Community discussions

 
onlineuser
Member Candidate
Member Candidate
Posts: 211
Joined: Thu Aug 06, 2015 12:10 pm

Re: v6.41.1 [current]

Thu Feb 08, 2018 7:48 pm

onlineuser - It might affect your situation, however, we can not give you precise yes or no answer. If the problem that you have is caused by delayed/slow responses to/from OVPN server, then this might help and your problem might go away;
It looks good. At the first connection establishment the connection will be established. :-)
Another feature would be that when there are more than one outgoing ovpn client only one by one connection will be established - this would be better for the CPU when 4k keys will be used on slower devices.
 
User avatar
docmarius
Forum Guru
Forum Guru
Posts: 1205
Joined: Sat Nov 06, 2010 12:04 pm
Location: Timisoara, Romania
Contact:

Re: v6.41.1 [current]

Thu Feb 08, 2018 8:48 pm

I can confirm the DHCP behavior described by Splash.
Having a DHCP server on a (SW only - CCR1009) bridge interface stops the DHCP server from handing out leases, with all just in the waiting state.
Adding accept firewall rules for UDP port 67 on the input chain for the needed interfaces gets it up and running.
Torturing CCR1009-7G-1C-1S+, RB450G, RB750GL, RB951G-2HnD, RB960PGS, RB260GSP, OmniTIK 5HnD and NetMetal 922UAGS-5HPacD + R11e-5HnD in my home network.
 
User avatar
macsrwe
Long time Member
Long time Member
Posts: 633
Joined: Mon Apr 02, 2007 5:43 am
Location: Arizona, USA
Contact:

Re: v6.41.1 [current]

Fri Feb 09, 2018 1:35 am

After update 6.41.1 my RB951Ui 2HnD has alway reboot, and i cant winbox to interface address. How can I fix this?
Can you winbox to MAC address?
 
khaverblad
newbie
Posts: 34
Joined: Sat Mar 08, 2014 12:32 am
Location: Sweden
Contact:

Re: v6.41.1 [current]

Fri Feb 09, 2018 12:05 pm

In general since the Master/Slave port concept is gone, does this also mean that one is stuck wiht the existing Master/Slave configuration from the past? Meaning, I noticed when I was trying to setup a fw filter rule for ether6 (using RB3011) I got an error message saying that the port was setup as slave and not master so it wasn't possible. How do one solve this?
--
Member of Mikrotik Sweden Telegram Group
 
DVMi
just joined
Posts: 4
Joined: Mon Sep 12, 2016 1:07 pm

Re: v6.41.1 [current]

Fri Feb 09, 2018 12:08 pm

Notice for those, how are using hotspot with custom pages.

After update from 6.41 to 6.41.1 path to hotspot files has changed. It was 'flash' before, now it's 'disk'.
Did not find this in changelog.
Got hotspot misfunction, because I use custom redirect pages.

Just bear it in mind.
 
DVMi
just joined
Posts: 4
Joined: Mon Sep 12, 2016 1:07 pm

Re: v6.41.1 [current]

Fri Feb 09, 2018 1:37 pm

I have to downgrade firmware on cAP and Hex POE wireless routers to 6.41.
In IP Hotspot settings I select correct path from dropdown menu, i.e. 'disk/custom-hotspot'. But it save path as 'flash/disk/custom-spotspot' and display default auth page to connected wireless stations. This behavior is either using WinBox or CLI.

This look like a bug.

On cAP Lite 6.41.1 path saves correctly.
 
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1390
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.41.1 [current]

Fri Feb 09, 2018 3:29 pm

Version 6.41.2 has been released:
viewtopic.php?f=21&t=130626

Who is online

Users browsing this forum: No registered users and 4 guests