Community discussions

 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

v6.41.4 [current]

Mon Apr 09, 2018 1:03 pm

RouterOS version 6.41.4 has been released in public "current" channel!

Before an upgrade:
1) Remember to make backup/export files before an upgrade and save them on another storage device;
2) Make sure the device will not lose power during upgrade process;
3) Device has enough free storage space for all RouterOS packages to be downloaded.

What's new in 6.41.4 (2018-Apr-05 12:23):

!) tile - improved overall system performance and stability ("/system routerboard upgrade" required);
*) led - fixed unused "link-act-led" LED trigger on RBLHG 2nD, RBLHG 2nD-XL and RBSXTsq 2nD;
*) led - removed unused "link-act-led" trigger for devices which does not use it;
*) netinstall - sign Netinstall executable with an Extended Validation Code Signing Certificate;
*) poe - do not show "poe-out-current" on devices which can not determine it;
*) poe - hide PoE related properties on interfaces which does not provide power output;
*) winbox - made UDP local and remote TX size parameters optional in Bandwidth Test tool;
*) winbox - show dual SIM options only for RouterBOARDs which does have two SIM slots;
*) winbox - use proper graph name for HDD graphs;
*) wireless - enable all chains by default on devices without external antennas after configuration reset;

To upgrade, click "Check for updates" at /system package in your RouterOS configuration interface, or head to our download page: http://www.mikrotik.com/download

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after some problem has appeared on device

Please keep this forum topic strictly related to this concrete RouterOS release.
 
dmorg
just joined
Posts: 1
Joined: Mon Apr 09, 2018 2:48 pm

Re: v6.41.4 [current]

Mon Apr 09, 2018 2:51 pm

Still no fix for hAP ac2 poor WiFi performance unfortunatly.
 
User avatar
dasiu
Trainer
Trainer
Posts: 232
Joined: Fri Jan 30, 2009 11:41 am
Location: Reading, UK
Contact:

Re: v6.41.4 [current]

Mon Apr 09, 2018 3:04 pm

Thanks! :)
!) tile - improved overall system performance and stability ("/system routerboard upgrade" required);
- is it the same improvement, as in 6.41.3 (identical description), or yet a new improvement (improving it even more), or did the improvement in 6.41.3 didn't work? :)
 
Simono
Frequent Visitor
Frequent Visitor
Posts: 50
Joined: Tue Mar 20, 2018 9:41 am

Re: v6.41.4 [current]

Mon Apr 09, 2018 3:22 pm

CAP AC remonte upgrade from router:
upgrade status: no such file, failed, failed to download file 'routeros-arm-6.41.4.npk', no such file'
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.41.4 [current]

Mon Apr 09, 2018 5:53 pm

dmorg - First this problem must be resolved within RC version and backported to bugfix/current channels only if it would be possible. Please follow the changelog.
dasiu - We can say that this is improved improvement :)
Simono - I do not see any problems with download links. Do you try "Check for updates" feature? If you do, which IP is resolved by this command ":put [:resolve upgrade.mikrotik.com]"? Try the command multiple times until resolved IP addresses start to repeat themselves. Should be - 159.148.147.204 and 159.148.172.226.
 
Simono
Frequent Visitor
Frequent Visitor
Posts: 50
Joined: Tue Mar 20, 2018 9:41 am

Re: v6.41.4 [current]

Mon Apr 09, 2018 7:03 pm

strods upgrade from Winbox connected directly to Cap ac is OK. Eariel I was connected remonte to my router and I do upgrade from Capsman on it to Caps connected to router. On others Caps (lite) upgrade was OK only on Cap ac upgrade was unsucces. Now I have 6.41.4 on all my units.
 
jetelina
newbie
Posts: 28
Joined: Thu Jun 27, 2013 11:22 pm

Re: v6.41.4 [current]

Mon Apr 09, 2018 10:53 pm

Hi,
after upgrade to 6.41.4 I have noticed in log message "installed wireless@-6.41.4"

Few lines above there is "verified wireless-6.41.4-mipsbe.npk", which is correct.
After upgrade in System - Packages shows correct "wireless" with version.

I think I have also seen that in 6.41.3.
Just log message seems to be wrong - looks like typo or small bug.
Mikrotik RB750GL - RouterOS 6.41.4
 
netflow
Frequent Visitor
Frequent Visitor
Posts: 61
Joined: Sat Oct 01, 2016 3:53 pm

Re: v6.41.4 [current]

Mon Apr 09, 2018 11:11 pm

Sadly still no fix for the issue introduced with 6.41.3 with LTE modem Huawei ME909s-120 connected through USB port.
 
irghost
Member Candidate
Member Candidate
Posts: 282
Joined: Sun Feb 21, 2016 1:49 pm

Re: v6.41.4 [current]

Mon Apr 09, 2018 11:17 pm

where is the ova Download link in download page?
MTCNA MTCRE MTCTCE MTCUME MTCWE MTCIPv6E MTCINE
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.41.4 [current]

Tue Apr 10, 2018 7:16 am

jetelina - Do not worry about that. In the past (old versions) we had wireless package and now we have another one which is also called wireless. This "@" symbol is there on purpose;
netflow - Is modem working properly on 6.42rc?
irghost - Will be back on download page as soon as possible.
 
woro
newbie
Posts: 47
Joined: Sun May 24, 2015 12:47 am

Re: v6.41.4 [current]

Tue Apr 10, 2018 9:32 am

Still no fix for hAP ac2 poor WiFi performance unfortunatly.
Since I just ordered a few. Is there any pointer to more information about that one?
 
pepek
just joined
Posts: 23
Joined: Tue Apr 10, 2018 12:14 am
Location: CZ

Re: v6.41.4 [current]

Tue Apr 10, 2018 9:56 am

Still no fix for hAP ac2 poor WiFi performance unfortunatly.
Since I just ordered a few. Is there any pointer to more information about that one?
Try this topic viewtopic.php?f=7&t=132648 - RC builds are slightly better, but still crappy. Still no info from MT, only many complains from users.
 
Kindis
Member Candidate
Member Candidate
Posts: 251
Joined: Tue Nov 01, 2011 6:54 pm

Re: v6.41.4 [current]

Tue Apr 10, 2018 10:15 am

Updated two 3011, two wAP AC, one CHR running on Hyper-V and also a 493G without any issues.
Are there any official plan to fix the firmware so it auto upgrades so I do not have to restart each machine twice every time? By offical plan I mean when this will be solved and not Yes it will be solved.
 
eddieb
Member Candidate
Member Candidate
Posts: 141
Joined: Thu Aug 28, 2014 10:53 am
Location: Netherlands

Re: v6.41.4 [current]

Tue Apr 10, 2018 10:19 am

Updated RB2011UAS, RB750GL, RB1100, RB962 (9x), CRS125 and CHR running Dude without any issues
Running 6.45.7 (stable) on :
CCR1009-8G-1S (2x ipsec/l2tp site-to-site, ipsec/l2tp roadwarrior, dhcpd, dns), CRS125-24G-1S, RB1100, RB962UiGS-5HacT2HnT (10pc), RB931-2nD, RB951, RB750GL ,RB2011UAS-RM, CHR running dude (CHR running in VirtualBox on OSX)
 
Simono
Frequent Visitor
Frequent Visitor
Posts: 50
Joined: Tue Mar 20, 2018 9:41 am

Re: v6.41.4 [current]

Tue Apr 10, 2018 10:35 am

For me the speed is also poor on my cAP AC, on cAP Lite i've got better speed and stability. I'm dissapointed. I've buy some cAP AC to my company and now ...........
I,ve have connected all cAPs to CAPsMAN on router.
 
Lakis
Forum Veteran
Forum Veteran
Posts: 701
Joined: Wed Sep 23, 2009 7:52 pm

Re: v6.41.4 [current]

Tue Apr 10, 2018 10:45 am

Dear Mikrotik please for the last time fix throughput problem when hw offload is enabled on 960PGS (hEX PoE)
Just add two units to hEX make a btest from 1gbit Unit to 100mbit (Or from 100mbit to 100mbit) Unit with hwofload=yes
Also log show "apr/10/2018 09:43:13 system,info,critical cpu not running at default frequency" cpu is set on default 800Mhz?
 
fvdm
just joined
Posts: 3
Joined: Tue Apr 10, 2018 2:37 pm

Re: v6.41.4 [current]

Tue Apr 10, 2018 2:51 pm

Updated a 2x CRS226 without a problem. But...... my RB2011 is stuck. I hear a beep every few seconds, display shows routerboot, starting kernel....... over and over again.
Power off/on does not solve anything. How to fix this (preferably without losing my config)?

Yeah, recently got the RB2011 back in use and forgot to back-up my config :( .
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.41.4 [current]

Tue Apr 10, 2018 3:31 pm

woro, pepek, Simono - We are working on fixes for wireless improvements. Please note that this is "user forum". In order to contact MikroTik staff, you should write to support@mikrotik.com. Please do not expect that your problem will be resolved after you have posted that on forum. Yes, we might notice your posts and topics, but official way is through an e-mail.
Kindis - We are slowly moving forward and preparing for something like this. In future, at some point, firmware upgrade will happen together with RouterOS upgrade.
Lakis - Have you reported this to support@mikrotik.com?
fvdm - Use Netinstall and make sure that "Keep old configuration" is enabled - https://wiki.mikrotik.com/wiki/Manual:Netinstall
 
fvdm
just joined
Posts: 3
Joined: Tue Apr 10, 2018 2:37 pm

Re: v6.41.4 [current]

Tue Apr 10, 2018 3:39 pm

fvdm - Use Netinstall and make sure that "Keep old configuration" is enabled - https://wiki.mikrotik.com/wiki/Manual:Netinstall
Thanks, will give it a try!
 
woro
newbie
Posts: 47
Joined: Sun May 24, 2015 12:47 am

Re: v6.41.4 [current]

Tue Apr 10, 2018 6:08 pm

woro, pepek, Simono - We are working on fixes for wireless improvements. Please note that this is "user forum". In order to contact MikroTik staff, you should write to support@mikrotik.com. Please do not expect that your problem will be resolved after you have posted that on forum. Yes, we might notice your posts and topics, but official way is through an e-mail.
Thanks for the feedback. I came across those issues only today in that announcement so I was looking for pointers only (yet).
But I also understood now that it's not required to report further hAP ac2 wifi issues? Just asking because I got my first one today and going to test a bit.

Apart from that I fully get that the support mail is the only right thing (process wise).
 
fvdm
just joined
Posts: 3
Joined: Tue Apr 10, 2018 2:37 pm

Re: v6.41.4 [current]

Tue Apr 10, 2018 7:42 pm

fvdm - Use Netinstall and make sure that "Keep old configuration" is enabled - https://wiki.mikrotik.com/wiki/Manual:Netinstall
Worked like a charm, thanks a lot!
 
netflow
Frequent Visitor
Frequent Visitor
Posts: 61
Joined: Sat Oct 01, 2016 3:53 pm

Re: v6.41.4 [current]

Tue Apr 10, 2018 8:37 pm

@strods I have juste installed 6.42RC56, so far so good, no issue with LTE on USB. Thanks.
 
mikeeg02
just joined
Posts: 10
Joined: Fri Mar 30, 2018 2:28 am

Re: v6.41.4 [current]

Tue Apr 10, 2018 11:48 pm

RouterOS version 6.41.4 has been released in public "current" channel!
!) tile - improved overall system performance and stability ("/system routerboard upgrade" required);

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after some problem has appeared on device

Please keep this forum topic strictly related to this concrete RouterOS release.
I have a CCR1009 thats connected to a cisco 2911. After about 10 days or so, latency suddenly becomes sporadic. Did not happen on 6.38.5. Does happen on 6.41.3, will the above listed in 6.41.4 fix this issue? As trivial as it sounds, admin down the port, and back up seems to fix it. We had to set both devices to auto negotiate for them to link up at all. I have tried emailing support on another larger issue with a RB1100AHx4, but Im not getting replies.......... I have asked for updates.......

EDIT: Not sure why I thought CRS, It was a CCR1009
Last edited by mikeeg02 on Wed Apr 11, 2018 4:53 pm, edited 1 time in total.
 
User avatar
SirPrikol
just joined
Posts: 21
Joined: Wed Oct 11, 2017 12:36 pm

Re: v6.41.4 [current]

Tue Apr 10, 2018 11:55 pm

New bridge interface created with L2 65535 MTU. After then all local network down and cpu on all mikrotik routerboard is above 100%
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.41.4 [current]

Wed Apr 11, 2018 7:11 am

woro - It is not possible through forum to determine what kind of problem do you have. I recommend that you still contact support team since problem might even not be related to hardware.
netflow - Please write to support@mikrotik.com and explain the problem that you have with 6.41.4 and that you do not have the same issue on 6.42rc. We will try to include required fixes into 6.41.5 release.
mikeeg02 - Quoted fix is for CCR devices, not for the CRS. Does the same problem persist on 6.42rc version? Please test this if possible. If problem persist, then contact support.
SirPrikol - Please generate supout files on your router and send them to support@mikrotik.com. Without additional information we can not determine what is the cause of the problem that you have.
 
edgarsm
just joined
Posts: 5
Joined: Wed Apr 04, 2018 11:06 pm

Re: v6.41.4 [current]

Wed Apr 11, 2018 7:38 am

After upgrade I don't see anymore LTE AP profile in Quick Menu dropdown list. Device: wAP LTE kit. After changing some other settings and Apply, I cannot connect to my device with WinBox and WebFig anymore because apparently another profile was applied and management IP address was reset.
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.41.4 [current]

Wed Apr 11, 2018 9:48 am

edgarsm - This fix is available only in 6.42rc version and not in the 6.41.4 - "quickset - properly detect LTE interface on startup". Sounds that this is the fix which is required on your case.
 
User avatar
SirPrikol
just joined
Posts: 21
Joined: Wed Oct 11, 2017 12:36 pm

Re: v6.41.4 [current]

Wed Apr 11, 2018 10:34 am

SirPrikol - Please generate supout files on your router and send them to support@mikrotik.com. Without additional information we can not determine what is the cause of the problem that you have.
send
[Ticket#2018041122002806]
 
mikeeg02
just joined
Posts: 10
Joined: Fri Mar 30, 2018 2:28 am

Re: v6.41.4 [current]

Wed Apr 11, 2018 5:01 pm

mikeeg02 - Quoted fix is for CCR devices, not for the CRS. Does the same problem persist on 6.42rc version? Please test this if possible. If problem persist, then contact support.
Im not sure why I said CRS, it is a CCR1009. My mistake, I'm about half sick. What was addressed with the tile improvement? I have not upgraded it to 6.41.4 yet, the problem had shown itself ~10 days after upgrading to 6.41.3 from 6.38.5 which never missed a beat.

Any suggestions on getting a reply from support on [Ticket#2018040522000294] ? I got an initial reply, and nothing further.
 
hapi
Member Candidate
Member Candidate
Posts: 223
Joined: Fri Mar 11, 2011 11:21 am
Location: Czech Republic

Re: v6.41.4 [current]

Wed Apr 11, 2018 6:06 pm

capsman: with "name format = prefix", missing a dash in name intarface. WIth "name format = identity" is ok.

name-format=prefix name-prefix=cap2
result:
 #      NAME                                            RADIO-MAC         MASTER-INTERFACE                                           
 0 MDBR cap21                                           E4:8D:8C:9E:89:AC none    

but
name-format=identity
result:
 #      NAME                                            RADIO-MAC         MASTER-INTERFACE                                           
 0 MDBR hAP lite-1                                      E4:8D:8C:9E:89:AC none  
 
zeane
just joined
Posts: 12
Joined: Fri Apr 11, 2008 5:14 am
Location: Cape Town - SOUTH AFRICA

Re: v6.41.4 [current]

Wed Apr 11, 2018 7:24 pm

Updated a 2x CRS226 without a problem. But...... my RB2011 is stuck. I hear a beep every few seconds, display shows routerboot, starting kernel....... over and over again.
Power off/on does not solve anything. How to fix this (preferably without losing my config)?

Yeah, recently got the RB2011 back in use and forgot to back-up my config :( .
II have come across exactly the same issue on RB3100 and also on a Dynadish, >>> after upgrading via winbox, then wait for reboot. The system thereafter apparently restarts imto a continual loop. As soon as it starts , it restarts. No time to configure setup or netinstall. Extremely frustrating.

Now what does one do??
 
User avatar
CZFan
Forum Guru
Forum Guru
Posts: 1437
Joined: Sun Oct 09, 2016 8:25 pm
Location: South Africa, Randburg
Contact:

Re: v6.41.4 [current]

Thu Apr 12, 2018 12:40 am

Upgraded SXT LTE remotely from 6.40.6 to 6.41,4, device rebooted after downloading new ros but I can't access the device anymore.
Arranged with client to meet onsite in the morning, will revert back once I have more re info
MTCNA, MTCTCE, MTCRE & MTCINE
 
pepek
just joined
Posts: 23
Joined: Tue Apr 10, 2018 12:14 am
Location: CZ

Re: v6.41.4 [current]

Thu Apr 12, 2018 11:24 pm

woro, pepek, Simono - We are working on fixes for wireless improvements. Please note that this is "user forum". In order to contact MikroTik staff, you should write to support@mikrotik.com. Please do not expect that your problem will be resolved after you have posted that on forum. Yes, we might notice your posts and topics, but official way is through an e-mail.
Of course, this is discussion forum, not helpdesk. You cannot monitor all topics and respond to all posts with symptoms of possible problem. But you can respond to problem discussed in at least five different topics (to which you respond to other questions). Just quick note "working on it" would reduce number of posts in these topics to half. Systematically ignoring all mentions about this problem seems very strange and suspicious. Admiring that there is a problem and you are trying to make it work is fair and trustworthy behavior.
When I find some problem, I try to search for anybody else in same situation. When I find some public blog post/forum thread, I try to search it for solution/more info (and not to bother support with repeated question to problem with already known and published solution). If I don't find any public info, I contact support/helpdesk. Here? I found tens of users with exactly the same problem, MikroTik responses to other questions in same topics but absolutely no info about current state of this bug. This can confuse users and make them panic.
Is it better to receive tens of questions about wifi speed to helpdesk every day, or to send few posts to forum, that this is known general problem and you are working on it?
 
User avatar
CZFan
Forum Guru
Forum Guru
Posts: 1437
Joined: Sun Oct 09, 2016 8:25 pm
Location: South Africa, Randburg
Contact:

Re: v6.41.4 [current]

Fri Apr 13, 2018 3:02 am

Upgraded SXT LTE remotely from 6.40.6 to 6.41,4, device rebooted after downloading new ros but I can't access the device anymore.
Arranged with client to meet onsite in the morning, will revert back once I have more re info

Unfortunately client restarted device before I could get to site, so can't add anything more
MTCNA, MTCTCE, MTCRE & MTCINE
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.41.4 [current]

Fri Apr 13, 2018 7:02 am

zeane - Please connect serial console cable to this router, connect to serial console from your computer, power on router and wait for it to go into reboot. After that provide whole serial output to support@mikrotik.com.
pepek - We are trying our best and will try to improve our communication with users through forum. However, point of my previous post was that the fastest way to get a response would be through official support e-mail.
 
trujulu
just joined
Posts: 2
Joined: Tue Jun 13, 2017 11:13 pm

Re: v6.41.4 [current]

Mon Apr 16, 2018 11:33 pm

I am having, since I have mikrotik problems with multicast, related with continuity errors on the channels.

P.S.: Restarting IGMP Proxy partial fix it. But it is not a solution for me.
 
nin
just joined
Posts: 22
Joined: Sat Feb 20, 2010 9:02 pm

Re: v6.41.4 [current]

Tue Apr 17, 2018 12:26 pm

I just recently upgraded all of my devices to v6.41.4 [current].
I have one RB450G (configured as a pure switch) behind my CCR1016-12G router. Thus, the RB450G itself should not ask for and should not get any IP assigned from the DHCP server (CCR).
But since I updated the RouterOS, suddenly my logs on my CCR are flooded with
dhcp,warning dhcp1 offering lease 192.168.7.247 for <MAC_OF_RB450G_HERE> without success
Any idea what is wrong now?

Cheers, nin
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1409
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.41.4 [current]

Tue Apr 17, 2018 1:58 pm

Version 6.42 has been released in current channel:
viewtopic.php?f=21&t=133272

Who is online

Users browsing this forum: No registered users and 15 guests