Community discussions

MUM Europe 2020
 
User avatar
PaulsMT
MikroTik Support
MikroTik Support
Topic Author
Posts: 283
Joined: Tue Feb 10, 2015 3:21 pm

The Dude, v6.39rc test builds.

Thu Jan 05, 2017 2:57 pm

Changes in v6.39rc7:

*) Fixed - Tool fetch didn't work with notification - execute on server
*) Fixed - Link type speed was not recognised
*) Fixed - Charts made some strange peaks
*) Added - Right click tool option under Devices -> RouterOS -> simple queues
*) Fixed - Broken Simple queue edit/delete feature
*) Fixed - Dude showed only part of all Simple queue
 
digicomtech
Frequent Visitor
Frequent Visitor
Posts: 75
Joined: Fri Apr 20, 2007 5:03 pm
Location: Alma, Qc, Canada
Contact:

Re: The Dude, v6.39rc test builds.

Thu Jan 05, 2017 6:39 pm

Any change to get something others than name in terminal or with API ?
/dude device print where 
.dead  .id  .nextid  comment  name
Regards,
Michael Plourde
Digicom Technologies
 
francisconeto
Trainer
Trainer
Posts: 22
Joined: Thu Nov 10, 2011 5:55 pm

Re: The Dude, v6.39rc test builds.

Thu Jan 05, 2017 7:46 pm

Any change to get something others than name in terminal or with API ?
/dude device print where 
.dead  .id  .nextid  comment  name
Regards,
Michael Plourde
Digicom Technologies
+1

I realy need this.
 
AiroSam
just joined
Posts: 23
Joined: Mon Jan 30, 2012 7:48 pm
Location: Oklahoma, USA

Re: The Dude, v6.39rc test builds.

Thu Jan 05, 2017 8:34 pm

1. Any timeline for the built-in Winbox tool to return?

2. I'm encountering some bugs with adding/removing/enabling/disabling IP addresses on RouterOS devices. I am able to add an IP, but the Interface box won't show any of the interfaces to select. I can add the IP anyways, but it shows up as red. If I try to remove it or any pre-existing IP, I get the error message ERROR: Object List-0x825ce30-Root(1): doRemove Object List-0x825d358-History Actions(2) not implemented (6). I get a similar error message if I try to disable an IP. Not sure if I'm doing something wrong, or if it's a problem with 6.38.
Example is below
Image
 
User avatar
PaulsMT
MikroTik Support
MikroTik Support
Topic Author
Posts: 283
Joined: Tue Feb 10, 2015 3:21 pm

Re: The Dude, v6.39rc test builds.

Fri Jan 06, 2017 9:28 am

At the moment we can't promise any date about CLI Dude.

AiroSam - Please update your Dude server to the latest RC (6.39rc7), and check if device Status=up and RouterOS Status=ok
 
AiroSam
just joined
Posts: 23
Joined: Mon Jan 30, 2012 7:48 pm
Location: Oklahoma, USA

Re: The Dude, v6.39rc test builds.

Fri Jan 06, 2017 5:11 pm

At the moment we can't promise any date about CLI Dude.

AiroSam - Please update your Dude server to the latest RC (6.39rc7), and check if device Status=up and RouterOS Status=ok
PaulsMT,

Thank you for the reply. Updating to 6.39rc7 mostly fixed the issue. I am now able to successfully add/remove/disable/enable IP addresses. Status and RouterOS Status both show "ok".

It still won't show any interfaces to assign the IP to, unfortunately.
Image


I should also note that my colleague and I were having some crashing issues on 6.38 that were seemingly resolved on 6.39rc7 :)
 
maviaelsilva
just joined
Posts: 1
Joined: Fri Jan 06, 2017 8:14 pm
Location: Brasil

Re: The Dude, v6.39rc test builds.

Fri Jan 06, 2017 8:24 pm

Dear,

The winbox in context menu is not available from dude. Is it a bug?

Image

Best Regards
Best Regards
Maviael Silva
 
robo9
just joined
Posts: 5
Joined: Sat Jan 07, 2017 1:10 pm

Re: The Dude, v6.39rc test builds.

Sat Jan 07, 2017 1:24 pm

Any change to get something others than name in terminal or with API ?
/dude device print where 
.dead  .id  .nextid  comment  name
Regards,
Michael Plourde
Digicom Technologies
I really need this too, thanks
 
Lakis
Forum Veteran
Forum Veteran
Posts: 701
Joined: Wed Sep 23, 2009 7:52 pm

Re: The Dude, v6.39rc test builds.

Sat Jan 07, 2017 4:45 pm

In log when a service is down, the message for it should be in red color like in v3.6
Also, future request, if we can add custom color for log messages from some specified services?

Thanks.
 
rzirzi
Member
Member
Posts: 382
Joined: Mon Oct 09, 2006 2:33 pm

Re: The Dude, v6.39rc test builds.

Sat Jan 07, 2017 6:16 pm

MikroTik team - PLEASE - add to the Dude scheduled ROS upgrade with selected package.
I wold like to upgrade customers MikroTik devices (CPE) nightly, so scheduled update would be great, as is at a...rCon...ol :)
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8321
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: The Dude, v6.39rc test builds.

Sun Jan 08, 2017 2:26 am

Dude -> Probes -> ping:

looks like Retry Count and Retry Interval are somehow connected. I opened it, and Interval was set to '3' and was red. I set it to 300 (ms), and now Count is '300' too
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
ste
Forum Guru
Forum Guru
Posts: 1815
Joined: Sun Feb 13, 2005 11:21 pm

Re: The Dude, v6.39rc test builds.

Sun Jan 08, 2017 8:46 am

MikroTik team - PLEASE - add to the Dude scheduled ROS upgrade with selected package.
I wold like to upgrade customers MikroTik devices (CPE) nightly, so scheduled update would be great, as is at a...rCon...ol :)
+1

Doing Updates is one of the main usages of dude. We would like to update at very early morning hours and control in the morning.
 
mysz0n
Member Candidate
Member Candidate
Posts: 125
Joined: Tue Mar 03, 2009 2:14 am

Re: The Dude, v6.39rc test builds.

Mon Jan 09, 2017 4:11 pm

I'd love to be able to add new maps and devices from the CLI or API.
At the moment I'm testing new DUDE on some small map with ~ 100 devices, but on the old DUDE i have map with more than 1,000 devices
I would like to read device status from the CLI or API.
 
User avatar
Campano
Frequent Visitor
Frequent Visitor
Posts: 60
Joined: Mon Apr 17, 2006 2:35 am
Location: Ñuñoa - Chile
Contact:

Re: The Dude, v6.39rc test builds.

Mon Jan 09, 2017 9:57 pm

Hello! Links change according to their use? I use v6.38 en CHR but even link is full no change color :(
 
User avatar
PaulsMT
MikroTik Support
MikroTik Support
Topic Author
Posts: 283
Joined: Tue Feb 10, 2015 3:21 pm

Re: The Dude, v6.39rc test builds.

Tue Jan 10, 2017 12:40 pm

AiroSam - Thanks, Interface dropdown will be fixed in next rc version.
Also the server crash on 6.38 is fixed, and will be included in next 6.38.x version.


maviaelsilva - Default Winbox tool is removed, please use tools to specify path to your Winbox.exe file:
http://wiki.mikrotik.com/wiki/Manual:The_Dude_v6/Tools


robo9 - CLI is still in our To-Do list.

Lakis, rzirzi - Both requests sent to developers.

Chupaka - Thanks, but I wasn't able to reproduce.

Campano - The link should change colour, if the specified speed is smaller than actual bps. Check what link type you are using, and what is default speed value for this type.

Image
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8321
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: The Dude, v6.39rc test builds.

Tue Jan 10, 2017 1:17 pm

Chupaka - Thanks, but I wasn't able to reproduce.
I can reproduce it via WinBox from 2 PCs and via WebFig: as soon as I change Retry Interval and press 'Apply', Retry Count is set to that new number. it's x86, checked v6.38 and v6.39rc7 (two different routers). will supout help you? or I can give you remote access :)
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
User avatar
PaulsMT
MikroTik Support
MikroTik Support
Topic Author
Posts: 283
Joined: Tue Feb 10, 2015 3:21 pm

Re: The Dude, v6.39rc test builds.

Tue Jan 10, 2017 2:02 pm

Chupaka - Thanks, but I wasn't able to reproduce.
I can reproduce it via WinBox from 2 PCs and via WebFig: as soon as I change Retry Interval and press 'Apply', Retry Count is set to that new number. it's x86, checked v6.38 and v6.39rc7 (two different routers). will supout help you? or I can give you remote access :)
The problem didn't appear in the Dude client. Reproduced/Reported in Winbox/Webfig. Thanks
 
asik
just joined
Posts: 20
Joined: Tue Sep 20, 2016 3:12 pm

Re: The Dude, v6.39rc test builds.

Tue Jan 10, 2017 11:10 pm

in menu:
devices/RouterOS/Wireless Registration

i don't have information about:
- Radio Name
- TX/RX Rate
- TX/RX Signal
 
pitersss2
just joined
Posts: 1
Joined: Wed Jan 11, 2017 12:09 pm

Re: The Dude, v6.39rc test builds.

Wed Jan 11, 2017 12:51 pm

Problem is the Dude. I got RB750gr3 with 6.39rc7 (Release candidate) and I can't put image to folder \images or \mib. I'm trying via winbox and ftp client. I check version 6.38. Problem this same. I think this folder doesn't got permission. Please fix it.
 
User avatar
PaulsMT
MikroTik Support
MikroTik Support
Topic Author
Posts: 283
Joined: Tue Feb 10, 2015 3:21 pm

Re: The Dude, v6.39rc test builds.

Wed Jan 11, 2017 1:03 pm

asik - thanks, reporeted.

pitersss2 - To avoid some problems related to Dude, follow these suggestions:

*) It is suggested to use only ext3 file format for the Dude data directory, it's more stable for the Dude.
*) Store your custom files Only in dude/files directory
 
asik
just joined
Posts: 20
Joined: Tue Sep 20, 2016 3:12 pm

Re: The Dude, v6.39rc test builds.

Wed Jan 11, 2017 9:19 pm

Once again.
I turn attention to it because it's a natural and important functionality for the program to monitor the network.

I will try to explain well.

When there is a tree of connections between devices, and the first of them stops working, "the dude" send notifications about failure of all devices below tree. Example for 200 devices.

Imagine that, when sms is a notification, and I get 200 sms messages about not running devices when the first device stop working. I should get one notification about failure for highest devices on the parents tree.
 
minelli
newbie
Posts: 41
Joined: Tue Feb 26, 2008 2:36 am

Re: The Dude, v6.39rc test builds.

Wed Jan 11, 2017 11:45 pm

When I click the right mouse button, I can no longer find the Winbox device access option.
In RouterOS Dude Tools I also do not see it anymore.
 
aTan
Frequent Visitor
Frequent Visitor
Posts: 52
Joined: Tue Nov 01, 2011 11:55 am

Re: The Dude, v6.39rc test builds.

Thu Jan 12, 2017 10:38 am

When I click the right mouse button, I can no longer find the Winbox device access option.
In RouterOS Dude Tools I also do not see it anymore.
7th post above yours.
Default Winbox tool is removed, please use tools to specify path to your Winbox.exe file:
http://wiki.mikrotik.com/wiki/Manual:The_Dude_v6/Tools
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8321
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: The Dude, v6.39rc test builds.

Thu Jan 12, 2017 1:34 pm

When there is a tree of connections between devices, and the first of them stops working, "the dude" send notifications about failure of all devices below tree. Example for 200 devices.
isn't that what 'Parents' property for? at least in v3.6 :) I doubt they removed it in v6.x
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
asik
just joined
Posts: 20
Joined: Tue Sep 20, 2016 3:12 pm

Re: The Dude, v6.39rc test builds.

Thu Jan 12, 2017 4:28 pm

When there is a tree of connections between devices, and the first of them stops working, "the dude" send notifications about failure of all devices below tree. Example for 200 devices.
isn't that what 'Parents' property for? at least in v3.6 :) I doubt they removed it in v6.x
;-) Let's not talk about the obvious, is that possibility, but does work in your configuration? in my not. Please click the link to the post stated below:

http://forum.mikrotik.com/viewtopic.php ... 52#p562649
 
tberg
newbie
Posts: 30
Joined: Sun Sep 22, 2013 6:34 pm

Re: The Dude, v6.39rc test builds.

Thu Jan 12, 2017 8:04 pm

asik, I'm having similar or same issue with devices on the same map and I've set the Parents field with upstream device. I'm getting mixed results and haven't had time to try to isolate exactly what is happening. We monitor independent customer sites. At some sites I seem to get a notification for all devices (approx 50) when their Internet goes down. Other sites it is only a few of the devices.

One question I have is do you need to enter all devices in the upstream hierarchy, or just the immediate parent?

Also, what happens when the parent goes down in the middle of the polling cycle for that network? i.e. the parent device goes down after it is polled successfully and the Dude is still polling the downstream devices, so those devices would go to down status before the parent. I assume we would get notification for those devices before the parent. Is the Delay setting for the notification supposed to prevent this?

Sorry if this should be another thread.

Todd
 
asik
just joined
Posts: 20
Joined: Tue Sep 20, 2016 3:12 pm

Re: The Dude, v6.39rc test builds.

Thu Jan 12, 2017 11:39 pm

asik, I'm having similar or same issue with devices on the same map and I've set the Parents field with upstream device. I'm getting mixed results and haven't had time to try to isolate exactly what is happening. We monitor independent customer sites. At some sites I seem to get a notification for all devices (approx 50) when their Internet goes down. Other sites it is only a few of the devices.

One question I have is do you need to enter all devices in the upstream hierarchy, or just the immediate parent?

Also, what happens when the parent goes down in the middle of the polling cycle for that network? i.e. the parent device goes down after it is polled successfully and the Dude is still polling the downstream devices, so those devices would go to down status before the parent. I assume we would get notification for those devices before the parent. Is the Delay setting for the notification supposed to prevent this?

Sorry if this should be another thread.

Todd
tber, thanks for your understanding of the problem, I have quite the same issues.

It seems that the idea for probing devices by "the dude" is to completely rebuild, on stage, dependent of the position the devices in the hierarchy tree.
Intelligent probing on stages, depending on the location of the tree prevent the notification for multiple devices when the main device with access to the Internet goes down should be deploy.
Below a simplification.
Image
 
Filip92
just joined
Posts: 5
Joined: Fri Dec 30, 2016 6:28 pm

Re: The Dude, v6.39rc test builds.

Fri Jan 13, 2017 12:54 am

The new Dude can't read interfaces info from routeros v5.xx and older.
RouterOS status: OK

In the bookmark RouterOS i can see Ip, Router, Arp, Package, File, Registration Table, but Interfaces and Neighbor is empty...

v6.xx works correctly
 
joanllopart
just joined
Posts: 10
Joined: Fri May 06, 2011 8:03 pm

Re: The Dude, v6.39rc test builds.

Fri Jan 13, 2017 9:33 am

It looks like there are issues with SNMP. Interface Traffic Graphs does not show the real traffic the link had, it looks like some SNMP queries are lost. Same devices are graphed with Cacti and/or RouterOS own tool->graphs so I can make the comparison and I'm sure about it.

Also noticed that can't get SMP info from Ubiquiti EdgeSwitches, and previous versions did.
 
User avatar
PaulsMT
MikroTik Support
MikroTik Support
Topic Author
Posts: 283
Joined: Tue Feb 10, 2015 3:21 pm

Re: The Dude, v6.39rc test builds.

Fri Jan 13, 2017 1:46 pm

Changes up to v6.39rc12:

*) Fixed - Submap icon wasn't placed on map if "New Map" option was used.
*) Fixed - Custom tool wasn't accessible from Devices-> List
*) Fixed - Device -> RouterOS didn't show interfaces in interface dropdown list
*) Fixed - Error was displayed when tried to edit multiple simlpe queues

asik - at the moment it's possible to use device tree structure:

[Parent device]
└──────────[Child device]

If Partent device is down (Child device also is not reachable) you will receive notification only about Parent device.
When the parent is reachable again, you will receive notifications about both devices (This will require little change, not to send child notification if it's under parent).

joanllopart - Can you give us example ?

Just note that due to priorities, development of new features/fixes might delayed, but the suggestions/reports are always appreciated and stored.
 
aTan
Frequent Visitor
Frequent Visitor
Posts: 52
Joined: Tue Nov 01, 2011 11:55 am

Re: The Dude, v6.39rc test builds.

Fri Jan 13, 2017 2:42 pm

What about updating the Dude client without Administrator rights? Some kind of portable version maybe?
 
Percanta
newbie
Posts: 39
Joined: Tue Feb 24, 2009 1:00 am

Re: The Dude, v6.39rc test builds.

Fri Jan 13, 2017 4:13 pm

Good day

Please fix this message of error using tools and something is wrong in path or winbox file
Image
Thank you
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8321
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: The Dude, v6.39rc test builds.

Fri Jan 13, 2017 4:26 pm

Good day

Please fix this message of error using tools and something is wrong in path or winbox file
Thank you
if you don't like that the password is shown, try to copy the device and then paste in Notepad. here is the password :)
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
Percanta
newbie
Posts: 39
Joined: Tue Feb 24, 2009 1:00 am

Re: The Dude, v6.39rc test builds.

Fri Jan 13, 2017 4:53 pm

Good day

Please fix this message of error using tools and something is wrong in path or winbox file
Thank you
if you don't like that the password is shown, try to copy the device and then paste in Notepad. here is the password :)
LoL even worst, another thing to fix, we need more security :lol:
 
joanllopart
just joined
Posts: 10
Joined: Fri May 06, 2011 8:03 pm

Re: The Dude, v6.39rc test builds.

Fri Jan 13, 2017 8:28 pm

Changes up to v6.39rc12:

joanllopart - Can you give us example ?
For example CCR1072's port sfpplus8. Graphed by router itself (tools -> graphing):

Image

Same port traffic graphed by cacti:

Image

Now graphed by Dude 6.39rc7:

Image

If we look closer to last hour:

Image

It looks like it loses some SNMP readings when traffic goes over 1Gbps (It's a 10Gbps port). But I've seen similar behaviour on other graph's links that handle much less traffic.
 
User avatar
otgooneo
Trainer
Trainer
Posts: 570
Joined: Tue Dec 01, 2009 3:24 am
Location: Mongolia
Contact:

Re: The Dude, v6.39rc test builds.

Sat Jan 14, 2017 8:53 pm

CLI and API are really needed.
----------------------------
Want to learn more and more...
 
asik
just joined
Posts: 20
Joined: Tue Sep 20, 2016 3:12 pm

Re: The Dude, v6.39rc test builds.

Sun Jan 15, 2017 3:43 pm

Changes up to v6.39rc12:

*) Fixed - Submap icon wasn't placed on map if "New Map" option was used.
*) Fixed - Custom tool wasn't accessible from Devices-> List
*) Fixed - Device -> RouterOS didn't show interfaces in interface dropdown list
*) Fixed - Error was displayed when tried to edit multiple simlpe queues

asik - at the moment it's possible to use device tree structure:

[Parent device]
└──────────[Child device]

If Partent device is down (Child device also is not reachable) you will receive notification only about Parent device.
When the parent is reachable again, you will receive notifications about both devices (This will require little change, not to send child notification if it's under parent).
PaulsMT - I wish the dude functioned as you write above.
I use device tree structure for my setup (with 400+ devices) and it does not work as expected.
Maybe the problem lies in probing. When a PARENT stops working, often first CHILD is marked down and "the dude" send notification, then "the dude" probe parent device and send notification too. In this way sends multiple notification's about one failure.
If you can't reproduce the problem I can share my dude remotely.
Maybe I have a problem with the configuration? below my settings.
Image
Image
Image
Image
Image
Image
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8321
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: The Dude, v6.39rc test builds.

Mon Jan 16, 2017 2:30 am

When a PARENT stops working, often first CHILD is marked down and "the dude" send notification, then "the dude" probe parent device and send notification too. In this way sends multiple notification's about one failure.
yep, that's because when child is down, parent is still up (as Dude knows). should it queue the notification for some time?..

probably you may play with timeouts (make it shorter for parent or something)
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
cdemers
Member Candidate
Member Candidate
Posts: 184
Joined: Sun Feb 26, 2006 3:32 pm
Location: Canada
Contact:

Re: The Dude, v6.39rc test builds.

Mon Jan 16, 2017 2:58 am

Maybe a suggestion to the developers about this, if a child goes down, check the parent before reporting child down.


Sent from my Nexus 5 using Tapatalk
 
asik
just joined
Posts: 20
Joined: Tue Sep 20, 2016 3:12 pm

Re: The Dude, v6.39rc test builds.

Mon Jan 16, 2017 11:42 am

When a PARENT stops working, often first CHILD is marked down and "the dude" send notification, then "the dude" probe parent device and send notification too. In this way sends multiple notification's about one failure.
yep, that's because when child is down, parent is still up (as Dude knows). should it queue the notification for some time?..

probably you may play with timeouts (make it shorter for parent or something)
Chupaka - change timouts for devices in a big device tree structure is complicated and a there is no sure about the expected results.
I finger crossed, that MT team find solutions for this problem.
 
aTan
Frequent Visitor
Frequent Visitor
Posts: 52
Joined: Tue Nov 01, 2011 11:55 am

Re: The Dude, v6.39rc test builds.

Mon Jan 16, 2017 11:57 am

Not every network is linear. We have a lot of locations with more than one uplink (mixed ring topology), so you cant have a parent device. I think it should be better to have an option to set a watchdog device for the hole submap. So when it is set and is down, the hole submap is marked as offline without multiply notification.
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8321
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: The Dude, v6.39rc test builds.

Mon Jan 16, 2017 4:06 pm

We have a lot of locations with more than one uplink (mixed ring topology), so you cant have a parent device.
well, as I can see, a device can have multiple parents
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
aTan
Frequent Visitor
Frequent Visitor
Posts: 52
Joined: Tue Nov 01, 2011 11:55 am

Re: The Dude, v6.39rc test builds.

Mon Jan 16, 2017 4:12 pm

well, as I can see, a device can have multiple parents
OK, I didn't know it.
 
User avatar
Campano
Frequent Visitor
Frequent Visitor
Posts: 60
Joined: Mon Apr 17, 2006 2:35 am
Location: Ñuñoa - Chile
Contact:

Re: The Dude, v6.39rc test builds.

Mon Jan 16, 2017 8:54 pm

tks for Links examples :D when I tested like your screenshots works!
 
User avatar
PaulsMT
MikroTik Support
MikroTik Support
Topic Author
Posts: 283
Joined: Tue Feb 10, 2015 3:21 pm

Re: The Dude, v6.39rc test builds.

Tue Jan 17, 2017 9:16 am

Changes in v6.39rc13:

*) Fixed - winbox/webfig ping probe used retry interval in retry count field.


aTan - Administrator rights is necessary just in case, if your Dude client fails to update (so far haven't seen problem with using the Dude without administrator rights).

Percanta, Chupaka - Disabling password show in error message would mean to disable argument pass to custom tools, since this feature is used by many customers (with custom tools), we can't disable it.
The same is with copy/paste, which allows you to quickly duplicate devices in the Dude.

joanllopart - I'm not sure about Cacti, but in RouterOS - graph is made from 5 min average data rate. What is polling interval in your Dude graph ?

asik,cdemers - In the next release candidate version (rc14) will be included some fixes for parrent/child notifications.
 
apes
just joined
Posts: 4
Joined: Tue Jan 17, 2017 10:45 am

Re: The Dude, v6.39rc test builds.

Tue Jan 17, 2017 10:52 am

When will you add support for custom fonts (cyrillic)?
 
User avatar
PaulsMT
MikroTik Support
MikroTik Support
Topic Author
Posts: 283
Joined: Tue Feb 10, 2015 3:21 pm

Re: The Dude, v6.39rc test builds.

Tue Jan 17, 2017 10:59 am

When will you add support for custom fonts (cyrillic)?
The problem is known, at the moment can't promise you any dates.
 
joanllopart
just joined
Posts: 10
Joined: Fri May 06, 2011 8:03 pm

Re: The Dude, v6.39rc test builds.

Tue Jan 17, 2017 12:21 pm

joanllopart - I'm not sure about Cacti, but in RouterOS - graph is made from 5 min average data rate. What is polling interval in your Dude graph ?
We imported from 4.0beta3 where graphs has been working fine. I noticed issues with graphs maybe at 6.38. Now graphs ara wrong, specially when they are over 1Gbps, and doesn't get SNMP info from devices like Ubiquiti EdgeSwitch (different models). If you look at my previous post graphs, you'll see how Dude's graphs fail when we have more traffic.

Polling interval 1 minute
Polling timeout 10 seconds

We relay on dude to graph most of our network links, it's quite important they work as expected.
 
rzirzi
Member
Member
Posts: 382
Joined: Mon Oct 09, 2006 2:33 pm

Re: The Dude, v6.39rc test builds.

Tue Jan 17, 2017 1:34 pm

MikroTik team - PLEASE - add to the Dude scheduled ROS upgrade with selected package.
I wold like to upgrade customers MikroTik devices (CPE) nightly, so scheduled update would be great, as is at a...rCon...ol :)
+1
Doing Updates is one of the main usages of dude. We would like to update at very early morning hours and control in the morning.
Yeah....it would be great! I'm using similar feature at competitor software management tool... and it's the most wanted feature at MikroTik The Dude!
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8321
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: The Dude, v6.39rc test builds.

Wed Jan 18, 2017 12:23 am

Looks like this is long-standing regression, but I won't create separate topic for it...

http://wiki.mikrotik.com/wiki/Manual:Co ... tLock_Mode - it says, "Double >> is indication that HotLock mode is enabled."

The problem is I see only single ">" (i.e. nothing visually changes when I enable HotLock). Tested on v6.10, v6.33 and v6.39rc13 in WinBox Terminal and SSH
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
User avatar
PaulsMT
MikroTik Support
MikroTik Support
Topic Author
Posts: 283
Joined: Tue Feb 10, 2015 3:21 pm

Re: The Dude, v6.39rc test builds.

Wed Jan 18, 2017 8:16 am

joanllopart - Seems like there is a small bug with SNMP and UBNT devices, can you please test with just releases 6.37.4 version ? If you get the same results, then its not related and we would need remote access (support@mikrotik.com)
Chupaka - Only [CTRL]+[V] will not show > sign, you will see it in the next newline. Does it really not working ? Just tested, seems to be working fine
 
sparker
just joined
Posts: 23
Joined: Mon Jan 23, 2012 5:48 pm
Location: Russia / Chelyabinsk

Re: The Dude, v6.39rc test builds.

Wed Jan 18, 2017 8:39 am

Is support snmp-traps is planned?
Sorry for my English.
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8321
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: The Dude, v6.39rc test builds.

Wed Jan 18, 2017 5:04 pm

Only [CTRL]+[V] will not show > sign, you will see it in the next newline. Does it really not working ? Just tested, seems to be working fine
oh, I see it. can't it be fixed to show real-time situation? not an important thing but just a cosmetic fix
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
lgualla
just joined
Posts: 2
Joined: Wed Jan 18, 2017 4:58 pm

Re: The Dude, v6.39rc test builds.

Wed Jan 18, 2017 5:10 pm

My dude map on 6.39rc13 doesn't show interfaces in SNMP > Interfaces with devices like Cisco 3750-X
Also, in link's labels, doesn't show RX TX information with devices like IBM RackSwitch G7028, HP Proliant servers, 3COM 2948 plus, Ubiquiti Nanobridge M5. (But in the SNMP > Interface list they are correctly shown with traffic rates and all).


(Spanglish)
 
User avatar
FFAMax
newbie
Posts: 28
Joined: Sat Oct 01, 2016 12:50 am

Re: The Dude, v6.39rc test builds.

Thu Jan 19, 2017 12:12 am

Guys, i use function for obtain time info
oid_raw("1.3.6.1.4.1.318.1.1.1.2.2.3.0")/100/60
but in 39.rc13 this does not work, just return "0".

If i detete /100/60 then working fine: "00:48:00.00"

So how i can now divide?
 
dpilibosian
just joined
Posts: 9
Joined: Thu Jan 19, 2017 8:57 pm

Re: The Dude, v6.39rc test builds.

Thu Jan 19, 2017 9:17 pm

joanllopart - I'm not sure about Cacti, but in RouterOS - graph is made from 5 min average data rate. What is polling interval in your Dude graph ?
We imported from 4.0beta3 where graphs has been working fine. I noticed issues with graphs maybe at 6.38. Now graphs ara wrong, specially when they are over 1Gbps, and doesn't get SNMP info from devices like Ubiquiti EdgeSwitch (different models). If you look at my previous post graphs, you'll see how Dude's graphs fail when we have more traffic.

Polling interval 1 minute
Polling timeout 10 seconds

We relay on dude to graph most of our network links, it's quite important they work as expected.
I have reported a similar issue under my previous account from my last job

http://forum.mikrotik.com/viewtopic.php ... 14#p519591

The issue got better once we backed our dude database with a flash array instead of spinning disks and seems to be better in recent builds, it is not entirely gone, a cursory glance shows some graph drops that don't correspond to any other drops upstream or downstream from the link as I would expect if it was real packet loss. I'm getting these issues from a variety of devices, none of the ubnt. I've even had it happen on MTik devices. I will gladly give any and all info required to help solve this issue but it is something that needs to be solved.
 
jchmelik
just joined
Posts: 9
Joined: Wed May 18, 2016 12:18 pm
Location: Pardubice, Czech Republic

Re: The Dude, v6.39rc test builds.

Thu Jan 19, 2017 9:41 pm

When will Dude natively support IPv6?
 
User avatar
bajodel
Long time Member
Long time Member
Posts: 545
Joined: Sun Nov 24, 2013 8:30 am
Location: Italy

Re: The Dude, v6.39rc test builds.

Fri Jan 20, 2017 9:32 am

in my setup, starting from 6.38x, the email notification server PORT setting is ignored (If I put 587, it uses 25 instead). I can't test rc now, could someone please check/confirm ? thanks
 
User avatar
macsrwe
Long time Member
Long time Member
Posts: 656
Joined: Mon Apr 02, 2007 5:43 am
Location: Arizona, USA
Contact:

Re: The Dude, v6.39rc test builds.

Sat Jan 21, 2017 1:43 am

In 6.39rc13, opening Link / General always shows "Interface" field in blue as if it has been changed and not saved. Hitting Apply turns it black, then immediately blue again. A really minor bug (I hope). Originally, I thought it was causing link coloring to fail, but upon further examination, I believe coloration appears to be working properly.
 
User avatar
FFAMax
newbie
Posts: 28
Joined: Sat Oct 01, 2016 12:50 am

Re: The Dude, v6.39rc test builds.

Sat Jan 21, 2017 4:45 am

When editing link speed on map in 6.39 rc13 unable to use shorts like 20M (20 Mbit). Should use 20000000.
Please fix it.
 
asik
just joined
Posts: 20
Joined: Tue Sep 20, 2016 3:12 pm

Re: The Dude, v6.39rc test builds.

Mon Jan 23, 2017 9:37 am

Changes in v6.39rc13:

*) Fixed - winbox/webfig ping probe used retry interval in retry count field.

asik,cdemers - In the next release candidate version (rc14) will be included some fixes for parrent/child notifications.
tested, it looks promising. I inform about malfunction.

Here another problem.
When I open the chart, the dude hangs for a long time, because of the large amount of data to view in chart (from few months).
It is posibility to setup last zooming value as default instead of "all"? like is when i open label beetwen links i have last zooming setup.
Image
 
User avatar
FFAMax
newbie
Posts: 28
Joined: Sat Oct 01, 2016 12:50 am

Re: The Dude, v6.39rc test builds.

Mon Jan 23, 2017 9:40 am

+1

I think should be "default zoom value" i settings for links
 
joanllopart
just joined
Posts: 10
Joined: Fri May 06, 2011 8:03 pm

Re: The Dude, v6.39rc test builds.

Mon Jan 23, 2017 10:58 am

joanllopart - Seems like there is a small bug with SNMP and UBNT devices, can you please test with just releases 6.37.4 version ? If you get the same results, then its not related and we would need remote access (support@mikrotik.com)
Installed 6.37.4 and SNMP polling from Ubiquiti's EdgeSwitch works again.

We don't know if the other issue (graphs on Mikrotiks' links with traffic over 1Gbps) is fixed in 67.37.4, we have to wait some hours ...
 
joanllopart
just joined
Posts: 10
Joined: Fri May 06, 2011 8:03 pm

Re: The Dude, v6.39rc test builds.

Mon Jan 23, 2017 11:11 am

joanllopart - I'm not sure about Cacti, but in RouterOS - graph is made from 5 min average data rate. What is polling interval in your Dude graph ?
We imported from 4.0beta3 where graphs has been working fine. I noticed issues with graphs maybe at 6.38. Now graphs ara wrong, specially when they are over 1Gbps, and doesn't get SNMP info from devices like Ubiquiti EdgeSwitch (different models). If you look at my previous post graphs, you'll see how Dude's graphs fail when we have more traffic.

Polling interval 1 minute
Polling timeout 10 seconds

We relay on dude to graph most of our network links, it's quite important they work as expected.
I have reported a similar issue under my previous account from my last job

http://forum.mikrotik.com/viewtopic.php ... 14#p519591

The issue got better once we backed our dude database with a flash array instead of spinning disks and seems to be better in recent builds, it is not entirely gone, a cursory glance shows some graph drops that don't correspond to any other drops upstream or downstream from the link as I would expect if it was real packet loss. I'm getting these issues from a variety of devices, none of the ubnt. I've even had it happen on MTik devices. I will gladly give any and all info required to help solve this issue but it is something that needs to be solved.
Graph isues are with any kind of device link, not just Ubnt. We are somehow used to those spikes. The problem we have with last versions is that it fails to graph properly when traffic is over 1Gbps. An example with two graphs on same interface, secod graph is the one that shows real traffic:

Graphed by Dude, SNMP polling on CCR1072:

Image

Graphed by CCR1072:

Image
 
asik
just joined
Posts: 20
Joined: Tue Sep 20, 2016 3:12 pm

Re: The Dude, v6.39rc test builds.

Mon Jan 23, 2017 11:28 am

it's posiblle to view created chart's in the dude via web like graphing in routerOS?
Image
 
User avatar
bajodel
Long time Member
Long time Member
Posts: 545
Joined: Sun Nov 24, 2013 8:30 am
Location: Italy

Re: The Dude, v6.39rc test builds.

Tue Jan 24, 2017 7:39 pm

in my setup, starting from 6.38x, the email notification server PORT setting is ignored (If I put 587, it uses 25 instead). I can't test rc now, could someone please check/confirm ? thanks
Am I the only one ?

(x86 dude)
 
gammy69er
newbie
Posts: 46
Joined: Sun May 18, 2014 3:01 am

Re: The Dude, v6.39rc test builds.

Tue Jan 24, 2017 11:27 pm

Bug Report.

Unsure if this affects other element types at this stage, but Copy/Paste on Network Elements goes onto new map - but holds Network Map ID information, rather than changing the information to the new map

Adjusting XML net map ID Corrects adjusts, but creates 2 times the work - almost faster to just make each manually.

Here is a copy of some of the XML - Highlighted in Red is the Offending variable, Green is the Correct Variable - which relates to the current map

<?xml version="1.0" ?>
<dude version="6.39rc17">
<Network>
<sys-id>XXXXXXXX</sys-id>
<sys-name>PPTP-XXX</sys-name>
<subnets>x.x.x.x/32</subnets>
<netMapID>11778236</netMapID>
<netMapElementID>XXXXXXXX</netMapElementID>
</Network>
<Note>
<sys-id>XXXXXXXX</sys-id>
<sys-name>Name:XXXXXXXXX</sys-name>
<objID>XXXXXXXX</objID>
<timeAdded>Jan/24/2017 20:48:32</timeAdded>
</Note>
<NetworkMapElement>
<sys-id>XXXXXXXX</sys-id>
<sys-name>[Network.Name]\0d\0a[Network.SubnetsColumn]</sys-name>
<mapID>11789731</mapID>
<itemType>network</itemType>
<itemID>XXXXXXXX</itemID>
<itemX>72</itemX>
<itemY>227</itemY>
<itemUseLabel>yes</itemUseLabel>
<itemUseShape>yes</itemUseShape>
<itemUpColor>FFFF53</itemUpColor>
<itemShape>cloud</itemShape>
<itemFont>0B00000000000000000000000000000000000000000000010000000042697473747265616D20566572612053616E7300000000000000000000000000</itemFont>
</NetworkMapElement>

Just to note - these elements were copied in 6.38rc41, but this is also still produced in 6.39rc17 when copying these elements.

The Problem is the Network Map ID dictates the "Map" Listing under the Networks List

Image

Sorry for the redaction - not too sure about our sensitivity at this stage (better to be safe than sorry). as you can see here though, all the Map Names are the same - but the note indicates that they are in different areas, and I have checked - they are.

Any statements on this would be awesome, and a fix would be epic :)
 
User avatar
macsrwe
Long time Member
Long time Member
Posts: 656
Joined: Mon Apr 02, 2007 5:43 am
Location: Arizona, USA
Contact:

Re: The Dude, v6.39rc test builds.

Wed Jan 25, 2017 4:32 am

Since putting up 6.39rc13, a large portion of my network got stuck in this state:

wrong challenge (not requested)(4)

whatever that means. I can't see link status or do bandwidth tests to those devices until I call each one up by hand and do a manual Reconnect. They're still green and all, but Dude can't talk to them.
 
User avatar
PaulsMT
MikroTik Support
MikroTik Support
Topic Author
Posts: 283
Joined: Tue Feb 10, 2015 3:21 pm

Re: The Dude, v6.39rc test builds.

Wed Jan 25, 2017 10:13 am

Changes in v6.39rc17:

*) Fixed - wireless registration table didn't show values in all fields.
*) Fixed - Device tree notification system were not working properly.
*) Fixed - Client started from shortcut with added arguments tried to use 2210/2211 ports

joanllopart - at the moment I can only suggest you to use RouterOS as mastering type in cases where the link speed is above 1Gbps.
bajodel - thanks, problem is reproduced.
gammy69er - moving devices between maps is in our to-do list.
macsrwe - If you can repeat the problem in rc17, please write to support@mikrotik.com
 
User avatar
FFAMax
newbie
Posts: 28
Joined: Sat Oct 01, 2016 12:50 am

Re: The Dude, v6.39rc test builds.

Wed Jan 25, 2017 10:17 am

Changes in v6.39rc17:

*) Fixed - wireless registration table didn't show values in all fields.
*) Fixed - Device tree notification system were not working properly.
*) Fixed - Client started from shortcut with added arguments tried to use 2210/2211 ports

joanllopart - at the moment I can only suggest you to use RouterOS as mastering type in cases where the link speed is above 1Gbps.
bajodel - thanks, problem is reproduced.
gammy69er - moving devices between maps is in our to-do list.
macsrwe - If you can repeat the problem in rc17, please write to support@mikrotik.com
Hello, Pauls!

But what about my issue http://forum.mikrotik.com/viewtopic.php ... 13#p578559?
 
User avatar
PaulsMT
MikroTik Support
MikroTik Support
Topic Author
Posts: 283
Joined: Tue Feb 10, 2015 3:21 pm

Re: The Dude, v6.39rc test builds.

Wed Jan 25, 2017 10:43 am

Quick tests didn't show problems. Make sure that you are dividing only integers.
 
User avatar
FFAMax
newbie
Posts: 28
Joined: Sat Oct 01, 2016 12:50 am

Re: The Dude, v6.39rc test builds.

Wed Jan 25, 2017 11:13 am

Quick tests didn't show problems. Make sure that you are dividing only integers.
If i rightly understand, in my case TimeTicks (oid 1.3.6.1.4.1.318.1.1.1.2.2.3)
This worked before but now broken.
 
joanllopart
just joined
Posts: 10
Joined: Fri May 06, 2011 8:03 pm

Re: The Dude, v6.39rc test builds.

Wed Jan 25, 2017 1:47 pm

joanllopart - at the moment I can only suggest you to use RouterOS as mastering type in cases where the link speed is above 1Gbps.
Selecting mastering type = RouterOS does not lists any interfaces in the drop-list. And yes, there is a valid user/password set.
 
asik
just joined
Posts: 20
Joined: Tue Sep 20, 2016 3:12 pm

Re: The Dude, v6.39rc test builds.

Wed Jan 25, 2017 7:14 pm

Changes in v6.39rc13:

*) Fixed - winbox/webfig ping probe used retry interval in retry count field.

asik,cdemers - In the next release candidate version (rc14) will be included some fixes for parrent/child notifications.
tested, it looks promising. I inform about malfunction.
not working as expected, in this device tree structure at the end of a large tree:

......3 parent____
...........................|2 child______
.................................................|__________________________
.......................................................|1a child..........|1b child..........|1c child


when (3) parent stoped working i have got notifications in the order received:

when DOWN:
1a child
1b child
3 parent

when UP:
3 parent
1a child

in this configuration:
http://forum.mikrotik.com/viewtopic.php ... 71#p577808


UPDATE:
I have different notyfication behavior every time when i do a controlled failure.
 
User avatar
jstump
newbie
Posts: 44
Joined: Mon May 04, 2015 6:57 pm
Contact:

Re: The Dude, v6.39rc test builds.

Thu Jan 26, 2017 7:42 pm

Can we please add the ability to type something like 20M under link speed (like btest, etc) instead of having to type 20000000? Those of us with a lot of 10G and 1G links would really appreciate it!
 
User avatar
macsrwe
Long time Member
Long time Member
Posts: 656
Joined: Mon Apr 02, 2007 5:43 am
Location: Arizona, USA
Contact:

Re: The Dude, v6.39rc test builds.

Fri Jan 27, 2017 10:54 am

Changes in v6.39rc17:
macsrwe - If you can repeat the problem in rc17, please write to support@mikrotik.com
Reset all the "wrong challenge" units yesterday by manually Reconnecting. Upgraded to rc17 last night. Tonight, I see I have two CPEs again stuck in the "wrong challenge (not requested)(4)" state. I'll send in an error report.

It also would be nice to know what that error message is supposed to mean.
 
Micropower
just joined
Posts: 22
Joined: Fri Jan 06, 2017 11:57 pm

Re: The Dude, v6.39rc test builds.

Thu Feb 02, 2017 2:51 am

Running 6.38.1 on a 20 ROS device Network. Since the Dude is Evolving, Is it Recommend to Run Dude 39.x.rc ( Latest ) on just the ROS+Dude-Hex Server
or will the older versions of ROS on Network cause issues? Best to use an entry in " IP Firewall Address List" for Discovery Blacklist ?
 
milhorini
just joined
Posts: 6
Joined: Fri Mar 21, 2014 1:41 pm

Re: The Dude, v6.39rc test builds.

Fri Feb 03, 2017 5:31 pm

Hi...

I need list device with stats down via cli, is possible?????
 
me9
just joined
Posts: 2
Joined: Tue Feb 07, 2017 12:39 pm

Re: The Dude, v6.39rc test builds.

Wed Feb 08, 2017 12:11 am

Hi.
Image
 
arxdust
just joined
Posts: 4
Joined: Sat Nov 05, 2016 5:27 pm

Re: The Dude, v6.39rc test builds.

Fri Feb 10, 2017 5:37 pm

Please add centralized storage backups of all devices under management RouterOS on dude server. For example: create backups by schedule, restore backups. As well as a choice save to internal or external storage.
 
User avatar
macsrwe
Long time Member
Long time Member
Posts: 656
Joined: Mon Apr 02, 2007 5:43 am
Location: Arizona, USA
Contact:

Re: v6.39rc [release candidate] is released

Sun Feb 12, 2017 1:52 am

There's been this display bug that's been in Dude since the old version of years ago: that is that the background image entirely disappears at some resolutions.

It used to be that at resolution 200%, the background turned to white. Every other resolution (including 100% and 400%) showed the background image just fine.

I just rebooted my Dude server to 6.39rc27, and the behavior now is even weirder. At the far northwest end of my map, all resolutions work fine. Move a little further SE and only the 400% resolution background is white. Further still, and both the 200% and 400% resolutions show the problem. Even further, and only the 200% resolution shows the problem. At the far southeast end, again both the 200% and 400% resolutions show the problem. It is entirely position-dependent, and entirely repeatable.

Am I the only one experiencing this?
 
vosgessystemes
just joined
Posts: 8
Joined: Tue Jan 05, 2016 12:08 pm

Re: The Dude, v6.39rc test builds.

Wed Feb 15, 2017 10:47 am

Hello,

We really need two link between two routerOS on our network map... Please :)

Br,

Julien
 
jarda
Forum Guru
Forum Guru
Posts: 7604
Joined: Mon Oct 22, 2012 4:46 pm

Re: RE: Re: The Dude, v6.39rc test builds.

Wed Feb 15, 2017 7:45 pm

Hello,

We really need two link between two routerOS on our network map... Please :)

Br,

Julien
Even two are not enough sometimes. Using dummy device in between is a nightmare.
 
ryz
just joined
Posts: 13
Joined: Sun May 27, 2007 5:10 pm

Re: The Dude, v6.39rc test builds.

Wed Feb 15, 2017 7:58 pm

Is support snmp-traps is planned?
 
heaven
just joined
Posts: 13
Joined: Mon Aug 15, 2016 12:14 pm

Re: The Dude, v6.39rc test builds.

Thu Feb 16, 2017 8:09 am

Somebody faced with problem in nat rules? When I try to add new scrnat rule, src,dst,any port was not activied. Maybe somebody speak about that but I not find it. Sorry for flood.
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8321
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: The Dude, v6.39rc test builds.

Thu Feb 16, 2017 2:24 pm

Somebody faced with problem in nat rules? When I try to add new scrnat rule, src,dst,any port was not activied. Maybe somebody speak about that but I not find it. Sorry for flood.
upgrade your WinBox, this was fixed in v3.9
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
raffav
Member Candidate
Member Candidate
Posts: 291
Joined: Wed Oct 24, 2012 4:40 am

Re: The Dude, v6.39rc test builds.

Tue Feb 21, 2017 4:19 pm

Hello,
i don't know if is a Dude Problem or ROS Problem or Winbox
but i can not change value using the "dude on winbox"
ie on dude/probe if i change a port number and save it return to the default value
 
asik
just joined
Posts: 20
Joined: Tue Sep 20, 2016 3:12 pm

Re: The Dude, v6.39rc test builds.

Thu Feb 23, 2017 9:11 pm

- problem with dissapearing background image on main map still exist. It appeared on upgrade from 6.39rc25 to 6.39rc35
- problem with notifications still exist on larger setup in 6.39rc25 (400+ devices, but i see improve in functioning)

update: some image used for map apperance missing too and was automatically removed from dude/files/images
 
aTan
Frequent Visitor
Frequent Visitor
Posts: 52
Joined: Tue Nov 01, 2011 11:55 am

Re: The Dude, v6.39rc test builds.

Wed Mar 01, 2017 4:40 pm

I still can't auto upgrade the Dude client under Windows 10. It does the same under Administrator account and under non-Administrator account. Tries to download some dlls and then nothing. Surprisingly it successfully auto upgrades under Linux and Wine. No problems at all. After downloading dlls the Dude client restarts and a new version is running. Maybe there is something with UAC. The Dude client doesn't ask for Administrator rights during upgrade. So it can be the source of the problem.

UPDATE: Tried on several PCs. One PC with disabled UAC upgrades the Dude client without any problem.
 
User avatar
ploquets
Member Candidate
Member Candidate
Posts: 128
Joined: Tue Nov 17, 2015 12:49 pm
Location: Uruguaiana, RS, Brazil
Contact:

Re: The Dude, v6.39rc test builds.

Fri Mar 03, 2017 8:53 pm

It does the same under Administrator account and under non-Administrator account.
What if you execute Dude as administrator from any account ? Maybe it will grant permissions to be updated.
 
mysz0n
Member Candidate
Member Candidate
Posts: 125
Joined: Tue Mar 03, 2009 2:14 am

Re: The Dude, v6.39rc test builds.

Tue Mar 07, 2017 3:06 pm

Just updated my 3011 to 6.39.rc.45
I don't see speed on links and graphs

https://drive.google.com/file/d/0Bz1c8I ... sp=sharing
 
aTan
Frequent Visitor
Frequent Visitor
Posts: 52
Joined: Tue Nov 01, 2011 11:55 am

Re: The Dude, v6.39rc test builds.

Thu Mar 09, 2017 10:08 am

What if you execute Dude as administrator from any account ? Maybe it will grant permissions to be updated.
It works when it is run as Administrator. But it is not correct behavior. It should prompt for elevation (UAC) before update.
 
apes
just joined
Posts: 4
Joined: Tue Jan 17, 2017 10:45 am

Re: The Dude, v6.39rc test builds.

Thu Mar 09, 2017 5:54 pm

We really need custom fonts, when is it possible to provide support for us?
And how to recreate snmp profile 'no-snmp' after deleting? If create profile has version 'none', community field is not empty - it is filled 'public'. Hosts continue to be polled by snmp.
 
nkourtzis
Member Candidate
Member Candidate
Posts: 206
Joined: Tue Dec 11, 2012 12:56 am
Location: Greece

Re: The Dude, v6.39rc test builds.

Thu Mar 23, 2017 10:37 am

What if you execute Dude as administrator from any account ? Maybe it will grant permissions to be updated.
It works when it is run as Administrator. But it is not correct behavior. It should prompt for elevation (UAC) before update.
I agree! Furthermore, having to run Dude as admin every time, prevents it from running at login and also, in multi-user PCs, it makes it use a common server list instead of a personal one for the user.
Passionate about networks
Enthusiastic about Mikrotik
MTCNA | MTCRE | MTCINE

No trees were killed to send this message,
but a large number of electrons were terribly inconvenienced.
 
User avatar
macsrwe
Long time Member
Long time Member
Posts: 656
Joined: Mon Apr 02, 2007 5:43 am
Location: Arizona, USA
Contact:

Re: The Dude, v6.39rc test builds.

Sun Mar 26, 2017 11:35 pm

Since putting up 6.39rc13, a large portion of my network got stuck in this state:

wrong challenge (not requested)(4)

whatever that means. I can't see link status or do bandwidth tests to those devices until I call each one up by hand and do a manual Reconnect. They're still green and all, but Dude can't talk to them.
Just an update that this problem persists in the latest version. Still awaiting any response from support.
 
mysz0n
Member Candidate
Member Candidate
Posts: 125
Joined: Tue Mar 03, 2009 2:14 am

Re: The Dude, v6.39rc test builds.

Sun Mar 26, 2017 11:41 pm

Try to Vacuum database. I got the same issue I did the vacuum and it helped me
 
User avatar
macsrwe
Long time Member
Long time Member
Posts: 656
Joined: Mon Apr 02, 2007 5:43 am
Location: Arizona, USA
Contact:

Re: The Dude, v6.39rc test builds.

Mon Mar 27, 2017 4:55 am

Apparently, I cannot vacuum the database. I'm running on a hEX, which has limited "RAMdisk" storage. A number of references claim that vacuum uses the same store as the Dude DB, but either that isn't true or it has gotten broken since -- I have tons of space on that drive, but when I run vacuum, I watch the free space indicator in the Files window go from 42% to 0% and then the vacuum aborts. I've filed a support request.
 
User avatar
dash
newbie
Posts: 37
Joined: Tue Apr 28, 2015 12:05 pm

Re: The Dude, v6.39rc test builds.

Thu Mar 30, 2017 1:17 pm

- DELETED -
posted under the wrong topic
Last edited by dash on Thu Mar 30, 2017 5:03 pm, edited 1 time in total.
 
mysz0n
Member Candidate
Member Candidate
Posts: 125
Joined: Tue Mar 03, 2009 2:14 am

Re: The Dude, v6.39rc test builds.

Thu Mar 30, 2017 1:20 pm

I am facing issues with the 6.39rc58 on an RB952 (6.39rc58 port1) which is POE powered from an RB3011 (6.38.5, LAN port 10). After updating the RB952 with the rc58 frimware POE does not turn it on again. I had to use the standard 24v power supply to get it up and running before i was able to downgrade to the 6.38.5 package. In 6.38.5 POE works with no issue...
Does it have anything to do with the dude package?
 
User avatar
pietroscherer
Trainer
Trainer
Posts: 170
Joined: Thu Mar 05, 2015 3:05 pm
Location: RS, Brazil
Contact:

Re: The Dude, v6.39rc test builds.

Tue Apr 04, 2017 12:24 am

Does anyone having a problem with "find tool" (Ctrl + F)?
At 6.38.5 is not possible to search using IP Address (nothing is found), only by device names.
In partial change logs, nothing about this was said yet.
Pietro Scherer
http://www.tchesolutions.com.br [ISPs Consulting and Training]
http://www.routermage.com [Backup and Automation System]
:D
 
OnixJonix
Frequent Visitor
Frequent Visitor
Posts: 61
Joined: Thu Jun 22, 2006 11:35 am
Location: Latvia

Request...

Fri Apr 07, 2017 7:20 am

1. (Winbox) In CapsMan REGISTRATION TABLE add column with client IP and Active Host Name like in dhcp server lease section!!

2. (Winbox) In DHCP Lease section when pressed right mouse button on client add Torch and Ping option!!
 
ittcoin
just joined
Posts: 5
Joined: Fri Apr 10, 2015 9:03 am

Re: v6.39rc [release candidate] is released

Mon Apr 10, 2017 5:55 pm

Dear all, I've a problem with dude tools security. When create a tool, for example for winbox and has a problem with the file, winbox.exe, for any reason, in the alert message you can see in plain text the password of the device, that is a big security problem :-S. Any suggestion for solve it? The error windows is: "Execute failed (command: C:\winbox.exe 192.168.0.1. admin "thepasswordinplaintext". The system...." Thanks.
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8321
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: v6.39rc [release candidate] is released

Tue Apr 11, 2017 6:04 pm

Dear all, I've a problem with dude tools security. When create a tool, for example for winbox and has a problem with the file, winbox.exe, for any reason, in the alert message you can see in plain text the password of the device, that is a big security problem :-S. Any suggestion for solve it? The error windows is: "Execute failed (command: C:\winbox.exe 192.168.0.1. admin "thepasswordinplaintext". The system...." Thanks.
it's not a big problem. just copy your device to Clipboard and paste to Notepad - here's the password even without calling WinBox :)
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
sterling
Frequent Visitor
Frequent Visitor
Posts: 74
Joined: Tue Jan 18, 2011 8:55 am

Re: The Dude, v6.39rc test builds.

Wed Apr 12, 2017 3:25 am

Sorry to ask, but have need to upgrade a bunch of core CCR1072 units and CRS units.

When do you think v6.39 final will be available?

It's been since Dec 30 on 6.38 when I upgraded everything and then right after they had a lot of STP/RSTP stuff happen...
 
aTan
Frequent Visitor
Frequent Visitor
Posts: 52
Joined: Tue Nov 01, 2011 11:55 am

Re: v6.39rc [release candidate] is released

Wed Apr 12, 2017 10:21 am

it's not a big problem. just copy your device to Clipboard and paste to Notepad - here's the password even without calling WinBox :)
Unbelievable. :shock:
 
mysz0n
Member Candidate
Member Candidate
Posts: 125
Joined: Tue Mar 03, 2009 2:14 am

Re: The Dude, v6.39rc test builds.

Wed Apr 12, 2017 12:04 pm

After updrade to 6.39rc68 (hex r3) I lost all the files on the usb drive, and in the FILE a nwe folder appeared disk2, I also have disk1 (both empty).
Guess where i kept the backup ...
On Friday I added 100+ test devices to check the stability on hex r3 ...
Thx mikrotik ..
 
mrbartez
just joined
Posts: 1
Joined: Thu Apr 13, 2017 11:59 am

Re: The Dude, v6.39rc test builds.

Thu Apr 13, 2017 12:57 pm

Hello everyone - that's my first post although adventure with mikrotik started many years ago :-)

I have a problem with 64-bit counters. In changelog v6.36: Fixed - diff64 function broken.
I installed dude on mmips (RB750Gr3) - but for this platform dude is available from 6.37.5 version - maybe fix is not implemented for this platform?
I need simple function: diff64(oid_raw("1.3.6.1.2.1.31.1.1.1.10.436400128")) - oid_raw return correct value but diff64 from oid_raw value return "0". On 4.0beta3 its ok
Additionally there is some problem with reading 64 bit count. If interface speed is more than 1Gb build-in function e.g. Interface.InBitRate looks like reading 32-bit count because value which show is not correct - much lower. I set on link snmp-type and speed (10g ethernet) but there is no difference. On label visible max speed is 4.29Gbps. I tried a few different version - the same problem.
 
nje431
newbie
Posts: 41
Joined: Tue Sep 10, 2013 5:17 pm

Re: The Dude, v6.39rc test builds.

Thu Apr 13, 2017 3:12 pm

Hello everyone - that's my first post although adventure with mikrotik started many years ago :-)

I have a problem with 64-bit counters. In changelog v6.36: Fixed - diff64 function broken.
I installed dude on mmips (RB750Gr3) - but for this platform dude is available from 6.37.5 version - maybe fix is not implemented for this platform?
I need simple function: diff64(oid_raw("1.3.6.1.2.1.31.1.1.1.10.436400128")) - oid_raw return correct value but diff64 from oid_raw value return "0". On 4.0beta3 its ok
Additionally there is some problem with reading 64 bit count. If interface speed is more than 1Gb build-in function e.g. Interface.InBitRate looks like reading 32-bit count because value which show is not correct - much lower. I set on link snmp-type and speed (10g ethernet) but there is no difference. On label visible max speed is 4.29Gbps. I tried a few different version - the same problem.
It's actually broken on 4.0beta3 as well. While it will take a 64 bit counter as an input, it is a 32 bit signed output. I haven't tried it since it was pronounced fixed.
 
User avatar
macsrwe
Long time Member
Long time Member
Posts: 656
Joined: Mon Apr 02, 2007 5:43 am
Location: Arizona, USA
Contact:

Re: The Dude, v6.39rc test builds.

Sun Apr 16, 2017 11:20 pm

it's not a big problem. just copy your device to Clipboard and paste to Notepad - here's the password even without calling WinBox :)
Unbelievable. :shock:
There are two aspects to this: 1. It's too easy to for any user without advanced credentials to get any password through this or a similar (CSV) hack; and 2. There's no supported provision for a user having advanced credentials to recover a password. My point here is that I pray that MikroTik does not close loophole one without providing feature two first.


Sent from my iPhone using Tapatalk
 
User avatar
macsrwe
Long time Member
Long time Member
Posts: 656
Joined: Mon Apr 02, 2007 5:43 am
Location: Arizona, USA
Contact:

Re: The Dude, v6.39rc test builds.

Mon Apr 17, 2017 3:38 am

Changes in v6.39rc17:
macsrwe - If you can repeat the problem in rc17, please write to support@mikrotik.com
Reset all the "wrong challenge" units yesterday by manually Reconnecting. Upgraded to rc17 last night. Tonight, I see I have two CPEs again stuck in the "wrong challenge (not requested)(4)" state. I'll send in an error report.

It also would be nice to know what that error message is supposed to mean.
Not only has this problem not been addressed, but yesterday the Windows 10 machine that runs our Dude client did an automatic OS update and an automatic reboot, and failed to restart the client. When I got back to it, there was a (truncated) error message saying something to the effect of the server had refused connection frim the client(!) because of the wrong challenge. I stopped and restarted the client, and it came up, but whatever this wrong challenge thing is, it really needs to get fixed.
 
xeroin
just joined
Posts: 1
Joined: Mon Apr 24, 2017 11:58 am

Re: The Dude, v6.39rc test builds.

Mon Apr 24, 2017 12:06 pm

Good day,can anyone have experienced the problem: use 6.39 Dude,the map added about 1000 of switches that are polled via SNMP when you open the card device is a large delay of about 8-10 seconds,while the server is not overloaded and CPU usage does not exceed 20%,this problem is present? on Dude 4 this problem was not observed
 
eriitguy
Member Candidate
Member Candidate
Posts: 197
Joined: Thu Jan 26, 2017 1:16 pm

Re: The Dude, v6.39rc test builds.

Sat Apr 29, 2017 5:21 pm

Hello!

Please add a possibility to add multiple "To" in Email notification. Something like: user@domain.com, user2@domain.com

And it seems that Dude and Winbox shows different Server address:
Dude
Server Dns Name: smtp.gmail.com

Winbox
Server: 0.0.0.0

Thank you!
Last edited by eriitguy on Tue May 09, 2017 10:16 am, edited 1 time in total.
 
dineshplp
just joined
Posts: 24
Joined: Wed Jan 09, 2008 7:09 am

Re: The Dude, v6.39rc test builds.

Thu May 04, 2017 8:23 am

Upgraded to 6.39.1 and lost the history graphs and nothing in the outage. Running it on CHR. Anyone else facing this issue.
 
dineshplp
just joined
Posts: 24
Joined: Wed Jan 09, 2008 7:09 am

Re: The Dude, v6.39rc test builds.

Thu May 04, 2017 8:54 am

Upgraded to 6.39.1 and lost the history graphs and nothing in the outage. Running it on CHR. Anyone else facing this issue.
rebooted the CHR and now everything is back.
 
mezzovide
just joined
Posts: 6
Joined: Tue Jun 11, 2013 8:02 am

Re: The Dude, v6.39rc test builds.

Thu May 04, 2017 9:57 am

Hi, i have a problem with the dude 6.39rc80 and TP-Link TL-SG105E. When i create a new device for TL-SG105E ping probe return ok(corrupted), and i already checked with normal ping command it returns normal when pinged.
Image

Image
 
User avatar
LouisVisagie
just joined
Posts: 6
Joined: Wed May 29, 2013 9:32 pm
Location: South Africa

Re: The Dude, v6.39rc test builds.

Thu May 04, 2017 9:58 am

Any plans to enable drag & drop of devices into a subnet map?
 
User avatar
ilunne
just joined
Posts: 7
Joined: Fri Sep 30, 2016 3:14 am

Re: The Dude, v6.39rc test builds.

Sat Jun 10, 2017 4:39 am

no more updates?
 
dirtonth
Trainer
Trainer
Posts: 25
Joined: Fri Aug 20, 2004 7:54 pm
Location: Ireland
Contact:

Re: The Dude, v6.39rc test builds.

Fri Jun 16, 2017 10:12 pm

I was running both The Dude 6.39 and The Dude 6.40rc21 and I am getting:

std failure: not allowed (9)

This affects only RoS Devices, for The Dude trying to log in using winbox. It seems sometimes it works, other times it does not !

any ideas as to why this happening ?

Image
 
105547111
Member Candidate
Member Candidate
Posts: 132
Joined: Fri Jun 22, 2012 9:46 pm

Re: The Dude, v6.39rc test builds.

Sat Jul 01, 2017 10:09 pm

I'd like to see link downs being able to be monitored and logged on RoS devices. Right now there is none :(
 
aTan
Frequent Visitor
Frequent Visitor
Posts: 52
Joined: Tue Nov 01, 2011 11:55 am

Re: The Dude, v6.39rc test builds.

Fri Jul 28, 2017 10:51 am

No changes in 6.40?
 
JimmyNyholm
Member Candidate
Member Candidate
Posts: 249
Joined: Mon Apr 25, 2016 2:16 am
Location: Sweden

Re: The Dude, v6.39rc test builds.

Sat Jul 29, 2017 1:51 pm

joanllopart - I'm not sure about Cacti, but in RouterOS - graph is made from 5 min average data rate. What is polling interval in your Dude graph ?
We imported from 4.0beta3 where graphs has been working fine. I noticed issues with graphs maybe at 6.38. Now graphs ara wrong, specially when they are over 1Gbps, and doesn't get SNMP info from devices like Ubiquiti EdgeSwitch (different models). If you look at my previous post graphs, you'll see how Dude's graphs fail when we have more traffic.

Polling interval 1 minute
Polling timeout 10 seconds

We relay on dude to graph most of our network links, it's quite important they work as expected.
I have reported a similar issue under my previous account from my last job

http://forum.mikrotik.com/viewtopic.php ... 14#p519591

The issue got better once we backed our dude database with a flash array instead of spinning disks and seems to be better in recent builds, it is not entirely gone, a cursory glance shows some graph drops that don't correspond to any other drops upstream or downstream from the link as I would expect if it was real packet loss. I'm getting these issues from a variety of devices, none of the ubnt. I've even had it happen on MTik devices. I will gladly give any and all info required to help solve this issue but it is something that needs to be solved.
Graph isues are with any kind of device link, not just Ubnt. We are somehow used to those spikes. The problem we have with last versions is that it fails to graph properly when traffic is over 1Gbps. An example with two graphs on same interface, secod graph is the one that shows real traffic:

Graphed by Dude, SNMP polling on CCR1072:

Image

Graphed by CCR1072:

Image

Are you sure you using 64bit counters. that looks very much like wrapping numbers!?
 
autostoper76
Frequent Visitor
Frequent Visitor
Posts: 72
Joined: Sat Apr 14, 2012 12:13 pm
Location: Serbia- Belgrade
Contact:

Re: The Dude, v6.39rc test builds.

Fri Jul 20, 2018 5:03 pm

when will the new versions?
There is no improvement for a long time

6.39 === the latest version
https://wiki.mikrotik.com/wiki/Manual:T ... _changelog

Who is online

Users browsing this forum: No registered users and 10 guests