Community discussions

 
User avatar
pukkita
Trainer
Trainer
Posts: 2982
Joined: Wed Dec 04, 2013 11:09 am
Location: Spain

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Aug 27, 2016 12:01 pm

To enhance those wireless values precision. They're crucial in order to tune and troubleshoot wireless links.

Remember a 3dB diference is actually a double increase or a half decrease...
Simplicity is the Ultimate Sophistication - Da Vinci
Getting the most out of this forum
 
Motorbreath
just joined
Posts: 13
Joined: Fri Aug 26, 2016 1:22 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Aug 27, 2016 2:41 pm

To enhance those wireless values precision. They're crucial in order to tune and troubleshoot wireless links.

Remember a 3dB diference is actually a double increase or a half decrease...
OK, but what I need is someone from MikroTik to confirm that it isn't just a bug that will come into the next stable version.
 
vikibhai
just joined
Posts: 11
Joined: Mon Sep 08, 2014 7:44 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Aug 27, 2016 3:01 pm

i have 2 basebox and both have latest packages 6.37 rc22.....problem with TX RX CHAIN...i test multipal combination chains.....
chain 1 not working..check its if its have a firmware bug
 
vikibhai
just joined
Posts: 11
Joined: Mon Sep 08, 2014 7:44 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Aug 27, 2016 4:44 pm

 
raffav
Member Candidate
Member Candidate
Posts: 286
Joined: Wed Oct 24, 2012 4:40 am

Re: RE: Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Aug 27, 2016 5:01 pm

Just a silly question
It not to check TX and RX on both chain?


Enviado de meu XT1580 usando Tapatalk
 
vikibhai
just joined
Posts: 11
Joined: Mon Sep 08, 2014 7:44 pm

Re: RE: Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Aug 27, 2016 5:16 pm

Just a silly question
It not to check TX and RX on both chain?


Enviado de meu XT1580 usando Tapatalk

what silly i have click on tx chain 1 and u see on my image there my registered client not having a chain1 sgnal...zoom it see clearly
 
raffav
Member Candidate
Member Candidate
Posts: 286
Joined: Wed Oct 24, 2012 4:40 am

Re: RE: Re: RE: Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Aug 27, 2016 5:30 pm

Just a silly question
It not to check TX and RX on both chain?


Enviado de meu XT1580 usando Tapatalk

what silly i have click on tx chain 1 and u see on my image there my registered client not having a chain1 sgnal...zoom it see clearly
No
On your 1 print
You check chain 0 TX and RX
chain 1 only Rx is checked
On 2 print on chain 1 only TX is checked

My silly question was
the correct way is not to check both TX and RX on both chain 01

Enviado de meu XT1580 usando Tapatalk
 
Zorro
Long time Member
Long time Member
Posts: 676
Joined: Wed Apr 16, 2014 2:43 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Aug 27, 2016 5:56 pm

can there be some detail "unnecessary CPU usage in simple queues", eg not sources code of course but explanations a bit ?
eg that not Break things, that several recent "improvements"/hacks did with netstack in many vendors starting from intel itself?
(so in result despite being CPU-savvy queues that Heavily rely on hashing, say sfq/hfq(and derivatives), pcq, retro-forks of stochastic blue and several other - start behaving erratic, unreliable or at-least less efficient than before. at-least potentially - they can).
 
vikibhai
just joined
Posts: 11
Joined: Mon Sep 08, 2014 7:44 pm

Re: RE: Re: RE: Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Aug 27, 2016 6:31 pm

Just a silly question
It not to check TX and RX on both chain?


Enviado de meu XT1580 usando Tapatalk

what silly i have click on tx chain 1 and u see on my image there my registered client not having a chain1 sgnal...zoom it see clearly
No
On your 1 print
You check chain 0 TX and RX
chain 1 only Rx is checked
On 2 print on chain 1 only TX is checked

My silly question was
the correct way is not to check both TX and RX on both chain 01

Enviado de meu XT1580 usando Tapatalk

dear brother .... i did not post here what is corect way to check..my basicaly point to show chain 1 not working...here i tel u why.....i have mostly speed issue through that...so i test it deeply why it happen ,mostly only with these devcies....so i decide to check chains....
device have tx and rx wht ever i select on chain..but should have click on tx and rx for receiving and sending data...
1)when i checked on "TX AND RX ON CHAIN 0" my system connect with my accesspoint and i use my internet and shering services...device working on single chain..
2)and when i checked on "TX AND RX ON CHAIN 1" then my system not connected with my accesspoint....thats show chain 1 not working....
3)in images i show the behaviour of chain 1 .... when i click on TX "CHAIN 1" with tx and rx chain0 ..my system connected with it and show the chain0 and chain 1 sgnal on registered client properties..giving sgnal its not the sign that device transfer the data through chain 1...and anotherway when i checked on tx and rx chain 0 and rx only chain 1 ..then also my system conet with my accesspoint..and regitered client properties not show the chain 1 signal....i hope some admin note it ....if i am rong then correct me...
 
raffav
Member Candidate
Member Candidate
Posts: 286
Joined: Wed Oct 24, 2012 4:40 am

Re: RE: Re: RE: Re: RE: Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Aug 27, 2016 11:10 pm

Just a silly question
It not to check TX and RX on both chain?


Enviado de meu XT1580 usando Tapatalk

what silly i have click on tx chain 1 and u see on my image there my registered client not having a chain1 sgnal...zoom it see clearly
No
On your 1 print
You check chain 0 TX and RX
chain 1 only Rx is checked
On 2 print on chain 1 only TX is checked

My silly question was
the correct way is not to check both TX and RX on both chain 01

Enviado de meu XT1580 usando Tapatalk

dear brother .... i did not post here what is corect way to check..my basicaly point to show chain 1 not working...here i tel u why.....i have mostly speed issue through that...so i test it deeply why it happen ,mostly only with these devcies....so i decide to check chains....
device have tx and rx wht ever i select on chain..but should have click on tx and rx for receiving and sending data...
1)when i checked on "TX AND RX ON CHAIN 0" my system connect with my accesspoint and i use my internet and shering services...device working on single chain..
2)and when i checked on "TX AND RX ON CHAIN 1" then my system not connected with my accesspoint....thats show chain 1 not working....
3)in images i show the behaviour of chain 1 .... when i click on TX "CHAIN 1" with tx and rx chain0 ..my system connected with it and show the chain0 and chain 1 sgnal on registered client properties..giving sgnal its not the sign that device transfer the data through chain 1...and anotherway when i checked on tx and rx chain 0 and rx only chain 1 ..then also my system conet with my accesspoint..and regitered client properties not show the chain 1 signal....i hope some admin note it ....if i am rong then correct me...
Ok
Now I understand the point, I also have a base 2 but it is controlled by capsman so I don't see that information
To see if that happens to I am using the last rc version


Enviado de meu XT1580 usando Tapatalk
 
vikibhai
just joined
Posts: 11
Joined: Mon Sep 08, 2014 7:44 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Sun Aug 28, 2016 10:00 pm

1)have 2 basebox2 with 6.37 rc22
2)i downgradge my basebox2 to 5.26....... both basebox downgrde successfulyy.but one of them having a licence issue...on every reboot..device changing the software id.....now i upgrade it to back 6.37rc22..got lisence back..why it happend one of my basebox2 device on 5.26...even 2nd basebox2 device working good with lisence
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8305
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Aug 29, 2016 2:30 am

can there be some detail "unnecessary CPU usage in simple queues", eg not sources code of course but explanations a bit ?
Simple Queue hashing algorithm had an issue which caused hash rebuilds. This caused additional CPU load. This fix affects all Simple Queue configurations but improvement depends on queue count and complexity.

This issue was found on Intel based x86 installation with ~6500 Simple Queues. Load after upgrade went down from 70-80% to 20-30%.
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
uldis
MikroTik Support
MikroTik Support
Posts: 3424
Joined: Mon May 31, 2004 2:55 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Aug 29, 2016 10:59 am

vikibhai, please contact support@mikrotik.com about your TX/RX chain0/chain1 signal reading problem. The problem of the signal not reading started with v6.37rc22?

Also please note that chain0 RX should always be enabled as chain0 is considered the main chain.
 
vikibhai
just joined
Posts: 11
Joined: Mon Sep 08, 2014 7:44 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Aug 29, 2016 7:10 pm

vikibhai, please contact support@mikrotik.com about your TX/RX chain0/chain1 signal reading problem. The problem of the signal not reading started with v6.37rc22?

Also please note that chain0 RX should always be enabled as chain0 is considered the main chain.
I already mail to support mikrotik...and i dnt think so it startex with 6.37rc22..i have speed issue from 1st day...mostly people said wirless giving bad reception...so i test deeply it and discover that issue...u saw img that i post link http://imgur.com/a/bJptd...i click on tx rx chain 0 and tx on chain 1....but in registerd client sgnl status client not have chain 1 sgnal...i downgradge to v5.26 both chain working good...but problem is here oly one basebox2 working ..2nd basebox giving license issue ..on erery reboot software id chage randomly...so i upgrate it back to 6.37rc22...is there any solution i downgradge it to 5.26 without licence error
 
User avatar
emils
MikroTik Support
MikroTik Support
Posts: 481
Joined: Thu Dec 11, 2014 8:53 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Aug 31, 2016 10:15 am

Version 6.37rc24 has been released.

Changes since 6.37rc22:

*) dhcpv6 - update DUID when system-id changes (solves problem when cloned VM retains the same DUID);
*) ipsec - don't log authtype mismatch as critical;
*) ipsec - fixed kernel crash when sha512 was used;
*) ipsec - fixed xauth parameter printing in terminal;
*) lte - added support for more dlink dwm-222 configurations;
*) lte - added zte K5008-Z back;
*) lte - fixed default channels for dlink dwm-157;
*) pppoe - fixed master interface l2mtu check, could result in assumption that master interface can handle 14 byte bigger packet than it actually can (broken in 6.36);
*) snmp - skip forbidden oids on getnext completion;
*) supout - fixed bug that could cause enormous size supout.rif files;
*) usb - fixed usb port reset on ether1 link changes on mAP 2n;

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
Motorbreath
just joined
Posts: 13
Joined: Fri Aug 26, 2016 1:22 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Aug 31, 2016 10:27 am

The issue I had with lower signal on than on current version on Groove is fixed in rc24... well done 8)
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1814
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Aug 31, 2016 12:19 pm

*) snmp - skip forbidden oids on getnext completion

What problems does this fix ?

I ask as we have had some issues with SNMP polling of RouterBoards causing stability issues.
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
User avatar
emils
MikroTik Support
MikroTik Support
Posts: 481
Joined: Thu Dec 11, 2014 8:53 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Aug 31, 2016 12:50 pm

SNMP would crash when accessing these oids. This particular issue was introduced in 6.37rc10.
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1814
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Aug 31, 2016 2:00 pm

Thanks Emils,

Its not the SNMP + Routing issue we have.
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
Zorro
Long time Member
Long time Member
Posts: 676
Joined: Wed Apr 16, 2014 2:43 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Aug 31, 2016 2:23 pm

also if there wasn't "standart" radar-detection sources-code/algorythm, mandatory/enforced to use - there was some possibility to slightly tune-down radar-detection in ROS to considerably reduce amount of complains/whine about, because erratic behavior, making it kinda unusuable in several cases(with dense EMI/side-bands/harmonics, usual for ubran area)
 
User avatar
emils
MikroTik Support
MikroTik Support
Posts: 481
Joined: Thu Dec 11, 2014 8:53 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Aug 31, 2016 4:00 pm

Version 6.37rc26 has been released.

Changes since 6.37rc24:

!) ethernet - added new loop-protect feature for ethernet,vlan,eoip,eoipv6 interfaces (http://wiki.mikrotik.com/wiki/Manual:Loop_Protect);
*) fastpath - fixed kernel crash on interface disable/remove;
*) fetch - fixed bug with incomplete files in https mode;
*) routing - improved kernel performance in setups with large routing tables;
*) snmp - require write permitions for script run table access;
*) sstp - now supports TLS_ECDHE algorithms;

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
User avatar
BartoszP
Forum Guru
Forum Guru
Posts: 1704
Joined: Mon Jun 16, 2014 1:13 pm
Location: Poland

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Aug 31, 2016 4:16 pm

Does not work for RB411
[admin@RB411_102] > interface ethernet
[admin@RB411_102] /interface ethernet>

.. -- go up to interface
blink -- Generate traffic to blink leds
cable-test --
comment -- Set comment for items
disable -- Disable items
edit --
enable -- Enable items
export -- Print or save an export script that can be used to restore configuration
find -- Find items by value
get -- Gets value of item's property
monitor -- Monitor interface status
print -- Print values of item properties
reset-counters --
reset-mac-address --
set -- Change item properties
switch --


[admin@RB411_102] /interface ethernet>
Real admins use real keyboards.
 
patrick7
Member Candidate
Member Candidate
Posts: 298
Joined: Sat Jul 20, 2013 2:40 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Aug 31, 2016 4:17 pm

About loop protect: How is that handled if interface is in a bridge / switch group?
How is routing performance improved?
 
User avatar
bajodel
Long time Member
Long time Member
Posts: 545
Joined: Sun Nov 24, 2013 8:30 am
Location: Italy

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Sep 02, 2016 2:41 am

Seems like ipip tunnels not working if fastpath is enabled (if I disable fastpath locally on ipip interface or globally tunnels works)
 
alexjhart
Member Candidate
Member Candidate
Posts: 191
Joined: Thu Jan 20, 2011 8:03 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Sep 02, 2016 2:49 am

About loop protect: How is that handled if interface is in a bridge / switch group?
How is routing performance improved?
Yeah, I'm wondering if this can help with the CRS shortcoming (no STP for switch group ports). I haven't purchased CRS yet because of this.
-----
Alex Hart

The Brothers WISP
 
alexjhart
Member Candidate
Member Candidate
Posts: 191
Joined: Thu Jan 20, 2011 8:03 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Sep 02, 2016 2:55 am

*) snmp - added script table which executes script and returns it's output on get request;

Please explain how to use this feature, because I cannot find it in the user interface...
I too am looking for more information. Don't see anything in the wiki yet?
@emils maybe?
-----
Alex Hart

The Brothers WISP
 
irghost
Member Candidate
Member Candidate
Posts: 280
Joined: Sun Feb 21, 2016 1:49 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Sep 02, 2016 7:17 am

!) ethernet - added new loop-protect feature for ethernet,vlan,eoip,eoipv6 interfaces (http://wiki.mikrotik.com/wiki/Manual:Loop_Protect);
where?
I cant find it ! (/interface ethernet)
MTCNA MTCRE MTCTCE MTCUME MTCWE MTCIPv6E MTCINE
 
User avatar
emils
MikroTik Support
MikroTik Support
Posts: 481
Joined: Thu Dec 11, 2014 8:53 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Sep 02, 2016 9:37 am

This is just the initial release for this new feature. We are still polishing it, writing documentation and fixing some bugs. Until it is done, you will have to explore it by yourselves.

irghost, are you sure you have the latest release candidate version installed? On what RouterBOARD you can not find this function?
 
pe1chl
Forum Guru
Forum Guru
Posts: 5711
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Sep 02, 2016 10:52 am

This is just the initial release for this new feature. We are still polishing it, writing documentation and fixing some bugs. Until it is done, you will have to explore it by yourselves.
(I presume this is about the snmp script table)

Can you at least indicate where this feature can be found in the command structure?
I have been looking in /system script and in /snmp but I have been unable to find any command or option referring to a script table.
 
Zorro
Long time Member
Long time Member
Posts: 676
Joined: Wed Apr 16, 2014 2:43 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Sep 02, 2016 10:55 am

not sure in which of latest RC's, but port scans detection - working again. (most stealth scans ~ reliably detected now as before).
that good/essential, IMHO.
 
User avatar
emils
MikroTik Support
MikroTik Support
Posts: 481
Joined: Thu Dec 11, 2014 8:53 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Sep 02, 2016 2:44 pm

Version 6.37rc27 has been released.

Changes since 6.37rc26:

*) dude - (changes discussed here: http://forum.mikrotik.com/viewtopic.php?f=8&t=110424);
*) ethernet - allow to force mtu value when actual-mtu is already the same;
*) ethernet - rb44ge now have disabled-running-check=no by default;
*) ipsec - fixed dynamic policy not deleted on disconnect for nat-t peers;
*) kvm - fix add/remove of disabled interfaces;
*) lte - added rndis for ZTE MF8xx;
*) lte - adjusted usb config for dlink dwm-157 D;
*) mpls - fixed vpls throughput issues caused by out-of-order packets;
*) usermanager - fixed rare crash on paypal payment;

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1721
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Sep 02, 2016 2:45 pm

Can you at least indicate where this feature can be found in the command structure?
I have been looking in /system script and in /snmp but I have been unable to find any command or option referring to a script table.
under interfaces.
/interface ethernet set <tab><tab> 
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.
 
pe1chl
Forum Guru
Forum Guru
Posts: 5711
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Sep 02, 2016 3:00 pm

Can you at least indicate where this feature can be found in the command structure?
I have been looking in /system script and in /snmp but I have been unable to find any command or option referring to a script table.
under interfaces.
I am taliking about this:

*) snmp - added script table which executes script and returns it's output on get request;

Not this:

!) ethernet - added new loop-protect feature for ethernet,vlan,eoip,eoipv6 interfaces
 
paulct
Member Candidate
Member Candidate
Posts: 290
Joined: Fri Jul 12, 2013 5:38 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Sep 02, 2016 3:12 pm

*) routing - improved kernel performance in setups with large routing tables;

Interesting, where will the performance be felt? Loading of bgp peer routes? or?
 
rpingar
Long time Member
Long time Member
Posts: 539
Joined: Fri May 28, 2004 2:46 pm
Location: Italy

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Sep 05, 2016 10:27 am

to have it fixed (*) mpls - fixed vpls throughput issues caused by out-of-order packets;) do I have to upgrade only the termination tunnel or all the mpls chain????

regards
Ros
 
User avatar
emils
MikroTik Support
MikroTik Support
Posts: 481
Joined: Thu Dec 11, 2014 8:53 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Sep 05, 2016 10:43 am

rpingar, should be enough to upgrade only routers with VPLS endpoints.

pe1chl, you can download the latest Mikrotik.mib file and look for differences between the previous version. Mikrotik.mib.

paulct, any action with routing table should be faster now.
 
pe1chl
Forum Guru
Forum Guru
Posts: 5711
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Sep 05, 2016 12:35 pm

pe1chl, you can download the latest Mikrotik.mib file and look for differences between the previous version. Mikrotik.mib.
Thanks, I see the entries now.
I would have expected some command to add a OID and script name (or literal script) binding that OID to the script.
It now appears that all scripts in the existing script table fulfilling some criteria are callable via SNMP. Not sure if that is a good idea.
 
irghost
Member Candidate
Member Candidate
Posts: 280
Joined: Sun Feb 21, 2016 1:49 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Sep 05, 2016 12:57 pm

This is just the initial release for this new feature. We are still polishing it, writing documentation and fixing some bugs. Until it is done, you will have to explore it by yourselves.

irghost, are you sure you have the latest release candidate version installed? On what RouterBOARD you can not find this function?


yes last RC version ( RB2011)
MTCNA MTCRE MTCTCE MTCUME MTCWE MTCIPv6E MTCINE
 
User avatar
emils
MikroTik Support
MikroTik Support
Posts: 481
Joined: Thu Dec 11, 2014 8:53 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Sep 05, 2016 1:13 pm

irghost, Winbox support is not yet added, it is only available from terminal:
/interface ethernet set etherX loop-protect<tab>
 
User avatar
emils
MikroTik Support
MikroTik Support
Posts: 481
Joined: Thu Dec 11, 2014 8:53 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 06, 2016 3:31 pm

Version 6.37rc30 has been released.

Changes since 6.37rc27:

*) dns - fixed crash when using regexp static dns entries;
*) dude - (changes discussed here: http://forum.mikrotik.com/viewtopic.php?f=8&t=110424);
*) ethernet - fixed loop-protect on bridged ports;
*) ethernet - fixed neverending loop in CDP packet processing;
*) ipv6 - show multiple neighbors with the same address;
*) kvm - fixed guest crashing when using MTU bigger than 1504;
*) leds - added option to disable all leds on RBcAP2n;
*) lte - added switch for Huawei K5160;
*) lte - fixed band unsetting;
*) pppoe - fixed disconnects by idle timeout when fastpath is used;
*) rb3011 - fixed rare occasions when router would hang while loading kernel;
*) sfp - fixed initial eeprom reading on CCR1036-8G-2S+ and CCR1072-1G-8S+;
*) trafficgen - add per stream packet count setting;
*) tunnel - fixed link status flapping when remote end is not responding (introduced in 6.37rc);
*) tunnel - increased minimal MRRU to 1500 for PPP interfaces;
*) webfig - fixed certificate signing;
*) winbox - added auto refresh for BFD neighbors;
*) winbox - added comment field support for switch vlan menu;
*) winbox - adjusted allowed values for http-proxy field;
*) winbox - disabled MRRU by default for PPP interfaces;
*) winbox - removed L2MTU field for PPP interfaces;
*) winbox - removed unset button for L2MTU field;

All known wireless package issues after system upgrade should be fixed now.

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1721
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 06, 2016 3:36 pm

All known wireless package issues after system upgrade should be fixed now.
Just upgraded board from 6.35.4, with 4 wireless packages on it -fp and -cm2 (in bundle) -cm2 and -rep separately, enabled -rep.
Upgrade went without issues have one "wireless" in the bundle, enabled, with configuration intact. Good Job!
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.
 
MartijnVdS
Frequent Visitor
Frequent Visitor
Posts: 93
Joined: Wed Aug 13, 2014 9:36 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 06, 2016 4:25 pm

How does the new automatic DFS setting work in relation to CAPsMANv2?

As far as I know, DFS did not work when using CAPsMANv2. Has this changed? Do CAPs now run DFS checks if you use a frequency on which DFS is required?
 
Beone
Member Candidate
Member Candidate
Posts: 243
Joined: Fri Feb 11, 2011 1:11 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 06, 2016 8:07 pm

We've noticed that multicast forwarding isn't working anymore since v6.37rc27 previous RCs where working. Rollback to v6.34.6 works perfect
 
notToNew
Member Candidate
Member Candidate
Posts: 147
Joined: Fri Feb 19, 2016 3:15 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Sep 07, 2016 3:57 pm

Feature request for wireless-package:

As we have the mode "aligment only", I'd like to have a mode "Virtual only".
I often use the new combination of the wireless-rep package and configure one device as a station, and a virtual-device as a bridge-ap.
Now, wenn the station doesn't get a connection, it also disables the virtual bridge-ap-device.
As a workaround, I configure 2 virtual devices, the station AND the bridge. Now, what should I do with the master-device?
As solution I suggest 2 things:
1. Don't disable virtual devices if the master device (as station) doesn't get a connection.
2. Add the mode "Virtual only" for the master-device.
--------------------------------------------------------------------------------------------
CCR1036-12G-4S, several 952Ui-5ac2nD, ...
 
User avatar
emils
MikroTik Support
MikroTik Support
Posts: 481
Joined: Thu Dec 11, 2014 8:53 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Sep 07, 2016 5:08 pm

Version 6.37rc32 has been released.

Changes since 6.37rc30:

*) dude - (changes discussed here: viewtopic.php?f=8&t=110424);
*) ipv6 - improved system responsiveness when ipv6 routes are frequently modified;
*) lte - added switch for Huawei K5160;
*) ppp - use default-route-distance when adding ipv6 default route;
*) quickset - added 2GHz-g/n band support;
*) quickset - fixed guest reporting in "home ap dual" mode;
*) quickset - fixed wireless frequency fields in "home ap dual" mode;
*) trafficgen - show out-of-order packet counters in stats printouts;
*) tunnel - fixed ipv6 link-local address adding for gre;
*) users - fixed script policy checking against user policies when running scripts;
*) winbox - added default-authentication parameter for wireless station modes;
*) winbox - adjust on-event field dynamically depending on window size;
*) winbox - display actual-mtu for tunnels in interfaces window;
*) winbox - fixed multiline read only fields not displaying new line characters;
*) winbox - fixed raw firewall showing jump targets from filter chains;
*) winbox - removed health menu from devices that do not support it;
*) winbox - removed L2MTU field from PPP server binding settings;
*) winbox - show firmware-type in routerboard window;

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
 
pe1chl
Forum Guru
Forum Guru
Posts: 5711
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Sep 07, 2016 5:13 pm

Feature request for wireless-package:

As we have the mode "aligment only", I'd like to have a mode "Virtual only".
I agree with this! I use wireless-rep without a direct bridge as setup when using it as a repeater.
The station should connect to a WiFi AP, then I setup a VPN over that link, and the VPN network is offered on the bridge-ap configured using wireless-rep.
It is very inconvenient that the bridge-ap does not work when the station is not connected, e.g. you want to set the password on the station
by logging in to the MikroTik. That is now only possible using a cable.

(of course I understand the trouble beneath this: when the station is not connected it will be scanning the frequencies to find an AP,
and the bridge-ap is using the same hardware so the same frequency, which is not stable then. however, with dual-chain devices
or some clever timeouts this can probably be solved?)
 
notToNew
Member Candidate
Member Candidate
Posts: 147
Joined: Fri Feb 19, 2016 3:15 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Sep 07, 2016 6:32 pm

Another finding:
It is somehow unclear if you set the master-wifi-device to bridge and the virtual-device to bridge-ap,
the limitation of the master-device to allow only 1 connected device wins.
Changing the master-device to bridge-ap solved my problem.
So please add in the documentation (or fix that limitation)

I wondered for several hours why it is not possible to connect more than 1 wireless device at the same time while not getting any error-logs...
--------------------------------------------------------------------------------------------
CCR1036-12G-4S, several 952Ui-5ac2nD, ...
 
jarda
Forum Guru
Forum Guru
Posts: 7601
Joined: Mon Oct 22, 2012 4:46 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Sep 07, 2016 10:07 pm

Feature request for wireless-package:

As we have the mode "aligment only", I'd like to have a mode "Virtual only".
I agree with this! I use wireless-rep without a direct bridge as setup when using it as a repeater.
The station should connect to a WiFi AP, then I setup a VPN over that link, and the VPN network is offered on the bridge-ap configured using wireless-rep.
It is very inconvenient that the bridge-ap does not work when the station is not connected, e.g. you want to set the password on the station
by logging in to the MikroTik. That is now only possible using a cable.

(of course I understand the trouble beneath this: when the station is not connected it will be scanning the frequencies to find an AP,
and the bridge-ap is using the same hardware so the same frequency, which is not stable then. however, with dual-chain devices
or some clever timeouts this can probably be solved?)
I would like to have it too. Very useful.
 
tnakir
Frequent Visitor
Frequent Visitor
Posts: 54
Joined: Thu Aug 19, 2010 4:29 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Sep 09, 2016 1:02 pm

I am having a problem with wireless-rep package on RB2011UiAS-2HnD-IN when using 2.4 band (I tried all the channel widths) on my laptop.

When my Logitech Unifying receiver (mouse) is connected to my laptop's USB, my CCQ drops to 20%. When I unplug it, i get 90+%.

When I use older packages, I don't get interference. In both cases I am using auto frequency (I also tried to change channels manually and it didn't help).

Any ideas?
 
RyperX
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Thu May 21, 2015 11:14 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Sep 10, 2016 10:18 pm

Latest RC is working fine on rb2011
Last edited by RyperX on Sun Sep 11, 2016 10:25 am, edited 3 times in total.
 
jondavy
Member Candidate
Member Candidate
Posts: 125
Joined: Tue May 12, 2009 11:14 pm
Location: Brasil

Re: v6.37rc [release candidate] is released, only one wireless package!

Sun Sep 11, 2016 1:45 am

Romon neighbor bug:
when the identity is too long it appears as mikrotik into romon neighbor

and also the option to port forbid not working
 
hedele
Member
Member
Posts: 338
Joined: Tue Feb 24, 2009 11:23 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Sep 12, 2016 5:43 pm

Wow... greatly reduced CPU load over previous versions on devices with large routing tables! Also a CCR1016 does no longer produce packet loss in general packet forwarding when a single CPU core is stuck at 100%
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6615
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 13, 2016 1:33 pm

Version 6.37rc34 has been released,

Changes since 6.37rc32:

*) capsman - fixed kernel crash on cap while changing client-to-client forwarding;
*) dhcpv6 - improved interface status tracking;
*) dude - (changes discussed here: viewtopic.php?f=8&t=110424);
*) gps - always check NMEA checksum if available;
*) ipv6 - fixed RA and RS processing on new interfaces after many interfaces have lost link during prolonged operation;
*) mpls - fixed memory leak;
*) packages - fixed situation when it was impossible to disable ipv6 package (introduced in v6.37rc3x);
*) ppp,lte - pin is now converted to string argument;
*) supout - improved crash report generation for tile architecture;

If you experience version related issues, then please contact MikroTik support (support@mikrotik.com) and send supout file from your router. File must be generated while router is not working as suspected or after crash
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1814
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 13, 2016 2:09 pm

*) mpls - fixed memory leak;
Hi Sergejs + Team,

Can you please provide more detail on this fix. Specifically what the triggers for the memory leak were, this way we can know exactly what problems it will solve.

Thanks!
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1721
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 13, 2016 4:02 pm

Hi Sergejs + Team,
Can you please provide more detail on this fix. Specifically what the triggers for the memory leak were, this way we can know exactly what problems it will solve.
Thanks!
Lately changelog is as precise as they are willing/allowed to answer. for example - you wouldn't like them to reveal information that can potentially be used to trigger this on purpose. Especially while the fix is only in RC versions. Questions like this are dangerous.
Question here is simple, have you noticed or not some memory leaks in your mpls setups? If yes - upgrade.
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6615
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 13, 2016 4:16 pm

nz_monkey,
We had ticket with MPLS configuration, that produced memory leak. This is fixed, however it is actual for very specific configurations. And I do not have to add more that previous poster replied.
 
amokkatmt
newbie
Posts: 30
Joined: Mon Oct 24, 2011 3:31 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 13, 2016 5:38 pm

I can't disable wireless package on RB750GL since some of rc's.
17:24:09 system,info package wireless@ is scheduled for disable by ***
17:24:18 system,info disabled wireless@-6.37rc34 
17:24:21 system,info router rebooted 
And after this reboot:
/system package print terse where disabled=no name=wireless
 0   name=wireless version=6.37rc34 build-time=sep/12/2016 13:06:07 scheduled="" bundle=routeros-mipsbe
 
jarda
Forum Guru
Forum Guru
Posts: 7601
Joined: Mon Oct 22, 2012 4:46 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 13, 2016 5:47 pm

Using package bundle by default is very bad approach of mikrotik for years. Better to install separate packages instead of bundle. Never mind it should be possible to disable bundled packages too.
 
Tonda
Member Candidate
Member Candidate
Posts: 162
Joined: Thu Jun 30, 2005 12:59 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 13, 2016 6:11 pm

I have the same problem with disabling wireless package at RB750UP. To be honest - I do not understand, why it is even possible to install or enable/disable wireless package on device, which never had and will never have any kind of WiFi device inside? I think more examples can be found among Routerboard devices.
 
jarda
Forum Guru
Forum Guru
Posts: 7601
Joined: Mon Oct 22, 2012 4:46 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 13, 2016 10:13 pm

because you can use such device as capsman - so you need the wireless package.
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1814
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Sep 14, 2016 8:10 am

nz_monkey,
We had ticket with MPLS configuration, that produced memory leak. This is fixed, however it is actual for very specific configurations. And I do not have to add more that previous poster replied.
Thanks Sergejs, macgaiver perfectly explained with a context I had not thought about.
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
JHV
just joined
Posts: 11
Joined: Mon Feb 01, 2016 8:27 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Sep 14, 2016 9:53 pm

Version 6.37rc34 has been released,

Changes since 6.37rc32:

*) dhcpv6 - improved interface status tracking;
DHCPv6 still does not work like before v 6.33.6.

If a disconnect occurs, DHCPv6 stays for 10 minutes in state renewing and for another 10 minutes in state rebinding. It takes exactly 20 minutes until a new prefix could be obtained.
Please see also this thread.
 
juhos
just joined
Posts: 3
Joined: Thu May 28, 2015 3:21 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Sep 17, 2016 3:03 pm

Hi guys!
*) modem - added d-link dwm-222 support;
Can anyone help me with this? I have one dwm-222 modem but it not seems like work. The router only see the "Mobile connect"(cd drive for progs on pc).
Im trying on HAP lite.
 
wispwest
Member
Member
Posts: 477
Joined: Tue May 19, 2009 3:48 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Sun Sep 18, 2016 10:28 pm

We had a few catostrophic wireless failures recently due to upgrading firmwares When it would come back, WLAN is disabled and lost all of its configuration as if ts a brand-new WLAN interface. Some of them didn't even show it, and needed the new wireless package enabled. Granted it wasn't clear enough what to do "prior" to the upgrade to the tech that was upgrading them.

It is understood now, but does still post some risks, would definitely be nice if the upgrade was full-automatic, which I understand is now happening the newest firmware? Aside from if you have multiple packages enabled, just make sure you disable one of them?
 
mistry7
Forum Guru
Forum Guru
Posts: 1281
Joined: Tue Oct 13, 2009 11:57 am
Location: Germany

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Sep 19, 2016 10:06 am

How to solve this?
How to remove the old used Wireless Pack?

Image
 
notToNew
Member Candidate
Member Candidate
Posts: 147
Joined: Fri Feb 19, 2016 3:15 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Sep 19, 2016 11:54 am

Is it possible to use the wireless-connect-list to connect to HIDDEN ssid's? Am I blind, or is there no possibility?
--------------------------------------------------------------------------------------------
CCR1036-12G-4S, several 952Ui-5ac2nD, ...
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Sep 19, 2016 1:28 pm

Version 6.37rc38 has been released,

Changes since 6.37rc36:

!) ethernet - added new loop-protect feature for ethernet,vlan,eoip,eoipv6 interfaces, http://wiki.mikrotik.com/wiki/Manual:Loop_Protect ;
*) dude - (changes discussed here: viewtopic.php?f=8&t=110424);
*) ipsec - fixed dynamic policy not deleted on disconnect for nat-t peers;

If you experience version related issues, then please contact MikroTik support (support@mikrotik.com) and send supout file from your router. File must be generated while router is not working as suspected or after crash
 
w0lt
Member
Member
Posts: 481
Joined: Wed Apr 02, 2008 2:12 pm
Location: Minnesota USA

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Sep 19, 2016 4:22 pm

Package list (Check For Updates) doesn't seem to grab the latest RC version.
MTCNA - 2011

" The Bitterness of Poor Quality Remains Long After the Sweetness of Low Price is Forgotten "
 
barracuda
just joined
Posts: 20
Joined: Thu Jul 09, 2015 12:41 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Sep 19, 2016 11:59 pm

Same here!
 
qiet72
just joined
Posts: 24
Joined: Thu Oct 09, 2014 10:23 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 12:31 am

Hi,

Currently running 6.37rc38 on a hAP ac. I noticed that my laptop with an Intel 7250 wireless card cannot seem to receive mimo (dual chain) at the higher rates of 802.11ac but works perfectly when connected to my Asus RT-AC68U router. The issue seems to only happen on receive (to laptop), not transmit (from laptop). Transmit works as expected with dual chain mimo. I have used the registration page in winbox and the "iw wlan0 station dump" linux command to get the info.

Have tried 6.34.6, 6.36.3 and this latest rc - all exibit the same issue. The Asus RT-AC68U router seems to use the Broadcom BCM4360 chipset.

Qiet72
 
User avatar
BartoszP
Forum Guru
Forum Guru
Posts: 1704
Joined: Mon Jun 16, 2014 1:13 pm
Location: Poland

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 9:13 am

6.37rc36 @ RB433 does not see rc38 for download.
Real admins use real keyboards.
 
qiet72
just joined
Posts: 24
Joined: Thu Oct 09, 2014 10:23 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 9:45 am

6.37rc36 @ RB433 does not see rc38 for download.
I stand corrected. Thank you. I will re-check the version and try again with latest.


Sent from my iPhone using Tapatalk
 
kristaps
Member Candidate
Member Candidate
Posts: 272
Joined: Mon Jan 27, 2014 1:37 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 10:44 am

How to solve this?
How to remove the old used Wireless Pack?

Image

Please use the Netinstall utility to reinstall the device:
http://wiki.mikrotik.com/wiki/Manual:Netinstall
 
andywright
just joined
Posts: 7
Joined: Tue May 10, 2016 5:20 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 12:00 pm

6.37rc38 on hAP AC

Trying to use QuickSet from Winbox in Home AP Dual mode - unable to save config as 'Band' always stays red whatever settings for 2GHz and 5GHz are chosen. Works ok from Web config page though.
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1721
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 2:59 pm

6.37rc38 on hAP AC

Trying to use QuickSet from Winbox in Home AP Dual mode - unable to save config as 'Band' always stays red whatever settings for 2GHz and 5GHz are chosen. Works ok from Web config page though.
what winbox loader version are you using?
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.
 
andywright
just joined
Posts: 7
Joined: Tue May 10, 2016 5:20 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 3:03 pm

Winbox 3.5
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 3:34 pm

Version 6.37rc40 has been released,

Changes since 6.37rc38:

*) dhcpv6 - reworked DHCP-PD server interface and route management;
*) tunnel - fixed communication via tunnel to router itself if fastpath was active;
*) wireless - fixed interface disappearance on upgrade to 6.37 (introduced in v6.37rc);

If you experience version related issues, then please contact MikroTik support (support@mikrotik.com) and send supout file from your router. File must be generated while router is not working as suspected or after crash
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 3:35 pm

andywright - This is an Winbox issue and will be fixed in next Winbox release.
 
andywright
just joined
Posts: 7
Joined: Tue May 10, 2016 5:20 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 3:39 pm

strods - many thanks :D
 
John39
just joined
Posts: 21
Joined: Mon Aug 08, 2016 11:17 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 4:42 pm

After upgrading to 6.37 RC 40 on the router where the wireless interface disappeared , he returned , although in support of said preparing to replace the router as the problem in the router .
 
rajo
newbie
Posts: 36
Joined: Tue Aug 16, 2011 11:12 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 5:16 pm

Is there any reason why NTP client still does not support DNS? It would be great if I could finally get rid of my script for this.
 
uldis
MikroTik Support
MikroTik Support
Posts: 3424
Joined: Mon May 31, 2004 2:55 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 5:24 pm

Is there any reason why NTP client still does not support DNS? It would be great if I could finally get rid of my script for this.
It is supported for a while already or you are looking some other setting:
/system ntp client set server-dns-names=NTP_SERVER_NAME
 
rajo
newbie
Posts: 36
Joined: Tue Aug 16, 2011 11:12 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 5:51 pm

It is supported for a while already or you are looking some other setting:
/system ntp client set server-dns-names=NTP_SERVER_NAME
I don't have server-dns-names as a configuration parameter. These are the options I have on MikroTik hardware:
[admin@MikroTik] > system ntp client set
enabled  mode  primary-ntp  secondary-ntp
Both primary-ntp and secondary-ntp require an IP address.
 
npero
Member
Member
Posts: 316
Joined: Tue Mar 01, 2005 1:59 pm
Location: Serbia

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 6:52 pm

Both primary-ntp and secondary-ntp require an IP address.
Do you maybe using ntp package ?

With ntp package
system ntp client set
enabled mode primary-ntp secondary-ntp
without
system ntp client set
enabled primary-ntp secondary-ntp server-dns-names
if you don't need ntp server don't have any reason to use ntp package.
 
rajo
newbie
Posts: 36
Joined: Tue Aug 16, 2011 11:12 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 7:17 pm

if you don't need ntp server don't have any reason to use ntp package.
Thanks! That was the issue.

@MikroTik, please fix the inconsistency. It doesn't make sense to me that the server-dns-names option should not be available with the NTP package installed.
 
pe1chl
Forum Guru
Forum Guru
Posts: 5711
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 7:37 pm

It doesn't make sense to me that the server-dns-names option should not be available with the NTP package installed.
It does make sense. The NTP package provides an NTP server and it works with fixed server addresses. Sure it would be
nice if there was the possibility to use DNS names there, but you should understand that in that case the DNS names would
be resolved only one time after router reboot. And there may even be dependency problems in that the router wants to set
the clock correctly before it has started the DNS resolver.

When running the router without NTP package, an SNTP implementation is used that can (when server-dns-names is used)
do an NTP lookup every time it requests the time, and the DNS name can return a different IP address every time. When that
is what you want (e.g. because you want to use the NTP pool), please use the SNTP implementation. Unfortunately, in that
case you cannot serve the time from the router.

I don't know which NTP server sourcecode MikroTik uses for the NTP server, and when it is the ntpd reference implementation,
if they will update to the latest version in RouterOS version 7. When they do, it would be possible to add a "pool-dns-name"
option to have both DNS resolution and server functionality.
 
rajo
newbie
Posts: 36
Joined: Tue Aug 16, 2011 11:12 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 8:16 pm

It does make sense. The NTP package provides an NTP server and it works with fixed server addresses. Sure it would be
nice if there was the possibility to use DNS names there, but you should understand that in that case the DNS names would
be resolved only one time after router reboot. And there may even be dependency problems in that the router wants to set
the clock correctly before it has started the DNS resolver.
I really don't buy this argument. What you describe is really an implementation rather than technical (or even best-practices) issue.
 
rzirzi
Member
Member
Posts: 377
Joined: Mon Oct 09, 2006 2:33 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 8:18 pm

Package list (Check For Updates) doesn't seem to grab the latest RC version.
Still the same problems... now the same with RC40...
 
pe1chl
Forum Guru
Forum Guru
Posts: 5711
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 9:57 pm

I really don't buy this argument. What you describe is really an implementation rather than technical (or even best-practices) issue.
It is the same in all NTP server implementations. NTP servers lock onto reference servers, and would not work OK when the actual
server changes for subsequent polls. So NTP server implementations lookup the DNS name only when started. SNTP is different.
 
qiet72
just joined
Posts: 24
Joined: Thu Oct 09, 2014 10:23 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Tue Sep 20, 2016 10:55 pm

6.37rc36 @ RB433 does not see rc38 for download.
OK, I have now updated to the latest rc (6.37rc40) by downloading from mikrotik.com/download and updating routeros manually.
I did the same test: Do a download via the 5Ghz 802.11ac. My hardware is an Intel 7260 a/b/g/n/ac adapter. When I download via my Asus RT-AC68U router which uses a Broadcom BCM4360 chipset, I get full mimo transfers at up to 866 Mb/s (actual transfer speed is about 320Mb/s). Unfortunately, when the Intel card is connected to the 5 Ghz hAP ac MikroTik router, then I only get a bitrate of 433Mb/s max (1 chain) on receiving or around 210Mb/s and 866 Mb/s (2 chains) on transmitting. Again, this issue happens also on 6.36.3 and 6.34.6 versions. Interestingly, the bug only happens when the receive signal is negotiate above 195 Mb/s.

Qiet72
 
Sob
Forum Guru
Forum Guru
Posts: 4542
Joined: Mon Apr 20, 2009 9:11 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Sep 21, 2016 1:14 am

NTP servers lock onto reference servers, and would not work OK when the actual
server changes for subsequent polls. So NTP server implementations lookup the DNS name only when started.
Let it work the same way as other ntp servers do, that's fine. No one asks for hostname being resolved again and again for each poll.

Current problem is that you have to put in numeric address instead of proper hostname, and if server moves somewhere else, RouterOS is stuck with old address. So you have to update config of all RouterOS clients, instead of updating only server's hostname. It's not right, since dns was invented to solve exactly this kind of problems.
People who quote full posts should be spanked with ethernet cable. Some exceptions for multi-topic threads may apply.
 
pe1chl
Forum Guru
Forum Guru
Posts: 5711
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Sep 21, 2016 11:44 am

I understand what you mean, but note that MikroTik routers do not usually have a hardware real time clock, so they need
to get their system time from an external source as soon as possible during startup. It might be that the NTP server is
started before the DNS resolver, I don't know details about that.

The problem is worsened by the fact that MikroTik allow only 2 NTP servers to be configured. This should IMHO be
extended to at least 4, better an "arbitrary" number as seen in other places (where you can just expand the value list).
Maybe the issue could be solved by adding the capability for at least 2 DNS names in addition to the existing 2 fixed
addresses, and the NTP server could delay the resolving of DNS names until it has DNS available.

Having some method of updating certain settings of a large number of MikroTik routers is a topic I am going to investigate
anyway, as I get more and more routers and require this as well. Probably some solutions exist using either the API
or an automated login to the ssh/telnet service.
 
RyperX
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Thu May 21, 2015 11:14 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Sep 21, 2016 1:44 pm

I updated to latest rc40 and i lost my complete interface configuration. (As i know i came from rc38)
All interfaces was resettet and every setting that had an interface applied was set to unknown.

Any idea what happen? Device rb2011
 
qiet72
just joined
Posts: 24
Joined: Thu Oct 09, 2014 10:23 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Sep 21, 2016 1:50 pm

6.37rc36 @ RB433 does not see rc38 for download.
OK, I have now updated to the latest rc (6.37rc40) by downloading from mikrotik.com/download and updating routeros manually.
I did the same test: Do a download via the 5Ghz 802.11ac. My hardware is an Intel 7260 a/b/g/n/ac adapter. When I download via my Asus RT-AC68U router which uses a Broadcom BCM4360 chipset, I get full mimo transfers at up to 866 Mb/s (actual transfer speed is about 320Mb/s). Unfortunately, when the Intel card is connected to the 5 Ghz hAP ac MikroTik router, then I only get a bitrate of 433Mb/s max (1 chain) on receiving or around 210Mb/s and 866 Mb/s (2 chains) on transmitting. Again, this issue happens also on 6.36.3 and 6.34.6 versions. Interestingly, the bug only happens when the receive signal is negotiate above 195 Mb/s.

Qiet72
I am considering adding screenshots to give a better idea of what I mean in case someone does not understand the problem. Unfortunately, I haven't figured out how to upload screenshots. If I try to insert an image, then it looks like it expects the image to exist already on the internet, but I would like upload the image from my computer - how do I do that on this forum?

Qiet72
 
qiet72
just joined
Posts: 24
Joined: Thu Oct 09, 2014 10:23 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Sep 21, 2016 2:12 pm

Is it possible to use the wireless-connect-list to connect to HIDDEN ssid's? Am I blind, or is there no possibility?
I seem to remember that you have to use the mac address of the ap you want to connect to instead of the ssid when you want to connect to a hidden access point.

Qiet72
 
notToNew
Member Candidate
Member Candidate
Posts: 147
Joined: Fri Feb 19, 2016 3:15 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Sep 21, 2016 6:05 pm

I seem to remember that you have to use the mac address of the ap you want to connect to instead of the ssid when you want to connect to a hidden access point.

Qiet72
Thanks for your answer, I tried it without success. My Ap has several hidden wifi with the same mac, so how can the microtik connection-list determine which
wifi to choose, when it has no information about the ssid? Maybe that's the reason why it didn't work in my test?
--------------------------------------------------------------------------------------------
CCR1036-12G-4S, several 952Ui-5ac2nD, ...
 
pe1chl
Forum Guru
Forum Guru
Posts: 5711
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Sep 21, 2016 7:14 pm

My Ap has several hidden wifi with the same mac
Ohh boy... that is not good! Did the AP allow you to configure it that way? Did you have to force it somehow?
 
Sob
Forum Guru
Forum Guru
Posts: 4542
Joined: Mon Apr 20, 2009 9:11 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Sep 21, 2016 7:53 pm

Maybe the issue could be solved by adding the capability for at least 2 DNS names in addition to the existing 2 fixed
addresses, and the NTP server could delay the resolving of DNS names until it has DNS available.
You may be overthinking it. DNS resolver in RouterOS is simple service, it must start up in no time. Making it a dependency for NTP client should not be a problem. And even if not, and NTP client was not able to resolve hostname, it would succeed a second later. No big deal to most users.

You can come up with some setup where hostnames wouldn't work. E.g. if your upstream DNS resolver would be only accessible using IPSec tunnel, which would have trouble starting with wrong system time. But it would be a special case and user/admin's responsibility to use the right configuration (i.e. in this case NTP client with numeric addresses only).
People who quote full posts should be spanked with ethernet cable. Some exceptions for multi-topic threads may apply.
 
Mikhail73
just joined
Posts: 10
Joined: Wed Sep 21, 2016 8:31 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Sep 21, 2016 8:43 pm

Does anyone have problems with recursive routing? I used this manual (Multiple host checking per Uplink), and everything works fine on first router. But exactly the same configuration (except gateways, of course) doesn't work on another two routers. When i add default route via virtual host 10.1.1.1, this route becomes active for several seconds, then becomes inactive. When i checked 10.1.1.1 (terminal-ip route check 10.1.1.1) - everything is ok. It seems to me, it's a bug. Tested on 6.36.2/6.36.3/6.47rc40.
Last edited by Mikhail73 on Thu Sep 22, 2016 5:07 am, edited 1 time in total.
 
qiet72
just joined
Posts: 24
Joined: Thu Oct 09, 2014 10:23 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Wed Sep 21, 2016 8:59 pm

I seem to remember that you have to use the mac address of the ap you want to connect to instead of the ssid when you want to connect to a hidden access point.

Qiet72
Thanks for your answer, I tried it without success. My Ap has several hidden wifi with the same mac, so how can the microtik connection-list determine which
wifi to choose, when it has no information about the ssid? Maybe that's the reason why it didn't work in my test?
You say: "My Ap has several hidden wifi with the same mac" - do you mean you have multiple Virtual AP's with the same mac address beside the one physical AP?

Qiet72
 
notToNew
Member Candidate
Member Candidate
Posts: 147
Joined: Fri Feb 19, 2016 3:15 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Sep 22, 2016 9:56 am

You say: "My Ap has several hidden wifi with the same mac" - do you mean you have multiple Virtual AP's with the same mac address beside the one physical AP?
Qiet72
No, I have ONE AP(not mikrotik) with several hidden SSIDs. each of this ssids have a name, like private-net and guestnet.
Every hidden ssid has the same mac-adresss.
So when i want to connect to the "private-net", how can i be shure that i'm connected to this net when i use ssid=MAC instead of ssid=private-net?
--------------------------------------------------------------------------------------------
CCR1036-12G-4S, several 952Ui-5ac2nD, ...
 
MartijnVdS
Frequent Visitor
Frequent Visitor
Posts: 93
Joined: Wed Aug 13, 2014 9:36 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Sep 22, 2016 10:08 am

You say: "My Ap has several hidden wifi with the same mac" - do you mean you have multiple Virtual AP's with the same mac address beside the one physical AP?
Qiet72
No, I have ONE AP(not mikrotik) with several hidden SSIDs. each of this ssids have a name, like private-net and guestnet.
Every hidden ssid has the same mac-adresss.
So when i want to connect to the "private-net", how can i be shure that i'm connected to this net when i use ssid=MAC instead of ssid=private-net?
Every virtual AP should, by default, get its own unique mac address. Otherwise, clients will get confused even when the network is visible.
 
pe1chl
Forum Guru
Forum Guru
Posts: 5711
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Sep 22, 2016 10:36 am

No, I have ONE AP(not mikrotik) with several hidden SSIDs. each of this ssids have a name, like private-net and guestnet.
Every hidden ssid has the same mac-adresss.
Please verify that again. I don't think it is true, and if it is true I don't think it can work.
 
uldis
MikroTik Support
MikroTik Support
Posts: 3424
Joined: Mon May 31, 2004 2:55 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Sep 22, 2016 11:10 am

if you don't need ntp server don't have any reason to use ntp package.
Thanks! That was the issue.

@MikroTik, please fix the inconsistency. It doesn't make sense to me that the server-dns-names option should not be available with the NTP package installed.
This will be fixed/added in the RouterOS v7 only as current implementation doesn't allow that to add in v6 for the NTP package.
 
User avatar
paoloaga
Member Candidate
Member Candidate
Posts: 222
Joined: Tue Mar 08, 2011 2:52 am
Location: Vaprio d'Agogna (NO) - Italy
Contact:

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Sep 22, 2016 1:13 pm

This will be fixed/added in the RouterOS v7 only as current implementation doesn't allow that to add in v6 for the NTP package.
There are so many things that will be available in v7 only, the most important (for me) are IPv6 routing enhancements (like the recursive lookup of BGP routes), I hope that we will be able to see it soon enough!
 
patrick7
Member Candidate
Member Candidate
Posts: 298
Joined: Sat Jul 20, 2013 2:40 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Sep 22, 2016 1:49 pm

If it ever will be available...
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1406
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Sep 22, 2016 3:15 pm

Version 6.37rc42 has been released,

Changes since 6.37rc40:

!) dude - (changes discussed here: viewtopic.php?f=8&t=110424);
*) certificate - do not allow to remove certificate template while signing certificate;
*) dhcpv6 - fixed interface status update on client add (introduced in v6.37rc);
*) firewall - fixed time based rules on time/timezone changes (again);
*) ipsec - fixed crash with enabled fragmentation;
*) ipsec - fixed fragmentation use negotiation;
*) lte - added hauwei me909s variant;
*) lte - fixed setting correct lte band for sxt lte;
*) traffic-flow - fixed IPFIX packet timestamp;
*) traffic-flow - fixed IPFIX wrong flow sequence;

If you experience version related issues, then please contact MikroTik support (support@mikrotik.com) and send supout file from your router. File must be generated while router is not working as suspected or after crash
 
notToNew
Member Candidate
Member Candidate
Posts: 147
Joined: Fri Feb 19, 2016 3:15 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Sep 22, 2016 4:26 pm

2 year old sony-tv does not work with wireless-rep package. wireless-cm2 works as expected.
--------------------------------------------------------------------------------------------
CCR1036-12G-4S, several 952Ui-5ac2nD, ...
 
User avatar
BartoszP
Forum Guru
Forum Guru
Posts: 1704
Joined: Mon Jun 16, 2014 1:13 pm
Location: Poland

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Sep 22, 2016 9:45 pm

RB741TC @ RC36 or RC40
Cannot set it as CAP as "Certicate" field is in error state and there is no way to resolve this problem from GUI.
This RB741 have been removed from CAPSMAN some RC's back and I want to connect it again to CAPSMAN.
RB741TCRC40.PNG
You do not have the required permissions to view the files attached to this post.
Real admins use real keyboards.
 
FezzFest
newbie
Posts: 31
Joined: Wed Jun 03, 2015 12:03 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Thu Sep 22, 2016 11:42 pm

Upgraded OmniTIK U-5HnD from 6.34.6 (bugfix) to 6.37rc40 and I'm stuck without wireless. It is in the package list two times, once with version 6.37rc40, once with version 6.27 (I have no idea where this comes from), both disabled. Uninstalling wireless package does not work, neither does enabling any of the packages.

Edit: downgraded to 6.36.3 and upgraded to 6.37rc42 again, issue persists. Device is in a remote location, so netinstall is not a possibility.
 
mistry7
Forum Guru
Forum Guru
Posts: 1281
Joined: Tue Oct 13, 2009 11:57 am
Location: Germany

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Sep 23, 2016 6:43 am

@fezzfest

Known Unfixed issue......
Downgrade to 6.35.4
This bring you back with Wireless, After This you can Upgrade to 6.36 and the old Wireless-FP will be removed!

Mistry7
 
Mikhail73
just joined
Posts: 10
Joined: Wed Sep 21, 2016 8:31 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Fri Sep 23, 2016 6:47 pm

Does anyone have problems with recursive routing? I used this manual (Multiple host checking per Uplink), and everything works fine on first router. But exactly the same configuration (except gateways, of course) doesn't work on another two routers. When i add default route via virtual host 10.1.1.1, this route becomes active for several seconds, then becomes inactive. When i checked 10.1.1.1 (terminal-ip route check 10.1.1.1) - everything is ok. It seems to me, it's a bug. Tested on 6.36.2/6.36.3/6.36rc40/6.37
Excuse my persistence, but can anyone answer me, why double recursive route is inactive while it's gateway is active?..
 
samsung172
Forum Guru
Forum Guru
Posts: 1186
Joined: Sat Apr 04, 2009 3:45 am
Location: Østfold - Norway
Contact:

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Sep 24, 2016 1:23 am

 with "radar-detect" enabled will end in endless frequency search loop, even when there is realy no radar
That is not true. All countries in the EU, and the USA should have already been using this setting for a long time, and there are no problems like you describe. 
I hope taht there will be country "other"
RouterOS already has a superchannel mode that does exactly this. 

this is not true.

If you have to much power, noise and gain - you WILL have DFS to detect radar at all freq. DFS is NOT working as expected in ros. You should also implement TPC.
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8305
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Sep 24, 2016 3:35 am

Does anyone have problems with recursive routing? I used this manual (Multiple host checking per Uplink), and everything works fine on first router. But exactly the same configuration (except gateways, of course) doesn't work on another two routers. When i add default route via virtual host 10.1.1.1, this route becomes active for several seconds, then becomes inactive. When i checked 10.1.1.1 (terminal-ip route check 10.1.1.1) - everything is ok. It seems to me, it's a bug. Tested on 6.36.2/6.36.3/6.36rc40/6.37
Excuse my persistence, but can anyone answer me, why double recursive route is inactive while it's gateway is active?..
please make a new topic and post some details of actual config and state ("/ip route print detail", etc). as you can see, your question is not about 6.37rc exactly
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
vlatko
newbie
Posts: 48
Joined: Sat Feb 12, 2005 11:28 am

Re: v6.37rc [release candidate] is released, only one wireless package!

Sat Sep 24, 2016 12:47 pm

I'm not sure where mikrotik going, concerning wireless and radio side
I am aware of the limitations imposed by regulatory agencies in terms of DFS and other
now is the fact that with the current DFS mode, wireless becomes completely unusable in dense areas
DFS just constantly shifting frequency even if there is no radar in the vicinity and that's a fact
ITS TOTALY UNUSABLE
as far as I can see, there are two possible solutions
or they will be left some backdoor possibillity to go without DFS
or they will have to do something drastic to change
I think we need the following
spectrum scan should be carried out continuously in the background, independently of the work of operating clients radio
selection of free channels should be carried in background also, without disrupting client connections
probably would have to be a separate radio for it, like at ubiquiti
also, on mandatory, should be introduced synchronous switching customers to new frequency from ap radio side
after DFS establishing new free frequencies, ap should task a control signal for simultaneously switching to a new frequency to all clients from reg table
This could probably be introduced on proprietary protocols
without this i dont see how to use DFS
 
notToNew
Member Candidate
Member Candidate
Posts: 147
Joined: Fri Feb 19, 2016 3:15 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Sep 26, 2016 10:48 am

2 year old sony-tv does not work with wireless-rep package. wireless-cm2 works as expected.
thanks BartoszP for answering, i know that 6.37 only has one wireless-package.
Anyway, the problem still exists:

Connecting with 3.36.3 and wireless-cm2 works,
3.36.3 wireless-rep and 3.37.42 wireless does not work.

Another device which does not work: "Samsung UE22H5670"
--------------------------------------------------------------------------------------------
CCR1036-12G-4S, several 952Ui-5ac2nD, ...
 
pe1chl
Forum Guru
Forum Guru
Posts: 5711
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Sep 26, 2016 11:49 am

It could depend on some settings, e.g. aes/tkip for group ciphers.
 
notToNew
Member Candidate
Member Candidate
Posts: 147
Joined: Fri Feb 19, 2016 3:15 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Sep 26, 2016 12:07 pm

It could depend on some settings, e.g. aes/tkip for group ciphers.
Thanks for answering.
I posted a more in-dept message in the new 6.37 thread and think we should continoue there...?

My settings are the same on every MT-AP-device: WPA2-PSK and aes-ccm, no tkip.
I have different OS'ses on the client side (linux, windows, BSD, ...)

The MT support already contacted me some weeks ago, without any prograss until today. I offered them so donate
such a device for testing, but they bought one on theire own.

As wireless-cm2 is discontinued in the current branch, I'm somehow worried about the future...

My settings are the same on every device: WPA2-PSK and aes-ccm, no tkip.

The MT support already contacted me some weeks ago, without any prograss until today. I offered them so donate
such a device for testing, but they bought one on theire own.

As wireless-cm2 is discontinued in the current branch, I'm somehow worried about the future...
--------------------------------------------------------------------------------------------
CCR1036-12G-4S, several 952Ui-5ac2nD, ...
 
pe1chl
Forum Guru
Forum Guru
Posts: 5711
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Sep 26, 2016 12:09 pm

It could depend on some settings, e.g. aes/tkip for group ciphers.
Thanks for answering.
I posted a more in-dept message in the new 6.37 thread and think we should continoue there...?

My settings are the same on every MT-AP-device: WPA2-PSK and aes-ccm, no tkip.
Try to enable tkip for group cipher.
 
notToNew
Member Candidate
Member Candidate
Posts: 147
Joined: Fri Feb 19, 2016 3:15 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Sep 26, 2016 2:33 pm

Try to enable tkip for group cipher.
No difference. Here is the Debuglog from 3.26.3 with enables TKIP
02:02:31 wireless,debug wlan1: 00:12:F0:6E:DD:XX attempts to associate 
02:02:31 wireless,debug wlan1: reject 00:12:F0:6E:DD:XX, banned (last failure - extensive data loss) 
02:02:34 wireless,debug wlan1: 00:12:F0:6E:DD:XX attempts to associate 
02:02:34 wireless,debug wlan1: reject 00:12:F0:6E:DD:XX, banned (last failure - extensive data loss) 
02:02:37 wireless,debug wlan1: 00:12:F0:6E:DD:XX attempts to associate 
02:02:37 wireless,debug wlan1: reject 00:12:F0:6E:DD:XX, banned (last failure - extensive data loss) 
02:02:40 wireless,debug wlan1: 00:12:F0:6E:DD:XX attempts to associate 
02:02:40 wireless,debug wlan1: 00:12:F0:6E:DD:XX not in local ACL, by default accept 
02:02:40 wireless,info 00:12:F0:6E:DD:XX@wlan1: connected 
02:02:43 wireless,debug wlan1: 00:12:F0:6E:DD:XX attempts to associate 
02:02:43 wireless,info 00:12:F0:6E:DD:XX@wlan1: reassociating 
02:02:43 wireless,info 00:12:F0:6E:DD:XX@wlan1: disconnected, ok 
02:02:43 wireless,debug wlan1: 00:12:F0:6E:DD:XX not in local ACL, by default accept 
02:02:43 wireless,info 00:12:F0:6E:DD:XX@wlan1: connected 
02:02:46 wireless,debug wlan1: 00:12:F0:6E:DD:XX attempts to associate 
02:02:46 wireless,info 00:12:F0:6E:DD:XX@wlan1: reassociating
Log wir 6.36.3 wireless-cm2
02:07:15 wireless,debug wlan1: 00:12:F0:6E:DD:XX attempts to associate 
02:07:15 wireless,debug wlan1: 00:12:F0:6E:DD:XX not in local ACL, by default accept 
02:07:15 wireless,info 00:12:F0:6E:DD:XX@wlan1: connected
Edit: Added log for wireless-cm2
--------------------------------------------------------------------------------------------
CCR1036-12G-4S, several 952Ui-5ac2nD, ...
 
pe1chl
Forum Guru
Forum Guru
Posts: 5711
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Sep 26, 2016 4:05 pm

Ok it helped for me for another ancient device...
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24141
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.37rc [release candidate] is released, only one wireless package!

Mon Sep 26, 2016 4:15 pm

6.37 is out. Please start separate topics about specific issues or questions
No answer to your question? How to write posts

Who is online

Users browsing this forum: No registered users and 8 guests