Community discussions

 
User avatar
sergejs
MikroTik Support
MikroTik Support
Topic Author
Posts: 6616
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

MikroTik News February 2018 (Issue #80)

Wed Jan 31, 2018 9:56 am

In this MikroTik newsletter:

* new hAP ac² Dual Band Desktop AP, $69
* new cAP ac Dual Band Wall/Ceiling AP, $69
* new CRS112-8P-4S-IN with eight PoE-out ports, $179
* new LHG XL 5 ac, Long Range 27dBi 5GHz with 802.11ac support, $99
* new LHG XL 2, Long Range 21dBi 2.4GHz, $68
* new LDF ac with 802.11ac and Gigabit Ethernet, $59
* LTE miniPCI-e cards, from $69
* wAP60G available in AP and CPE versions, from $99
* Match websites in firewall
* MUM schedule
* Train-the-Trainer course in Riga, Latvia

Download the newsletter here:
http://mt.lv/news80

MikroTik Team.
 
patrick7
Member Candidate
Member Candidate
Posts: 298
Joined: Sat Jul 20, 2013 2:40 pm

Re: MikroTik News February 2018 (Issue #80)

Wed Jan 31, 2018 10:11 am

RouterOS v7, how cool is that!
 
freemannnn
Long time Member
Long time Member
Posts: 669
Joined: Sun Oct 13, 2013 7:29 pm

Re: MikroTik News February 2018 (Issue #80)

Wed Jan 31, 2018 10:21 am

waiting for that 16 ports poe switch!
 
UMarcus
Frequent Visitor
Frequent Visitor
Posts: 91
Joined: Wed Jan 21, 2015 10:11 am
Location: Europe

Re: MikroTik News February 2018 (Issue #80)

Wed Jan 31, 2018 10:30 am

..
* new hAP ac² Dual Band Desktop AP, $69
...

Does this device provide more real WLAN throughput as the hAP ac (i saw never more than ~130MBit even if i had a 866MBit WIFI 5GHz connection) ?
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Topic Author
Posts: 6616
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: MikroTik News February 2018 (Issue #80)

Wed Jan 31, 2018 10:38 am

Umarcus,
wireless throughput strongly depends on client wireless interface (1chain/2chain/3chain/etc.).
hAP AC and modern macbook may reach ~600-700Mbps, hAP AC to hAP AC ~700Mbps of _real_ throughput.
 
blingblouw
Member Candidate
Member Candidate
Posts: 273
Joined: Wed Aug 25, 2010 9:43 am

Re: MikroTik News February 2018 (Issue #80)

Wed Jan 31, 2018 10:52 am

So its my understanding that the new hap ac has wave 2 support?

Does that mean that the driver does as well? i.e. does it support all features of wave2 already or will that come at a later stage? Can the AP transmit to multiple clients on different spatial streams simultaneously?
 
deanMKD1
Member
Member
Posts: 350
Joined: Fri Dec 12, 2014 12:06 am
Location: Macedonia
Contact:

Re: MikroTik News February 2018 (Issue #80)

Wed Jan 31, 2018 11:08 am

@sergejs
is HAP ac 2 have the same 1000mW radio as previous HAP ac? i dont see output power in details.
 
UMarcus
Frequent Visitor
Frequent Visitor
Posts: 91
Joined: Wed Jan 21, 2015 10:11 am
Location: Europe

Re: MikroTik News February 2018 (Issue #80)

Wed Jan 31, 2018 11:23 am

Umarcus,
wireless throughput strongly depends on client wireless interface (1chain/2chain/3chain/etc.).
hAP AC and modern macbook may reach ~600-700Mbps, hAP AC to hAP AC ~700Mbps of _real_ throughput.
Ok. May be it also depend on the CAPsMAN configuration ? If yes what are the most limit factor ? The CAPsMAN (in my case CRS124) or the CAP (in my case hAP AC) ?

My phone are able to transfer more than 130MBit for sure, I saw this while connected to an AcccesPoint of other Vendor in the same Network. It reports 5GHz / 866MBit WLAN connection in both cases, but in the end the hAP AC only gave a throughput of ~130MBit.
 
User avatar
soulflyhigh
Member Candidate
Member Candidate
Posts: 173
Joined: Wed Sep 08, 2010 11:20 am

Re: MikroTik News February 2018 (Issue #80)

Wed Jan 31, 2018 11:26 am

waiting for that 16 ports poe switch!
+1
MTCRE, MTCTCE
 
dadaniel
Member Candidate
Member Candidate
Posts: 158
Joined: Fri May 14, 2010 11:51 pm

Re: MikroTik News February 2018 (Issue #80)

Wed Jan 31, 2018 12:28 pm

* Match websites in firewall
What about matching non-secure traffic with wildcards directly in firewall? Still not possible?
 
uldis
MikroTik Support
MikroTik Support
Posts: 3426
Joined: Mon May 31, 2004 2:55 pm

Re: MikroTik News February 2018 (Issue #80)

Wed Jan 31, 2018 1:08 pm

So its my understanding that the new hap ac has wave 2 support?

Does that mean that the driver does as well? i.e. does it support all features of wave2 already or will that come at a later stage? Can the AP transmit to multiple clients on different spatial streams simultaneously?
Currently we don't have support for the wave2 features in the software for this board.
 
deanMKD1
Member
Member
Posts: 350
Joined: Fri Dec 12, 2014 12:06 am
Location: Macedonia
Contact:

Re: MikroTik News February 2018 (Issue #80)

Wed Jan 31, 2018 2:40 pm

@uldis can you answer on my previous question pls ?
 
User avatar
pietroscherer
Trainer
Trainer
Posts: 170
Joined: Thu Mar 05, 2015 3:05 pm
Location: RS, Brazil
Contact:

Re: MikroTik News February 2018 (Issue #80)

Wed Jan 31, 2018 3:39 pm

Hello,

Static link aggregation on CRS112-8P-4S-IN refers to non switch mode, correct?

Thank you.
Pietro Scherer
http://www.tchesolutions.com.br [ISPs Consulting and Training]
http://www.routermage.com [Backup and Automation System]
:D
 
User avatar
AlainCasault
Trainer
Trainer
Posts: 624
Joined: Fri Apr 30, 2010 3:25 pm
Location: Laval, QC, Canada
Contact:

Re: MikroTik News February 2018 (Issue #80)

Wed Jan 31, 2018 3:50 pm

waiting for that 16 ports poe switch!
+1
___________________________
Alain Casault, Eng.
If I helped you, let me know!
 
User avatar
macsrwe
Long time Member
Long time Member
Posts: 655
Joined: Mon Apr 02, 2007 5:43 am
Location: Arizona, USA
Contact:

Re: MikroTik News February 2018 (Issue #80)

Wed Jan 31, 2018 5:05 pm

Love the POE switch. Is it really that much additional engineering expense to offer an additional version of these devices in a weatherproof case like the PowerBox? Do you believe there is no market? Outdoor equipment is the norm where we are.
 
Beone
Member Candidate
Member Candidate
Posts: 243
Joined: Fri Feb 11, 2011 1:11 pm

Re: MikroTik News February 2018 (Issue #80)

Wed Jan 31, 2018 7:30 pm

only 2x2 chains? (hap ac and wap ac have 3x3 on 5ghz)

Would love a 3x3 2ghz and 5ghz design including PoE 802.3at/af support design! Stable Enterprise switches just don't do passive-poe 24V and is a nightmare to configure (shorts if you don't watch out)
 
mistry7
Forum Guru
Forum Guru
Posts: 1330
Joined: Tue Oct 13, 2009 11:57 am
Location: Germany

Re: MikroTik News February 2018 (Issue #80)

Wed Jan 31, 2018 11:52 pm

RouterOS v7, how cool is that!
Did you see something I missed?
 
jo2jo
Forum Veteran
Forum Veteran
Posts: 958
Joined: Fri May 26, 2006 1:25 am

Re: MikroTik News February 2018 (Issue #80)

Thu Feb 01, 2018 6:19 am

..
* new hAP ac² Dual Band Desktop AP, $69
...

Does this device provide more real WLAN throughput as the hAP ac (i saw never more than ~130MBit even if i had a 866MBit WIFI 5GHz connection) ?

See this post: viewtopic.php?f=7&t=113830

Im seeing same max speed issues (on hapAC, wAP ac) , with EXTENSIVE testings (and side-by-side comparisons, in varied environments, to other mfg 3x3 5g ac products ).

I do find it very interesting that the new AC capable APs announced today (feb 18 newsletter) are v2 of the product line, yet are 2x2 chain (when v1 of the product line was 3x3 chains). Yet the v1 products act almost exactly as if 1 of the 3 chains is not working (or is malfunctioning) (at 2.4 and more so at 5g ac).

Dont get me wrong please, Im fully aware of (and use) the power of RouterOS (its un-matched at any price point), but there is a real issue with 3 chain 5g AC on these products.

On a different note, on the newly announced CRS112-8P-4S-IN (new 8 port POE SW !), can you use 24v AND 48v POE at the same time (ie like on the ubnt edgeswitch line)?, ie on the CRS112-8P-4S-IN , can you attach BOTH 24v and 48v PSU inputs and then have some ports @ 24v passive, and some eth ports @ poe at/af ? (on many installs ive had to put 2x 960PGS (hexPOE) rb's next to each other due to needing more than 4x POE ports, or needing 24v on some eth ports (ie other MTs) , and poe on other eths (ie IPcams).

thanks!
(i love it when my inbox shows a new MT newsletter pdf!)
:beep :beep :beep
 
UMarcus
Frequent Visitor
Frequent Visitor
Posts: 91
Joined: Wed Jan 21, 2015 10:11 am
Location: Europe

Re: MikroTik News February 2018 (Issue #80)

Thu Feb 01, 2018 9:49 am

..
* new hAP ac² Dual Band Desktop AP, $69
...

Does this device provide more real WLAN throughput as the hAP ac (i saw never more than ~130MBit even if i had a 866MBit WIFI 5GHz connection) ?

See this post: viewtopic.php?f=7&t=113830

Im seeing same max speed issues (on hapAC, wAP ac) , with EXTENSIVE testings (and side-by-side comparisons, in varied environments, to other mfg 3x3 5g ac products ).

...
Thank you for that hint. Exactly same issue here. Hopefully MT could solve that issue. Regards.
 
JimmyNyholm
Member Candidate
Member Candidate
Posts: 249
Joined: Mon Apr 25, 2016 2:16 am
Location: Sweden

Re: MikroTik News February 2018 (Issue #80)

Thu Feb 01, 2018 12:00 pm

RouterOS v7, how cool is that!
The what and where now? Nothing that I see in that Issue mentions V7???
 
anuser
Member
Member
Posts: 406
Joined: Sat Nov 29, 2014 7:27 pm

Re: MikroTik News February 2018 (Issue #80)

Thu Feb 01, 2018 11:42 pm

Ok. May be it also depend on the CAPsMAN configuration ? If yes what are the most limit factor ? The CAPsMAN (in my case CRS124) or the CAP (in my case hAP AC) ?
In CAPSMAN setup with CAPSMAN forwarding enabled the CAP creates a tunnel to the CAPSMAN controller. This needs CPU power. With CAP AC with its 4 cores I expect higher throughput.
including PoE 802.3at/af support design! Stable Enterprise switches just don't do passive-poe 24V and is a nightmare to configure (shorts if you don't watch out)
CAP AC can be powered by 802.3at/803.3af - Did I miss something?
 
Spirch
newbie
Posts: 44
Joined: Sat May 03, 2014 5:04 am

Re: MikroTik News February 2018 (Issue #80)

Fri Feb 02, 2018 3:29 am

availability in Canada for

* new hAP ac² Dual Band Desktop AP, $69
* new cAP ac Dual Band Wall/Ceiling AP, $69

???
 
borkbork
just joined
Posts: 4
Joined: Fri Jan 26, 2018 11:47 pm

Re: MikroTik News February 2018 (Issue #80)

Fri Feb 02, 2018 5:32 am

Ok. May be it also depend on the CAPsMAN configuration ? If yes what are the most limit factor ? The CAPsMAN (in my case CRS124) or the CAP (in my case hAP AC) ?
In CAPSMAN setup with CAPSMAN forwarding enabled the CAP creates a tunnel to the CAPSMAN controller. This needs CPU power. With CAP AC with its 4 cores I expect higher throughput.
including PoE 802.3at/af support design! Stable Enterprise switches just don't do passive-poe 24V and is a nightmare to configure (shorts if you don't watch out)
CAP AC can be powered by 802.3at/803.3af - Did I miss something?
hAP ac2 is passive POE in, that's what disappointed me. I need those extra Gb ports, but all my infrastructure is 802.3af/at based. Not looking forward to the extra mess.
 
anuser
Member
Member
Posts: 406
Joined: Sat Nov 29, 2014 7:27 pm

Re: MikroTik News February 2018 (Issue #80)

Fri Feb 02, 2018 10:14 pm

hAP ac2 is passive POE in, that's what disappointed me. I need those extra Gb ports, but all my infrastructure is 802.3af/at based. Not looking forward to the extra mess.

Well CAP ac has dual "PoE in" support and that is the device you actually want in an enterprise environment. 1 port in, one additional port for another access point (HAP AC lite) powered by the CAP AC.
https://mikrotik.com/product/cap_ac
PoE in 	802.3af/at


Number of DC inputs 	1 (PoE-IN)
 
R1CH
Forum Veteran
Forum Veteran
Posts: 905
Joined: Sun Oct 01, 2006 11:44 pm

Re: MikroTik News February 2018 (Issue #80)

Sat Feb 03, 2018 12:47 am

So its my understanding that the new hap ac has wave 2 support?

Does that mean that the driver does as well? i.e. does it support all features of wave2 already or will that come at a later stage? Can the AP transmit to multiple clients on different spatial streams simultaneously?
Currently we don't have support for the wave2 features in the software for this board.
Is this support planned? All the Qualcomm SOCs these days are Wave2, it would be great if the software could support such features as client devices like cell phones have had Wave2 support for a long time as they're almost all using Qualcomm chips too.
 
feris
just joined
Posts: 11
Joined: Tue May 16, 2017 3:58 pm

Re: MikroTik News February 2018 (Issue #80)

Sat Feb 03, 2018 1:57 pm

Nice new products, but honestly there's too many those small =<5 ports routers models.
RB2011 definitely needs refresh. HeX and such are very capable but most of sites I operate needs more than 4 and less than 9 ports for LAN.
There is also lots of problems with LTE over USB modems.
Well RBM11G with 10 GE ports,usb,case,serial port and optional kit with R11e-LTE is my dream site router.
 
darkprocess
Member Candidate
Member Candidate
Posts: 253
Joined: Fri Mar 20, 2015 1:16 pm

Re: MikroTik News February 2018 (Issue #80)

Sat Feb 03, 2018 3:09 pm

When wil Ltap and ltap mini be available?
 
sid5632
Member
Member
Posts: 353
Joined: Fri Feb 17, 2017 6:05 pm

Re: MikroTik News February 2018 (Issue #80)

Sat Feb 03, 2018 3:24 pm

Nice new products, but honestly there's too many those small =<5 ports routers models.
HeX and such are very capable but most of sites I operate needs more than 4 and less than 9 ports for LAN.
Yes, I want an 8 port switch with decent routing capabilities too. Small CRS is not up to it.
 
User avatar
pcunite
Forum Veteran
Forum Veteran
Posts: 945
Joined: Sat May 25, 2013 5:13 am
Location: USA

Re: MikroTik News February 2018 (Issue #80)

Sat Feb 03, 2018 10:36 pm

Excellent news on the PoE switch! Nice work, MikroTik. I have a 28 IP network camera installation coming up in May of this year. Could really use a rackmount 24 port PoE switch too!
 
purplecloud
just joined
Posts: 7
Joined: Tue Jan 30, 2018 3:29 pm
Location: Europe
Contact:

Re: MikroTik News February 2018 (Issue #80)

Sun Feb 04, 2018 12:29 am

RouterOS v7, how cool is that!
The what and where now? Nothing that I see in that Issue mentions V7???
I think it was a mistake...
"To be happy in this world, first you need a cell phone and then you need an airplane. Then you're truly wireless." Ted Turner

Support Team @MyHub
 
raffav
Member Candidate
Member Candidate
Posts: 289
Joined: Wed Oct 24, 2012 4:40 am

Re: MikroTik News February 2018 (Issue #80)

Sun Feb 04, 2018 12:54 am

RouterOS v7, how cool is that!
The what and where now? Nothing that I see in that Issue mentions V7???
I think it was a mistake...
I think he was joking about that.

Enviado de meu XT1580 usando Tapatalk

 
User avatar
eworm
Member
Member
Posts: 407
Joined: Wed Oct 22, 2014 9:23 am
Location: Oberhausen, Germany
Contact:

Re: MikroTik News February 2018 (Issue #80)

Sun Feb 04, 2018 12:12 pm

Excellent news on the PoE switch! Nice work, MikroTik. I have a 28 IP network camera installation coming up in May of this year. Could really use a rackmount 24 port PoE switch too!
Me too. Sadly CRS328-24P-4S+RM is not announced officially.
Manage RouterOS scripts and extend your devices' functionality: RouterOS Scripts
 
peper
Frequent Visitor
Frequent Visitor
Posts: 51
Joined: Tue Sep 11, 2012 8:45 pm

Re: MikroTik News February 2018 (Issue #80)

Sun Feb 04, 2018 11:29 pm

Nice new products, but honestly there's too many those small =<5 ports routers models.
RB2011 definitely needs refresh. HeX and such are very capable but most of sites I operate needs more than 4 and less than 9 ports for LAN.
You are so right
 
deanMKD1
Member
Member
Posts: 350
Joined: Fri Dec 12, 2014 12:06 am
Location: Macedonia
Contact:

Re: MikroTik News February 2018 (Issue #80)

Mon Feb 05, 2018 12:27 am

Availability for this new products?
 
feris
just joined
Posts: 11
Joined: Tue May 16, 2017 3:58 pm

Re: MikroTik News February 2018 (Issue #80)

Mon Feb 05, 2018 5:06 pm

Is there a chance for hAP ac2 with classic case ?
 
marekm
Member Candidate
Member Candidate
Posts: 209
Joined: Tue Feb 01, 2011 11:27 pm

Re: MikroTik News February 2018 (Issue #80)

Mon Feb 05, 2018 9:17 pm

Question about the CRS112-8P-4S-IN: does it support -48V DC telecom power with positive ground?
 
Beone
Member Candidate
Member Candidate
Posts: 243
Joined: Fri Feb 11, 2011 1:11 pm

Re: MikroTik News February 2018 (Issue #80)

Tue Feb 06, 2018 5:14 pm

Ok. May be it also depend on the CAPsMAN configuration ? If yes what are the most limit factor ? The CAPsMAN (in my case CRS124) or the CAP (in my case hAP AC) ?
In CAPSMAN setup with CAPSMAN forwarding enabled the CAP creates a tunnel to the CAPSMAN controller. This needs CPU power. With CAP AC with its 4 cores I expect higher throughput.
including PoE 802.3at/af support design! Stable Enterprise switches just don't do passive-poe 24V and is a nightmare to configure (shorts if you don't watch out)
CAP AC can be powered by 802.3at/803.3af - Did I miss something?
CAP AC does, but the hap ac2 doesnt
 
jarda
Forum Guru
Forum Guru
Posts: 7604
Joined: Mon Oct 22, 2012 4:46 pm

Re: MikroTik News February 2018 (Issue #80)

Wed Feb 07, 2018 10:34 am

Can we see hap ac2 with at least 10 gigabit ethernets and microSD card slot?
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24277
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: MikroTik News February 2018 (Issue #80)

Wed Feb 07, 2018 10:42 am

Can we see hap ac2 with at least 10 gigabit ethernets and microSD card slot?
That's a different product that is coming soon.
No answer to your question? How to write posts
 
jarda
Forum Guru
Forum Guru
Posts: 7604
Joined: Mon Oct 22, 2012 4:46 pm

Re: MikroTik News February 2018 (Issue #80)

Wed Feb 07, 2018 1:00 pm

Thanks. When soon and what are the specifications of it?
 
iwikus
just joined
Posts: 23
Joined: Sat Jun 16, 2007 9:55 am

Re: MikroTik News February 2018 (Issue #80)

Wed Feb 07, 2018 1:08 pm

Thanks. When soon and what are the specifications of it?
Oooh, I would like to see something with 2.5GBASE-T and 5GBASE-T https://en.wikipedia.org/wiki/2.5GBASE-T_and_5GBASE-T
 
JimmyNyholm
Member Candidate
Member Candidate
Posts: 249
Joined: Mon Apr 25, 2016 2:16 am
Location: Sweden

Re: MikroTik News February 2018 (Issue #80)

Wed Feb 07, 2018 2:04 pm

Excellent news on the PoE switch! Nice work, MikroTik. I have a 28 IP network camera installation coming up in May of this year. Could really use a rackmount 24 port PoE switch too!
And while youre at 24port powe why not 48port poe.
48 Gig ports with 1 qsfp+ port breakable to 4 sfp+ ports
 
vladimirslk
Member Candidate
Member Candidate
Posts: 109
Joined: Wed Feb 10, 2010 2:03 am
Location: Estonia, Tallinn
Contact:

Re: MikroTik News February 2018 (Issue #80)

Wed Feb 07, 2018 4:54 pm

I was expecting 60ghz for 1km
it should not be a deal to make it with parabola, cut feeder on jirious 24, direct WAP to hole of feeder, profit. dont want to recall 2005 when we made wireless out of cans and other stuff, cause inventors were too lazy to make ready product
 
neutronlaser
Member Candidate
Member Candidate
Posts: 212
Joined: Thu Jan 18, 2018 5:18 pm

Re: MikroTik News February 2018 (Issue #80)

Thu Feb 08, 2018 9:54 pm

When is the HAP AC2 available in the USA?
 
Sribala44ji
just joined
Posts: 3
Joined: Fri Jan 22, 2016 9:30 pm

Re: MikroTik News February 2018 (Issue #80)

Fri Feb 09, 2018 11:56 am

Will there be a long range 60ghz ptp device
 
bisto
just joined
Posts: 5
Joined: Thu Dec 18, 2014 2:51 am

Re: MikroTik News February 2018 (Issue #80)

Mon Feb 12, 2018 2:09 pm

Excellent news on the PoE switch! Nice work, MikroTik. I have a 28 IP network camera installation coming up in May of this year. Could really use a rackmount 24 port PoE switch too!
Me too. Sadly CRS328-24P-4S+RM is not announced officially.
Correct me if I'm wrong, but was this not announced at the 2017 MUM EU? Some distributors got their hands on these last september I read somewhere and we eagerly anticipate them ! They had a slot on the switches page in the hardware section of the website with an R.R.P. attached but these have disapeared.
 
neutronlaser
Member Candidate
Member Candidate
Posts: 212
Joined: Thu Jan 18, 2018 5:18 pm

Re: MikroTik News February 2018 (Issue #80)

Mon Feb 12, 2018 2:53 pm

Such a shame. I would have bought dozens of CRS328-24P-4S+RM if they ever existed. I think this was the presentation:

https://mum.mikrotik.com/presentations/ ... 580163.pdf
 
pamribeirox
just joined
Posts: 10
Joined: Fri Dec 22, 2017 6:20 pm

CRS328-24P-4S+RM is finally available

Wed Feb 21, 2018 1:53 pm

I've received information from our main Mikrotik supplier that CRS328 (24 PoE AF/AT) is already in production/sales.

The supplied product flyer doesn't mention the L2 IPv6 support capabilities, of course the L3 functions will be available as in other RouterOS products, but, does de equipment (and the others in the CRS line) support:

* MLD snooping/filtering?
* Filtering ICMPv6 Router Advertisements arriving on the user/edge ports? (RA guard)

I'm also waiting for a simple IPv6 ND enhancement in RouterOS, the ability to define the router priority (RFC5175/RFC4191) as HIGH/MEDIUM/LOW in multiple gateway topologies.

regards.
 
skullzaflare
just joined
Posts: 21
Joined: Tue Apr 12, 2016 12:01 am

Re: MikroTik News February 2018 (Issue #80)

Wed Feb 21, 2018 4:21 pm

So its my understanding that the new hap ac has wave 2 support?

Does that mean that the driver does as well? i.e. does it support all features of wave2 already or will that come at a later stage? Can the AP transmit to multiple clients on different spatial streams simultaneously?
Currently we don't have support for the wave2 features in the software for this board.
What are the plans on adding support?
I ordered two cAP AC's which are now installed, and a hAP ac² to replace my 962. I was hoping to see the wave2 to pop in with my intel 9260 wireless cards, however everything is maxing at 866mbps connection
 
User avatar
pcunite
Forum Veteran
Forum Veteran
Posts: 945
Joined: Sat May 25, 2013 5:13 am
Location: USA

Re: CRS328-24P-4S+RM is finally available

Wed Feb 21, 2018 7:34 pm

I've received information from our main Mikrotik supplier that CRS328 (24 PoE AF/AT) is already in production/sales.

Excellent, really looking forward to the CRS328-24P-4S+RM.
 
jhqm67
just joined
Posts: 1
Joined: Thu Feb 22, 2018 1:52 pm
Location: Argentina

Re: MikroTik News February 2018 (Issue #80)

Mon Feb 26, 2018 9:56 pm

Hello, I bought an RB3011 router.
I own two WAN connections with public IP and fixed optical fiber.
I would need a basic configuration for my RB3011 where I can route the outbound traffic of my LAN for one of the two WANs and the incoming traffic to local servers for the other WAN.
I thank whoever can indicate me or redirect me towards the solution.

Thank you so much!!
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24277
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: MikroTik News February 2018 (Issue #80)

Tue Feb 27, 2018 9:01 am

Hello, I bought an RB3011 router.
I own two WAN connections with public IP and fixed optical fiber.
I would need a basic configuration for my RB3011 where I can route the outbound traffic of my LAN for one of the two WANs and the incoming traffic to local servers for the other WAN.
I thank whoever can indicate me or redirect me towards the solution.

Thank you so much!!
Please post a new question in the appropriate category. Why are you commenting on the Newsletter topic?
No answer to your question? How to write posts
 
deanMKD1
Member
Member
Posts: 350
Joined: Fri Dec 12, 2014 12:06 am
Location: Macedonia
Contact:

Re: MikroTik News February 2018 (Issue #80)

Tue Feb 27, 2018 11:20 pm

Did someone get some unit from HAC AC 2? Some real tests?
 
Beone
Member Candidate
Member Candidate
Posts: 243
Joined: Fri Feb 11, 2011 1:11 pm

Re: MikroTik News February 2018 (Issue #80)

Wed Feb 28, 2018 1:27 am

Why routeros devices like powerbox pro, hex poe, hap ac2 only have 16Mb flash?

With basic install, there is less then 1mb free space, trying to run a hotspot on it with just a little bit of html/img pages will run the device completely out of flash memory.

RB951xxx had 128Mb flash, flash is cheap these days, why not just a little bit more like 32Mb, 64Mb or even 128MB ram? Even CCR with 2 partitions (master/recovery) will run out 128Mb flash easily during upgrade for example
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24277
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: MikroTik News February 2018 (Issue #80)

Wed Feb 28, 2018 9:03 am

trying to run a hotspot on it with just a little bit of html/img pages will run the device completely out of flash memory.
these are home routers, not really ideal for a complicated hotspot server and custom login pages.
for those devices that have a USB port or microSD slot, you can put the Hotspot directory there.
No answer to your question? How to write posts
 
User avatar
eworm
Member
Member
Posts: 407
Joined: Wed Oct 22, 2014 9:23 am
Location: Oberhausen, Germany
Contact:

Re: MikroTik News February 2018 (Issue #80)

Wed Feb 28, 2018 11:00 am

For now I am fine with 16MB flash storage. In case RouterOS v7 will ever be available I hope my universal toolbox (mAP that travels with me) will be able to run all the features with current releases.
Manage RouterOS scripts and extend your devices' functionality: RouterOS Scripts
 
MPedreseo
just joined
Posts: 1
Joined: Wed Feb 28, 2018 2:01 pm
Location: Barcelona
Contact:

Re: MikroTik News February 2018 (Issue #80)

Wed Feb 28, 2018 2:18 pm

waiting for that 16 ports poe switch!
+1
+1 too!!
 
Taggart
just joined
Posts: 5
Joined: Wed Feb 28, 2018 7:55 am

Re: MikroTik News February 2018 (Issue #80)

Wed Feb 28, 2018 2:50 pm

new hAP ac² Dual Band Desktop AP
good choice
 
neutronlaser
Member Candidate
Member Candidate
Posts: 212
Joined: Thu Jan 18, 2018 5:18 pm

Re: MikroTik News February 2018 (Issue #80)

Wed Feb 28, 2018 3:10 pm

Waiting for HAP AC 2 to be in stock on Amazon USA, hopefully next month.
 
skullzaflare
just joined
Posts: 21
Joined: Tue Apr 12, 2016 12:01 am

Re: MikroTik News February 2018 (Issue #80)

Wed Feb 28, 2018 6:16 pm

new hAP ac² Dual Band Desktop AP
good choice
I ordered one to replace a 962, our vender said they expect to have them around the end of march.
I am unhappy that Mikrotik has no support for any of the wave2 features however, and that i cant get a answer as to if you plan to add the features support or not
 
User avatar
macsrwe
Long time Member
Long time Member
Posts: 655
Joined: Mon Apr 02, 2007 5:43 am
Location: Arizona, USA
Contact:

Re: MikroTik News February 2018 (Issue #80)

Tue Mar 20, 2018 12:49 am

Love the POE switch. Is it really that much additional engineering expense to offer an additional version of these devices in a weatherproof case like the PowerBox? Do you believe there is no market? Outdoor equipment is the norm where we are.
I see UBNT announced an outdoor weatherproof gigabit NanoSwitch today. Looks like I may be introducing my first model of non-MT equipment into my network. Didn't really want to do this.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24277
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: MikroTik News February 2018 (Issue #80)

Tue Mar 20, 2018 9:23 am

Love the POE switch. Is it really that much additional engineering expense to offer an additional version of these devices in a weatherproof case like the PowerBox? Do you believe there is no market? Outdoor equipment is the norm where we are.
I see UBNT announced an outdoor weatherproof gigabit NanoSwitch today. Looks like I may be introducing my first model of non-MT equipment into my network. Didn't really want to do this.
How is this different from PowerBOX Pro? https://mikrotik.com/product/RB960PGS-PB
Just that it's specifically a switch?
No answer to your question? How to write posts
 
User avatar
macsrwe
Long time Member
Long time Member
Posts: 655
Joined: Mon Apr 02, 2007 5:43 am
Location: Arizona, USA
Contact:

Re: MikroTik News February 2018 (Issue #80)

Fri Mar 23, 2018 1:46 am

Love the POE switch. Is it really that much additional engineering expense to offer an additional version of these devices in a weatherproof case like the PowerBox? Do you believe there is no market? Outdoor equipment is the norm where we are.
I see UBNT announced an outdoor weatherproof gigabit NanoSwitch today. Looks like I may be introducing my first model of non-MT equipment into my network. Didn't really want to do this.
How is this different from PowerBOX Pro? https://mikrotik.com/product/RB960PGS-PB
Just that it's specifically a switch?
I realize I can use a PB Pro as an outdoor gig switch if I am forced. But the advantage of not using a $100 router in places where I need a $40 POE switch should speak for itself. (Yes, I realize the switch in this newsletter is $180, but it's eight ports, for I would have to buy two PB Pros.) I suspect MT could put out a four-port weatherproof POE switch at nearly the same price point as UBNT.
 
User avatar
juliokato
Member Candidate
Member Candidate
Posts: 229
Joined: Mon Oct 26, 2015 4:27 pm
Location: Brazil

Re: MikroTik News February 2018 (Issue #80)

Fri Mar 23, 2018 2:25 am

I agree. PB is not IP certificate.
I apologize my grammatical errors, my english not so good, I am not a native speaker.
Wiki is maintained in English. I use Google translator. 8)
 
andriys
Forum Guru
Forum Guru
Posts: 1187
Joined: Thu Nov 24, 2011 1:59 pm
Location: Kharkiv, Ukraine

Re: MikroTik News February 2018 (Issue #80)

Sun Mar 25, 2018 3:04 pm

I suspect MT could put out a four-port weatherproof POE switch at nearly the same price point as UBNT.
PowerBox Pro is essentially the RB960PGS (hEX PoE) board in an outdoor/weatherproof case. And the former is $20 more expensive ($99) than the latter ($79). Now it appears that a switch similar to PowerBox Pro router would be the RB260GSP ($55.95) in a weatherproof case and with the expected price tag of $55.95+$20=$75.95. I.e. much closer to the PowerBox Pro than to the UBNT offering.
 
User avatar
juliokato
Member Candidate
Member Candidate
Posts: 229
Joined: Mon Oct 26, 2015 4:27 pm
Location: Brazil

Re: MikroTik News February 2018 (Issue #80)

Mon Apr 09, 2018 8:45 pm

When wil Ltap and ltap mini be available?
Is the product not in the product list?
https://mikrotik.com/product/ (not found)
https://www.balticnetworks.com/docs/Mik ... lte_ds.pdf
I apologize my grammatical errors, my english not so good, I am not a native speaker.
Wiki is maintained in English. I use Google translator. 8)

Who is online

Users browsing this forum: No registered users and 9 guests