Community discussions

 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24157
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Newsletter 77

Wed Aug 02, 2017 1:40 pm

In this MikroTik newsletter:
  • new CRS317-1G-16S+RM with 16 x SFP+ cages, $399
  • new low cost small size 5GHz CPE SXTsq Lite5, only $46
  • new wAP LTE kit with 3G/4G/LTE modem, $119
  • new 6GHz long range DynaDish 6, $179
  • new long range LHG HP5 and LHG XL HP5, from $69
  • Traffic Generator tool
  • MUM 2017 schedule
Download the newsletter here:
http://mt.lv/news77
No answer to your question? How to write posts
 
User avatar
CyberTod
Long time Member
Long time Member
Posts: 511
Joined: Wed Jan 25, 2012 10:23 am

Re: Newsletter 77

Wed Aug 02, 2017 1:54 pm

LHG XL HP5 sounds like a very good low cost device.
 
User avatar
kometchtech
Member Candidate
Member Candidate
Posts: 194
Joined: Sat Jun 15, 2013 4:25 am
Location: Japan
Contact:

Re: Newsletter 77

Wed Aug 02, 2017 2:01 pm

new CRS317-1G-16S+RM with 16 x SFP+ cages, $399
Traffic Generator tool
MUM 2017 schedule
It is good information.

Three of the above are worrisome, maybe it will be interesting if you can come to Japan about LTE kit if possible?
--
Routerboard Users Group JP
http://www.rb-ug.jp/
CCR1009-8G-1S-1S+, RB750Gr3, CRS226-24G-2S+, RB850Gx2, RB960PGS, CRS317-1G-16S+,
RB2011UAS, CRS125-24G-1S, RB962UiGS-5HacT2HnT, CRS212-1G-10S-1S+, RB3011UiAS
 
infused
Member
Member
Posts: 305
Joined: Fri Dec 28, 2012 2:33 pm

Re: Newsletter 77

Wed Aug 02, 2017 2:18 pm

Redundant psu no hot swap... its 2017...
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24157
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Newsletter 77

Wed Aug 02, 2017 2:23 pm

Redundant psu no hot swap... its 2017...
No, it's actually just $399
No answer to your question? How to write posts
 
User avatar
eworm
Member
Member
Posts: 378
Joined: Wed Oct 22, 2014 9:23 am
Location: Oberhausen, Germany
Contact:

Re: Newsletter 77

Wed Aug 02, 2017 2:36 pm

Still no info about CRS328-24P-4S+RM...
Looks like we have to keep patient. :o
Manage RouterOS scripts and extend your devices' functionality: RouterOS Scripts
 
efaden
Forum Guru
Forum Guru
Posts: 1711
Joined: Sat Mar 30, 2013 1:55 am
Location: New York, USA

Re: Newsletter 77

Wed Aug 02, 2017 2:38 pm

Time frame for the 317? I need a switch with at least 4 SFP+ ports.

Sent from my Pixel XL using Tapatalk
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24157
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Newsletter 77

Wed Aug 02, 2017 3:23 pm

CRS317 is shipping soon.
No answer to your question? How to write posts
 
efaden
Forum Guru
Forum Guru
Posts: 1711
Joined: Sat Mar 30, 2013 1:55 am
Location: New York, USA

Re: Newsletter 77

Wed Aug 02, 2017 3:51 pm

I need that little 5 port SFP in sfp+... That would be awesome

Sent from my Pixel XL using Tapatalk
 
wwalcher
Frequent Visitor
Frequent Visitor
Posts: 72
Joined: Tue Jun 01, 2004 9:08 am
Contact:

Re: Newsletter 77

Wed Aug 02, 2017 5:12 pm

Is the 6Ghz product approved for use in the US?
 
cheeze
Member Candidate
Member Candidate
Posts: 146
Joined: Tue Jul 31, 2012 7:44 am

Re: Newsletter 77

Wed Aug 02, 2017 6:54 pm

"HW MPLS forwarding coming in future software update"

You have caught my attention.....REALLY caught my attention. Um.....do we have more information on this? Is this just for this switch? Any other devices? Please please?
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24157
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Newsletter 77

Thu Aug 03, 2017 8:22 am

Is the 6Ghz product approved for use in the US?
No, this is a licensed band in most countries, everyone needs to apply for a license first. It says so in the newsletter.
No answer to your question? How to write posts
 
pe1chl
Forum Guru
Forum Guru
Posts: 5729
Joined: Mon Jun 08, 2015 12:09 pm

Re: Newsletter 77

Thu Aug 03, 2017 11:10 am

Is the 6Ghz product approved for use in the US?
No, this is a licensed band in most countries, everyone needs to apply for a license first. It says so in the newsletter.
Now if there was a 10.0-10.5 GHz model, it would be nice for us radio amateurs :-)
(as we already have the license)
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24157
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Newsletter 77

Thu Aug 03, 2017 11:11 am

Newsletter has been updated to show more of the SXTsq
No answer to your question? How to write posts
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1815
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: Newsletter 77

Thu Aug 03, 2017 1:25 pm

Newsletter has been updated to show more of the SXTsq
Those comparison graphics between the SXT and SXTsq are great!
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
uj4n9
just joined
Posts: 1
Joined: Fri Aug 04, 2017 6:50 am

Re: Newsletter 77

Fri Aug 04, 2017 6:53 am

In this MikroTik newsletter:
  • new CRS317-1G-16S+RM with 16 x SFP+ cages, $399
How about Switching throughput?
 
pe1chl
Forum Guru
Forum Guru
Posts: 5729
Joined: Mon Jun 08, 2015 12:09 pm

Re: Newsletter 77

Fri Aug 04, 2017 10:55 am

How about Switching throughput?
Performance figures are, as usual, on the product page on the www.mikrotik.com website...
 
Trisc
Member Candidate
Member Candidate
Posts: 242
Joined: Sat May 29, 2004 11:24 pm
Location: Glos, UK

Re: Newsletter 77

Fri Aug 04, 2017 12:20 pm

SXTsq Lite5 - from the photos I can't see how it would be stable when mounting on a circular cross section pole using a hose clamp. There is no curved bracket like the old design that would stop it rotating. Not convinced.
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24157
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Newsletter 77

Fri Aug 04, 2017 12:46 pm

SXTsq Lite5 - from the photos I can't see how it would be stable when mounting on a circular cross section pole using a hose clamp. There is no curved bracket like the old design that would stop it rotating. Not convinced.
Not sure what you mean, there is a triangular wedge that sticks to the pole. To allow for free adjustment, we do offer separately a pole to flex adapter, the QuickMount pro:
small-qmp.jpg
You do not have the required permissions to view the files attached to this post.
No answer to your question? How to write posts
 
Trisc
Member Candidate
Member Candidate
Posts: 242
Joined: Sat May 29, 2004 11:24 pm
Location: Glos, UK

Re: Newsletter 77

Fri Aug 04, 2017 12:55 pm

That photo explains it much better thanks - you should include it on the product details . The recessed side mounting was not obvious to me.
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24157
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Newsletter 77

Fri Aug 04, 2017 1:03 pm

That photo explains it much better thanks - you should include it on the product details . The recessed side mounting was not obvious to me.
Already added to the product page.
No answer to your question? How to write posts
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24157
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Newsletter 77

Fri Aug 04, 2017 1:13 pm

No answer to your question? How to write posts
 
User avatar
saaremaa
Member Candidate
Member Candidate
Posts: 156
Joined: Tue Feb 02, 2010 7:48 pm
Location: Baltijos šalių miestas

Re: Newsletter 77

Fri Aug 04, 2017 2:23 pm

Does MikroTik plan to produce base stations in range of 6.1-6.4 GHz?
Client devices 6GHz produce, but there are no base stations.
Last edited by saaremaa on Fri Aug 04, 2017 2:42 pm, edited 1 time in total.
CMDR Saaremaa (Gutamaya Sierra Alpha Alpha)
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24157
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Newsletter 77

Fri Aug 04, 2017 2:29 pm

Not sure what is Microtics, but MikroTik has not yet revealed such plans.
No answer to your question? How to write posts
 
wwalcher
Frequent Visitor
Frequent Visitor
Posts: 72
Joined: Tue Jun 01, 2004 9:08 am
Contact:

Re: Newsletter 77

Tue Aug 08, 2017 5:09 pm

Is the 6Ghz product approved for use in the US?
No, this is a licensed band in most countries, everyone needs to apply for a license first. It says so in the newsletter.
I understand the need to obtain a license in the US, but I believe the hardware has to be approved by the FCC also. My question related to that. Has the FCC approved the DynaDish 6 for use in the US?
 
haik01
Member
Member
Posts: 406
Joined: Sat Mar 23, 2013 10:25 am
Location: Netherlands

Re: Newsletter 77

Tue Aug 08, 2017 6:00 pm

@Normis:

In the page you refer for the SXTsq Lite5, in the datasheet there is an error:

https://mikrotik.com/product/RBSXTsq5nD

The Antenna gain is expressed in dBd or dBi (mostly), and not in "no".
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24157
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Newsletter 77

Wed Aug 09, 2017 9:12 am

@Normis:

In the page you refer for the SXTsq Lite5, in the datasheet there is an error:

https://mikrotik.com/product/RBSXTsq5nD

The Antenna gain is expressed in dBd or dBi (mostly), and not in "no".
Fixed
No answer to your question? How to write posts
 
pe1chl
Forum Guru
Forum Guru
Posts: 5729
Joined: Mon Jun 08, 2015 12:09 pm

Re: Newsletter 77

Wed Aug 09, 2017 6:03 pm

@Normis:

In the page you refer for the SXTsq Lite5, in the datasheet there is an error:

https://mikrotik.com/product/RBSXTsq5nD

The Antenna gain is expressed in dBd or dBi (mostly), and not in "no".
Fixed
This problem (Antenna gain unit "no" or without unit) is present on multiple spec sheets on the website.
Better check them all...
 
didomir
just joined
Posts: 15
Joined: Tue Dec 22, 2015 9:45 pm

Re: Newsletter 77

Wed Aug 09, 2017 9:33 pm

Are there any information when we can order wAP LTE kit (and other new devices) in EU ?
In this MikroTik newsletter:
  • new CRS317-1G-16S+RM with 16 x SFP+ cages, $399
  • new low cost small size 5GHz CPE SXTsq Lite5, only $46
  • new wAP LTE kit with 3G/4G/LTE modem, $119
  • new 6GHz long range DynaDish 6, $179
  • new long range LHG HP5 and LHG XL HP5, from $69
  • Traffic Generator tool
  • MUM 2017 schedule
Download the newsletter here:
http://mt.lv/news77
Having fun with RB850Gx2,RB750Gr3,RB962UiGS-5HacT2HnT,RBmAP2nD,RB952Ui-5ac2nD,RB951G-2HnD,RB960PGS, RBMetalG-52SHPacn...
 
infused
Member
Member
Posts: 305
Joined: Fri Dec 28, 2012 2:33 pm

Re: Newsletter 77

Thu Aug 10, 2017 5:18 am

Redundant psu no hot swap... its 2017...
No, it's actually just $399
Look at the design of the Ubuquiti https://www.ubnt.com/edgemax/edgerouter-infinity/

See those back PSU modules? You had this on a couple of models, now you've gone back to joint modules? I'd be really happy to be wrong.

I think the design of Mikrtotik could be a lot better. You don't need to be the cheapest. Being cheap keeps your gear out of our DCs.
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24157
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Newsletter 77

Thu Aug 10, 2017 8:40 am

Redundant psu no hot swap... its 2017...
No, it's actually just $399
Look at the design of the Ubuquiti https://www.ubnt.com/edgemax/edgerouter-infinity/

See those back PSU modules? You had this on a couple of models, now you've gone back to joint modules? I'd be really happy to be wrong.

I think the design of Mikrtotik could be a lot better. You don't need to be the cheapest. Being cheap keeps your gear out of our DCs.
$399 vs $1,599.0
What are you asking really?
That we need to make a 1599$ device as well?
No answer to your question? How to write posts
 
cheeze
Member Candidate
Member Candidate
Posts: 146
Joined: Tue Jul 31, 2012 7:44 am

Re: Newsletter 77

Thu Aug 10, 2017 9:38 am

$399 vs $1,599.0
What are you asking really?
That we need to make a 1599$ device as well?
I personally don't think that's what is being asked.

I hate to prod and poke, but I see the MPLS forwarded via hardware in the future. Is that a far future thing? Like an ROS 7 thing? Or should we expect it before.

Also, is it only going to be for MPLS? Longest prefix match will not be hardware accelerated right?
 
infused
Member
Member
Posts: 305
Joined: Fri Dec 28, 2012 2:33 pm

Re: Newsletter 77

Fri Aug 11, 2017 1:25 am

Redundant psu no hot swap... its 2017...
No, it's actually just $399
Look at the design of the Ubuquiti https://www.ubnt.com/edgemax/edgerouter-infinity/

See those back PSU modules? You had this on a couple of models, now you've gone back to joint modules? I'd be really happy to be wrong.

I think the design of Mikrtotik could be a lot better. You don't need to be the cheapest. Being cheap keeps your gear out of our DCs.
$399 vs $1,599.0
What are you asking really?
That we need to make a 1599$ device as well?
I think you know quite well that's not what im saying. Adding a hot swap PSU is not going to quadruple the price of the switch.
You make great gear, but poor design choices IMO. You create 'carrier class' gear, without hotswap. It just doesn't work.
Maybe the answer is you do make some high end $1599 gear. You might be surprised how many people take it up. Your CCR's cost nearly $1500NZD and we have a lot of those.
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24157
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Newsletter 77

Fri Aug 11, 2017 9:44 am

Sorry, but prices don't work that way. Some parts are more expensive and complicated than others. Look at the price of a single PSU from our hot-swap rackmounts:
https://mikrotik.com/product/12pow150

That is only one of the two power supplies. The board itself has a lot of parts, the case is different etc.
No answer to your question? How to write posts
 
pe1chl
Forum Guru
Forum Guru
Posts: 5729
Joined: Mon Jun 08, 2015 12:09 pm

Re: Newsletter 77

Fri Aug 11, 2017 11:27 am

First everyone asks to use internal powersupplies instead of external powerbricks, and when it has been done
they ask for hotswap powersupplies :-)
Maybe go back to having external powerbricks supplying 24V to the unit, they can be hot swapped and even
can be replaced by other means of supplying 24V... (e.g. an isolated 48-to-24 V DC-DC converter)
 
User avatar
normis
MikroTik Support
MikroTik Support
Topic Author
Posts: 24157
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Newsletter 77

Fri Aug 11, 2017 11:36 am

In any case. Thanks for the suggestion, we will consider hot-swap dual power supplies for another model, most likely it will be higher price class.
No answer to your question? How to write posts
 
anuser
Member
Member
Posts: 392
Joined: Sat Nov 29, 2014 7:27 pm

Re: Newsletter 77

Fri Aug 11, 2017 1:11 pm

That we need to make a 1599$ device as well?
This one please: viewtopic.php?t=121533, but for 999$ :D
 
JimmyNyholm
Member Candidate
Member Candidate
Posts: 249
Joined: Mon Apr 25, 2016 2:16 am
Location: Sweden

Re: Newsletter 77

Sat Aug 12, 2017 2:06 pm

Still no info about CRS328-24P-4S+RM...
Looks like we have to keep patient. :o

Or what about CRS328-48S-4S+RM Need More Fiber ports with decent ratio on uplink.
1:1 as in 10s-1s+ is good but it's to expensive per port and takes up to much space with to little work done. 1U is expensive in telecom cabins.

Speaking of power over ethernet (not mt passive stuff) standards stuff there are more then many to chose from. But fiber (broadband to everyone) there is a vacume. Either all fiber only switches are to dumb, to expensive, to warm draw to much power....
Here Mikrotik have a gap to fill witch we who use mikrotik would love to see this would give us an edge over the others bringing better services faster at a more reasonable price.
 
AHA
just joined
Posts: 1
Joined: Tue Nov 15, 2016 8:38 am

Re: Newsletter 77

Mon Aug 14, 2017 12:46 pm

Still no info about CRS328-24P-4S+RM...
Looks like we have to keep patient. :o
I really Need to have more info about ( CRS328-24P-4S+RM ), what is the suggested price for distributors?, total Throughput, max users handling, ..etc.
Do you have a plan to produce a 16P-2S+ version , this will decrease the cost and offer more flexibility option from MT.
Also can we suggest some new feathers for this product like making it's default configuration as VLANs groups ?.
 
vacool
just joined
Posts: 9
Joined: Sat Sep 24, 2016 5:35 pm

Re: Newsletter 77

Tue Aug 22, 2017 2:54 pm

Any news about RB M33?
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1815
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: Newsletter 77

Wed Aug 23, 2017 1:21 am

In any case. Thanks for the suggestion, we will consider hot-swap dual power supplies for another model, most likely it will be higher price class.
It would be great to see all rack mount CCR's and CRS's have replaceable power supplies. Mikrotik could ship with either no PSU's installed, or a single AC PSU installed to keep the "sticker price" low.

This would mean Mikrotik products would be usable in a larger range of industries, e.g. we could use CRS317 or CRS328 in roadside cabinets with a -48volt PSU installed...
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA

Who is online

Users browsing this forum: No registered users and 3 guests