations?
Check "country info" command in the console to see if your country has any DFS frequencies. If it does not have, you will not be affected in any way. For example:
/interface wireless info country-info uzbekistan
No answer to your question? How to write posts
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1721
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Jul 29, 2016 12:45 pm

That changelog thing is starting to get out of hand....

Are there any plans for mandatory county specification, or automatic discovery via /ip cloud?
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24142
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Jul 29, 2016 1:13 pm

It is your own responsibility to use correct country setting. Automatic discovery is never reliable, if you use IPv6 or VPN. 
No answer to your question? How to write posts
 
User avatar
docmarius
Forum Guru
Forum Guru
Posts: 1218
Joined: Sat Nov 06, 2010 12:04 pm
Location: Timisoara, Romania
Contact:

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Jul 29, 2016 1:15 pm

Please no automatic stuff. You can not cover all situations!
Torturing CCR1009-7G-1C-1S+, RB450G, RB750GL, RB951G-2HnD, RB960PGS, RB260GSP, OmniTIK 5HnD and NetMetal 922UAGS-5HPacD + R11e-5HnD in my home network.
 
raffav
Member Candidate
Member Candidate
Posts: 288
Joined: Wed Oct 24, 2012 4:40 am

Re: RE: Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Jul 29, 2016 2:12 pm

It is your own responsibility to use correct country setting. Automatic discovery is never reliable, if you use IPv6 or VPN. 
That rc, fix the ping tool bug?
Because isn't on the changelog

Enviado de meu XT1580 usando Tapatalk
 
zichovsky
just joined
Posts: 6
Joined: Wed Sep 08, 2010 3:23 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Jul 29, 2016 2:20 pm

DFS mode setting is removed, and by default becomes forced to “dfs=radar-detect” for all
devices that use radar frequencies. If your client devices use a scan list with a few
This is realy bad decision. Hoopefully it will not be backported, so 6.36 will be last usable ROS.
"radar-detect" currently react on ANY interference on same chanel (does not matter if it realy is radar or only other wireless network), so any AP on open space (radio tower) with "radar-detect" enabled will end in endless frequency search loop, even when there is realy no radar :-(

I hope taht there will be country "other" (as concurrent manufactures have) with full spectrum width available and without DFS.
Let people, who install your devices, decide whether on that specific site is DFS needed (if it could interfere with radar) or not. In fact, it is their responsibility againt local authorities.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24142
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Jul 29, 2016 2:21 pm

 with "radar-detect" enabled will end in endless frequency search loop, even when there is realy no radar
That is not true. All countries in the EU, and the USA should have already been using this setting for a long time, and there are no problems like you describe. 
I hope taht there will be country "other"
RouterOS already has a superchannel mode that does exactly this. 
No answer to your question? How to write posts
 
MartijnVdS
Frequent Visitor
Frequent Visitor
Posts: 93
Joined: Wed Aug 13, 2014 9:36 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Jul 29, 2016 2:28 pm

 with "radar-detect" enabled will end in endless frequency search loop, even when there is realy no radar
That is not true. All countries in the EU, and the USA should have already been using this setting for a long time, and there are no problems like you describe. 
The only thing I've experienced that's similar to the described problem is the fact that the AP doesn't come back immediately after config changes, but does a round of radar detection first (which can take a few minutes). But as far as I know, that's also part of the official regulations (and how often do you change AP interface settings anyway?)
 
zichovsky
just joined
Posts: 6
Joined: Wed Sep 08, 2010 3:23 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Jul 29, 2016 2:29 pm

 with "radar-detect" enabled will end in endless frequency search loop, even when there is realy no radar
That is not true. All countries in the EU, and the USA should have already been using this setting for a long time, and there are no problems like you describe. 
There are no problems, because all switched dfs to off :)
Yes, you are right that (legaly) in EU and USA it should be set to on, but as far I know, every local provider (CZ) have switched dfs off because of behavior I've described. (And does not matter if they use Mikrotik, Ubiquity, Cambium or anything other.)
 
User avatar
docmarius
Forum Guru
Forum Guru
Posts: 1218
Joined: Sat Nov 06, 2010 12:04 pm
Location: Timisoara, Romania
Contact:

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Jul 29, 2016 2:33 pm

I'm still wondering who that genius that decided to overlap weather radar with ISM was.
Torturing CCR1009-7G-1C-1S+, RB450G, RB750GL, RB951G-2HnD, RB960PGS, RB260GSP, OmniTIK 5HnD and NetMetal 922UAGS-5HPacD + R11e-5HnD in my home network.
 
Zorro
Long time Member
Long time Member
Posts: 676
Joined: Wed Apr 16, 2014 2:43 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Jul 29, 2016 3:42 pm

weather radars isn't worst thing. there was some air traffic radars sometimes there too.
and in some regions - paramedics used that band for walkie-talkie(&in their cars).
i think FCC-alike enforcements should apply to their jurisdictions(which is MT approach so far), not attempts to enforce/lock-down "on global scale" something on all reachable/affected vendors.
 
napismizpravu
Member Candidate
Member Candidate
Posts: 135
Joined: Sat Apr 09, 2011 1:27 pm
Location: czech

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Jul 29, 2016 4:59 pm

DFS (radar detect always) > bad decision 
 
jarda
Forum Guru
Forum Guru
Posts: 7602
Joined: Mon Oct 22, 2012 4:46 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Jul 29, 2016 5:42 pm

What is the business reason to force the DFS on? Mikrotik should explain it really in details. There are rules that when radar is detected, the Ap should lower its tx power, sometimes, so there is not really necessary to leave the frequency. When radar is stopped, it can revert the tx power back to previous legal limit. How this is supported?

What if I take care about the weather radars and have already my radios correctly set from the real tx power point of view and positively know that they do not have any influence on the weather radars... Why the link should be dropped down just due to false positive radar detection? To whom it helps?
 
HaQs
Member Candidate
Member Candidate
Posts: 153
Joined: Sat Oct 20, 2007 3:26 pm
Location: POLAND

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Jul 29, 2016 8:38 pm

DFS (radar detect always) > bad decision 
Very bad
 
IntrusDave
Forum Guru
Forum Guru
Posts: 1284
Joined: Fri May 09, 2014 4:36 am
Location: Rancho Cucamonga, CA

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Jul 29, 2016 9:54 pm

On 922UAGS-5HPacD, the Current TX Power no longer displaying anything. 
David Joyce
Network & Security Engineer
Intrus Technologies, LLC.
Rancho Cucamonga, CA, USA
 
netwpl
newbie
Posts: 25
Joined: Fri Jun 22, 2012 8:09 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Jul 29, 2016 10:53 pm

After upgrade to 6.35.4 to 6.37rc5, I experienced unreliable Wireless with the new wireless-packet with my samsung galaxy k-zoom cellphone (about s4 hardware).
I got disconnected 3 times in 30 minutes, seeing "packet flood"-errormessages in the log.
The Sony-phone from my wife worked without any issues.
My Sonos-Wireless-Multiroom-Speakers also had problems and reconnected often.
An older Laptop with an intel 2200BG even did not get any IP-Adress.

I downgraded to 6.36 with wireless-cm2, where both Cellphones, Sonos and the old Laptop worked again, so i hope you still maintain old
versions with wireless-cm2-package for a long time.
same problem here! probably this happens since MT release the wireless-rep package.
OLD Phones like LG3 cant connect or if they can, they get about 1-2Mbit!
NEWer Phones like my Samsung G S7 edge works flawless.
i have now downgraded all my routers to 6.36 and wireless-cm package and everything works like a charm..
anyone can tell me whats wrong ? my 6.36 and wireless-cm config works:
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa-psk,wpa2-psk eap-methods="" group-ciphers=tkip,aes-ccm group-key-update=30m interim-update=0s \
    management-protection=disabled management-protection-key="" mode=dynamic-keys mschapv2-password="" mschapv2-username="" name=default radius-eap-accounting=\
    no radius-mac-accounting=no radius-mac-authentication=no radius-mac-caching=disabled radius-mac-format=XX:XX:XX:XX:XX:XX radius-mac-mode=as-username \
    static-algo-0=none static-algo-1=none static-algo-2=none static-algo-3=none static-key-0="" static-key-1="" static-key-2="" static-key-3="" \
    static-sta-private-algo=none static-sta-private-key="" static-transmit-key=key-0 supplicant-identity=MikroTik tls-certificate=none tls-mode=no-certificates \
    unicast-ciphers=tkip,aes-ccm wpa-pre-shared-key=iwan2807 wpa2-pre-shared-key=....


/interface wireless
set [ find default-name=wlan1 ] adaptive-noise-immunity=none allow-sharedkey=no ampdu-priorities=0,1,2,3,4,5,6,7 amsdu-limit=8192 amsdu-threshold=8192 \
    antenna-gain=0 area="" arp=enabled arp-timeout=auto band=2ghz-b/g/n basic-rates-a/g=6Mbps basic-rates-b=1Mbps bridge-mode=enabled channel-width=20/40mh
    compression=no country=austria default-ap-tx-limit=0 default-authentication=yes default-client-tx-limit=0 default-forwarding=yes dfs-mode=none \
    disable-running-check=no disabled=no disconnect-timeout=3s distance=indoors frame-lifetime=0 frequency=auto frequency-mode=regulatory-domain \
    frequency-offset=0 guard-interval=any hide-ssid=no ht-basic-mcs=mcs-0,mcs-1,mcs-2,mcs-3,mcs-4,mcs-5,mcs-6,mcs-7 ht-supported-mcs="mcs-0,mcs-1,mcs-2,mcs
    -4,mcs-5,mcs-6,mcs-7,mcs-8,mcs-9,mcs-10,mcs-11,mcs-12,mcs-13,mcs-14,mcs-15,mcs-16,mcs-17,mcs-18,mcs-19,mcs-20,mcs-21,mcs-22,mcs-23" \
    hw-fragmentation-threshold=disabled hw-protection-mode=none hw-protection-threshold=0 hw-retries=7 interworking-profile=disabled keepalive-frames=enabl
    l2mtu=1600 mac-address=D4:CA:6D:A8:A0:05 max-station-count=2007 mode=ap-bridge mtu=1500 multicast-buffering=enabled multicast-helper=full name=wlan1 \
    noise-floor-threshold=default nv2-cell-radius=30 nv2-noise-floor-offset=default nv2-preshared-key="" nv2-qos=default nv2-queue-count=2 nv2-security=dis
    on-fail-retry-time=100ms preamble-mode=both radio-name=D4CA6DA8A005 rate-selection=advanced rate-set=default rx-chains=0,1 scan-list=default \
    security-profile=default ssid=... station-bridge-clone-mac=00:00:00:00:00:00 supported-rates-a/g=6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mb
    supported-rates-b=1Mbps,2Mbps,5.5Mbps,11Mbps tdma-period-size=2 tx-chains=0,1 tx-power-mode=default update-stats-interval=disabled vlan-id=1 vlan-mode=
    no-tag wds-cost-range=50-150 wds-default-bridge=none wds-default-cost=100 wds-ignore-ssid=no wds-mode=disabled wireless-protocol=802.11 wmm-support=ena
    wps-mode=push-button
/interface wireless manual-tx-power-table
set wlan1 manual-tx-powers="1Mbps:17,2Mbps:17,5.5Mbps:17,11Mbps:17,6Mbps:17,9Mbps:17,12Mbps:17,18Mbps:17,24Mbps:17,36Mbps:17,48Mbps:17,54Mbps:17,HT20-0:17,
    :17,HT20-2:17,HT20-3:17,HT20-4:17,HT20-5:17,HT20-6:17,HT20-7:17,HT40-0:17,HT40-1:17,HT40-2:17,HT40-3:17,HT40-4:17,HT40-5:17,HT40-6:17,HT40-7:17"
/interface wireless nstreme
set wlan1 disable-csma=no enable-nstreme=no enable-polling=yes framer-limit=3200 framer-policy=none
/interface wireless align
set active-mode=no audio-max=0 audio-min=0 audio-monitor=00:00:00:00:00:00 filter-mac=00:00:00:00:00:00 frame-size=200 frames-per-second=1 receive-all=no \
    ssid-all=no
/interface wireless sniffer
set channel-time=200ms file-limit=10 file-name="" memory-limit=10 multiple-channels=no only-headers=no receive-errors=no streaming-enabled=no \
    streaming-max-rate=0 streaming-server=0.0.0.0
/interface wireless snooper
set channel-time=200ms multiple-channels=yes receive-errors=no





 
Zorro
Long time Member
Long time Member
Posts: 676
Joined: Wed Apr 16, 2014 2:43 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Jul 30, 2016 12:30 am

since american FCC insisting on and MT depend on american chips and sdk a lot(let alone impact of licensing issues &/or access to relevant IP/patent to use in ROS) - they had no options than to comply.
radar detection isn't bad, just implementation not really flawless, yet. same about DFS itself.
but always better to had option(if you're not under fcc jusrisdiction)to configure things Manually(even temporally to troubleshoot/locate "issues" with links).
 
PtDragon
Frequent Visitor
Frequent Visitor
Posts: 77
Joined: Sun Apr 26, 2009 8:52 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Jul 30, 2016 5:40 am

How radar detect works at all?
How to disable restriction because i don't want it shut the signal in case it senses something that can be not a radar?
Or now for AP i'm stuck with pre-enforcment version forever?
CCR1036-12G-4S +6x100Mbit ^_^
 
marekm
Member Candidate
Member Candidate
Posts: 199
Joined: Tue Feb 01, 2011 11:27 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Jul 30, 2016 11:02 am

Mikrotik, please don't force DFS on those who know what they're doing.  I know the weather radar in my area (near GDN airport) is at 5650 MHz (confirmed by spectral scan - high narrow peak visible), and I never use channels 128 and 132.  DFS disabled, no false positives, no downtime on each wireless settings change, no harm to and from the radar (it works both ways, our 1W vs their 250kW).  Mostly UBNT radios so far, but I was considering using more MT radios because of your (until now) less restrictive policy.
 
User avatar
Bigfoot
Frequent Visitor
Frequent Visitor
Posts: 76
Joined: Sat Jan 15, 2011 10:41 am
Location: South Africa

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Jul 30, 2016 11:14 am

Hi
look like the Ping is not working, On 6.36 it works and on 6,37rc10 not.
Can someone please confirm, :?
Last edited by Bigfoot on Sun Jul 31, 2016 12:08 pm, edited 1 time in total.
 
MartijnVdS
Frequent Visitor
Frequent Visitor
Posts: 93
Joined: Wed Aug 13, 2014 9:36 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Jul 30, 2016 2:10 pm

Mikrotik, please don't force DFS on those who know what they're doing.  I know the weather radar in my area (near GDN airport) is at 5650 MHz (confirmed by spectral scan - high narrow peak visible), and I never use channels 128 and 132.  DFS disabled, no false positives, no downtime on each wireless settings change, no harm to and from the radar (it works both ways, our 1W vs their 250kW).  Mostly UBNT radios so far, but I was considering using more MT radios because of your (until now) less restrictive policy.
You can still make a scan-list with those frequencies excluded, and set the AP to a frequency that's free of radar. DFS shouldn't detect radar on the other frequencies, and not initiate a channel switch.
 
InoX
Forum Guru
Forum Guru
Posts: 1962
Joined: Tue Jan 09, 2007 6:44 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Jul 30, 2016 6:03 pm

!) wireless - DFS option is removed and forced to "dfs=radar-detect";
I have replaced all ubnt radios with mikrotik because of this. Now I will stick to 6.36.
There is a 10min wait time in 5600-5650Mhz and 30min wait time if radar detected. 
Good luck!
 
npero
Member
Member
Posts: 316
Joined: Tue Mar 01, 2005 1:59 pm
Location: Serbia

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Jul 30, 2016 6:34 pm

!) wireless - DFS option is removed and forced to "dfs=radar-detect";
I have replaced all ubnt radios with mikrotik because of this. Now I will stick to 6.36.
There is a 10min wait time in 5600-5650Mhz and 30min wait time if radar detected. 
Good luck!
I not try yet, but if change mode to superchannel and country to no_country DFS is also active ? In my logic must be disabled because no country selected.
 
lekozs
newbie
Posts: 46
Joined: Wed Aug 30, 2006 12:49 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Jul 30, 2016 6:44 pm

Mikrotik, please don't force DFS on those who know what they're doing.  I know the weather radar in my area (near GDN airport) is at 5650 MHz (confirmed by spectral scan - high narrow peak visible), and I never use channels 128 and 132.  DFS disabled, no false positives, no downtime on each wireless settings change, no harm to and from the radar (it works both ways, our 1W vs their 250kW).  Mostly UBNT radios so far, but I was considering using more MT radios because of your (until now) less restrictive policy.
OK...
...is there anybody here, with greater knowledge, who can explain to me, how on earth a 200mW radio, made by MikroTik, could cause interference to a - more than one million times stronger - 250,000W Radar?!?
 
User avatar
Cha0s
Forum Veteran
Forum Veteran
Posts: 890
Joined: Tue Oct 11, 2005 4:53 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Jul 30, 2016 6:53 pm

It would be nice if Mikrotik explained why they introduce (or to be more accurate, remove) features without any apparent reason.

They did it with dynamic entries on 6.36 in address lists (no explanation whatsoever) and now with DFS (again, no explanation whatsoever) despite many users opposing to those changes. :shock:
Especially with address lists, they had plenty of time and complaints to revert it during the RC phase but they completely ignored everyone.

Are they trying to stop us from upgrading to newer versions or what?! :?

Not giving explanations about these moves doesn't help anyone. People that use Mikrotik and Routerboards do it because they know what they want.
It's not some locked down/backdoored ZTE modem-router-coffee maker that our ISP pushed down our throats.
We select this software/hardware for a reason. Mikrotik has to be more transparent to its clients... if they care to keep them that is.
 
Sob
Forum Guru
Forum Guru
Posts: 4545
Joined: Mon Apr 20, 2009 9:11 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Jul 30, 2016 7:29 pm

... how on earth a 200mW radio, made by MikroTik, could cause interference to a - more than one million times stronger - 250,000W Radar?!?
In short, radars are very sensitive. They send strong pulses and listen for much weaker reflected signals. Tiny radios are no match for them when it comes to transmitting power, but they can be stronger than reflected signals. And that's a problem, because it confuses radars. They are getting better at filtering wifi signals, but it's not perfect and probably never will. Unfortunately for wifi users, radars are considered to be primary users of these frequencies. So MikroTik probably has no choice, other than force radar detection where required, otherwise regulators would kick their asses...
People who quote full posts should be spanked with ethernet cable. Some exceptions for multi-topic threads may apply.
 
IntrusDave
Forum Guru
Forum Guru
Posts: 1284
Joined: Fri May 09, 2014 4:36 am
Location: Rancho Cucamonga, CA

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Jul 30, 2016 7:32 pm

If you understand a bit more about DFS, and understand that many countries will ban ALL of a company's products if they do not comply - maybe you will not be so upset about it. Weather and Air Traffic radar covers a lot more area than many people think. 

Dynamic Frequency Selection
DFS is a spectrum-sharing mechanism that allows wireless LANs (WLANs) to coexist with radar systems. It automatically selects a frequency that does not interfere with certain radar systems while operating in the 5 GHz band. DFS is a feature of ETSI BRAN HIPERLAN/2 and IEEE Standard 802.11h.

Overview
In some regions (predominantly Europe), it is important to ensure that WLAN equipment does not interfere with certain radar systems that are the primary users in the 5 GHz band. The DFS feature of the AP software searches for radar pulses in the frequency channel where it is operating, or during the autochannel scan. It constantly monitors errors in the received frames and analyzes the timing patterns for periodicity. If the pattern matches a radar signal, it instructs the WLAN equipment to discontinue operation on that channel as quickly as possible. The WLAN equipment reboots, then begins to operate on another frequency after checking that the new frequency is free of radar signals.

Operation
DFS detects radar interference and moves the wireless network to another frequency with no interference. It maintains a list of channels where radar has been detected in the NOL (non-occupancy list). The AP avoids using these channels for at least 30 minutes after detecting radar on them. When DFS is enabled, the AP:
  • Looks for radar detection before securing a frequency channel.
  • Scans continuously for radar signal patterns during normal operation.
Radar Signal
A conventional radar signal is a burst of pulses of a high frequency signal. When one burst is over, it is repeated after some duration, called sweep time. ITU has defined several different types of radar based on different frequencies, the number of pulses in a burst, and pulse repetition frequency within the burst. The sweep time is a result of radars that slowly rotate through 360 degrees, so that in a 30-second sweep period, the AP may be hit by the radar signal only for fraction of a second. During this hit, the AP sees a few pulses separated by a time interval (called the period), which is anywhere from 250 microseconds to 20 milliseconds. Each pulse can be 2 microseconds or smaller in width.
David Joyce
Network & Security Engineer
Intrus Technologies, LLC.
Rancho Cucamonga, CA, USA
 
diode
newbie
Posts: 32
Joined: Sun Sep 13, 2009 8:40 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Jul 30, 2016 7:37 pm

Hi Mikrotik Gurus,

Is the radar scan active for all channels 100-140 (5500-5700), or just for 120-128 (5600-5640) ? What about channel 52 - 64 ?

will the dfs change also be in 6.36.1 ?

thanks maria !
 
IntrusDave
Forum Guru
Forum Guru
Posts: 1284
Joined: Fri May 09, 2014 4:36 am
Location: Rancho Cucamonga, CA

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Jul 30, 2016 7:37 pm

In short, radars are very sensitive. They send strong pulses and listen for much weaker reflected signals. Tiny radios are no match for them when it comes to transmitting power, but they can be stronger than reflected signals. And that's a problem, because it confuses radars. They are getting better at filtering wifi signals, but it's not perfect and probably never will. Unfortunately for wifi users, radars are considered to be primary users of these frequencies. So MikroTik probably has no choice, other than force radar detection where required, otherwise regulators would kick their asses...
Well stated.
To add to this - Apple has pulled all of their Wireless routers from stores, as the FCC deadline for DFS was July 1.
David Joyce
Network & Security Engineer
Intrus Technologies, LLC.
Rancho Cucamonga, CA, USA
 
IntrusDave
Forum Guru
Forum Guru
Posts: 1284
Joined: Fri May 09, 2014 4:36 am
Location: Rancho Cucamonga, CA

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Jul 30, 2016 7:39 pm

Hi Mikrotik Gurus,

Is the radar scan active for all channels 100-140 (5500-5700), or just for 120-128 (5600-5640) ? What about channel 52 - 64 ?

will the dfs change also be in 6.36.1 ?

thanks maria !
Most of the world requires it on 50~144
https://en.wikipedia.org/wiki/List_of_W ... 29.5B17.5D
David Joyce
Network & Security Engineer
Intrus Technologies, LLC.
Rancho Cucamonga, CA, USA
 
napismizpravu
Member Candidate
Member Candidate
Posts: 135
Joined: Sat Apr 09, 2011 1:27 pm
Location: czech

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Jul 30, 2016 9:07 pm

DFS permanently switched > motivation hack outside the system RouterOS = DFS deactivate + license free

MikroTik lost money or it is well secured antihack, autodestruct routerboard (Inspiration agent 007)?  :lol:

[Google translate]
 
InoX
Forum Guru
Forum Guru
Posts: 1962
Joined: Tue Jan 09, 2007 6:44 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Sun Jul 31, 2016 12:30 am

Who cares about x86 and wireless + DFS?
 
User avatar
MaHr
just joined
Posts: 21
Joined: Wed Apr 22, 2009 2:59 am
Location: Czech Republic

Re: v6.37rc [release candidate] is released, only one wireless package!

Sun Jul 31, 2016 1:27 am

Hi,
I'm trying to test this release and it worked, but I am afraid, that if superchannel option it will be still available, that is it same as DFS-mode=none. For meaningfull use of this feature, must be superchannel feature removed, I think. By the way, radar detecting function working fine. If radar is present in the antenna direction, that is detected and radar channel isn't used for exact time and use next free frequency channel.

But I still get problem with wireless snooper via console, if I run command:
[admin@MikroTik] /interface wireless> snooper snoop wlan1
CHANNEL                           USE        BW NET-COUNT NOISE-FLOOR STA-COUNT
5560/20/a/DP                       0%      0bps         0        -111         0
5580/20/a/DP                       0%      0bps         0        -111         0
5600/20/a/DP                     0.1%   8.8kbps         1        -112         1
5620/20/a/DP                       0%      0bps         0        -112         0
-- [Q quit|D dump|C-z pause|n networks|s stations|down]

and press s I can see station, but without used frequencies

Flags: A - active, N - access-point
 #       FREQ ADDRESS           SIG SNR OF-FREQ OF-TRAF        BW SSID
 0 AN         00:1E:DA:EE:AE:DA -92  20      0%     50%   4.5kbps XXXXXXX
 1 A          00:0C:42:7A:C9:BD -90  22    0.2%    8.2%   8.0kbps
 2 A          4C:5E:0C:84:ED:99 -90  22    1.3%   46.8%  50.1kbps
 3 A          4C:5E:0C:82:6D:E1 -85  27    0.2%    9.8%   9.6kbps
-- [Q quit|D dump|C-z pause|n networks|s stations|down]

or if I press n as networks list is still without frequencies:

 #        FREQ ADDRESS           SSID            STAS OF-FREQ OF-TRAF        BW
 0 AFB         00:1E:DA:EE:AE:DA XXXXXXX            1    0.1%    100%   9.2kbps
-- [Q quit|D dump|C-z pause|n networks|s stations|down]
    
I think, that it worked fine in version 6.19. In column FREQ was frequency presented s ie. 5600MHz, now values are missing, but we are using this for getting automatic information about frequencies of clients and APs. Now we are without this information due this small bug.
Many thanks for solved this.
Martin
 
diode
newbie
Posts: 32
Joined: Sun Sep 13, 2009 8:40 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Aug 01, 2016 2:51 pm

Are there any mikrotik DFS long time users around ?

does the inband monitoring of radar sometimes dedect radars just cause of the damaged pakets a weak link is transmitting on mikrotik ?

damaged pakets -> could be radar pulses -> radar dedected, even if not present

back in 2003, 2004 exactly that was the main problem with DFS, making 5 GHz praktically unusable with Lancom devices. After a few hours radar was dedected on all channels, and link went down. only practical solution was moving to a DFS free country. Since then I dont have any DFS experiences.

BTW, weather radars in austria
5625 Rauchenwarth,NÖ
5600 Feldkirchen,OÖ
5640 Zirbitzkogel,Stmk
5625 Patscherkofel,T
5610 Valluga, T

Weather radar is on channels 120-128 nearly worldwide, in europe you need to stay away from these channels based on DFS2, practically you definitly should if you don't have a channel list of the radars of your country ...

The other radars, that could be theoretically on any channel in austria are from the military, but the austrian military also has the 5,8 GHz ISM band nearly completly alone, besides many other bands.

BW
 
visalink
Frequent Visitor
Frequent Visitor
Posts: 69
Joined: Thu Oct 03, 2013 1:42 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Aug 01, 2016 5:05 pm

please do not include DFS permanently switched in version 6.36.x, probably this will be my last updated.
Last edited by visalink on Tue Aug 02, 2016 3:13 pm, edited 1 time in total.
 
notToNew
Member Candidate
Member Candidate
Posts: 147
Joined: Fri Feb 19, 2016 3:15 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Aug 01, 2016 5:26 pm

Hm, missing the changelog for rc11?!?
--------------------------------------------------------------------------------------------
CCR1036-12G-4S, several 952Ui-5ac2nD, ...
 
pe1chl
Forum Guru
Forum Guru
Posts: 5722
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Aug 01, 2016 9:07 pm

 with "radar-detect" enabled will end in endless frequency search loop, even when there is realy no radar
That is not true. All countries in the EU, and the USA should have already been using this setting for a long time, and there are no problems like you describe. 
If that was true...
We have MikroTik AP in use on a 220m AGL site and the DFS is not stable!
We know the frequency of the local weather radar but when we set the MikroTik to free channel choice and DFS it is
only hopping around and the connection is lost every minute.  It never finds a channel where it will stay.   With DFS off
and a properly chosen channel (far away from the radar) it works OK.
This means (like others have written) we will no longer be able to update past the 6.36 version...
 
Zorro
Long time Member
Long time Member
Posts: 676
Joined: Wed Apr 16, 2014 2:43 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Aug 01, 2016 9:57 pm

 with "radar-detect" enabled will end in endless frequency search loop, even when there is realy no radar
That is not true. All countries in the EU, and the USA should have already been using this setting for a long time, and there are no problems like you describe. 
If that was true...
We have MikroTik AP in use on a 220m AGL site and the DFS is not stable!
We know the frequency of the local weather radar but when we set the MikroTik to free channel choice and DFS it is
only hopping around and the connection is lost every minute.  It never finds a channel where it will stay.   With DFS off
and a properly chosen channel (far away from the radar) it works OK.
This means (like others have written) we will no longer be able to update past the 6.36 version...
in such cases - most customers HAD TO stick with legacy firmware thus.
atleast UNTIL MikroTik improve radar-detection, of course.
thats quite common situation, btw.
even in complteletely radar-free rural areas(say 1200km away from closest industrial instalalation and ~450km from closest (tiny)airport(without radars of Any kind, including weather))its may perform quite jerky and and in urban areas... oh god, its like circus in all-brands routers (not only SOHO gear suffer).
my point is: its perhaps too early move. unsafe, yet to Enforce that. just opinion.
 
 
User avatar
hknet
Frequent Visitor
Frequent Visitor
Posts: 88
Joined: Sun Jul 17, 2016 6:05 pm
Location: Vienna, Austria
Contact:

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Aug 02, 2016 7:20 am

What is the business reason to force the DFS on? Mikrotik should explain it really in details. There are rules that when radar is detected, the Ap should lower its tx power, sometimes, so there is not really necessary to leave the frequency. When radar is stopped, it can revert the tx power back to previous legal limit. How this is supported?

What if I take care about the weather radars and have already my radios correctly set from the real tx power point of view and positively know that they do not have any influence on the weather radars... Why the link should be dropped down just due to false positive radar detection? To whom it helps?
The business reason is simply to stay in business within the EU and USoA. Lots of wireless ISPs were/are using frequencies without taking care of other services running in the same frequency spectrum, therefore legislation is now enacted that wireless devices without frequency protection enforcing will be removed from the markets.
Kindest Regards,
hk
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24142
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Aug 02, 2016 9:06 am

To everyone talking about DFS. 

If your country has no DFS rules, RouterOS will not do anything. Each country has separate DFS config defined. 
If you have some special permission to use the radar frequencies, or there is some other reason you need to turn off DFS and not follow the rules, upon your own risk - don't set a country, or use wireless mode "superchannel". 
No answer to your question? How to write posts
 
jarda
Forum Guru
Forum Guru
Posts: 7602
Joined: Mon Oct 22, 2012 4:46 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Aug 02, 2016 9:10 am

Maybe true but just a speculation. Mikrotik should give real official statement to this. There are already hardlocked device versions for USA and there is also a customizable locker tool available at mikrotik website so dealers can lock devices they are selling to special wireless parameters to fulfil local regulations before the devices are sold. There is no obvious reason to make problems to everyone as many of us wrote here.

So my question again: To whom it helps?
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24142
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Aug 02, 2016 9:12 am

so dealers can lock devices
Can, but don't. Many dealers don't want to install anything, this way, the process is much simplified. 
All devices follow local regulations, if the user sets their country. If the user has reasons to use custom settings, they can use "superchannel". Everyone wins.
No answer to your question? How to write posts
 
jarda
Forum Guru
Forum Guru
Posts: 7602
Joined: Mon Oct 22, 2012 4:46 pm

Re: RE: Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Aug 02, 2016 9:15 am

To everyone talking about DFS. 

If your country has no DFS rules, RouterOS will not do anything. Each country has separate DFS config defined. 
If you have some special permission to use the radar frequencies, or there is some other reason you need to turn off DFS and not follow the rules, upon your own risk - don't set a country, or use wireless mode "superchannel". 
Thank you at least for this.

My previous post was send simultaneously with yours...

How could I switch the DFS on even if it is not mandatory when you fully remove that option...?
 
IntrusDave
Forum Guru
Forum Guru
Posts: 1284
Joined: Fri May 09, 2014 4:36 am
Location: Rancho Cucamonga, CA

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Aug 02, 2016 9:16 am

I think Normis' response was pretty clear. Each country has rules that much be followed, if the products are to be sold in that country. *MOST* countries require DFS in the UNI-II channels. I don't understand why this is a problem for so many people. If you don't want to use DFS, use channels that do not require DFS.
David Joyce
Network & Security Engineer
Intrus Technologies, LLC.
Rancho Cucamonga, CA, USA
 
IntrusDave
Forum Guru
Forum Guru
Posts: 1284
Joined: Fri May 09, 2014 4:36 am
Location: Rancho Cucamonga, CA

Re: RE: Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Aug 02, 2016 9:22 am

How could I switch the DFS on even if it is not mandatory when you fully remove that option...?
I believe Czech Republic is enabled on all channels
/interface wireless info country-info "czech republic" 
  ranges: 5725-5875/a,an20,an40,ac20,ac40,ac80,ac160(14dBm)
          2402-2482/b,g,gn20,gn40(20dBm)
          2417-2457/g-turbo(20dBm)
          5170-5250/a,an20,an40,ac20,ac40,ac80,ac160(20dBm)/passive
          5250-5330/a,an20,an40,ac20,ac40,ac80,ac160(23dBm)/passive
          5490-5710/a,an20,an40,ac20,ac40,ac80,ac160(27dBm)/passive
          5190-5310/a-turbo(20dBm)
          5180-5300/a-turbo(20dBm)
          5520-5680/a-turbo(27dBm)/passive
          5510-5670/a-turbo(27dBm)/passive
          902-927/b,g,g-turbo,gn20,gn40(30dBm)
David Joyce
Network & Security Engineer
Intrus Technologies, LLC.
Rancho Cucamonga, CA, USA
 
Zorro
Long time Member
Long time Member
Posts: 676
Joined: Wed Apr 16, 2014 2:43 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Aug 02, 2016 9:32 am

Maybe true but just a speculation. Mikrotik should give real official statement to this. There are already hardlocked device versions for USA and there is also a customizable locker tool available at mikrotik website so dealers can lock devices they are selling to special wireless parameters to fulfil local regulations before the devices are sold. There is no obvious reason to make problems to everyone as many of us wrote here.

So my question again: To whom it helps?
well just above janisk clearly explained that already i think.
but be aware that setting country/mode, other than actual - you're breaking law and subject of fines/penalties or even inprisonment in most countries.
its ironical that most installations that violate radar scan option(sometimes even with "modded firmware". which isn't simle for SOHO gear, consisting notable percentage in such)are in education and healthcare in EU. and as for disabling DFS whatsoever - its more NA thing(especially in USA), i guess cuz bogus bands/channel list, not recoginised/interoperable with by many devices with DFS enabled.
 
IntrusDave
Forum Guru
Forum Guru
Posts: 1284
Joined: Fri May 09, 2014 4:36 am
Location: Rancho Cucamonga, CA

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Aug 02, 2016 9:48 am

Most devices in the the USA simple don't support the UNI-II channels. Apple recently pulled all of it's wireless routers from retail and online sales because they did not comply with the new FCC rules. On the other hand, because the notebooks may travel the world, they support every channel that that the hardware in them can use. Personally, I use Channel 100 (5500MHz). I use it because no one anywhere near me has hardware that supports it. I also know that the airport that is 5 miles south of me is between 5600 and 5700. 

I think most wireless guys should have an analyzer. The Metageek WiSpy is a great package and will let you visualize radar or any other signals in the 2.4 and 5G range.
David Joyce
Network & Security Engineer
Intrus Technologies, LLC.
Rancho Cucamonga, CA, USA
 
User avatar
docmarius
Forum Guru
Forum Guru
Posts: 1218
Joined: Sat Nov 06, 2010 12:04 pm
Location: Timisoara, Romania
Contact:

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Aug 02, 2016 11:18 am

6.37.rc11:
I confirm NTP is working correctly as a stand alone time source with a GPS receiver.

Good job MT Team :D
Torturing CCR1009-7G-1C-1S+, RB450G, RB750GL, RB951G-2HnD, RB960PGS, RB260GSP, OmniTIK 5HnD and NetMetal 922UAGS-5HPacD + R11e-5HnD in my home network.
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6615
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Aug 02, 2016 1:37 pm

v6.37rc11 was released!

What's new in 6.37rc11 (2016-Aug-01 09:00):

>>> IMPORTANT! WIRELESS PACKAGE CHANGES:

If you are not using "routeros" bundle package and have two wireless packages installed,
uninstall one wireless package before upgrade to 6.37. For other cases simply upgrade to
6.37 version.

There will be only one "wireless" package in RouterOS v6.37. If using bundle package to
upgrade, click "Check for updates" in your RouterOS configuration interface, or head to
our download page: http://www.mikrotik.com/download.

>>> IMPORTANT! DFS MODE CHANGES:

DFS mode setting is removed, and by default becomes forced to "dfs=radar-detect" for all
devices that use radar frequencies. If your client devices use a scan list with a few
specific frequencies that could conflict with radar frequencies, you could lose the
connection. It is recommended to widen the scan list range, use default scan list, or
change the AP frequency

Changes since 6.37rc10:

*) dude - (changes discussed here: http://forum.mikrotik.com/viewtopic.php?f=8&t=110424);
*) log - logs loaded from disk after reboot didn't have correct topics;
*) lte - fixed band setting for sxt lte;
*) lte - process initial state change to deregistred, when lockup occurs;
*) lte - reset if sms storage set fails;
*) modem - added d-link dwm-222 support;
*) modem - added logging for usb config switching;
*) ntp - fixed ntp server when local-clock used (like usb gps module);
 
pe1chl
Forum Guru
Forum Guru
Posts: 5722
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Aug 03, 2016 4:41 pm

To everyone talking about DFS. 

If your country has no DFS rules, RouterOS will not do anything. Each country has separate DFS config defined. 
If you have some special permission to use the radar frequencies, or there is some other reason you need to turn off DFS and not follow the rules, upon your own risk - don't set a country, or use wireless mode "superchannel". 
Ok but the problem is not that we would not want to use DFS, the problem is that DFS is so unpredictable and/or can be unstable.
This is not a MikroTik-specific thing, we have also observed this on Ubiquiti and TranZeo equipment.
Apparently the detection is misled, or the receiver is overdriven by a Radar on one channel even when it is receiving on another.
Maybe the DFS code could have more debugging info. E.g. in TranZeo it is possible to see on what channels radar was detected,
how many times on each channel, and when last. (this table is only kept between reboots)
This way it is possible to investigate problems and maybe send them to MikroTik, to see what can be done to overcome the problem.
 
korniza
newbie
Posts: 26
Joined: Fri Jan 06, 2012 4:05 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 04, 2016 11:41 am

I face the following problem on RB2011UiAS running v6.37rc10: ping tool using gui did not run and there is an error "Error: No Address".
I use winbox 3.4. Does anyone face the same issue?
 
ste
Forum Guru
Forum Guru
Posts: 1797
Joined: Sun Feb 13, 2005 11:21 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 04, 2016 3:32 pm

As MT now apperently try to be more compliant ... where is ATPC? The main competition does it now. It is a valuable feature with micro cells as it is a very good idea to turn down TX-Power on CPEs which are very close to the AP. Not doing ATPC we have to turn down power to 27db EIRP in 5.5 and 24 in 5.8.
 
slav0nic
just joined
Posts: 7
Joined: Sun Oct 26, 2014 10:14 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Aug 05, 2016 12:43 pm

rc11, hap ac, in Webfig - Quicksetup 2Ghz wifi setting Frequency list have only 5180-5765 values
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Aug 05, 2016 12:46 pm

What's new in 6.37rc12 (2016-Aug-05 05:31):

>>> IMPORTANT! WIRELESS PACKAGE CHANGES:

If you are not using "routeros" bundle package and have two wireless packages installed,
uninstall one wireless package before upgrade to 6.37. For other cases simply upgrade to
6.37 version.

There will be only one "wireless" package in RouterOS v6.37. If using bundle package to
upgrade, click "Check for updates" in your RouterOS configuration interface, or head to
our download page: http://www.mikrotik.com/download.

>>> IMPORTANT! DFS MODE CHANGES:

DFS mode setting is removed, and by default becomes forced to "dfs=radar-detect" for all
devices that use radar frequencies. If your client devices use a scan list with a few
specific frequencies that could conflict with radar frequencies, you could lose the
connection. It is recommended to widen the scan list range, use default scan list, or
change the AP frequency

Changes since 6.37rc11:

*) defconf - fixed default configuration when wireless package is used;
*) package - fixed upgrade to 6.37 from older RouterOS versions where multiple wireless packages were included in bundle "routeros" package;
*) ping - fixed freezing on "not running" interfaces;
*) winbox - fixed ping tool (introduced in 6.37rc1);
*) wireless - improved driver support for RB953, hAP ac, wAP ac;
*) wireless - send deauth to data frames in scan mode;
 
lekozs
newbie
Posts: 46
Joined: Wed Aug 30, 2006 12:49 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Aug 05, 2016 1:24 pm

To everyone talking about DFS. 

If your country has no DFS rules, RouterOS will not do anything. Each country has separate DFS config defined. 
If you have some special permission to use the radar frequencies, or there is some other reason you need to turn off DFS and not follow the rules, upon your own risk - don't set a country, or use wireless mode "superchannel". 
Ok but the problem is not that we would not want to use DFS, the problem is that DFS is so unpredictable and/or can be unstable.
This is not a MikroTik-specific thing, we have also observed this on Ubiquiti and TranZeo equipment.
Apparently the detection is misled, or the receiver is overdriven by a Radar on one channel even when it is receiving on another.
Maybe the DFS code could have more debugging info. E.g. in TranZeo it is possible to see on what channels radar was detected,
how many times on each channel, and when last. (this table is only kept between reboots)
This way it is possible to investigate problems and maybe send them to MikroTik, to see what can be done to overcome the problem.
I agree with @pe1chl !

Here are my findings...
I put a BaseBox 5 with a 16dBi dual pol sector antenna on a 12 story building just to play with this DFS thing...
Updated the device to v6.36 together with the wireless-rep package, and opened up the scan-list to the _complete_ 5GHz range EXCEPT the known radar frequencies (5600-5660MHz)
I turned on the DFS with radar-detect... and... this is what I got:

Image

Note: there are NO active users on this AP!
I am sure this area is NOT radar-infested, (I'm from a poor country... the government can't afford radars here... :wink: :wink: )
...however, as you can see, the RB is practically unusable. It always sees some phantom radar, and searches for another "clean" frequency...
I am standing by those people who are asking NOT to force the DFS with radar-detect on...
 
pe1chl
Forum Guru
Forum Guru
Posts: 5722
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Aug 05, 2016 2:26 pm

Ok in the above I see the DFS actions apparently are logged, I did not remember that from our DFS
experiments (where the only thing I was chasing was that I lost the connection every couple of minutes
and when it came back we were on a different frequency all the time).
So that part of my request can be disregarded, although maybe some debug values could be added when
available from the hardware (like the strength of the detected radar, and/or the impulse length?).
 
Zorro
Long time Member
Long time Member
Posts: 676
Joined: Wed Apr 16, 2014 2:43 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Aug 06, 2016 9:40 pm

generally i noticed that in last versions(last ~5 major versions or so)of ROS6 port-scan detection stopped working :/ thats not good, IMO.
also it think both DFS and especially radar-detection - should be bit more careful and slower(extra-math behind decision-making would make sense).
 
diablothebest
newbie
Posts: 27
Joined: Fri May 20, 2016 11:07 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Aug 08, 2016 8:32 am

We have strange problem with NAT.
We have big PS4 net behind nat, and peoples plays togather in Destiny!
But after 6.36 and 6.37 they cant connect to another players. Port used by this game is UDP 3074. Im create filter rule to forward this port and looks fine now. We dont have any block rule for udp.
Last edited by diablothebest on Mon Aug 08, 2016 11:12 am, edited 1 time in total.
 
UsernameMT
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Mon Nov 02, 2015 1:42 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Aug 08, 2016 10:13 am

http://forum.mikrotik.com/viewtopic.php ... 50#p550398
I can not use the 10 devices, because waiting the working firmware. WHEN?
sorry for my English
 
andriys
Forum Guru
Forum Guru
Posts: 1143
Joined: Thu Nov 24, 2011 1:59 pm
Location: Kharkiv, Ukraine

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Aug 08, 2016 1:34 pm

http://forum.mikrotik.com/viewtopic.php ... 50#p550398
I can not use the 10 devices, because waiting the working firmware. WHEN?
It's a bit weird to see complains like this in a topic dedicated to a test version of software. And yes, I followed your other links, and all of them appear to be talking about 6.37rc. The RC versions are only made available for testing purposes, you are NOT supposed to be using these in production, so what 10 devices that you cannot use you are talking about?
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Aug 08, 2016 2:19 pm

What's new in 6.37rc13 (2016-Aug-08 07:39):

>>> IMPORTANT! WIRELESS PACKAGE CHANGES:

If you are not using "routeros" bundle package and have two wireless packages installed,
uninstall one wireless package before upgrade to 6.37. For other cases simply upgrade to
6.37 version.

There will be only one "wireless" package in RouterOS v6.37. If using bundle package to
upgrade, click "Check for updates" in your RouterOS configuration interface, or head to
our download page: http://www.mikrotik.com/download.

>>> IMPORTANT! DFS MODE CHANGES:

DFS mode setting is removed, and by default becomes forced to "dfs=radar-detect" for all
devices that use radar frequencies. If your client devices use a scan list with a few
specific frequencies that could conflict with radar frequencies, you could lose the
connection. It is recommended to widen the scan list range, use default scan list, or
change the AP frequency

Changes since 6.37rc12:

*) disk - do not do unnecessary sector writes;
*) lte - added initial deregistration only for bandrich modems;
*) partitions - added ability to add comments;
*) partitions - fixed crash on repartition when there is not enough free space;
*) usb - added support for SMSC95XX USB Ethernet dongle on mipsbe;
*) webfig - allowed user password changing (broken in v6.36);
 
UsernameMT
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Mon Nov 02, 2015 1:42 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Aug 08, 2016 4:16 pm

It's a bit weird to see complains like this in a topic dedicated to a test version of software. And yes, I followed your other links, and all of them appear to be talking about 6.37rc. The RC versions are only made available for testing purposes, you are NOT supposed to be using these in production, so what 10 devices that you cannot use you are talking about?
in my post:
http://forum.mikrotik.com/viewtopic.php ... 57#p549357
i write - "in version 6.36"
version 6.36 - "6.36 (Current)"
please tell me, what topic to write bugs version 6.36 Current, I duplicates my posts in this topic. :evil:


PS: for MTteam: if I did write in the wrong topic, you just ignored me, could not say where i need write about the problem?!!
PPS: I had never imagined that the topic "[current] is released" can continue the discussion of bugs! :shock:
sorry for my English
 
notToNew
Member Candidate
Member Candidate
Posts: 147
Joined: Fri Feb 19, 2016 3:15 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Aug 08, 2016 4:55 pm

And just because of this you think you can not run your devices?
You can check in the script itself to see it the domain is already in the list....
--------------------------------------------------------------------------------------------
CCR1036-12G-4S, several 952Ui-5ac2nD, ...
 
User avatar
BartoszP
Forum Guru
Forum Guru
Posts: 1707
Joined: Mon Jun 16, 2014 1:13 pm
Location: Poland

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Aug 08, 2016 5:27 pm

please tell me, what topic to write bugs version 6.36 Current, I duplicates my posts in this topic. :evil:
PS: for MTteam: if I did write in the wrong topic, you just ignored me, could not say where i need write about the problem?!!
PPS: I had never imagined that the topic "[current] is released" can continue the discussion of bugs! :shock:
Is your router unusable with working old configuration applied when it uses IP not domain names ?

If yes then you have 10 unusable devices.

You have switched to new funcionalities and you are complaining about it.
Yes, it could be irritating that configuration with DNSes does not work same way as with IP but it does not make your router unusable despite fact that DNS names lists seem to work different that IP ones.
Real admins use real keyboards.
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8305
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Aug 08, 2016 5:40 pm

by the way, in current RC you cannot add duplicate domain names too :)
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
EDinATL
just joined
Posts: 10
Joined: Tue Jun 02, 2015 7:40 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Aug 08, 2016 7:26 pm

I had some trouble accessing the rc13 just now via the winbox system packages, so I just downloaded it from the site and all is fine so far. Other than that, I just wanted to say thanks for all the work and time you guys are putting in! Much love from Atlanta, GA, USA!
 
John39
just joined
Posts: 21
Joined: Mon Aug 08, 2016 11:17 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Aug 08, 2016 11:24 pm

I have a few in stock mikrotik rb 2011, only one of them when you install any version 6,37 rc wireless interface disappear, what would that do to avoid it. Removing packages, endless flashing does not help, at 6.36 on the site interface.
 
IntrusDave
Forum Guru
Forum Guru
Posts: 1284
Joined: Fri May 09, 2014 4:36 am
Location: Rancho Cucamonga, CA

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Aug 09, 2016 7:07 am

Bug: MIKROTIK-MIB-mtxrHlProcessorFrequency (SNMP Processor Frequency) reads 0 on the RB3011
David Joyce
Network & Security Engineer
Intrus Technologies, LLC.
Rancho Cucamonga, CA, USA
 
andriys
Forum Guru
Forum Guru
Posts: 1143
Joined: Thu Nov 24, 2011 1:59 pm
Location: Kharkiv, Ukraine

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Aug 09, 2016 9:26 am

where i need write about the problem?!!
support@mikrotik.com
 
UsernameMT
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Mon Nov 02, 2015 1:42 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Aug 09, 2016 11:36 am

where i need write about the problem?!!
support@mikrotik.com
Thank you so much!

Why then created it ?:
http://forum.mikrotik.com/viewtopic.php?f=21&t=110425
http://forum.mikrotik.com/viewtopic.php?f=21&t=110419

PS: замечательно, начерта темы форума созданы тогда? я описал явный БАГ прошивки, который стыдно допускать даже (просто по невнимательности его сделали). И ппц исправлять его еще месяц мля (сначала ждал пока релизнеться сама прошивка, теперь жди пока они исправят элементарнейший баг в ней). Попробуй создай дублированных сотню тысяч записей, а потом ручками и глазками выбирай их и удаляй. Вообще до сего момента, не понимал почему ВЕЗДЕ (от слова ВООБЩЕ ВЕЗДЕ) хаят техподдержку микротика, ... теперь понял...
Last edited by UsernameMT on Tue Aug 09, 2016 11:40 am, edited 1 time in total.
sorry for my English
 
User avatar
dash
newbie
Posts: 37
Joined: Tue Apr 28, 2015 12:05 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Aug 09, 2016 11:36 am

Hi guys, I want to report an issue with the capsman upgrade policy. I am currently running a ROS 6.37rc12 but this bug exists since the cap upgrade setting was introduced.

Bug description: When using 'require same version ' then caps act like having the 'suggest same version ' setting set,- and vice versa...
Example: With require same version i get a log entry: "upgrade failed, Provision as same version only suggested."

But It should be the other way around. Thanks for your great work. Keep it going...
 
John39
just joined
Posts: 21
Joined: Mon Aug 08, 2016 11:17 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Aug 09, 2016 12:27 pm

Смотрю тут пишут по русски, поэтому рискну и я.
Есть у меня несколько микротиков rb2011, с прошивкой 6.36 проблем нет, однако при прошивке его прошивкой 6.37 пропадает беспроводной интерфейс, пакет установлен, интерфейса нет. Проблема только на одном, с остальными проблем нет.
Откатываешь на 6.36, все в порядке. Как побороть?
 
UsernameMT
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Mon Nov 02, 2015 1:42 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Aug 09, 2016 12:34 pm

Смотрю тут пишут по русски, поэтому рискну и я.
Есть у меня несколько микротиков rb2011, с прошивкой 6.36 проблем нет, однако при прошивке его прошивкой 6.37 пропадает беспроводной интерфейс, пакет установлен, интерфейса нет.
Откатываешь на 6.36, все в порядке. Как побороть?
по русски тут пишут, когда в гневе, :D и не хватает английских слов, чтобы культурно изложить свои мысли, вопросу на русском навряд ли тут помогут, только англоязычное написание применяй. по поводу беспроводки, смотри выше, тут вроде в этой теме с первой страницы, озвучивают проблему и её решение
http://forum.mikrotik.com/viewtopic.php ... 99#p551539
сам не вникал, у меня Девайс3011, по этому не сталкивался, да и вообще тут один совет, не юзай RC используй только стабильные выпуски. Попробуй пользоваться форумом "форум наг ру", если решение существует, то там помогут.
sorry for my English
 
User avatar
BartoszP
Forum Guru
Forum Guru
Posts: 1707
Joined: Mon Jun 16, 2014 1:13 pm
Location: Poland

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Aug 09, 2016 1:17 pm

Please DO use English ... not all understand what you are writing. Both of you.
If you do not know enough words in English to curse as you write then ... "speech is silver and silence is golden"
Real admins use real keyboards.
 
andriys
Forum Guru
Forum Guru
Posts: 1143
Joined: Thu Nov 24, 2011 1:59 pm
Location: Kharkiv, Ukraine

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Aug 09, 2016 1:32 pm

Проблема только на одном, с остальными проблем нет.
Check you firmware (bootloader) version. Try upgrading in case current-firmware and upgrade-firmware versions differ.
/system routerboard print
/system routerboard upgrade
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8305
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Aug 09, 2016 2:24 pm

because it's just an announcements and there's a note on the bottom? "If you experience version related issues, then please send supout file from your router to support@mikrotik.com"
я описал явный БАГ прошивки, который стыдно допускать даже (просто по невнимательности его сделали)
я уже не говорю, что с таким "багом" address-lists существовали далеко не одну мажорную версию (с 2.9 по 6.??) - и всё было хорошо ;)
И ппц исправлять его еще месяц
не исправлять, а дорабатывать новую функциональность, разве нет? ;) а то, что кто-то её начал использовать, самостоятельно допридумывав желаемое поведение и не проверив его на практике - ну так это у этого человека проблема с программированием, не надо его допускать к написанию скриптов, если его никто не контролирует

вот вы месяц ждёте доработки - вы ведь правда уже давно подправили свой скрипт, чтобы он корректно работал в текущих условиях?
Попробуй создай дублированных сотню тысяч записей, а потом ручками и глазками выбирай их и удаляй.
вы такой смешной. почему создавали записи скриптом, а удаляли вручную? клин клином вышибать надо. т.е. скриптом :)
Вообще до сего момента, не понимал почему ВЕЗДЕ (от слова ВООБЩЕ ВЕЗДЕ) хаят техподдержку микротика, ... теперь понял...
потому что люди не умеют читать, но имеют богатую фантазию и преувеличенные надежды на форум сообщества пользователей? хотя вопросительный знак, пожалуй, лишний
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
User avatar
BartoszP
Forum Guru
Forum Guru
Posts: 1707
Joined: Mon Jun 16, 2014 1:13 pm
Location: Poland

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Aug 09, 2016 2:33 pm

Chupaka's post at a glance .... "do not complain, do your work" :-)

Chupaka .... молодец !!! :)
Real admins use real keyboards.
 
John39
just joined
Posts: 21
Joined: Mon Aug 08, 2016 11:17 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Aug 09, 2016 3:04 pm

Check you firmware (bootloader) version. Try upgrading in case current-firmware and upgrade-firmware versions differ.
Version 3.33
 
diablothebest
newbie
Posts: 27
Joined: Fri May 20, 2016 11:07 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Aug 09, 2016 3:12 pm

Нифга тут коры начались!

Use script to remove all old entries!
 
UsernameMT
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Mon Nov 02, 2015 1:42 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Aug 09, 2016 4:51 pm

...
не с одним предложением твоим не поспорю :) всё верно пишешь... но блин я могу переписать свои скрипты, добавив предварительную проверку уже имеющейся записи, но сотня тысяч таких записей будет идти ещё дольше, а она и так долго происходит и без этого :)
Кстати, использование возврата ошибки, это нормальная функциональность, которая и присутствует во всем остальном в том же микротике...
ну и опять мы приходим всё к тому же :lol: , приделай костыли, так как это микротик....
по поводу удалять скриптом, я всё ещё придерживаюсь, что "производителю" проще/правильнее исправить свой косяк, чем мне костЫлить стандартный скрипт - к сожалению тут меня не переубедить.
Опять же, сейчас настроишь приспособившись к этой проблеме, а потом исправят, надумаешь перепрошить, и ппц, всё слетит и начнешь заного... нет уж ....
...писал конечно же, потому что, как обычно - наболело...

Мужик, с уважением к тебе.

PS: i stop talking. :)
sorry for my English
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 5921
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Aug 09, 2016 5:10 pm

@UsernameMT: Problem is already fixed in v6.37rc
 
nescafe2002
Long time Member
Long time Member
Posts: 618
Joined: Tue Aug 11, 2015 12:46 pm
Location: Netherlands

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Aug 09, 2016 5:31 pm

Issue in auto update.. affected versions are 6.37rc12 and 6.37rc13.
[admin@MikroTik] /system package update> set channel=release-candidate 
[admin@MikroTik] /system package update> print 

error - contact MikroTik support and send a supout file (10)
[admin@MikroTik] /system package update> export 
# aug/09/2016 16:30:15 by RouterOS 6.37rc13
#
#error exporting /system package update

Edit:

Issue gone after reboot.. thanks raffav

Edit 2:

However, after opening 'System', 'Packages', 'Check For Updates' the issue is reintroduced:

Image

Edit 3:

Without Winbox, the issue occurs after setting (and changing) channel:
[admin@MikroTik] > /system package update
[admin@MikroTik] /system package update> print
            channel: release-candidate
  installed-version: 6.37rc13
[admin@MikroTik] /system package update> set channel=release-candidate
[admin@MikroTik] /system package update> print
            channel: release-candidate
  installed-version: 6.37rc13
[admin@MikroTik] /system package update> set channel=current
[admin@MikroTik] /system package update> print
            channel: current
  installed-version: 6.37rc13
     latest-version: 6.36
             status: New version is available
[admin@MikroTik] /system package update> set channel=release-candidate
[admin@MikroTik] /system package update> print

error - contact MikroTik support and send a supout file (10)
[admin@MikroTik] /system package update>
Edit 4:

Issue is fixed within rc13 (external cause?)
Last edited by nescafe2002 on Wed Aug 10, 2016 2:35 pm, edited 4 times in total.
 
raffav
Member Candidate
Member Candidate
Posts: 288
Joined: Wed Oct 24, 2012 4:40 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Aug 09, 2016 6:00 pm

Issue in auto update.. affected versions are 6.37rc12 and 6.37rc13.
[admin@MikroTik] /system package update> set channel=release-candidate 
[admin@MikroTik] /system package update> print 

error - contact MikroTik support and send a supout file (10)
[admin@MikroTik] /system package update> export 
# aug/09/2016 16:30:15 by RouterOS 6.37rc13
#
#error exporting /system package update

i get the same error but, after a while the system reboot and the new version show up


tested on on RB433, BASEBOX2 and CRS125
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 11, 2016 2:14 pm

--- IMPORTANT! WIRELESS PACKAGE CHANGES:

If you are not using "routeros" bundle package and have two wireless packages installed,
uninstall one wireless package before upgrade to 6.37. For other cases simply upgrade to
6.37 version.

There will be only one "wireless" package in RouterOS v6.37. If using bundle package to
upgrade, click "Check for updates" in your RouterOS configuration interface, or head to
our download page: http://www.mikrotik.com/download.

--- IMPORTANT! DFS MODE CHANGES:

DFS mode setting is removed, and by default becomes forced to "dfs=radar-detect" for all
devices that use radar frequencies. If your client devices use a scan list with a few
specific frequencies that could conflict with radar frequencies, you could lose the
connection. It is recommended to widen the scan list range, use default scan list, or
change the AP frequency

Changes since 6.37rc13:

*) capsman - fixed upgrade policy;
*) capsman - report radio-name in registration table;
*) dns - allow to set query-server-timeout and query-total-timeout only greater than 0s;
*) dns - fixed lockup when dynamic dns server address 0.0.0.0 was received;
*) dude - (changes discussed here: http://forum.mikrotik.com/viewtopic.php?f=8&t=110424);
*) firewall - added additional matchers for firewall raw rules;
*) health - do not show psu and fan information for passive cooling devices;
*) sstp - allow to specify proxy by dns name;
*) sstp - fixed disconnects on transmit for multicore systems;
*) traffic-flow - allow ipv6 src address to be optional;
*) webfig - do not crash if radius server does not give out encryption keys;
*) winbox - added src-address field for traffic-flow target;
*) winbox - fixed disconnect when no windows were opened for a while in unsecure mode;
*) winbox - hide ethernet flow control settings for interfaces which does not support them;
*) winbox - make queue tree default queue type default-small;
 
John39
just joined
Posts: 21
Joined: Mon Aug 08, 2016 11:17 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 11, 2016 5:08 pm

Today, I installed a new version of the firmware , but my problem with the wireless interface is lost it does not solve .
Сегодня установил новую версию прошивки, однако моей проблемы с пропадающим беспроводным интерфейсом это не решает.
 
diablothebest
newbie
Posts: 27
Joined: Fri May 20, 2016 11:07 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 11, 2016 5:47 pm

Так он у тебя вообще исчез?
Пробовал делать полный сброс без конфы?
 
John39
just joined
Posts: 21
Joined: Mon Aug 08, 2016 11:17 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 11, 2016 5:56 pm

Так он у тебя вообще исчез?
Пробовал делать полный сброс без конфы?
Да, совсем исчез, сброс делал без конфы, шил голый, все равно интерфейса нет.
Yes, absolutely disappeared , dumping did not confit, sewed naked, still no interface .
 
raffav
Member Candidate
Member Candidate
Posts: 288
Joined: Wed Oct 24, 2012 4:40 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 11, 2016 5:58 pm

Hi,

i think is not fair to post using a non english language :idea:
 
Zorro
Long time Member
Long time Member
Posts: 676
Joined: Wed Apr 16, 2014 2:43 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 11, 2016 6:13 pm

Hi,

i think is not fair to post using a non english language :idea:
"not make easier to communicate" maybe, "not fair" - definitely no.
having thousands of languages on Earth have nothing with "fairness". and "fairness" have nothing with "making sense".
its not sport or trade to care much about "fairness".
and if he/person was not fluent in English - its somewhat simpler to let them native language, than trying to understand them thru prism of google translate or whatever they tend to use.
after all - there was several ppl who still remember Russian language over there, even in Latvia.
 
patrick7
Member Candidate
Member Candidate
Posts: 298
Joined: Sat Jul 20, 2013 2:40 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 11, 2016 6:32 pm

Just ignore them, or they will continue posting in russian.
 
diablothebest
newbie
Posts: 27
Joined: Fri May 20, 2016 11:07 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 11, 2016 8:56 pm

Can you try reflash your device with NetInstall tool?
Прошивал через НетИнсталл роутер?
 
John39
just joined
Posts: 21
Joined: Mon Aug 08, 2016 11:17 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 11, 2016 10:44 pm

Can you try reflash your device with NetInstall tool?
Прошивал через НетИнсталл роутер?
No.
 
John39
just joined
Posts: 21
Joined: Mon Aug 08, 2016 11:17 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 11, 2016 11:23 pm

Попробовал netinstall, интерфейса нет.
Tried netinstall, interface no.
Image
Image
 
Zorro
Long time Member
Long time Member
Posts: 676
Joined: Wed Apr 16, 2014 2:43 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Aug 12, 2016 1:12 am

Попробовал netinstall, интерфейса нет.
Tried netinstall, interface no.
Image
Image
try to downgrade ROS to say ROS 6.35, restart, install all "wireless, disable, all but "wireless-cm2", restart router, remove all but wireless-cm2 package. install ROS 6.36, install ensure that "wireless-rep was operational and enabled. if so - remove other packages, restart.
and now - try to upgrade to 637rc15, perhaps.
 
jondavy
Member Candidate
Member Candidate
Posts: 125
Joined: Tue May 12, 2009 11:14 pm
Location: Brasil

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Aug 12, 2016 1:20 am

please add CCQ to CapsMan registration-table
 
John39
just joined
Posts: 21
Joined: Mon Aug 08, 2016 11:17 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Aug 12, 2016 7:54 am

try to downgrade ROS to say ROS 6.35, restart, install all "wireless, disable, all but "wireless-cm2", restart router, remove all but wireless-cm2 package. install ROS 6.36, install ensure that "wireless-rep was operational and enabled. if so - remove other packages, restart.
and now - try to upgrade to 637rc15, perhaps.
Спасибо, но где я могу скачать ROS 6.35?
Thank you, but where I can download the ROS 6.35?
 
UsernameMT
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Mon Nov 02, 2015 1:42 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Aug 12, 2016 9:14 am

но где я могу скачать ROS 6.35?
Thank you, but where I can download the ROS 6.35?
http://www.mikrotik.com/download/archive

If reflash on older version will not help, write to technical support.
And write in "english language" only, otherwise all offended (ignore) if you do not use international "english language". :wink:
sorry for my English
 
John39
just joined
Posts: 21
Joined: Mon Aug 08, 2016 11:17 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Aug 12, 2016 10:08 am

try to downgrade ROS to say ROS 6.35, restart, install all "wireless, disable, all but "wireless-cm2", restart router, remove all but wireless-cm2 package. install ROS 6.36, install ensure that "wireless-rep was operational and enabled. if so - remove other packages, restart.
and now - try to upgrade to 637rc15, perhaps.
Попробовал сделать как вы сказали. Установил 6.35.4, беспроводных пакетов стало 2, один отключил, cm оставил, второй пакет не удаляется. Установил 6.36, все работает, установил 6.37.15, беспроводной интерфейс пропал.
I tried to do as you say. Installed 6.35.4, wireless packet was 2, one disabled, cm left, the second package is not removed. Installed 6.36 , it works , installed 6.37.15 , the wireless interface is missing.
 
User avatar
BartoszP
Forum Guru
Forum Guru
Posts: 1707
Joined: Mon Jun 16, 2014 1:13 pm
Location: Poland

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Aug 12, 2016 10:52 am

John39

I have already asked you to not use Russian. Please consider your behavior.
Real admins use real keyboards.
 
John39
just joined
Posts: 21
Joined: Mon Aug 08, 2016 11:17 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Aug 12, 2016 12:47 pm

John39
I have already asked you to not use Russian. Please consider your behavior.
Я уверен что форум создан для помощи, о которой я и прошу и язык не должен являться препятствием для этого. Я вижу здесь много русскоязычных пользователей, более того, если вы не в курсе, то в Латвии большинство жителей разговаривает на русском языке, уверен, что русскоговорящим удобнее читать на русском языке, нежели читать кривой гугл перевод. Именно по этой причине я пишу по русски, но учитывая ваши требования я дублирую на английском языке, который в отличии от русского вы должны понимать. И еще, что б делать замечания другим, нужно быть идеальным самому, но как я вижу и вы тоже пишите на польском http://forum.mikrotik.com/viewtopic.php ... 85#p544985 .

I am sure that the forum is designed to help, which I ask, and the language should not be an obstacle to this. I see there are a lot of Russian-speaking users, moreover, if you do not know, the majority of residents in Latvia speaks in Russian, I am sure that Russian-speaking easier to read in Russian, rather than read the Google translation of the curve. It is for this reason that I am writing in Russian, but considering your demands I duplicate in the English language, which is in contrast to Russian, you need to understand. And yet, what would make remarks to others, you need to be perfect, but as I see you, too, write in Polish http://forum.mikrotik.com/viewtopic.php ... 85#p544985 .
 
User avatar
BartoszP
Forum Guru
Forum Guru
Posts: 1707
Joined: Mon Jun 16, 2014 1:13 pm
Location: Poland

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Aug 12, 2016 1:09 pm

A. I do read and understand Russian and it is not a problem for me.
B. I am using English on this forum.
C. Nobody is perfect but please translate my Polish text and you will see that I have written in Polish: This forum is in English language so please use it.
D. We have most of users not from Eastern Europe so please do not dazzle them with cyrillic alphabet ... what if Chinese users choose to use they iconic language or Middle East choose to write Arabic right to left ?
E. Please follow rules.
Real admins use real keyboards.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24142
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Aug 12, 2016 1:14 pm

This is not a latvian forum. Only around 0,001% of the users here are from Latvia
No answer to your question? How to write posts
 
nescafe2002
Long time Member
Long time Member
Posts: 618
Joined: Tue Aug 11, 2015 12:46 pm
Location: Netherlands

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Aug 12, 2016 4:03 pm

@John39, could you try installing the wireless package from the "Extra packages" bundle manually?
 
John39
just joined
Posts: 21
Joined: Mon Aug 08, 2016 11:17 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Aug 12, 2016 8:50 pm

@John39, could you try installing the wireless package from the "Extra packages" bundle manually?
I've done it , it does not solve the problem .
 
IntrusDave
Forum Guru
Forum Guru
Posts: 1284
Joined: Fri May 09, 2014 4:36 am
Location: Rancho Cucamonga, CA

Re: v6.37rc [release candidate] is released, only one wireless package!

Sun Aug 14, 2016 12:31 pm

hAP AC (internation) goes into a reboot loop when 6.37rc15 is installed.
Net install with 6.37rc15 continues the loop.
Net install with 6.36 boots stable.
David Joyce
Network & Security Engineer
Intrus Technologies, LLC.
Rancho Cucamonga, CA, USA
 
Zorro
Long time Member
Long time Member
Posts: 676
Joined: Wed Apr 16, 2014 2:43 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Sun Aug 14, 2016 2:08 pm

weird. then its must be something in router config, relate to wi-fi interface, preventing from properly exporting/upgrading it and transitioning to newer version.
and thus i presume it may be very interesting to MT to take a look into, considering possible impact on other customers.
downgrading bootloader to actual 3.31(where hell he get 3.33 ?)make sense or even trying to 3.22/3.23(depend platform).
 
User avatar
nastitek
just joined
Posts: 7
Joined: Wed Jan 27, 2016 2:36 am
Location: PHILIPPINES

Re: The Dude, v6.37rc test builds.

Mon Aug 15, 2016 2:28 am

HAP AC LITE

CPU 100% constant utilization
Winbox 3.4 cannot connect after a few hours - this may be due to high utilization
HotSpot settings keeps breaking - disabling dhcp for this interface until allowing LAN dhcp as its dhcp source/pool
LAN IP changes (under quickset) using recently added dhcp pool.
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Aug 15, 2016 11:39 am

What's new in 6.37rc16 (2016-Aug-15 07:48):

--- IMPORTANT! WIRELESS PACKAGE CHANGES:

If you are not using "routeros" bundle package and have two wireless packages installed,
uninstall one wireless package before upgrade to 6.37. For other cases simply upgrade to
6.37 version.

There will be only one "wireless" package in RouterOS v6.37. If using bundle package to
upgrade, click "Check for updates" in your RouterOS configuration interface, or head to
our download page: http://www.mikrotik.com/download.

--- IMPORTANT! DFS MODE CHANGES:

DFS mode setting is removed, and by default becomes forced to "dfs=radar-detect" for all
devices that use radar frequencies. If your client devices use a scan list with a few
specific frequencies that could conflict with radar frequencies, you could lose the
connection. It is recommended to widen the scan list range, use default scan list, or
change the AP frequency

Changes since 6.37rc15:

*) dude - (changes discussed here: http://forum.mikrotik.com/viewtopic.php?f=8&t=110424);
*) l2tp - fixed kernel failure when fastpath handles l2tp packets;
*) switch - added comment field for CRS switch VLANs;
*) switch - fixed configuration reload on CRS switches;
 
palhaland
just joined
Posts: 10
Joined: Mon Aug 15, 2016 9:05 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Aug 16, 2016 8:41 am

issues found on v6.27rc16 (running on mAP lite)

Love the new version with only one wireless package!

However I found some issues :)
Wireless interface
/interface wireless connect-list does not work on virtual station. (on mAP2nd) When running with logging the network is listed (correct frequency), but the wireless interface claim that there is no network that satisfy the connect list.

Scripting
This code works in command line but not in script;
{
:local $scanList "scanList.csv"
:local wlanInterface "wlan1"
:local j [:execute {/interface wireless scan [find name=$wlanInterface] background=yes duration=5 rounds=1 save-file=$scanList;}]
}
Where as this code works in both command line and script:
{
:local $scanList "scanList.csv"
:local wlanInterface [/interface wireless find name="wlan1"]
:local j [:execute {/interface wireless scan $wlanInterface background=yes duration=5 rounds=1 save-file=$scanList;}]
}
update 17.08.2016: there are no issues with scripting, the reason why it did not work was because the variables used was only in the local scope, it has to be in the global scope
Last edited by palhaland on Wed Aug 17, 2016 11:47 am, edited 1 time in total.
 
TonyJr
Member Candidate
Member Candidate
Posts: 198
Joined: Sat Nov 12, 2011 1:30 am
Location: UK
Contact:

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Aug 16, 2016 6:20 pm

*) sstp - fixed disconnects on transmit for multicore systems;

Thank you for this fix - site-to-site VPN is now stable between a CCR1009-8G-1S-1S+-PC and a CRS109-8G-1S-2HnD with 6.37rc16. I had thought the problem was with my configuration, until I saw the changelog. The connection would previously disconnect every few minutes if under any load - Link Downs would often have numbers in the thousands, now it is 0.

TonyJr
 
Ulypka
Frequent Visitor
Frequent Visitor
Posts: 52
Joined: Wed Jan 09, 2013 8:26 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Aug 17, 2016 2:22 pm

After upgrade from v6.37rc10 to v6.37rc16 openvpn server dosn't work.
 
User avatar
emils
MikroTik Support
MikroTik Support
Posts: 481
Joined: Thu Dec 11, 2014 8:53 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Aug 17, 2016 2:38 pm

Ulypka, please send supout.rif file to support@mikrotik.com
 
Ulypka
Frequent Visitor
Frequent Visitor
Posts: 52
Joined: Wed Jan 09, 2013 8:26 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Aug 17, 2016 9:19 pm

emils, I'm so sorry it was my mistake unrelated to ovpn.
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 18, 2016 2:11 pm

What's new in 6.37rc19 (2016-Aug-18 06:46):

--- IMPORTANT! WIRELESS PACKAGE CHANGES:

If you are not using "routeros" bundle package and have two wireless packages installed,
uninstall one wireless package before upgrade to 6.37. For other cases simply upgrade to
6.37 version.

There will be only one "wireless" package in RouterOS v6.37. If using bundle package to
upgrade, click "Check for updates" in your RouterOS configuration interface, or head to
our download page: http://www.mikrotik.com/download.

--- IMPORTANT! DFS MODE CHANGES:

DFS mode setting is removed, and by default becomes forced to "dfs=radar-detect" for all
devices that use radar frequencies. If your client devices use a scan list with a few
specific frequencies that could conflict with radar frequencies, you could lose the
connection. It is recommended to widen the scan list range, use default scan list, or
change the AP frequency

Changes since 6.37rc16:

*) arm - show cpu frequency under resources menu;
*) arp - fixed crash that caused Ethernet frames to go out via wrong interface;
*) dude - (changes discussed here: http://forum.mikrotik.com/viewtopic.php?f=8&t=110424);
*) pppoe - fixed kernel crash caused by dial-on-demand when used with fastpath;
 
uldis
MikroTik Support
MikroTik Support
Posts: 3424
Joined: Mon May 31, 2004 2:55 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 18, 2016 3:41 pm

issues found on v6.27rc16 (running on mAP lite)

Love the new version with only one wireless package!

However I found some issues :)
Wireless interface
/interface wireless connect-list does not work on virtual station. (on mAP2nd) When running with logging the network is listed (correct frequency), but the wireless interface claim that there is no network that satisfy the connect list.
I was unable to reproduce this problem.
Please provide us more information on that and also the wireless debug logs. Also make sure you select the correct security-profile in the connect-list.
 
jarda
Forum Guru
Forum Guru
Posts: 7602
Joined: Mon Oct 22, 2012 4:46 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 18, 2016 3:46 pm

Is the [Ticket#2016081022001387] solved already in this rc?
 
Ciambot
Member Candidate
Member Candidate
Posts: 144
Joined: Thu Jan 22, 2009 5:22 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 18, 2016 3:50 pm

--- IMPORTANT! DFS MODE CHANGES:

DFS mode setting is removed, and by default becomes forced to "dfs=radar-detect" for all
devices that use radar frequencies. If your client devices use a scan list with a few
specific frequencies that could conflict with radar frequencies, you could lose the
connection. It is recommended to widen the scan list range, use default scan list, or
change the AP frequency

Oh my God!
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24142
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 18, 2016 3:52 pm

--- IMPORTANT! DFS MODE CHANGES:

DFS mode setting is removed, and by default becomes forced to "dfs=radar-detect" for all
devices that use radar frequencies. If your client devices use a scan list with a few
specific frequencies that could conflict with radar frequencies, you could lose the
connection. It is recommended to widen the scan list range, use default scan list, or
change the AP frequency

Oh my God!
If you are in some place where you can use the radar frequencies ... Use Superchannel mode and it won't matter
No answer to your question? How to write posts
 
pe1chl
Forum Guru
Forum Guru
Posts: 5722
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 18, 2016 3:59 pm

If you are in some place where you can use the radar frequencies ... Use Superchannel mode and it won't matter
The problem is not using the radar frequencies, the problem is the (mis?)detection of radar on other frequencies when
at a high site near to radar. Do you mean that when switching from "regulatory - domain" to "superchannel" you can
still turn off the DFS? And will this remain in place or will it be the next feature to go?

Fortunately we use separate routers and APs that are only bridge, so we can still update routers and keep APs on old firmware
until there is a good solution. As it is now, DFS does not work for us on SXT, Metal5 etc.
 
napismizpravu
Member Candidate
Member Candidate
Posts: 135
Joined: Sat Apr 09, 2011 1:27 pm
Location: czech

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 18, 2016 5:02 pm

6.37rc19 Do not use RB433UAH hide all interfaces wireless (winbox, web) ethernet random refresh, wireless no configuration (remembers previous settings, broadcasts), ....downgrade previous build 6.37rc15
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24142
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 18, 2016 5:04 pm

6.37rc19 Do not use RB433UAH hide all interfaces wireless (winbox, web) ethernet random refresh, wireless no configuration (remembers previous settings, broadcasts), ....downgrade previous build 6.37rc15
Most likely your wireless package got disabled, this can sometimes happen if you have installed multiple wireless packages. No need to downgrade, just need to re-enable correct wireless npk.
No answer to your question? How to write posts
 
napismizpravu
Member Candidate
Member Candidate
Posts: 135
Joined: Sat Apr 09, 2011 1:27 pm
Location: czech

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 18, 2016 5:21 pm

6.37rc19 Do not use RB433UAH hide all interfaces wireless (winbox, web) ethernet random refresh, wireless no configuration (remembers previous settings, broadcasts), ....downgrade previous build 6.37rc15
Most likely your wireless package got disabled, this can sometimes happen if you have installed multiple wireless packages. No need to downgrade, just need to re-enable correct wireless npk.

It's not this way
wireless packages activate build 6.37rc19 ( wireless AP view air)
build 6.37rc15 upgrade to 6.37rc19 > downgrade 6.37rc15 (works)
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1721
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 18, 2016 5:30 pm

It's not this way
wireless packages activate build 6.37rc19 ( wireless AP view air)
build 6.37rc15 upgrade to 6.37rc19 > downgrade 6.37rc15 (works)
You most definately need to send supout.rif file from rc19 to support@mikrotik.com
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.
 
napismizpravu
Member Candidate
Member Candidate
Posts: 135
Joined: Sat Apr 09, 2011 1:27 pm
Location: czech

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 18, 2016 5:55 pm


You most definately need to send supout.rif file from rc19 to support@mikrotik.com

macgaiver: why he wrote it? post+1? your is spamer
 
palhaland
just joined
Posts: 10
Joined: Mon Aug 15, 2016 9:05 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 18, 2016 6:03 pm

issues found on v6.27rc16 (running on mAP lite)

Love the new version with only one wireless package!

However I found some issues :)
Wireless interface
/interface wireless connect-list does not work on virtual station. (on mAP2nd) When running with logging the network is listed (correct frequency), but the wireless interface claim that there is no network that satisfy the connect list.
I was unable to reproduce this problem.
Please provide us more information on that and also the wireless debug logs. Also make sure you select the correct security-profile in the connect-list.
This is with frequency set to auto on the ap-bridge
831	Aug/18/2016 16:38:04	memory	wireless, debug	wlan2: no network that satisfies connect-list, by default choose with strongest signal	
832	Aug/18/2016 16:38:04	memory	wireless, debug	wlan2: failed to select network	
833	Aug/18/2016 16:38:04	memory	wireless, debug	wlan2: must select network	
834	Aug/18/2016 16:38:04	memory	wireless, debug	empty
This is with frequency set to the correct frequency:
985	Aug/18/2016 16:41:21	memory	wireless, debug	<mac address>: on 2462 AP: yes SSID <correct network name> caps 0x1431 rates 0xCCK:11 OFDM:12-54 BW:1x SGI:1x HT:0-23 basic 0xCCK:11 MT: no	
986	Aug/18/2016 16:41:21	memory	wireless, debug	<mac address>: on 2462 AP: yes SSID <correct network name> caps 0x1431 rates 0xCCK:11 OFDM:12-54 BW:1x SGI:1x HT:0-23 basic 0xCCK:11 MT: no	
987	Aug/18/2016 16:41:21	memory	wireless, debug	<mac address>: on 2462 AP: yes SSID <different network name> caps 0x1431 rates 0xCCK:11 OFDM:12-54 BW:1x SGI:1x HT:0-23 basic 0xCCK:11 MT: no	
988	Aug/18/2016 16:41:21	memory	wireless, debug	<mac address>: on 2462 AP: yes SSID caps 0x1431 rates 0xCCK:11 OFDM:12-54 BW:1x SGI:1x HT:0-23 basic 0xCCK:11 MT: no	
989	Aug/18/2016 16:41:21	memory	wireless, debug	<mac address>: on 2462 AP: yes SSID caps 0x1431 rates 0xCCK:11 OFDM:12-54 BW:1x SGI:1x HT:0-23 basic 0xCCK:11 MT: no	
990	Aug/18/2016 16:41:21	memory	wireless, debug	wlan2: no network that satisfies connect-list, by default choose with strongest signal	
991	Aug/18/2016 16:41:21	memory	wireless, debug	wlan2: failed to select network	
992	Aug/18/2016 16:41:22	memory	wireless, debug	wlan2: must select network	
# aug/18/2016 16:46:13 by RouterOS 6.37rc16
# software id = G2LP-VRHH
#
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-b/g/n channel-width=20/40mhz-eC \
    disabled=no distance=indoors frequency=2462 mode=ap-bridge ssid=\
    MikroTik-149006 wireless-protocol=802.11
add disabled=no mac-address=<mac-address> master-interface=wlan1 mode=\
    station-pseudobridge name=wlan2
/ip neighbor discovery
set ether1 discover=no
/interface wireless security-profiles
add authentication-types=wpa-psk,wpa2-psk management-protection=allowed mode=\
    dynamic-keys name=profile1 wpa-pre-shared-key=<password> \
    wpa2-pre-shared-key=<password>
/ip pool
add name=default-dhcp ranges=192.168.88.10-192.168.88.254
/ip dhcp-server
add address-pool=default-dhcp disabled=no interface=wlan1 name=defconf
/interface wireless connect-list
add interface=wlan2 security-profile=profile1 ssid=<network name>
/ip address
add address=192.168.88.1/24 comment=defconf interface=wlan1 network=\
    192.168.88.0
/ip dhcp-client
add comment=defconf dhcp-options=hostname,clientid disabled=no interface=ether1
add default-route-distance=0 dhcp-options=hostname,clientid disabled=no \
    interface=wlan2
/ip dhcp-server network
add address=192.168.88.0/24 comment=defconf gateway=192.168.88.1
/ip dns
set allow-remote-requests=yes
/ip dns static
add address=192.168.88.1 name=router
/ip firewall filter
add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
add action=accept chain=input comment="defconf: accept established,related" \
    connection-state=established,related
add action=drop chain=input comment="defconf: drop all from WAN" in-interface=\
    ether1
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \
    connection-state=established,related
add action=accept chain=forward comment="defconf: accept established,related" \
    connection-state=established,related
add action=drop chain=forward comment="defconf: drop invalid" connection-state=\
    invalid
add action=drop chain=forward comment=\
    "defconf:  drop all from WAN not DSTNATed" connection-nat-state=!dstnat \
    connection-state=new in-interface=ether1
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" out-interface=\
    ether1
/system clock
set time-zone-name=Europe/Oslo
/system logging
add topics=wireless,debug
/system routerboard settings
set cpu-frequency=650MHz protected-routerboot=disabled
/tool mac-server
set [ find default=yes ] disabled=yes
add interface=wlan1
/tool mac-server mac-winbox
set [ find default=yes ] disabled=yes
add interface=wlan1
By only adding the SSID to connect to and the security profile, it connects immediately
/interface wireless wlan2 set ssid=<wireless network> security-profile=profile1
 
voody77
just joined
Posts: 1
Joined: Thu Aug 18, 2016 6:18 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 18, 2016 6:23 pm

6.37rc19 Do not use RB433UAH hide all interfaces wireless (winbox, web) ethernet random refresh, wireless no configuration (remembers previous settings, broadcasts), ....downgrade previous build 6.37rc15
Most likely your wireless package got disabled, this can sometimes happen if you have installed multiple wireless packages. No need to downgrade, just need to re-enable correct wireless npk.
At start hap ac wireless interfaces is work. run 2-5 minuts - result: hide all wireless interfaces in inbox menu on 6.37rc19 and networks not working!
 
raffav
Member Candidate
Member Candidate
Posts: 288
Joined: Wed Oct 24, 2012 4:40 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 18, 2016 6:36 pm

6.37rc19 Do not use RB433UAH hide all interfaces wireless (winbox, web) ethernet random refresh, wireless no configuration (remembers previous settings, broadcasts), ....downgrade previous build 6.37rc15
for me is ok
[raffaello@RJ-AT-MK02 - CAP1] > interface wireless print without-paging 
Flags: X - disabled, R - running 
 0 X  ;;; COMERCIAL --- wireless
      name="Wap45_comercial" mtu=1500 l2mtu=1600 mac-address=02:15:6D:68:40:71 arp=enabled interface-type=virtual master-interface=wlan1 mode=ap-bridge ssid="comercial_answer" vlan-mode=no-tag vlan-id=1 
      wds-mode=disabled wds-default-bridge=none wds-ignore-ssid=no bridge-mode=enabled default-authentication=no default-forwarding=no default-ap-tx-limit=0 default-client-tx-limit=0 hide-ssid=no 
      security-profile=comercial_answer 

 1 X  ;;; DIRETORIA --- wireless
      name="Wap75_diretoria" mtu=1500 l2mtu=1600 mac-address=02:15:6D:68:40:74 arp=enabled interface-type=virtual master-interface=wlan1 mode=ap-bridge ssid="diretoria_answer" vlan-mode=no-tag vlan-id=1 
      wds-mode=disabled wds-default-bridge=none wds-ignore-ssid=no bridge-mode=enabled default-authentication=yes default-forwarding=yes default-ap-tx-limit=0 default-client-tx-limit=0 hide-ssid=no 
      security-profile=diretoria_answer 

 2 X  ;;; LOGISTICA --- wireless
      name="Wap85_logistica" mtu=1500 l2mtu=1600 mac-address=02:15:6D:68:40:70 arp=enabled interface-type=virtual master-interface=wlan1 mode=ap-bridge ssid="logistica_answer" vlan-mode=no-tag vlan-id=1 
      wds-mode=disabled wds-default-bridge=none wds-ignore-ssid=no bridge-mode=enabled default-authentication=yes default-forwarding=yes default-ap-tx-limit=0 default-client-tx-limit=0 hide-ssid=no 
      security-profile=logistica_answer 

 3 X  ;;; VISITANTE --- wireless
      name="Wap145_visitante" mtu=1500 l2mtu=1600 mac-address=02:15:6D:68:40:6F arp=enabled interface-type=virtual master-interface=wlan1 mode=ap-bridge ssid="visitante_answer" vlan-mode=no-tag vlan-id=1 
      wds-mode=disabled wds-default-bridge=none wds-ignore-ssid=no bridge-mode=enabled default-authentication=yes default-forwarding=yes default-ap-tx-limit=0 default-client-tx-limit=0 hide-ssid=no 
      security-profile=visitante_answer 

 4 X  ;;; MOBILE-RJ --- wireless
      name="Wap146_mobile-rj" mtu=1500 l2mtu=1600 mac-address=02:15:6D:69:38:B0 arp=enabled interface-type=virtual master-interface=wlan1 mode=ap-bridge ssid="answer_mobile" vlan-mode=no-tag vlan-id=146 
      wds-mode=disabled wds-default-bridge=none wds-ignore-ssid=no bridge-mode=enabled default-authentication=yes default-forwarding=yes default-ap-tx-limit=0 default-client-tx-limit=0 hide-ssid=no 
      security-profile=mobile_answer 

 5 X  ;;; TI --- Wireless
      name="Wap155_TI" mtu=1500 l2mtu=1600 mac-address=02:15:6D:68:40:75 arp=enabled interface-type=virtual master-interface=wlan1 mode=ap-bridge ssid="TI_answer" vlan-mode=no-tag vlan-id=155 wds-mode=disabled 
      wds-default-bridge=none wds-ignore-ssid=no bridge-mode=enabled default-authentication=yes default-forwarding=yes default-ap-tx-limit=0 default-client-tx-limit=0 hide-ssid=no security-profile=TI_answer 

 6 X  ;;; TI --- Wireless Mobile
      name="Wap156_MOBILE" mtu=1500 l2mtu=1600 mac-address=02:15:6D:69:38:AF arp=enabled interface-type=virtual master-interface=wlan1 mode=ap-bridge ssid="W_TI" vlan-mode=no-tag vlan-id=1 wds-mode=disabled 
      wds-default-bridge=none wds-ignore-ssid=no bridge-mode=enabled default-authentication=no default-forwarding=no default-ap-tx-limit=0 default-client-tx-limit=0 hide-ssid=yes security-profile=TI_Mobile 

 7 X  ;;; managed by CAPsMAN
      ;;; channel: 2412/20/g(21dBm), SSID: diretoria_answer, CAPsMAN forwarding
      name="wlan1" mtu=1500 l2mtu=1600 mac-address=D4:CA:6D:14:01:F3 arp=enabled interface-type=Atheros AR5413 mode=ap-bridge ssid="answer_wireless" frequency=auto band=2ghz-b/g channel-width=20mhz 
      scan-list=default wireless-protocol=802.11 antenna-mode=ant-a vlan-mode=no-tag vlan-id=97 wds-mode=disabled wds-default-bridge=none wds-ignore-ssid=no bridge-mode=disabled default-authentication=no 
      default-forwarding=no default-ap-tx-limit=0 default-client-tx-limit=0 hide-ssid=yes security-profile=TI_answer compression=no 
[raffaello@RJ-AT-MK02 - CAP1] > system package print 
Flags: X - disabled 
 #   NAME                                                                                         VERSION                                                                                        SCHEDULED              
 0   routeros-mipsbe                                                                              6.37rc19                                                                                                              
 1   system                                                                                       6.37rc19                                                                                                              
 2   ipv6                                                                                         6.37rc19                                                                                                              
 3   wireless                                                                                     6.37rc19                                                                                                              
 4   hotspot                                                                                      6.37rc19                                                                                                              
 5   dhcp                                                                                         6.37rc19                                                                                                              
 6   mpls                                                                                         6.37rc19                                                                                                              
 7   routing                                                                                      6.37rc19                                                                                                              
 8   ppp                                                                                          6.37rc19                                                                                                              
 9   security                                                                                     6.37rc19                                                                                                              
10   advanced-tools                                                                               6.37rc19  
raffaello@RJ-AT-MK02 - CAP1] > system resource print 
                   uptime: 6m35s
                  version: 6.37rc19 (testing)
               build-time: Aug/18/2016 06:45:52
              free-memory: 104.7MiB
             total-memory: 128.0MiB
                      cpu: MIPS 24Kc V7.4
                cpu-count: 1
            cpu-frequency: 680MHz
                 cpu-load: 4%
           free-hdd-space: 492.1MiB
          total-hdd-space: 512.0MiB
  write-sect-since-reboot: 237
         write-sect-total: 45367767
               bad-blocks: 0.2%
        architecture-name: mipsbe
               board-name: RB433UAH
                 platform: MikroTik
 
napismizpravu
Member Candidate
Member Candidate
Posts: 135
Joined: Sat Apr 09, 2011 1:27 pm
Location: czech

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 18, 2016 6:53 pm

raffav I use „Extra packages” (all_packages...) the terminal I was not looking, important WinBox
 
raffav
Member Candidate
Member Candidate
Posts: 288
Joined: Wed Oct 24, 2012 4:40 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 18, 2016 7:03 pm

raffav I use „Extra packages” (all_packages...) the terminal I was not looking, important WinBox
ok
so maybe the problem is on the extra packages, my winbox is ok too
I don't lost any wifi configuration or interfaces
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1721
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Aug 19, 2016 10:26 am


You most definately need to send supout.rif file from rc19 to support@mikrotik.com
macgaiver: why he wrote it? post+1? your is spamer
Cause only ones that can help you are reachable via that mail, to make sure that RC20 doesn't have this problem.
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Aug 19, 2016 11:18 am

What's new in 6.37rc20 (2016-Aug-19 06:35):

--- IMPORTANT! WIRELESS PACKAGE CHANGES:

If you are not using "routeros" bundle package and have two wireless packages installed,
uninstall one wireless package before upgrade to 6.37. For other cases simply upgrade to
6.37 version.

There will be only one "wireless" package in RouterOS v6.37. If using bundle package to
upgrade, click "Check for updates" in your RouterOS configuration interface, or head to
our download page: http://www.mikrotik.com/download.

--- IMPORTANT! DFS MODE CHANGES:

DFS mode setting is removed, and by default becomes forced to "dfs=radar-detect" for all
devices that use radar frequencies. If your client devices use a scan list with a few
specific frequencies that could conflict with radar frequencies, you could lose the
connection. It is recommended to widen the scan list range, use default scan list, or
change the AP frequency

Changes since 6.37rc19:

*) address-list - fixed crash (introduced in 6.37rc17);
*) dude - (changes discussed here: http://forum.mikrotik.com/viewtopic.php?f=8&t=110424);
*) export - updated default values in /system routerboard settings menu;
*) sfp - enabled eeprom printout in /interface ethernet monitor;
*) sfp - removed "sfp-rate-select" as command was not relevant to currently supported hardware;
*) trafficgen - fixed crash (introduced in 6.37rc17);
 
pe1chl
Forum Guru
Forum Guru
Posts: 5722
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Aug 19, 2016 10:22 pm

*) snmp - added script table which executes script and returns it's output on get request;

Please explain how to use this feature, because I cannot find it in the user interface...
 
raffav
Member Candidate
Member Candidate
Posts: 288
Joined: Wed Oct 24, 2012 4:40 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Aug 19, 2016 11:06 pm

Very strange thing on a RB450G when I do a port knock using tcp the RB reset all interface and lost connection
using rc19 version

port knock is 2 top sequencie 2468 and 55027

can any one using rc19 tray to se if the rb crash
 
Zorro
Long time Member
Long time Member
Posts: 676
Joined: Wed Apr 16, 2014 2:43 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Sun Aug 21, 2016 11:23 pm

there was presumed some changes in 3.34 bootloader ?
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 25, 2016 10:18 am

What's new in 6.37rc21 (2016-Aug-25 06:15):

--- IMPORTANT! WIRELESS PACKAGE CHANGES:

If you are not using "routeros" bundle package and have two wireless packages installed,
uninstall one wireless package before upgrade to 6.37. For other cases simply upgrade to
6.37 version.

There will be only one "wireless" package in RouterOS v6.37. If using bundle package to
upgrade, click "Check for updates" in your RouterOS configuration interface, or head to
our download page: http://www.mikrotik.com/download.

--- IMPORTANT! DFS CHANGES:

DFS configuration in RouterOS has been redesigned, now device looks at specified country
settings (/interface wireless info country-info <country> ), and apply corresponding
DFS mode for each frequency range automatically, making dfs-mode setting unnecessary.

Please, check that your frequencies work with correcponding DFS settings before upgrade.

Changes since 6.37rc20:

*) dude - (changes discussed here: http://forum.mikrotik.com/viewtopic.php?f=8&t=110424);
*) hotspot - show comments from user menu also in active menu;
*) tunnel - ipv6 link-local address is now generated from tunnel local-address;
*) vlan - do not allow to add new vlan interface with mtu higher than l2mtu;
*) wireless - updated brazil country settings;
 
heaven
just joined
Posts: 13
Joined: Mon Aug 15, 2016 12:14 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 25, 2016 12:17 pm

Hi Guys, I have 2 Mikrotik in my network (RB2011 & hAP AC Lite). All my routers have release candidate firmware. The RB2011 is a capsman controller and hap ac is a cap with 2 more virtual cap.
When RB2011 was restart after upgrade or another cause the cap in hap ac has registered new/dynamic wlan number in cap. It's very uncomfortably because I have some bridges and all each networks (wlans) uses different bridges.
For example.
on the hAP AC
Bridge -> Ports:
br1 - wlan0
br2 - wlan2
br3 - wlan3
Wireless by controller capsman:
wlan0 - general cap
wlan2 - 1st virtual cap
wlan3 - 2nd virtual cap

after restart of capsman controller (RB2011), cap (hAP AC) registered new wlans:
Wireless capsmann controlled:
wlan0 - general cap
wlan25 - 1st virtual cap
wlan26 - 2nd virtual cap.

in Bridge -> Ports
br1 - wlan0
br2 - unknown
br3 - unknown

how to solve this problem or maybe developer have a liitle time to do a static virtual caps wlans number?) Thanks.
 
raffav
Member Candidate
Member Candidate
Posts: 288
Joined: Wed Oct 24, 2012 4:40 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 25, 2016 12:52 pm

Don't use dynamic enable
Use enable only

Enviado de meu XT1580 usando Tapatalk
 
heaven
just joined
Posts: 13
Joined: Mon Aug 15, 2016 12:14 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 25, 2016 12:59 pm

Don't use dynamic enable
Use enable only

Enviado de meu XT1580 usando Tapatalk
wrong(. every time cap have a new number of virtual cap wlan on reconnect. if it's was be so easy i'm not write here. but thank you for your answer).
 
raffav
Member Candidate
Member Candidate
Posts: 288
Joined: Wed Oct 24, 2012 4:40 am

v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 25, 2016 1:22 pm

Don't use dynamic enable
Use enable only

Enviado de meu XT1580 usando Tapatalk
wrong(. every time cap have a new number of virtual cap wlan on reconnect. if it's was be so easy i'm not write here. but thank you for your answer).
Sorry, but sometimes is wrong there,
My cap number don't change when devices is rebooted

Edit:
Now I got it
I understand another Dynamic number Image

The caps number on the cap device it Is normal to increase ( Why need to be like that I don't know)

The trick is to use data path settings so the caps interface go to the correct bridge


Enviado de meu XT1580 usando Tapatalk
 
napismizpravu
Member Candidate
Member Candidate
Posts: 135
Joined: Sat Apr 09, 2011 1:27 pm
Location: czech

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 25, 2016 1:52 pm

info: RB433UAH this works build 6.37rc21 (all_packages...)
upgrade 6.37rc15 :>>> 6.37rc21

6.37rc19 no works
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 25, 2016 1:56 pm

What's new in 6.37rc22 (2016-Aug-25 09:01):

--- IMPORTANT! WIRELESS PACKAGE CHANGES:

If you are not using "routeros" bundle package and have two wireless packages installed,
uninstall one wireless package before upgrade to 6.37. For other cases simply upgrade to
6.37 version.

There will be only one "wireless" package in RouterOS v6.37. If using bundle package to
upgrade, click "Check for updates" in your RouterOS configuration interface, or head to
our download page: http://www.mikrotik.com/download.

--- IMPORTANT! DFS CHANGES:

DFS configuration in RouterOS has been redesigned, now device looks at specified country
settings (/interface wireless info country-info), and applies corresponding
DFS mode for each frequency range automatically, making dfs-mode setting unnecessary.

Please, check that your frequencies work with corresponding DFS settings before upgrade.

Changes since 6.37rc21:

*) ethernet - fixed rare kernel failure on non-switch ethernet reset;
*) simple queues - fixed issue which caused additional/unnecessary CPU load;
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1721
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 25, 2016 2:03 pm

*) simple queues - fixed issue which caused additional/unnecessary CPU load;
Can you be more specific? What simple queue configurations are affected? how much?
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.
 
heaven
just joined
Posts: 13
Joined: Mon Aug 15, 2016 12:14 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 25, 2016 2:06 pm

Don't use dynamic enable
Use enable only

Enviado de meu XT1580 usando Tapatalk
wrong(. every time cap have a new number of virtual cap wlan on reconnect. if it's was be so easy i'm not write here. but thank you for your answer).
Sorry, but sometimes is wrong there,
My cap number don't change when devices is rebooted

Edit:
Now I got it
I understand another Dynamic number Image

The caps number on the cap device it Is normal to increase ( Why need to be like that I don't know)

The trick is to use data path settings so the caps interface go to the correct bridge


Enviado de meu XT1580 usando Tapatalk
I try fistly write br number in datapath but nothing(.
 
patrick7
Member Candidate
Member Candidate
Posts: 298
Joined: Sat Jul 20, 2013 2:40 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 25, 2016 2:12 pm

Feature request:
Allow unset at every place where it's possible to set an empty value (example: bgp update source, unset update-source does not work, set update-source=none is needed. firewall log prefix, set log-prefix="" works, but unset log-prefix does not work.).
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 25, 2016 2:13 pm

macgaiver - Simple Queue hashing algorithm had an issue which caused hash rebuilds. This caused additional CPU load. This fix affects all Simple Queue configurations but improvement depends on queue count and complexity.

This issue was found on Intel based x86 installation with ~6500 Simple Queues. Load after upgrade went down from 70-80% to 20-30%.
 
pe1chl
Forum Guru
Forum Guru
Posts: 5722
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 25, 2016 2:36 pm

Feature request:
Allow unset at every place where it's possible to set an empty value (example: bgp update source, unset update-source does not work, set update-source=none is needed. firewall log prefix, set log-prefix="" works, but unset log-prefix does not work.).
unset something is not the same as setting an empty value for it. it may work out the same in some cases, but be different in others.
maybe you would want a "reset" function that sets it to its default value, which may be unset, empty or none.
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 5921
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 25, 2016 2:44 pm

unset is available only for parameters that can be unset, log-prefix is not one of them.

Type in the terminal "unset 0 <tab>" and see all acceptable parameters that can be unset.
 
patrick7
Member Candidate
Member Candidate
Posts: 298
Joined: Sat Jul 20, 2013 2:40 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 25, 2016 2:45 pm

Don't agree.
[admin@cr1.zrh1] /routing bgp peer> :put [get 6 update-source ] 
As you can see, update-source is nothing (=empty). In WebFig, it's possible to click an arrow to make this field disappearing (like unset).
[admin@cr1.zrh1] /routing bgp peer> set 6 update-source=1.2.3.4
[admin@cr1.zrh1] /routing bgp peer> :put [get 6 update-source ]
1.2.3.4
Now we have the update source "1.2.3.4". I want to do the same as in the GUI, unset this value:
[admin@cr1.zrh1] /routing bgp peer> unset 6 update-source
input does not match any value of value-name
So why should I use
[admin@cr1.zrh1] /routing bgp peer> set 6 update-source=none
[admin@cr1.zrh1] /routing bgp peer> :put [get 6 update-source ] 
? In my oppinion, "none" is not correct. Every BGP update message NEEDS a source address. None means "no source address". Unset would just be right for that (= tell the router to not use a specific address, like "unspecified").

If I say that a configuration value should be "none", I expect this "none" to be in the configuration, which is not. It's also not possible to clear this value with set update-source="".
Last edited by patrick7 on Thu Aug 25, 2016 4:27 pm, edited 1 time in total.
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 5921
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 25, 2016 2:54 pm

Parameter is for custom update-source. What custom update-source to use? None. So perfectly valid option. And as I mentioned in previous post, unset works on specific parameters which can be seen by typing unset 0 <tab>, update-source is also not one of them.
 
patrick7
Member Candidate
Member Candidate
Posts: 298
Joined: Sat Jul 20, 2013 2:40 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Aug 25, 2016 2:59 pm

Don't really see the sense behind that, but ok......
In my opinion, it should also be possible to unset (make empty) "custom" values. Because in the configuration you don't see the "none" so it's like "empty" or "not set".
 
alexjhart
Member Candidate
Member Candidate
Posts: 191
Joined: Thu Jan 20, 2011 8:03 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Aug 26, 2016 1:27 am

*) snmp - added script table which executes script and returns it's output on get request;

Please explain how to use this feature, because I cannot find it in the user interface...
I too am looking for more information. Don't see anything in the wiki yet?
-----
Alex Hart

The Brothers WISP
 
Motorbreath
just joined
Posts: 13
Joined: Fri Aug 26, 2016 1:22 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Aug 26, 2016 1:27 pm

I get a pretty different signal strenght between 6.36.2 and 6.37rc22, all the settings are the same...can someone please explain?

Image
Image

Edit: It's a pretty significant drop in Signal Strenght on 6.37rc22, was the same with previous 6.37rc's. As soon as I get back to 6.36.2 everything is back to normal.
 
User avatar
pukkita
Trainer
Trainer
Posts: 2982
Joined: Wed Dec 04, 2013 11:09 am
Location: Spain

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Aug 26, 2016 2:21 pm

Have you tried resetting the wireless config and redoing it? Is your RB firmware up to date?
Simplicity is the Ultimate Sophistication - Da Vinci
Getting the most out of this forum
 
Motorbreath
just joined
Posts: 13
Joined: Fri Aug 26, 2016 1:22 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Aug 26, 2016 3:24 pm

Have you tried resetting the wireless config and redoing it? Is your RB firmware up to date?
Yes, tried resetting config, and the RB fw is up to date. Mikrotik responded that it could be a new way signal strenght is calculated...
 
User avatar
pukkita
Trainer
Trainer
Posts: 2982
Joined: Wed Dec 04, 2013 11:09 am
Location: Spain

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Aug 26, 2016 11:59 pm

I think I noticed that, but related to chain numbers... maybe the case as you have only one chain. Have you tested the link to see if there are actual performance differences?
Simplicity is the Ultimate Sophistication - Da Vinci
Getting the most out of this forum
 
Motorbreath
just joined
Posts: 13
Joined: Fri Aug 26, 2016 1:22 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Aug 27, 2016 12:27 am

I think I noticed that, but related to chain numbers... maybe the case as you have only one chain. Have you tested the link to see if there are actual performance differences?
performance seems to be the same, all signal led lights are still on my Groove...

Noise floor goes to -92 dBm, signal to noise 37 dB on 6.37rc22 and on the current 6.36.2 it's -97 dBm and 48 dB signal noise... I am back on stable version for now
 
Kevo
Frequent Visitor
Frequent Visitor
Posts: 51
Joined: Wed Oct 12, 2011 1:38 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Aug 27, 2016 6:19 am

48db signal to noise sounds just about impossible in the real world on unlicensed freq. We have licensed links running under -50 that don't see 48db SNR. I would guess the first set of numbers are more accurate.
 
Motorbreath
just joined
Posts: 13
Joined: Fri Aug 26, 2016 1:22 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Aug 27, 2016 9:51 am

48db signal to noise sounds just about impossible in the real world on unlicensed freq. We have licensed links running under -50 that don't see 48db SNR. I would guess the first set of numbers are more accurate.
So we (using Groove) had false info for wireless signal strenght this whole time? MikroTik, what did you change for the RC versions so it shows different signal quality? A bug, or?
 
User avatar
pukkita
Trainer
Trainer
Posts: 2982
Joined: Wed Dec 04, 2013 11:09 am
Location: Spain

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Aug 27, 2016 12:01 pm

To enhance those wireless values precision. They're crucial in order to tune and troubleshoot wireless links.

Remember a 3dB diference is actually a double increase or a half decrease...
Simplicity is the Ultimate Sophistication - Da Vinci
Getting the most out of this forum
 
Motorbreath
just joined
Posts: 13
Joined: Fri Aug 26, 2016 1:22 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Aug 27, 2016 2:41 pm

To enhance those wireless values precision. They're crucial in order to tune and troubleshoot wireless links.

Remember a 3dB diference is actually a double increase or a half decrease...
OK, but what I need is someone from MikroTik to confirm that it isn't just a bug that will come into the next stable version.
 
vikibhai
just joined
Posts: 11
Joined: Mon Sep 08, 2014 7:44 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Aug 27, 2016 3:01 pm

i have 2 basebox and both have latest packages 6.37 rc22.....problem with TX RX CHAIN...i test multipal combination chains.....
chain 1 not working..check its if its have a firmware bug
 
vikibhai
just joined
Posts: 11
Joined: Mon Sep 08, 2014 7:44 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Aug 27, 2016 4:44 pm

 
raffav
Member Candidate
Member Candidate
Posts: 288
Joined: Wed Oct 24, 2012 4:40 am

Re: RE: Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Aug 27, 2016 5:01 pm

Just a silly question
It not to check TX and RX on both chain?


Enviado de meu XT1580 usando Tapatalk
 
vikibhai
just joined
Posts: 11
Joined: Mon Sep 08, 2014 7:44 pm

Re: RE: Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Aug 27, 2016 5:16 pm

Just a silly question
It not to check TX and RX on both chain?


Enviado de meu XT1580 usando Tapatalk

what silly i have click on tx chain 1 and u see on my image there my registered client not having a chain1 sgnal...zoom it see clearly
 
raffav
Member Candidate
Member Candidate
Posts: 288
Joined: Wed Oct 24, 2012 4:40 am

Re: RE: Re: RE: Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Aug 27, 2016 5:30 pm

Just a silly question
It not to check TX and RX on both chain?


Enviado de meu XT1580 usando Tapatalk

what silly i have click on tx chain 1 and u see on my image there my registered client not having a chain1 sgnal...zoom it see clearly
No
On your 1 print
You check chain 0 TX and RX
chain 1 only Rx is checked
On 2 print on chain 1 only TX is checked

My silly question was
the correct way is not to check both TX and RX on both chain 01

Enviado de meu XT1580 usando Tapatalk
 
Zorro
Long time Member
Long time Member
Posts: 676
Joined: Wed Apr 16, 2014 2:43 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Aug 27, 2016 5:56 pm

can there be some detail "unnecessary CPU usage in simple queues", eg not sources code of course but explanations a bit ?
eg that not Break things, that several recent "improvements"/hacks did with netstack in many vendors starting from intel itself?
(so in result despite being CPU-savvy queues that Heavily rely on hashing, say sfq/hfq(and derivatives), pcq, retro-forks of stochastic blue and several other - start behaving erratic, unreliable or at-least less efficient than before. at-least potentially - they can).
 
vikibhai
just joined
Posts: 11
Joined: Mon Sep 08, 2014 7:44 pm

Re: RE: Re: RE: Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Aug 27, 2016 6:31 pm

Just a silly question
It not to check TX and RX on both chain?


Enviado de meu XT1580 usando Tapatalk

what silly i have click on tx chain 1 and u see on my image there my registered client not having a chain1 sgnal...zoom it see clearly
No
On your 1 print
You check chain 0 TX and RX
chain 1 only Rx is checked
On 2 print on chain 1 only TX is checked

My silly question was
the correct way is not to check both TX and RX on both chain 01

Enviado de meu XT1580 usando Tapatalk

dear brother .... i did not post here what is corect way to check..my basicaly point to show chain 1 not working...here i tel u why.....i have mostly speed issue through that...so i test it deeply why it happen ,mostly only with these devcies....so i decide to check chains....
device have tx and rx wht ever i select on chain..but should have click on tx and rx for receiving and sending data...
1)when i checked on "TX AND RX ON CHAIN 0" my system connect with my accesspoint and i use my internet and shering services...device working on single chain..
2)and when i checked on "TX AND RX ON CHAIN 1" then my system not connected with my accesspoint....thats show chain 1 not working....
3)in images i show the behaviour of chain 1 .... when i click on TX "CHAIN 1" with tx and rx chain0 ..my system connected with it and show the chain0 and chain 1 sgnal on registered client properties..giving sgnal its not the sign that device transfer the data through chain 1...and anotherway when i checked on tx and rx chain 0 and rx only chain 1 ..then also my system conet with my accesspoint..and regitered client properties not show the chain 1 signal....i hope some admin note it ....if i am rong then correct me...
 
raffav
Member Candidate
Member Candidate
Posts: 288
Joined: Wed Oct 24, 2012 4:40 am

Re: RE: Re: RE: Re: RE: Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Aug 27, 2016 11:10 pm

Just a silly question
It not to check TX and RX on both chain?


Enviado de meu XT1580 usando Tapatalk

what silly i have click on tx chain 1 and u see on my image there my registered client not having a chain1 sgnal...zoom it see clearly
No
On your 1 print
You check chain 0 TX and RX
chain 1 only Rx is checked
On 2 print on chain 1 only TX is checked

My silly question was
the correct way is not to check both TX and RX on both chain 01

Enviado de meu XT1580 usando Tapatalk

dear brother .... i did not post here what is corect way to check..my basicaly point to show chain 1 not working...here i tel u why.....i have mostly speed issue through that...so i test it deeply why it happen ,mostly only with these devcies....so i decide to check chains....
device have tx and rx wht ever i select on chain..but should have click on tx and rx for receiving and sending data...
1)when i checked on "TX AND RX ON CHAIN 0" my system connect with my accesspoint and i use my internet and shering services...device working on single chain..
2)and when i checked on "TX AND RX ON CHAIN 1" then my system not connected with my accesspoint....thats show chain 1 not working....
3)in images i show the behaviour of chain 1 .... when i click on TX "CHAIN 1" with tx and rx chain0 ..my system connected with it and show the chain0 and chain 1 sgnal on registered client properties..giving sgnal its not the sign that device transfer the data through chain 1...and anotherway when i checked on tx and rx chain 0 and rx only chain 1 ..then also my system conet with my accesspoint..and regitered client properties not show the chain 1 signal....i hope some admin note it ....if i am rong then correct me...
Ok
Now I understand the point, I also have a base 2 but it is controlled by capsman so I don't see that information
To see if that happens to I am using the last rc version


Enviado de meu XT1580 usando Tapatalk
 
vikibhai
just joined
Posts: 11
Joined: Mon Sep 08, 2014 7:44 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Sun Aug 28, 2016 10:00 pm

1)have 2 basebox2 with 6.37 rc22
2)i downgradge my basebox2 to 5.26....... both basebox downgrde successfulyy.but one of them having a licence issue...on every reboot..device changing the software id.....now i upgrade it to back 6.37rc22..got lisence back..why it happend one of my basebox2 device on 5.26...even 2nd basebox2 device working good with lisence
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8305
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Aug 29, 2016 2:30 am

can there be some detail "unnecessary CPU usage in simple queues", eg not sources code of course but explanations a bit ?
Simple Queue hashing algorithm had an issue which caused hash rebuilds. This caused additional CPU load. This fix affects all Simple Queue configurations but improvement depends on queue count and complexity.

This issue was found on Intel based x86 installation with ~6500 Simple Queues. Load after upgrade went down from 70-80% to 20-30%.
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
uldis
MikroTik Support
MikroTik Support
Posts: 3424
Joined: Mon May 31, 2004 2:55 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Aug 29, 2016 10:59 am

vikibhai, please contact support@mikrotik.com about your TX/RX chain0/chain1 signal reading problem. The problem of the signal not reading started with v6.37rc22?

Also please note that chain0 RX should always be enabled as chain0 is considered the main chain.
 
vikibhai
just joined
Posts: 11
Joined: Mon Sep 08, 2014 7:44 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Aug 29, 2016 7:10 pm

vikibhai, please contact support@mikrotik.com about your TX/RX chain0/chain1 signal reading problem. The problem of the signal not reading started with v6.37rc22?

Also please note that chain0 RX should always be enabled as chain0 is considered the main chain.
I already mail to support mikrotik...and i dnt think so it startex with 6.37rc22..i have speed issue from 1st day...mostly people said wirless giving bad reception...so i test deeply it and discover that issue...u saw img that i post link http://imgur.com/a/bJptd...i click on tx rx chain 0 and tx on chain 1....but in registerd client sgnl status client not have chain 1 sgnal...i downgradge to v5.26 both chain working good...but problem is here oly one basebox2 working ..2nd basebox giving license issue ..on erery reboot software id chage randomly...so i upgrate it back to 6.37rc22...is there any solution i downgradge it to 5.26 without licence error
 
User avatar
emils
MikroTik Support
MikroTik Support
Posts: 481
Joined: Thu Dec 11, 2014 8:53 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Aug 31, 2016 10:15 am

Version 6.37rc24 has been released.

Changes since 6.37rc22:

*) dhcpv6 - update DUID when system-id changes (solves problem when cloned VM retains the same DUID);
*) ipsec - don't log authtype mismatch as critical;
*) ipsec - fixed kernel crash when sha512 was used;
*) ipsec - fixed xauth parameter printing in terminal;
*) lte - added support for more dlink dwm-222 configurations;
*) lte - added zte K5008-Z back;
*) lte - fixed default channels for dlink dwm-157;
*) pppoe - fixed master interface l2mtu check, could result in assumption that master interface can handle 14 byte bigger packet than it actually can (broken in 6.36);
*) snmp - skip forbidden oids on getnext completion;
*) supout - fixed bug that could cause enormous size supout.rif files;
*) usb - fixed usb port reset on ether1 link changes on mAP 2n;

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
Motorbreath
just joined
Posts: 13
Joined: Fri Aug 26, 2016 1:22 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Aug 31, 2016 10:27 am

The issue I had with lower signal on than on current version on Groove is fixed in rc24... well done 8)
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1814
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Aug 31, 2016 12:19 pm

*) snmp - skip forbidden oids on getnext completion

What problems does this fix ?

I ask as we have had some issues with SNMP polling of RouterBoards causing stability issues.
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
User avatar
emils
MikroTik Support
MikroTik Support
Posts: 481
Joined: Thu Dec 11, 2014 8:53 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Aug 31, 2016 12:50 pm

SNMP would crash when accessing these oids. This particular issue was introduced in 6.37rc10.
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1814
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Aug 31, 2016 2:00 pm

Thanks Emils,

Its not the SNMP + Routing issue we have.
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
Zorro
Long time Member
Long time Member
Posts: 676
Joined: Wed Apr 16, 2014 2:43 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Aug 31, 2016 2:23 pm

also if there wasn't "standart" radar-detection sources-code/algorythm, mandatory/enforced to use - there was some possibility to slightly tune-down radar-detection in ROS to considerably reduce amount of complains/whine about, because erratic behavior, making it kinda unusuable in several cases(with dense EMI/side-bands/harmonics, usual for ubran area)
 
User avatar
emils
MikroTik Support
MikroTik Support
Posts: 481
Joined: Thu Dec 11, 2014 8:53 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Aug 31, 2016 4:00 pm

Version 6.37rc26 has been released.

Changes since 6.37rc24:

!) ethernet - added new loop-protect feature for ethernet,vlan,eoip,eoipv6 interfaces (http://wiki.mikrotik.com/wiki/Manual:Loop_Protect);
*) fastpath - fixed kernel crash on interface disable/remove;
*) fetch - fixed bug with incomplete files in https mode;
*) routing - improved kernel performance in setups with large routing tables;
*) snmp - require write permitions for script run table access;
*) sstp - now supports TLS_ECDHE algorithms;

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
User avatar
BartoszP
Forum Guru
Forum Guru
Posts: 1707
Joined: Mon Jun 16, 2014 1:13 pm
Location: Poland

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Aug 31, 2016 4:16 pm

Does not work for RB411
[admin@RB411_102] > interface ethernet
[admin@RB411_102] /interface ethernet>

.. -- go up to interface
blink -- Generate traffic to blink leds
cable-test --
comment -- Set comment for items
disable -- Disable items
edit --
enable -- Enable items
export -- Print or save an export script that can be used to restore configuration
find -- Find items by value
get -- Gets value of item's property
monitor -- Monitor interface status
print -- Print values of item properties
reset-counters --
reset-mac-address --
set -- Change item properties
switch --


[admin@RB411_102] /interface ethernet>
Real admins use real keyboards.
 
patrick7
Member Candidate
Member Candidate
Posts: 298
Joined: Sat Jul 20, 2013 2:40 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Aug 31, 2016 4:17 pm

About loop protect: How is that handled if interface is in a bridge / switch group?
How is routing performance improved?
 
User avatar
bajodel
Long time Member
Long time Member
Posts: 545
Joined: Sun Nov 24, 2013 8:30 am
Location: Italy

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Sep 02, 2016 2:41 am

Seems like ipip tunnels not working if fastpath is enabled (if I disable fastpath locally on ipip interface or globally tunnels works)
 
alexjhart
Member Candidate
Member Candidate
Posts: 191
Joined: Thu Jan 20, 2011 8:03 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Sep 02, 2016 2:49 am

About loop protect: How is that handled if interface is in a bridge / switch group?
How is routing performance improved?
Yeah, I'm wondering if this can help with the CRS shortcoming (no STP for switch group ports). I haven't purchased CRS yet because of this.
-----
Alex Hart

The Brothers WISP
 
alexjhart
Member Candidate
Member Candidate
Posts: 191
Joined: Thu Jan 20, 2011 8:03 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Sep 02, 2016 2:55 am

*) snmp - added script table which executes script and returns it's output on get request;

Please explain how to use this feature, because I cannot find it in the user interface...
I too am looking for more information. Don't see anything in the wiki yet?
@emils maybe?
-----
Alex Hart

The Brothers WISP
 
irghost
Member Candidate
Member Candidate
Posts: 280
Joined: Sun Feb 21, 2016 1:49 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Sep 02, 2016 7:17 am

!) ethernet - added new loop-protect feature for ethernet,vlan,eoip,eoipv6 interfaces (http://wiki.mikrotik.com/wiki/Manual:Loop_Protect);
where?
I cant find it ! (/interface ethernet)
MTCNA MTCRE MTCTCE MTCUME MTCWE MTCIPv6E MTCINE
 
User avatar
emils
MikroTik Support
MikroTik Support
Posts: 481
Joined: Thu Dec 11, 2014 8:53 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Sep 02, 2016 9:37 am

This is just the initial release for this new feature. We are still polishing it, writing documentation and fixing some bugs. Until it is done, you will have to explore it by yourselves.

irghost, are you sure you have the latest release candidate version installed? On what RouterBOARD you can not find this function?
 
pe1chl
Forum Guru
Forum Guru
Posts: 5722
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Sep 02, 2016 10:52 am

This is just the initial release for this new feature. We are still polishing it, writing documentation and fixing some bugs. Until it is done, you will have to explore it by yourselves.
(I presume this is about the snmp script table)

Can you at least indicate where this feature can be found in the command structure?
I have been looking in /system script and in /snmp but I have been unable to find any command or option referring to a script table.
 
Zorro
Long time Member
Long time Member
Posts: 676
Joined: Wed Apr 16, 2014 2:43 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Sep 02, 2016 10:55 am

not sure in which of latest RC's, but port scans detection - working again. (most stealth scans ~ reliably detected now as before).
that good/essential, IMHO.
 
User avatar
emils
MikroTik Support
MikroTik Support
Posts: 481
Joined: Thu Dec 11, 2014 8:53 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Sep 02, 2016 2:44 pm

Version 6.37rc27 has been released.

Changes since 6.37rc26:

*) dude - (changes discussed here: http://forum.mikrotik.com/viewtopic.php?f=8&t=110424);
*) ethernet - allow to force mtu value when actual-mtu is already the same;
*) ethernet - rb44ge now have disabled-running-check=no by default;
*) ipsec - fixed dynamic policy not deleted on disconnect for nat-t peers;
*) kvm - fix add/remove of disabled interfaces;
*) lte - added rndis for ZTE MF8xx;
*) lte - adjusted usb config for dlink dwm-157 D;
*) mpls - fixed vpls throughput issues caused by out-of-order packets;
*) usermanager - fixed rare crash on paypal payment;

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1721
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Sep 02, 2016 2:45 pm

Can you at least indicate where this feature can be found in the command structure?
I have been looking in /system script and in /snmp but I have been unable to find any command or option referring to a script table.
under interfaces.
/interface ethernet set <tab><tab> 
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.
 
pe1chl
Forum Guru
Forum Guru
Posts: 5722
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Sep 02, 2016 3:00 pm

Can you at least indicate where this feature can be found in the command structure?
I have been looking in /system script and in /snmp but I have been unable to find any command or option referring to a script table.
under interfaces.
I am taliking about this:

*) snmp - added script table which executes script and returns it's output on get request;

Not this:

!) ethernet - added new loop-protect feature for ethernet,vlan,eoip,eoipv6 interfaces
 
paulct
Member Candidate
Member Candidate
Posts: 292
Joined: Fri Jul 12, 2013 5:38 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Sep 02, 2016 3:12 pm

*) routing - improved kernel performance in setups with large routing tables;

Interesting, where will the performance be felt? Loading of bgp peer routes? or?
 
rpingar
Long time Member
Long time Member
Posts: 539
Joined: Fri May 28, 2004 2:46 pm
Location: Italy

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Sep 05, 2016 10:27 am

to have it fixed (*) mpls - fixed vpls throughput issues caused by out-of-order packets;) do I have to upgrade only the termination tunnel or all the mpls chain????

regards
Ros
 
User avatar
emils
MikroTik Support
MikroTik Support
Posts: 481
Joined: Thu Dec 11, 2014 8:53 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Sep 05, 2016 10:43 am

rpingar, should be enough to upgrade only routers with VPLS endpoints.

pe1chl, you can download the latest Mikrotik.mib file and look for differences between the previous version. Mikrotik.mib.

paulct, any action with routing table should be faster now.
 
pe1chl
Forum Guru
Forum Guru
Posts: 5722
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Sep 05, 2016 12:35 pm

pe1chl, you can download the latest Mikrotik.mib file and look for differences between the previous version. Mikrotik.mib.
Thanks, I see the entries now.
I would have expected some command to add a OID and script name (or literal script) binding that OID to the script.
It now appears that all scripts in the existing script table fulfilling some criteria are callable via SNMP. Not sure if that is a good idea.
 
irghost
Member Candidate
Member Candidate
Posts: 280
Joined: Sun Feb 21, 2016 1:49 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Sep 05, 2016 12:57 pm

This is just the initial release for this new feature. We are still polishing it, writing documentation and fixing some bugs. Until it is done, you will have to explore it by yourselves.

irghost, are you sure you have the latest release candidate version installed? On what RouterBOARD you can not find this function?


yes last RC version ( RB2011)
MTCNA MTCRE MTCTCE MTCUME MTCWE MTCIPv6E MTCINE
 
User avatar
emils
MikroTik Support
MikroTik Support
Posts: 481
Joined: Thu Dec 11, 2014 8:53 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Sep 05, 2016 1:13 pm

irghost, Winbox support is not yet added, it is only available from terminal:
/interface ethernet set etherX loop-protect<tab>
 
User avatar
emils
MikroTik Support
MikroTik Support
Posts: 481
Joined: Thu Dec 11, 2014 8:53 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 06, 2016 3:31 pm

Version 6.37rc30 has been released.

Changes since 6.37rc27:

*) dns - fixed crash when using regexp static dns entries;
*) dude - (changes discussed here: http://forum.mikrotik.com/viewtopic.php?f=8&t=110424);
*) ethernet - fixed loop-protect on bridged ports;
*) ethernet - fixed neverending loop in CDP packet processing;
*) ipv6 - show multiple neighbors with the same address;
*) kvm - fixed guest crashing when using MTU bigger than 1504;
*) leds - added option to disable all leds on RBcAP2n;
*) lte - added switch for Huawei K5160;
*) lte - fixed band unsetting;
*) pppoe - fixed disconnects by idle timeout when fastpath is used;
*) rb3011 - fixed rare occasions when router would hang while loading kernel;
*) sfp - fixed initial eeprom reading on CCR1036-8G-2S+ and CCR1072-1G-8S+;
*) trafficgen - add per stream packet count setting;
*) tunnel - fixed link status flapping when remote end is not responding (introduced in 6.37rc);
*) tunnel - increased minimal MRRU to 1500 for PPP interfaces;
*) webfig - fixed certificate signing;
*) winbox - added auto refresh for BFD neighbors;
*) winbox - added comment field support for switch vlan menu;
*) winbox - adjusted allowed values for http-proxy field;
*) winbox - disabled MRRU by default for PPP interfaces;
*) winbox - removed L2MTU field for PPP interfaces;
*) winbox - removed unset button for L2MTU field;

All known wireless package issues after system upgrade should be fixed now.

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1721
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 06, 2016 3:36 pm

All known wireless package issues after system upgrade should be fixed now.
Just upgraded board from 6.35.4, with 4 wireless packages on it -fp and -cm2 (in bundle) -cm2 and -rep separately, enabled -rep.
Upgrade went without issues have one "wireless" in the bundle, enabled, with configuration intact. Good Job!
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.
 
MartijnVdS
Frequent Visitor
Frequent Visitor
Posts: 93
Joined: Wed Aug 13, 2014 9:36 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 06, 2016 4:25 pm

How does the new automatic DFS setting work in relation to CAPsMANv2?

As far as I know, DFS did not work when using CAPsMANv2. Has this changed? Do CAPs now run DFS checks if you use a frequency on which DFS is required?
 
Beone
Member Candidate
Member Candidate
Posts: 243
Joined: Fri Feb 11, 2011 1:11 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 06, 2016 8:07 pm

We've noticed that multicast forwarding isn't working anymore since v6.37rc27 previous RCs where working. Rollback to v6.34.6 works perfect
 
notToNew
Member Candidate
Member Candidate
Posts: 147
Joined: Fri Feb 19, 2016 3:15 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Sep 07, 2016 3:57 pm

Feature request for wireless-package:

As we have the mode "aligment only", I'd like to have a mode "Virtual only".
I often use the new combination of the wireless-rep package and configure one device as a station, and a virtual-device as a bridge-ap.
Now, wenn the station doesn't get a connection, it also disables the virtual bridge-ap-device.
As a workaround, I configure 2 virtual devices, the station AND the bridge. Now, what should I do with the master-device?
As solution I suggest 2 things:
1. Don't disable virtual devices if the master device (as station) doesn't get a connection.
2. Add the mode "Virtual only" for the master-device.
--------------------------------------------------------------------------------------------
CCR1036-12G-4S, several 952Ui-5ac2nD, ...
 
User avatar
emils
MikroTik Support
MikroTik Support
Posts: 481
Joined: Thu Dec 11, 2014 8:53 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Sep 07, 2016 5:08 pm

Version 6.37rc32 has been released.

Changes since 6.37rc30:

*) dude - (changes discussed here: viewtopic.php?f=8&t=110424);
*) ipv6 - improved system responsiveness when ipv6 routes are frequently modified;
*) lte - added switch for Huawei K5160;
*) ppp - use default-route-distance when adding ipv6 default route;
*) quickset - added 2GHz-g/n band support;
*) quickset - fixed guest reporting in "home ap dual" mode;
*) quickset - fixed wireless frequency fields in "home ap dual" mode;
*) trafficgen - show out-of-order packet counters in stats printouts;
*) tunnel - fixed ipv6 link-local address adding for gre;
*) users - fixed script policy checking against user policies when running scripts;
*) winbox - added default-authentication parameter for wireless station modes;
*) winbox - adjust on-event field dynamically depending on window size;
*) winbox - display actual-mtu for tunnels in interfaces window;
*) winbox - fixed multiline read only fields not displaying new line characters;
*) winbox - fixed raw firewall showing jump targets from filter chains;
*) winbox - removed health menu from devices that do not support it;
*) winbox - removed L2MTU field from PPP server binding settings;
*) winbox - show firmware-type in routerboard window;

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
pe1chl
Forum Guru
Forum Guru
Posts: 5722
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Sep 07, 2016 5:13 pm

Feature request for wireless-package:

As we have the mode "aligment only", I'd like to have a mode "Virtual only".
I agree with this! I use wireless-rep without a direct bridge as setup when using it as a repeater.
The station should connect to a WiFi AP, then I setup a VPN over that link, and the VPN network is offered on the bridge-ap configured using wireless-rep.
It is very inconvenient that the bridge-ap does not work when the station is not connected, e.g. you want to set the password on the station
by logging in to the MikroTik. That is now only possible using a cable.

(of course I understand the trouble beneath this: when the station is not connected it will be scanning the frequencies to find an AP,
and the bridge-ap is using the same hardware so the same frequency, which is not stable then. however, with dual-chain devices
or some clever timeouts this can probably be solved?)
 
notToNew
Member Candidate
Member Candidate
Posts: 147
Joined: Fri Feb 19, 2016 3:15 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Sep 07, 2016 6:32 pm

Another finding:
It is somehow unclear if you set the master-wifi-device to bridge and the virtual-device to bridge-ap,
the limitation of the master-device to allow only 1 connected device wins.
Changing the master-device to bridge-ap solved my problem.
So please add in the documentation (or fix that limitation)

I wondered for several hours why it is not possible to connect more than 1 wireless device at the same time while not getting any error-logs...
--------------------------------------------------------------------------------------------
CCR1036-12G-4S, several 952Ui-5ac2nD, ...
 
jarda
Forum Guru
Forum Guru
Posts: 7602
Joined: Mon Oct 22, 2012 4:46 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Sep 07, 2016 10:07 pm

Feature request for wireless-package:

As we have the mode "aligment only", I'd like to have a mode "Virtual only".
I agree with this! I use wireless-rep without a direct bridge as setup when using it as a repeater.
The station should connect to a WiFi AP, then I setup a VPN over that link, and the VPN network is offered on the bridge-ap configured using wireless-rep.
It is very inconvenient that the bridge-ap does not work when the station is not connected, e.g. you want to set the password on the station
by logging in to the MikroTik. That is now only possible using a cable.

(of course I understand the trouble beneath this: when the station is not connected it will be scanning the frequencies to find an AP,
and the bridge-ap is using the same hardware so the same frequency, which is not stable then. however, with dual-chain devices
or some clever timeouts this can probably be solved?)
I would like to have it too. Very useful.
 
tnakir
Frequent Visitor
Frequent Visitor
Posts: 54
Joined: Thu Aug 19, 2010 4:29 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Sep 09, 2016 1:02 pm

I am having a problem with wireless-rep package on RB2011UiAS-2HnD-IN when using 2.4 band (I tried all the channel widths) on my laptop.

When my Logitech Unifying receiver (mouse) is connected to my laptop's USB, my CCQ drops to 20%. When I unplug it, i get 90+%.

When I use older packages, I don't get interference. In both cases I am using auto frequency (I also tried to change channels manually and it didn't help).

Any ideas?
 
RyperX
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Thu May 21, 2015 11:14 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Sep 10, 2016 10:18 pm

Latest RC is working fine on rb2011
Last edited by RyperX on Sun Sep 11, 2016 10:25 am, edited 3 times in total.
 
jondavy
Member Candidate
Member Candidate
Posts: 125
Joined: Tue May 12, 2009 11:14 pm
Location: Brasil

Re: v6.37rc [release candidate] is released, only one wireless package!

Sun Sep 11, 2016 1:45 am

Romon neighbor bug:
when the identity is too long it appears as mikrotik into romon neighbor

and also the option to port forbid not working
 
hedele
Member
Member
Posts: 338
Joined: Tue Feb 24, 2009 11:23 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Sep 12, 2016 5:43 pm

Wow... greatly reduced CPU load over previous versions on devices with large routing tables! Also a CCR1016 does no longer produce packet loss in general packet forwarding when a single CPU core is stuck at 100%
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6615
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 13, 2016 1:33 pm

Version 6.37rc34 has been released,

Changes since 6.37rc32:

*) capsman - fixed kernel crash on cap while changing client-to-client forwarding;
*) dhcpv6 - improved interface status tracking;
*) dude - (changes discussed here: viewtopic.php?f=8&t=110424);
*) gps - always check NMEA checksum if available;
*) ipv6 - fixed RA and RS processing on new interfaces after many interfaces have lost link during prolonged operation;
*) mpls - fixed memory leak;
*) packages - fixed situation when it was impossible to disable ipv6 package (introduced in v6.37rc3x);
*) ppp,lte - pin is now converted to string argument;
*) supout - improved crash report generation for tile architecture;

If you experience version related issues, then please contact MikroTik support (support@mikrotik.com) and send supout file from your router. File must be generated while router is not working as suspected or after crash
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1814
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 13, 2016 2:09 pm

*) mpls - fixed memory leak;
Hi Sergejs + Team,

Can you please provide more detail on this fix. Specifically what the triggers for the memory leak were, this way we can know exactly what problems it will solve.

Thanks!
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1721
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 13, 2016 4:02 pm

Hi Sergejs + Team,
Can you please provide more detail on this fix. Specifically what the triggers for the memory leak were, this way we can know exactly what problems it will solve.
Thanks!
Lately changelog is as precise as they are willing/allowed to answer. for example - you wouldn't like them to reveal information that can potentially be used to trigger this on purpose. Especially while the fix is only in RC versions. Questions like this are dangerous.
Question here is simple, have you noticed or not some memory leaks in your mpls setups? If yes - upgrade.
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6615
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 13, 2016 4:16 pm

nz_monkey,
We had ticket with MPLS configuration, that produced memory leak. This is fixed, however it is actual for very specific configurations. And I do not have to add more that previous poster replied.
 
amokkatmt
newbie
Posts: 30
Joined: Mon Oct 24, 2011 3:31 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 13, 2016 5:38 pm

I can't disable wireless package on RB750GL since some of rc's.
17:24:09 system,info package wireless@ is scheduled for disable by ***
17:24:18 system,info disabled wireless@-6.37rc34 
17:24:21 system,info router rebooted 
And after this reboot:
/system package print terse where disabled=no name=wireless
 0   name=wireless version=6.37rc34 build-time=sep/12/2016 13:06:07 scheduled="" bundle=routeros-mipsbe
 
jarda
Forum Guru
Forum Guru
Posts: 7602
Joined: Mon Oct 22, 2012 4:46 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 13, 2016 5:47 pm

Using package bundle by default is very bad approach of mikrotik for years. Better to install separate packages instead of bundle. Never mind it should be possible to disable bundled packages too.
 
Tonda
Member Candidate
Member Candidate
Posts: 162
Joined: Thu Jun 30, 2005 12:59 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 13, 2016 6:11 pm

I have the same problem with disabling wireless package at RB750UP. To be honest - I do not understand, why it is even possible to install or enable/disable wireless package on device, which never had and will never have any kind of WiFi device inside? I think more examples can be found among Routerboard devices.
 
jarda
Forum Guru
Forum Guru
Posts: 7602
Joined: Mon Oct 22, 2012 4:46 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 13, 2016 10:13 pm

because you can use such device as capsman - so you need the wireless package.
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1814
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Sep 14, 2016 8:10 am

nz_monkey,
We had ticket with MPLS configuration, that produced memory leak. This is fixed, however it is actual for very specific configurations. And I do not have to add more that previous poster replied.
Thanks Sergejs, macgaiver perfectly explained with a context I had not thought about.
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
JHV
just joined
Posts: 11
Joined: Mon Feb 01, 2016 8:27 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Sep 14, 2016 9:53 pm

Version 6.37rc34 has been released,

Changes since 6.37rc32:

*) dhcpv6 - improved interface status tracking;
DHCPv6 still does not work like before v 6.33.6.

If a disconnect occurs, DHCPv6 stays for 10 minutes in state renewing and for another 10 minutes in state rebinding. It takes exactly 20 minutes until a new prefix could be obtained.
Please see also this thread.
 
juhos
just joined
Posts: 3
Joined: Thu May 28, 2015 3:21 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Sep 17, 2016 3:03 pm

Hi guys!
*) modem - added d-link dwm-222 support;
Can anyone help me with this? I have one dwm-222 modem but it not seems like work. The router only see the "Mobile connect"(cd drive for progs on pc).
Im trying on HAP lite.
 
wispwest
Member
Member
Posts: 477
Joined: Tue May 19, 2009 3:48 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Sun Sep 18, 2016 10:28 pm

We had a few catostrophic wireless failures recently due to upgrading firmwares When it would come back, WLAN is disabled and lost all of its configuration as if ts a brand-new WLAN interface. Some of them didn't even show it, and needed the new wireless package enabled. Granted it wasn't clear enough what to do "prior" to the upgrade to the tech that was upgrading them.

It is understood now, but does still post some risks, would definitely be nice if the upgrade was full-automatic, which I understand is now happening the newest firmware? Aside from if you have multiple packages enabled, just make sure you disable one of them?
 
mistry7
Forum Guru
Forum Guru
Posts: 1283
Joined: Tue Oct 13, 2009 11:57 am
Location: Germany

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Sep 19, 2016 10:06 am

How to solve this?
How to remove the old used Wireless Pack?

Image
 
notToNew
Member Candidate
Member Candidate
Posts: 147
Joined: Fri Feb 19, 2016 3:15 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Sep 19, 2016 11:54 am

Is it possible to use the wireless-connect-list to connect to HIDDEN ssid's? Am I blind, or is there no possibility?
--------------------------------------------------------------------------------------------
CCR1036-12G-4S, several 952Ui-5ac2nD, ...
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Sep 19, 2016 1:28 pm

Version 6.37rc38 has been released,

Changes since 6.37rc36:

!) ethernet - added new loop-protect feature for ethernet,vlan,eoip,eoipv6 interfaces, http://wiki.mikrotik.com/wiki/Manual:Loop_Protect ;
*) dude - (changes discussed here: viewtopic.php?f=8&t=110424);
*) ipsec - fixed dynamic policy not deleted on disconnect for nat-t peers;

If you experience version related issues, then please contact MikroTik support (support@mikrotik.com) and send supout file from your router. File must be generated while router is not working as suspected or after crash
 
w0lt
Member
Member
Posts: 481
Joined: Wed Apr 02, 2008 2:12 pm
Location: Minnesota USA

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Sep 19, 2016 4:22 pm

Package list (Check For Updates) doesn't seem to grab the latest RC version.
MTCNA - 2011

" The Bitterness of Poor Quality Remains Long After the Sweetness of Low Price is Forgotten "
 
barracuda
just joined
Posts: 20
Joined: Thu Jul 09, 2015 12:41 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Sep 19, 2016 11:59 pm

Same here!
 
qiet72
just joined
Posts: 24
Joined: Thu Oct 09, 2014 10:23 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 12:31 am

Hi,

Currently running 6.37rc38 on a hAP ac. I noticed that my laptop with an Intel 7250 wireless card cannot seem to receive mimo (dual chain) at the higher rates of 802.11ac but works perfectly when connected to my Asus RT-AC68U router. The issue seems to only happen on receive (to laptop), not transmit (from laptop). Transmit works as expected with dual chain mimo. I have used the registration page in winbox and the "iw wlan0 station dump" linux command to get the info.

Have tried 6.34.6, 6.36.3 and this latest rc - all exibit the same issue. The Asus RT-AC68U router seems to use the Broadcom BCM4360 chipset.

Qiet72
 
User avatar
BartoszP
Forum Guru
Forum Guru
Posts: 1707
Joined: Mon Jun 16, 2014 1:13 pm
Location: Poland

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 9:13 am

6.37rc36 @ RB433 does not see rc38 for download.
Real admins use real keyboards.
 
qiet72
just joined
Posts: 24
Joined: Thu Oct 09, 2014 10:23 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 9:45 am

6.37rc36 @ RB433 does not see rc38 for download.
I stand corrected. Thank you. I will re-check the version and try again with latest.


Sent from my iPhone using Tapatalk
 
kristaps
Member Candidate
Member Candidate
Posts: 272
Joined: Mon Jan 27, 2014 1:37 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 10:44 am

How to solve this?
How to remove the old used Wireless Pack?

Image

Please use the Netinstall utility to reinstall the device:
http://wiki.mikrotik.com/wiki/Manual:Netinstall
 
andywright
just joined
Posts: 7
Joined: Tue May 10, 2016 5:20 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 12:00 pm

6.37rc38 on hAP AC

Trying to use QuickSet from Winbox in Home AP Dual mode - unable to save config as 'Band' always stays red whatever settings for 2GHz and 5GHz are chosen. Works ok from Web config page though.
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1721
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 2:59 pm

6.37rc38 on hAP AC

Trying to use QuickSet from Winbox in Home AP Dual mode - unable to save config as 'Band' always stays red whatever settings for 2GHz and 5GHz are chosen. Works ok from Web config page though.
what winbox loader version are you using?
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.
 
andywright
just joined
Posts: 7
Joined: Tue May 10, 2016 5:20 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 3:03 pm

Winbox 3.5
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 3:34 pm

Version 6.37rc40 has been released,

Changes since 6.37rc38:

*) dhcpv6 - reworked DHCP-PD server interface and route management;
*) tunnel - fixed communication via tunnel to router itself if fastpath was active;
*) wireless - fixed interface disappearance on upgrade to 6.37 (introduced in v6.37rc);

If you experience version related issues, then please contact MikroTik support (support@mikrotik.com) and send supout file from your router. File must be generated while router is not working as suspected or after crash
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 3:35 pm

andywright - This is an Winbox issue and will be fixed in next Winbox release.
 
andywright
just joined
Posts: 7
Joined: Tue May 10, 2016 5:20 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 3:39 pm

strods - many thanks :D
 
John39
just joined
Posts: 21
Joined: Mon Aug 08, 2016 11:17 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 4:42 pm

After upgrading to 6.37 RC 40 on the router where the wireless interface disappeared , he returned , although in support of said preparing to replace the router as the problem in the router .
 
rajo
newbie
Posts: 36
Joined: Tue Aug 16, 2011 11:12 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 5:16 pm

Is there any reason why NTP client still does not support DNS? It would be great if I could finally get rid of my script for this.
 
uldis
MikroTik Support
MikroTik Support
Posts: 3424
Joined: Mon May 31, 2004 2:55 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 5:24 pm

Is there any reason why NTP client still does not support DNS? It would be great if I could finally get rid of my script for this.
It is supported for a while already or you are looking some other setting:
/system ntp client set server-dns-names=NTP_SERVER_NAME
 
rajo
newbie
Posts: 36
Joined: Tue Aug 16, 2011 11:12 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 5:51 pm

It is supported for a while already or you are looking some other setting:
/system ntp client set server-dns-names=NTP_SERVER_NAME
I don't have server-dns-names as a configuration parameter. These are the options I have on MikroTik hardware:
[admin@MikroTik] > system ntp client set
enabled  mode  primary-ntp  secondary-ntp
Both primary-ntp and secondary-ntp require an IP address.
 
npero
Member
Member
Posts: 316
Joined: Tue Mar 01, 2005 1:59 pm
Location: Serbia

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 6:52 pm

Both primary-ntp and secondary-ntp require an IP address.
Do you maybe using ntp package ?

With ntp package
system ntp client set
enabled mode primary-ntp secondary-ntp
without
system ntp client set
enabled primary-ntp secondary-ntp server-dns-names
if you don't need ntp server don't have any reason to use ntp package.
 
rajo
newbie
Posts: 36
Joined: Tue Aug 16, 2011 11:12 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 7:17 pm

if you don't need ntp server don't have any reason to use ntp package.
Thanks! That was the issue.

@MikroTik, please fix the inconsistency. It doesn't make sense to me that the server-dns-names option should not be available with the NTP package installed.
 
pe1chl
Forum Guru
Forum Guru
Posts: 5722
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 7:37 pm

It doesn't make sense to me that the server-dns-names option should not be available with the NTP package installed.
It does make sense. The NTP package provides an NTP server and it works with fixed server addresses. Sure it would be
nice if there was the possibility to use DNS names there, but you should understand that in that case the DNS names would
be resolved only one time after router reboot. And there may even be dependency problems in that the router wants to set
the clock correctly before it has started the DNS resolver.

When running the router without NTP package, an SNTP implementation is used that can (when server-dns-names is used)
do an NTP lookup every time it requests the time, and the DNS name can return a different IP address every time. When that
is what you want (e.g. because you want to use the NTP pool), please use the SNTP implementation. Unfortunately, in that
case you cannot serve the time from the router.

I don't know which NTP server sourcecode MikroTik uses for the NTP server, and when it is the ntpd reference implementation,
if they will update to the latest version in RouterOS version 7. When they do, it would be possible to add a "pool-dns-name"
option to have both DNS resolution and server functionality.
 
rajo
newbie
Posts: 36
Joined: Tue Aug 16, 2011 11:12 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 8:16 pm

It does make sense. The NTP package provides an NTP server and it works with fixed server addresses. Sure it would be
nice if there was the possibility to use DNS names there, but you should understand that in that case the DNS names would
be resolved only one time after router reboot. And there may even be dependency problems in that the router wants to set
the clock correctly before it has started the DNS resolver.
I really don't buy this argument. What you describe is really an implementation rather than technical (or even best-practices) issue.
 
rzirzi
Member
Member
Posts: 377
Joined: Mon Oct 09, 2006 2:33 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 8:18 pm

Package list (Check For Updates) doesn't seem to grab the latest RC version.
Still the same problems... now the same with RC40...
 
pe1chl
Forum Guru
Forum Guru
Posts: 5722
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 9:57 pm

I really don't buy this argument. What you describe is really an implementation rather than technical (or even best-practices) issue.
It is the same in all NTP server implementations. NTP servers lock onto reference servers, and would not work OK when the actual
server changes for subsequent polls. So NTP server implementations lookup the DNS name only when started. SNTP is different.
 
qiet72
just joined
Posts: 24
Joined: Thu Oct 09, 2014 10:23 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 10:55 pm

6.37rc36 @ RB433 does not see rc38 for download.
OK, I have now updated to the latest rc (6.37rc40) by downloading from mikrotik.com/download and updating routeros manually.
I did the same test: Do a download via the 5Ghz 802.11ac. My hardware is an Intel 7260 a/b/g/n/ac adapter. When I download via my Asus RT-AC68U router which uses a Broadcom BCM4360 chipset, I get full mimo transfers at up to 866 Mb/s (actual transfer speed is about 320Mb/s). Unfortunately, when the Intel card is connected to the 5 Ghz hAP ac MikroTik router, then I only get a bitrate of 433Mb/s max (1 chain) on receiving or around 210Mb/s and 866 Mb/s (2 chains) on transmitting. Again, this issue happens also on 6.36.3 and 6.34.6 versions. Interestingly, the bug only happens when the receive signal is negotiate above 195 Mb/s.

Qiet72
 
Sob
Forum Guru
Forum Guru
Posts: 4545
Joined: Mon Apr 20, 2009 9:11 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Sep 21, 2016 1:14 am

NTP servers lock onto reference servers, and would not work OK when the actual
server changes for subsequent polls. So NTP server implementations lookup the DNS name only when started.
Let it work the same way as other ntp servers do, that's fine. No one asks for hostname being resolved again and again for each poll.

Current problem is that you have to put in numeric address instead of proper hostname, and if server moves somewhere else, RouterOS is stuck with old address. So you have to update config of all RouterOS clients, instead of updating only server's hostname. It's not right, since dns was invented to solve exactly this kind of problems.
People who quote full posts should be spanked with ethernet cable. Some exceptions for multi-topic threads may apply.
 
pe1chl
Forum Guru
Forum Guru
Posts: 5722
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Sep 21, 2016 11:44 am

I understand what you mean, but note that MikroTik routers do not usually have a hardware real time clock, so they need
to get their system time from an external source as soon as possible during startup. It might be that the NTP server is
started before the DNS resolver, I don't know details about that.

The problem is worsened by the fact that MikroTik allow only 2 NTP servers to be configured. This should IMHO be
extended to at least 4, better an "arbitrary" number as seen in other places (where you can just expand the value list).
Maybe the issue could be solved by adding the capability for at least 2 DNS names in addition to the existing 2 fixed
addresses, and the NTP server could delay the resolving of DNS names until it has DNS available.

Having some method of updating certain settings of a large number of MikroTik routers is a topic I am going to investigate
anyway, as I get more and more routers and require this as well. Probably some solutions exist using either the API
or an automated login to the ssh/telnet service.
 
RyperX
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Thu May 21, 2015 11:14 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Sep 21, 2016 1:44 pm

I updated to latest rc40 and i lost my complete interface configuration. (As i know i came from rc38)
All interfaces was resettet and every setting that had an interface applied was set to unknown.

Any idea what happen? Device rb2011
 
qiet72
just joined
Posts: 24
Joined: Thu Oct 09, 2014 10:23 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Sep 21, 2016 1:50 pm

6.37rc36 @ RB433 does not see rc38 for download.
OK, I have now updated to the latest rc (6.37rc40) by downloading from mikrotik.com/download and updating routeros manually.
I did the same test: Do a download via the 5Ghz 802.11ac. My hardware is an Intel 7260 a/b/g/n/ac adapter. When I download via my Asus RT-AC68U router which uses a Broadcom BCM4360 chipset, I get full mimo transfers at up to 866 Mb/s (actual transfer speed is about 320Mb/s). Unfortunately, when the Intel card is connected to the 5 Ghz hAP ac MikroTik router, then I only get a bitrate of 433Mb/s max (1 chain) on receiving or around 210Mb/s and 866 Mb/s (2 chains) on transmitting. Again, this issue happens also on 6.36.3 and 6.34.6 versions. Interestingly, the bug only happens when the receive signal is negotiate above 195 Mb/s.

Qiet72
I am considering adding screenshots to give a better idea of what I mean in case someone does not understand the problem. Unfortunately, I haven't figured out how to upload screenshots. If I try to insert an image, then it looks like it expects the image to exist already on the internet, but I would like upload the image from my computer - how do I do that on this forum?

Qiet72
 
qiet72
just joined
Posts: 24
Joined: Thu Oct 09, 2014 10:23 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Sep 21, 2016 2:12 pm

Is it possible to use the wireless-connect-list to connect to HIDDEN ssid's? Am I blind, or is there no possibility?
I seem to remember that you have to use the mac address of the ap you want to connect to instead of the ssid when you want to connect to a hidden access point.

Qiet72
 
notToNew
Member Candidate
Member Candidate
Posts: 147
Joined: Fri Feb 19, 2016 3:15 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Sep 21, 2016 6:05 pm

I seem to remember that you have to use the mac address of the ap you want to connect to instead of the ssid when you want to connect to a hidden access point.

Qiet72
Thanks for your answer, I tried it without success. My Ap has several hidden wifi with the same mac, so how can the microtik connection-list determine which
wifi to choose, when it has no information about the ssid? Maybe that's the reason why it didn't work in my test?
--------------------------------------------------------------------------------------------
CCR1036-12G-4S, several 952Ui-5ac2nD, ...
 
pe1chl
Forum Guru
Forum Guru
Posts: 5722
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Sep 21, 2016 7:14 pm

My Ap has several hidden wifi with the same mac
Ohh boy... that is not good! Did the AP allow you to configure it that way? Did you have to force it somehow?
 
Sob
Forum Guru
Forum Guru
Posts: 4545
Joined: Mon Apr 20, 2009 9:11 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Sep 21, 2016 7:53 pm

Maybe the issue could be solved by adding the capability for at least 2 DNS names in addition to the existing 2 fixed
addresses, and the NTP server could delay the resolving of DNS names until it has DNS available.
You may be overthinking it. DNS resolver in RouterOS is simple service, it must start up in no time. Making it a dependency for NTP client should not be a problem. And even if not, and NTP client was not able to resolve hostname, it would succeed a second later. No big deal to most users.

You can come up with some setup where hostnames wouldn't work. E.g. if your upstream DNS resolver would be only accessible using IPSec tunnel, which would have trouble starting with wrong system time. But it would be a special case and user/admin's responsibility to use the right configuration (i.e. in this case NTP client with numeric addresses only).
People who quote full posts should be spanked with ethernet cable. Some exceptions for multi-topic threads may apply.
 
Mikhail73
just joined
Posts: 10
Joined: Wed Sep 21, 2016 8:31 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Sep 21, 2016 8:43 pm

Does anyone have problems with recursive routing? I used this manual (Multiple host checking per Uplink), and everything works fine on first router. But exactly the same configuration (except gateways, of course) doesn't work on another two routers. When i add default route via virtual host 10.1.1.1, this route becomes active for several seconds, then becomes inactive. When i checked 10.1.1.1 (terminal-ip route check 10.1.1.1) - everything is ok. It seems to me, it's a bug. Tested on 6.36.2/6.36.3/6.47rc40.
Last edited by Mikhail73 on Thu Sep 22, 2016 5:07 am, edited 1 time in total.
 
qiet72
just joined
Posts: 24
Joined: Thu Oct 09, 2014 10:23 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Sep 21, 2016 8:59 pm

I seem to remember that you have to use the mac address of the ap you want to connect to instead of the ssid when you want to connect to a hidden access point.

Qiet72
Thanks for your answer, I tried it without success. My Ap has several hidden wifi with the same mac, so how can the microtik connection-list determine which
wifi to choose, when it has no information about the ssid? Maybe that's the reason why it didn't work in my test?
You say: "My Ap has several hidden wifi with the same mac" - do you mean you have multiple Virtual AP's with the same mac address beside the one physical AP?

Qiet72

Who is online

Users browsing this forum: No registered users and 11 guests