Community discussions

 
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1395
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

v6.42 [current]

Tue Apr 17, 2018 1:57 pm

RouterOS version 6.42 has been released in public "current" channel!

Before an upgrade:
1) Remember to make backup/export files before an upgrade and save them on another storage device;
2) Make sure the device will not lose power during upgrade process;
3) Device has enough free storage space for all RouterOS packages to be downloaded.

What's new in 6.42 (2018-Apr-13 11:03):

!) tile - improved system performance and stability ("/system routerboard upgrade" required);
!) w60g - increased distance for wAP 60G to 200+ meters;
*) bridge - added host aging timer for CRS3xx and Atheros hw-bridges;
*) bridge - added per-port forwarding options for broadcasts, unknown-multicasts and unknown-unicasts;
*) bridge - added per-port learning options;
*) bridge - added support for static hosts;
*) bridge - fixed "master-port" configuration conversion from pre-v6.41 RouterOS versions;
*) bridge - fixed bridge port interface parameter under "/interface bridge host print detail";
*) bridge - fixed false MAC address learning on hAP ac^2 and cAP ac devices;
*) bridge - fixed incorrect "fast-forward" enabling when ports were switched;
*) bridge - fixed MAC learning for VRRP interfaces on bridge;
*) bridge - fixed reliability on software bridges when used on devices without switch chip;
*) bridge - hide options for disabled bridge features in CLI;
*) bridge - show "hw" flags only on Ethernet interfaces and interface lists;
*) capsman - added "allow-signal-out-of-range" option for Access List entries;
*) capsman - added support for "interface-list" in Access List and Datapath entries;
*) capsman - improved CAPsMAN responsiveness with large amount of CAP interfaces;
*) capsman - log "signal-strength" when successfully connected to AP;
*) certificate - added PKCS#10 version check;
*) certificate - dropped DES support and added AES instead for SCEP;
*) certificate - dropped MD5 support and require SHA1 as minimum for SCEP;
*) certificate - fixed incorrect SCEP URL after an upgrade;
*) chr - added "open-vm-tools" on VMware installations;
*) chr - added "qemu-guest-agent" and "virtio-scsi" driver on KVM installations;
*) chr - added "xe-daemon" on Xen installations;
*) chr - added support for Amazon Elastic Network Adapter (ENA) driver;
*) chr - added support for booting from NVMe disks;
*) chr - added support for Hyper-V ballooning, guest quiescing, host-guest file transfer, integration services and static IP injection;
*) chr - added support for NIC hot-plug on VMware and Xen installations;
*) chr - fixed additional disk detaching on Xen installations;
*) chr - fixed interface matching by name on VMware installations;
*) chr - fixed interface naming order when adding more than 4 interfaces on VMware installations;
*) chr - fixed suspend on Xen installations;
*) chr - make additional disks visible under "/disk" on Xen installations;
*) chr - make Virtio disks visible under "/disk" on KVM installations;
*) chr - run startup scripts on the first boot on AWS and Google Cloud installations;
*) console - fixed "idpr-cmtp" protocol by changing its value from 39 to 38;
*) console - improved console stability after it has not been used for a long time;
*) crs1xx/2xx - added BPDU value for "ingress-vlan-translation" menu "protocol" option;
*) crs212 - fixed Ethernet boot when connected to boot server through CRS326 device;
*) crs326 - fixed known multicast flooding to the CPU;
*) crs3xx - added switch port "storm-rate" limiting options;
*) crs3xx - added “hw-offload” support for 802.3ad and “balance-xor” bonding;
*) detnet - fixed "detect-internet" feature unavailability if router had too long identity (introduced in v6.41);
*) dhcp - improved DHCP service reliability when it is configured on bridge interface;
*) dhcp - reduced resource usage of DHCP services;
*) dhcpv4-server - added "dns-none" option to "/ip dhcp-server network dns";
*) dhcpv6 - make sure that time is set before restoring bindings;
*) dhcpv6-client - added info exchange support;
*) dhcpv6-client - added possibility to specify options;
*) dhcpv6-client - added support for options 15 and 16;
*) dhcpv6-client - implement confirm after reboot;
*) dhcpv6-server - added DHCPv4 style user options;
*) dns - do not generate "Undo" messages on changes to dynamic servers;
*) email - set maximum number of sessions to 100;
*) fetch - added "http-content-type" option to allow setting MIME type of the data in free text form;
*) fetch - added "output" option for all modes in order to return result to file, variable or ignore it;
*) fetch - increased maximum number of sessions to 100;
*) filesystem - implemented additional system storage maintenance checks on ARM CPU based devices;
*) flashfig - properly apply configuration provided by Flashfig;
*) gps - improved NMEA sentence handling;
*) health - added log warning when switching between redundant power supplies;
*) health - fixed empty measurements on CRS328-24P-4S+RM;
*) hotspot - improved HTTPS matching in Walled Garden rules;
*) ike1 - display error message when peer requests "mode-config" when it is not configured;
*) ike1 - do not accept "mode-config" reply more than once;
*) ike1 - fixed wildcard policy lookup on responder;
*) ike2 - fixed framed IP address received from RADIUS server;
*) interface - improved interface configuration responsiveness;
*) ippool - added ability to specify comment;
*) ippool6 - added pool name to "no more addresses left" error message;
*) ipsec - fixed AES-CTR and AES-GCM support on RB1200;
*) ipsec - improved single tunnel hardware acceleration performance on MMIPS devices;
*) ipsec - properly detect interface for "mode-config" client IP address assignment;
*) ipv6 - fixed IPv6 behaviour when bridge port leaves bridge;
*) ipv6 - update IPv6 DNS from RA only when it is changed;
*) kidcontrol - initial work on "/ip kid-control" feature;
*) led - added "Dark Mode" support for wAP 60G;
*) led - added w60g alignment trigger;
*) led - fixed unused "link-act-led" LED trigger on RBLHG 2nD, RBLHG 2nD-XL and RBSXTsq 2nD;
*) led - removed unused "link-act-led" trigger for devices which does not use it;
*) lte - added initial support for Quectel LTE EP06-E;
*) lte - added initial support for SIM7600 LTE modem interface;
*) lte - added support for the user and password authentication for wAP-LTE-kit-US (R11e-LTE-US);
*) lte - do not add DHCP client on LTE modems that doesn't use DHCP;
*) lte - fixed DHCP client adding for MF823 modem;
*) lte - fixed LTE band setting for SXT LTE;
*) mac-ping - fixed duplicate responses;
*) modem - added initial support for AC340U;
*) netinstall - fixed MMIPS RouterOS package description;
*) netinstall - sign Netinstall executable with an Extended Validation Code Signing Certificate;
*) netwatch - limit to read, write, test and reboot policies for Netwatch script execution;
*) poe - do not show "poe-out-current" on devices which can not determine it;
*) poe - hide PoE related properties on interfaces that does not provide power output;
*) ppp - added initial support for NETGEAR AC340U and ZyXEL WAH1604;
*) ppp - allow to override remote user PPP profile via "Mikrotik-Group";
*) quickset - fixed NAT if PPPoE client is used for Internet access;
*) quickset - properly detect IP address when one of the bridge modes is used;
*) quickset - properly detect LTE interface on startup;
*) quickset - show "G" flag for guest users;
*) quickset - use "/24" subnet for local network by default;
*) r11e-lte - improved LTE connection initialization process;
*) rb1100ahx4 - improved reliability on hardware encryption;
*) routerboard - added RouterBOOT "auto-upgrade" after RouterOS upgrade (extra reboot required);
*) routerboard - properly detect hAP ac^2 RAM size;
*) sniffer - fixed "/tool sniffer packet" results listed in incorrect order;
*) snmp - added "/caps-man interface print oid";
*) snmp - added "/interface w60g print oid";
*) snmp - added "board-name" OID;
*) snmp - improved request processing performance for wireless and CAP interfaces;
*) ssh - fixed SSH service becoming unavailable;
*) ssh - generate SSH keys only on the first connect attempt instead of the first boot;
*) ssh - improved key import error messages;
*) ssh - remove imported public SSH keys when their owner user is removed;
*) switch - hide "ingress-rate" and "egress-rate" for non-CRS3xx switches;
*) tile - added "aes-ctr" hardware acceleration support;
*) tr069-client - added "DownloadDiagnostics" and "UploadDiagnostics";
*) tr069-client - correctly return “TransferComplete” after vendor configuration file transfer;
*) tr069-client - fixed "/tool fetch" commands executed with ".alter" script;
*) tr069-client - fixed HTTPS authentication process;
*) traffic-flow - fixed IPv6 destination address value when IPFIX protocol is used;
*) upgrade - improved RouterOS upgrade process and restrict upgrade from RouterOS older than v5.16;
*) ups - improved communication between router and UPS;
*) ups - improved disconnect message handling between RouterOS and UPS;
*) userman - added support for ARM and MMIPS platform;
*) w60g - added "tx-power" setting (CLI only);
*) w60g - added RSSI information (CLI only);
*) w60g - added TX sector alignment information (CLI only);
*) watchdog - retry to send "autosupout.rif" file to an e-mail if initial delivery failed up to 3 times within 20 second interval;
*) winbox - added "antenna" setting under GPS settings for MIPS platform devices;
*) winbox - added "crl-store" setting to certificate settings;
*) winbox - added "insert-queue-before" to DHCP server;
*) winbox - added "use-dn" setting in OSPF instance General menu;
*) winbox - added 160 MHz "channel-width" to wireless settings;
*) winbox - added DHCPv6 client info request type and updated statuses;
*) winbox - added missing protocol numbers to IPv4 and IPv6 firewall;
*) winbox - added possibility to delete SMS from inbox;
*) winbox - allow to comment new object without committing it;
*) winbox - allow to open bridge host entry;
*) winbox - fixed name for "out-bridge-list" parameter under bridge firewall rules;
*) winbox - fixed typo from "UPtime" to "Uptime";
*) winbox - fixed Winbox closing when viewing graph which does not contain any data;
*) winbox - improved stability when using trackpad scrolling in large lists;
*) winbox - made UDP local and remote TX size parameters optional in Bandwidth Test tool;
*) winbox - moved "ageing-time" setting from STP to General tab;
*) winbox - moved OSPF instance "routing-table" setting in OSPF instance General menu;
*) winbox - removed “VLAN” section from “Switch” menu for CRS3xx devices;
*) winbox - show Bridge Port PVID column by default;
*) winbox - show CQI in LTE info;
*) winbox - show dual SIM options only for RouterBOARDS which does have two SIM slots;
*) winbox - show only master CAP interfaces under CAPsMAN wireless scan tool;
*) winbox - use proper graph name for HDD graphs;
*) wireless - added "realm-raw" setting for "/interface wireless interworking-profiles" (CLI only);
*) wireless - added initial support for "nstreme-plus";
*) wireless - added support for "band=5ghz-n/ac";
*) wireless - added support for "interface-list" for Access List entries;
*) wireless - added support for legacy AR9485 chipset;
*) wireless - enable all chains by default on devices without external antennas after configuration reset;
*) wireless - fixed "wds-slave" channel selection when single frequency is specified;
*) wireless - fixed incompatibility with macOS clients;
*) wireless - fixed long "scan-list" entries not working for ARM based wireless interfaces;
*) wireless - fixed nv2 protocol on ARM platform SXTsq devices;
*) wireless - fixed RB911-5HnD low transmit power issue;
*) wireless - fixed RTS/CTS option for the ARM based wireless devices;
*) wireless - fixed wsAP wrong 5 GHz interface MAC address;
*) wireless - improved compatibility with specific wireless AC standard clients;
*) wireless - improved Nv2 PtMP performance;
*) wireless - improved packet processing on ARM platform devices;
*) wireless - improved wireless performance on hAP ac^2 devices while USB is being used;
*) wireless - improved wireless scan functionality;

To upgrade, click "Check for updates" at /system package in your RouterOS configuration interface, or head to our download page: http://www.mikrotik.com/download

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after some problem has appeared on device

Please keep this forum topic strictly related to this concrete RouterOS release.
 
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1395
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.42 [current]

Tue Apr 17, 2018 2:01 pm

Please note that improvements regarding upgrade process will become active only after an upgrade and will not affect upgrade to version 6.42.

Upgrade process happens on the old version, not the one which you try to put on your RouterOS instance.
 
jarda
Forum Guru
Forum Guru
Posts: 7575
Joined: Mon Oct 22, 2012 4:46 pm

Re: v6.42 [current]

Tue Apr 17, 2018 2:16 pm

Well. Looks awesome. Going to test how it helps to WiFi on hap ac2.
 
nin
just joined
Posts: 22
Joined: Sat Feb 20, 2010 9:02 pm

Re: v6.42 [current]

Tue Apr 17, 2018 2:20 pm

Hi,

just posted this in the v6.41.4 current thread, here again because the problem is still there... (and wasn't with v.6.41.2):

I just upgraded 2 minutes ago all of my devices to v6.42 [current].
I have one RB450G (configured as a pure switch) behind my CCR1016-12G router. Thus, the RB450G itself should not ask for and should not get any IP assigned from the DHCP server (CCR).
But since I updated the RouterOS, suddenly my logs on my CCR are flooded with
dhcp,warning dhcp1 offering lease 192.168.7.247 for <MAC_OF_RB450G_HERE> without success
Any idea what is wrong now?

Cheers, nin
 
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1395
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.42 [current]

Tue Apr 17, 2018 2:36 pm

nin - You should send supout file to support. Is it possible that "Detect Internet" feature is enabled on your device?
 
nin
just joined
Posts: 22
Joined: Sat Feb 20, 2010 9:02 pm

Re: v6.42 [current]

Tue Apr 17, 2018 2:43 pm

nin - You should send supout file to support. Is it possible that "Detect Internet" feature is enabled on your device?
@strods: On the RB450G:
user@RB450G] /interface detect-internet> print
detect-interface-list: none
lan-interface-list: none
wan-interface-list: none
internet-interface-list: none
supout file of which device, the CCR?

Cheers, nin
 
squeeze
Member Candidate
Member Candidate
Posts: 145
Joined: Thu Mar 22, 2018 7:53 pm

Re: v6.42 [current]

Tue Apr 17, 2018 2:44 pm

*) winbox - added 160 MHz "channel-width" to wireless settings;

What Mikrotik devices support 160 MHz channel WiFi?
 
MartijnVdS
Frequent Visitor
Frequent Visitor
Posts: 93
Joined: Wed Aug 13, 2014 9:36 am

Re: v6.42 [current]

Tue Apr 17, 2018 3:09 pm

nin - You should send supout file to support. Is it possible that "Detect Internet" feature is enabled on your device?
@strods: On the RB450G:
user@RB450G] /interface detect-internet> print
detect-interface-list: none
lan-interface-list: none
wan-interface-list: none
internet-interface-list: none
supout file of which device, the CCR?

Cheers, nin
I'd send both the CCR one and the 450 one, while the problem is occurring. Just to be sure.
 
anuser
Member
Member
Posts: 338
Joined: Sat Nov 29, 2014 7:27 pm

Re: v6.42 [current]

Tue Apr 17, 2018 3:10 pm

Well. Looks awesome. Going to test how it helps to WiFi on hap ac2.
I´m awaiting your results...
 
User avatar
zilf
just joined
Posts: 7
Joined: Fri Jul 22, 2016 4:06 pm
Location: Ukraine

Re: v6.42 [current]

Tue Apr 17, 2018 3:38 pm

RB850Gx2. After upgrade ROS to 6.42 does not show Tx rate when used Torch.
Image
 
yhfung
Member Candidate
Member Candidate
Posts: 142
Joined: Tue Nov 20, 2012 6:58 pm

Re: v6.42 [current]

Tue Apr 17, 2018 4:07 pm

It seems the results on hAP ac^2 using the new firmware v6.42 is more or less the same as v6.42rc52. Please take a look at the following five runs. The results are still not satisfactory as the average speed is around 130Mbps something, which is pretty far away from our expectations of over 300Mbps (stable and zero Retry count).

Please find sometime to see the last log which provides a lot of information of instability of download rate and packet retry count. Whenever the higher value of Retry count, the lower the speed.

Please help to resolve this issue as I have already brought 4 pieces of hAP ac^2. If you are able to resolve this issue, I am very sure that your sales of this product will be significantly increased.

YH

First Attempt
[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-300.00 sec  9.22 GBytes   264 Mbits/sec  4236             sender
[  4]   0.00-300.00 sec  9.22 GBytes   264 Mbits/sec                  receiver
#
Second Attempt
[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-300.00 sec  5.25 GBytes   150 Mbits/sec  5845             sender
[  4]   0.00-300.00 sec  5.25 GBytes   150 Mbits/sec                  receiver
#
Third Attempt
[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-300.01 sec  5.44 GBytes   156 Mbits/sec  4605             sender
[  4]   0.00-300.01 sec  5.44 GBytes   156 Mbits/sec                  receiver
#
Fourth Attempt
[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-300.00 sec  4.79 GBytes   137 Mbits/sec  6206             sender
[  4]   0.00-300.00 sec  4.79 GBytes   137 Mbits/sec                  receiver
#
Fifth Attempt
[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-300.00 sec  4.90 GBytes   140 Mbits/sec  3702             sender
[  4]   0.00-300.00 sec  4.90 GBytes   140 Mbits/sec                  receiver
#
The following are the log showing the downloading rate and packet retry count due to errors (Retr)
Accepted connection from 192.168.55.70, port 60260
[  5] local 192.168.55.203 port 5201 connected to 192.168.55.70 port 60261
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec  41.1 MBytes   344 Mbits/sec   41    315 KBytes
[  5]   1.00-2.01   sec  42.1 MBytes   352 Mbits/sec    0    342 KBytes
[  5]   2.01-3.01   sec  30.8 MBytes   258 Mbits/sec   49    139 KBytes
[  5]   3.01-4.01   sec  12.6 MBytes   106 Mbits/sec   53   80.6 KBytes
[  5]   4.01-5.01   sec  14.4 MBytes   120 Mbits/sec   51   72.1 KBytes
[  5]   5.01-6.01   sec  8.08 MBytes  67.8 Mbits/sec   84   52.3 KBytes
[  5]   6.01-7.01   sec  8.08 MBytes  67.8 Mbits/sec   24   49.5 KBytes
[  5]   7.01-8.01   sec  7.46 MBytes  62.5 Mbits/sec   29   46.7 KBytes
[  5]   8.01-9.01   sec  9.94 MBytes  83.4 Mbits/sec   28   56.6 KBytes
[  5]   9.01-10.01  sec  8.70 MBytes  73.0 Mbits/sec   67   65.0 KBytes
[  5]  10.01-11.01  sec  7.02 MBytes  58.9 Mbits/sec   57   55.1 KBytes
[  5]  11.01-12.01  sec  2.49 MBytes  20.9 Mbits/sec    7   28.3 KBytes
[  5]  12.01-13.01  sec  6.21 MBytes  52.1 Mbits/sec   14   70.7 KBytes
[  5]  13.01-14.01  sec  8.08 MBytes  67.8 Mbits/sec    2   55.1 KBytes
[  5]  14.01-15.01  sec  17.2 MBytes   144 Mbits/sec   31    102 KBytes
[  5]  15.01-16.01  sec  27.0 MBytes   226 Mbits/sec    5    178 KBytes
[  5]  16.01-17.00  sec  21.3 MBytes   179 Mbits/sec   35    180 KBytes
[  5]  17.00-18.01  sec  26.5 MBytes   221 Mbits/sec    5    164 KBytes
[  5]  18.01-19.01  sec  13.2 MBytes   111 Mbits/sec   21    102 KBytes
[  5]  19.01-20.01  sec  7.52 MBytes  63.1 Mbits/sec    7   62.2 KBytes
[  5]  20.01-21.01  sec  5.65 MBytes  47.4 Mbits/sec    2   56.6 KBytes
[  5]  21.01-22.01  sec  9.32 MBytes  78.2 Mbits/sec   28   91.9 KBytes
[  5]  22.01-23.01  sec  17.8 MBytes   150 Mbits/sec    8   89.1 KBytes
[  5]  23.01-24.01  sec  25.9 MBytes   217 Mbits/sec    0    173 KBytes
[  5]  24.01-25.00  sec  20.1 MBytes   169 Mbits/sec    1    156 KBytes
[  5]  25.00-26.01  sec  19.0 MBytes   159 Mbits/sec    5    165 KBytes
[  5]  26.01-27.01  sec  8.89 MBytes  74.5 Mbits/sec    9    102 KBytes
[  5]  27.01-28.00  sec  28.0 MBytes   235 Mbits/sec    0    182 KBytes
[  5]  28.00-29.00  sec  29.8 MBytes   250 Mbits/sec    5    199 KBytes
[  5]  29.00-30.01  sec  22.3 MBytes   186 Mbits/sec   35    113 KBytes
[  5]  30.01-31.00  sec  27.2 MBytes   229 Mbits/sec    0    185 KBytes
[  5]  31.00-32.00  sec  29.7 MBytes   248 Mbits/sec    5    170 KBytes
[  5]  32.00-33.01  sec  12.1 MBytes   101 Mbits/sec    9   96.2 KBytes
[  5]  33.01-34.01  sec  7.52 MBytes  63.1 Mbits/sec    6   74.9 KBytes
[  5]  34.01-35.01  sec  6.84 MBytes  57.3 Mbits/sec   65   82.0 KBytes
[  5]  35.01-36.00  sec  12.7 MBytes   107 Mbits/sec    2   65.0 KBytes
[  5]  36.00-37.00  sec  23.9 MBytes   200 Mbits/sec    0    154 KBytes
[  5]  37.00-38.01  sec  15.5 MBytes   130 Mbits/sec    1    130 KBytes
[  5]  38.01-39.01  sec  14.9 MBytes   125 Mbits/sec    5    143 KBytes
[  5]  39.01-40.01  sec  8.26 MBytes  69.3 Mbits/sec   10   52.3 KBytes
[  5]  40.01-41.01  sec  9.45 MBytes  79.2 Mbits/sec    2   1.41 KBytes
[  5]  41.01-42.01  sec  12.5 MBytes   105 Mbits/sec   30    105 KBytes
[  5]  42.01-43.01  sec  11.5 MBytes  96.5 Mbits/sec    1    113 KBytes
[  5]  43.01-44.01  sec  6.21 MBytes  52.1 Mbits/sec   52   60.8 KBytes
[  5]  44.01-45.01  sec  24.7 MBytes   207 Mbits/sec    0    156 KBytes
[  5]  45.01-46.00  sec  28.0 MBytes   236 Mbits/sec   12    156 KBytes
[  5]  46.00-47.01  sec  30.0 MBytes   251 Mbits/sec    1    150 KBytes
[  5]  47.01-48.01  sec  16.9 MBytes   142 Mbits/sec   14    109 KBytes
[  5]  48.01-49.01  sec  6.28 MBytes  52.6 Mbits/sec   20   70.7 KBytes
[  5]  49.01-50.01  sec  4.97 MBytes  41.7 Mbits/sec    3   39.6 KBytes
[  5]  50.01-51.01  sec  4.97 MBytes  41.7 Mbits/sec    2   59.4 KBytes
[  5]  51.01-52.01  sec  8.70 MBytes  73.0 Mbits/sec   16   70.7 KBytes
[  5]  52.01-53.00  sec  23.4 MBytes   197 Mbits/sec    0    157 KBytes
[  5]  53.00-54.01  sec  19.5 MBytes   162 Mbits/sec   36    120 KBytes
[  5]  54.01-55.01  sec  12.1 MBytes   101 Mbits/sec   36   91.9 KBytes
[  5]  55.01-56.01  sec  1.86 MBytes  15.6 Mbits/sec   34   22.6 KBytes
[  5]  56.01-57.01  sec  6.21 MBytes  52.1 Mbits/sec    2   29.7 KBytes
[  5]  57.01-58.01  sec  9.94 MBytes  83.4 Mbits/sec    1   80.6 KBytes
[  5]  58.01-59.01  sec  1.86 MBytes  15.6 Mbits/sec    3   26.9 KBytes
[  5]  59.01-60.01  sec  6.84 MBytes  57.3 Mbits/sec   22   48.1 KBytes
[  5]  60.01-61.01  sec  3.73 MBytes  31.3 Mbits/sec   14   32.5 KBytes
[  5]  61.01-62.01  sec  1.86 MBytes  15.6 Mbits/sec    7   24.0 KBytes
[  5]  62.01-63.01  sec  4.97 MBytes  41.7 Mbits/sec    2   32.5 KBytes
[  5]  63.01-64.01  sec  10.6 MBytes  88.6 Mbits/sec    2   83.4 KBytes
[  5]  64.01-65.01  sec  9.45 MBytes  79.2 Mbits/sec   27   86.3 KBytes
[  5]  65.01-66.01  sec  18.1 MBytes   152 Mbits/sec    1    116 KBytes
[  5]  66.01-67.01  sec  20.4 MBytes   172 Mbits/sec    5   93.3 KBytes
[  5]  67.01-68.01  sec  21.6 MBytes   181 Mbits/sec    0    164 KBytes
[  5]  68.01-69.01  sec  15.2 MBytes   127 Mbits/sec   23    132 KBytes
[  5]  69.01-70.01  sec  8.89 MBytes  74.5 Mbits/sec    2   74.9 KBytes
[  5]  70.01-71.01  sec  1.86 MBytes  15.6 Mbits/sec    7   36.8 KBytes
[  5]  71.01-72.01  sec  2.49 MBytes  20.9 Mbits/sec    3   19.8 KBytes
[  5]  72.01-73.01  sec  3.11 MBytes  26.1 Mbits/sec    2   45.2 KBytes
[  5]  73.01-74.01  sec  9.32 MBytes  78.2 Mbits/sec   19   87.7 KBytes
[  5]  74.01-75.01  sec  16.2 MBytes   136 Mbits/sec    1    124 KBytes
[  5]  75.01-76.01  sec  17.8 MBytes   149 Mbits/sec    1    129 KBytes
[  5]  76.01-77.01  sec  18.5 MBytes   155 Mbits/sec    1    105 KBytes
[  5]  77.01-78.01  sec  22.9 MBytes   192 Mbits/sec    0    175 KBytes
[  5]  78.01-79.01  sec  15.0 MBytes   126 Mbits/sec   19    107 KBytes
[  5]  79.01-80.01  sec  14.5 MBytes   122 Mbits/sec   16    122 KBytes
[  5]  80.01-81.01  sec  8.70 MBytes  73.0 Mbits/sec    2   91.9 KBytes
[  5]  81.01-82.01  sec  6.84 MBytes  57.3 Mbits/sec    2   73.5 KBytes
[  5]  82.01-83.01  sec  25.7 MBytes   216 Mbits/sec    0    167 KBytes
[  5]  83.01-84.01  sec  21.3 MBytes   179 Mbits/sec   31    154 KBytes
[  5]  84.01-85.01  sec  18.0 MBytes   151 Mbits/sec   27    139 KBytes
[  5]  85.01-86.01  sec  15.7 MBytes   132 Mbits/sec    1    123 KBytes
[  5]  86.01-87.01  sec  19.7 MBytes   165 Mbits/sec   15    156 KBytes
[  5]  87.01-88.01  sec  31.8 MBytes   267 Mbits/sec    0    225 KBytes
[  5]  88.01-89.01  sec  26.0 MBytes   218 Mbits/sec    5    181 KBytes
[  5]  89.01-90.01  sec  12.7 MBytes   107 Mbits/sec    5    106 KBytes
[  5]  90.01-91.00  sec  17.2 MBytes   145 Mbits/sec   16    136 KBytes
[  5]  91.00-92.01  sec  12.7 MBytes   107 Mbits/sec    6   1.41 KBytes
[  5]  92.01-93.01  sec  7.52 MBytes  63.1 Mbits/sec   23   74.9 KBytes
[  5]  93.01-94.01  sec  13.8 MBytes   116 Mbits/sec    3    109 KBytes
[  5]  94.01-95.01  sec  15.2 MBytes   127 Mbits/sec   17    105 KBytes
[  5]  95.01-96.01  sec  22.7 MBytes   190 Mbits/sec    1    157 KBytes
[  5]  96.01-97.01  sec  7.52 MBytes  63.1 Mbits/sec   21   77.8 KBytes
[  5]  97.01-98.00  sec  16.7 MBytes   140 Mbits/sec    1   93.3 KBytes
[  5]  98.00-99.01  sec  16.6 MBytes   139 Mbits/sec    4    130 KBytes
[  5]  99.01-100.01 sec  10.2 MBytes  85.5 Mbits/sec    2   73.5 KBytes
[  5] 100.01-101.01 sec  6.84 MBytes  57.3 Mbits/sec   26   49.5 KBytes
[  5] 101.01-102.01 sec  13.1 MBytes   110 Mbits/sec    1   74.9 KBytes
[  5] 102.01-103.01 sec  7.46 MBytes  62.6 Mbits/sec    6   49.5 KBytes
[  5] 103.01-104.01 sec  8.08 MBytes  67.8 Mbits/sec    2   62.2 KBytes
[  5] 104.01-105.01 sec  13.9 MBytes   116 Mbits/sec   18    110 KBytes
[  5] 105.01-106.01 sec  27.2 MBytes   228 Mbits/sec    0    189 KBytes
[  5] 106.01-107.00 sec  20.2 MBytes   170 Mbits/sec   19    163 KBytes
[  5] 107.00-108.01 sec  31.8 MBytes   266 Mbits/sec    0    230 KBytes
[  5] 108.01-109.01 sec  34.9 MBytes   292 Mbits/sec    0    286 KBytes
[  5] 109.01-110.01 sec  31.9 MBytes   268 Mbits/sec   36    226 KBytes
[  5] 110.01-111.00 sec  14.4 MBytes   122 Mbits/sec   36    173 KBytes
[  5] 111.00-112.01 sec  8.26 MBytes  68.9 Mbits/sec   25   77.8 KBytes
[  5] 112.01-113.01 sec  4.35 MBytes  36.5 Mbits/sec   25   42.4 KBytes
[  5] 113.01-114.01 sec  1.86 MBytes  15.6 Mbits/sec   18   45.2 KBytes
[  5] 114.01-115.01 sec  10.6 MBytes  88.6 Mbits/sec    6   79.2 KBytes
[  5] 115.01-116.01 sec  15.5 MBytes   130 Mbits/sec    1    124 KBytes
[  5] 116.01-117.01 sec  29.1 MBytes   244 Mbits/sec    0    199 KBytes
[  5] 117.01-118.00 sec  13.9 MBytes   117 Mbits/sec   46   89.1 KBytes
[  5] 118.00-119.01 sec  7.52 MBytes  62.8 Mbits/sec    2   73.5 KBytes
[  5] 119.01-120.01 sec  14.4 MBytes   121 Mbits/sec    1    116 KBytes
[  5] 120.01-121.01 sec  20.6 MBytes   173 Mbits/sec    4   99.0 KBytes
[  5] 121.01-122.01 sec  19.7 MBytes   165 Mbits/sec    1   1.41 KBytes
[  5] 122.01-123.01 sec  8.76 MBytes  73.5 Mbits/sec   21   1.41 KBytes
[  5] 123.01-124.01 sec  13.2 MBytes   111 Mbits/sec    1    107 KBytes
[  5] 124.01-125.01 sec  15.8 MBytes   133 Mbits/sec    1    127 KBytes
[  5] 125.01-126.01 sec  29.4 MBytes   247 Mbits/sec    0    204 KBytes
[  5] 126.01-127.01 sec  22.9 MBytes   192 Mbits/sec    1   1.41 KBytes
[  5] 127.01-128.01 sec  13.8 MBytes   116 Mbits/sec   19   1.41 KBytes
[  5] 128.01-129.01 sec  25.4 MBytes   213 Mbits/sec    0    173 KBytes
[  5] 129.01-130.01 sec  26.2 MBytes   220 Mbits/sec    0    228 KBytes
[  5] 130.01-131.01 sec  20.3 MBytes   171 Mbits/sec    5    180 KBytes
[  5] 131.01-132.01 sec  31.4 MBytes   264 Mbits/sec   27    177 KBytes
[  5] 132.01-133.00 sec  34.0 MBytes   287 Mbits/sec    0    242 KBytes
[  5] 133.00-134.01 sec  23.3 MBytes   194 Mbits/sec    1    173 KBytes
[  5] 134.01-135.01 sec  11.4 MBytes  95.9 Mbits/sec   23    116 KBytes
[  5] 135.01-136.01 sec  11.4 MBytes  95.4 Mbits/sec   11   79.2 KBytes
[  5] 136.01-137.01 sec  26.0 MBytes   218 Mbits/sec    0    167 KBytes
[  5] 137.01-138.01 sec  8.39 MBytes  70.4 Mbits/sec    7   82.0 KBytes
[  5] 138.01-139.01 sec  7.46 MBytes  62.6 Mbits/sec    7   1.41 KBytes
[  5] 139.01-140.01 sec  10.6 MBytes  88.6 Mbits/sec    1   94.7 KBytes
[  5] 140.01-141.01 sec  6.21 MBytes  52.1 Mbits/sec    9   52.3 KBytes
[  5] 141.01-142.01 sec  13.7 MBytes   115 Mbits/sec    1   93.3 KBytes
[  5] 142.01-143.01 sec  5.65 MBytes  47.4 Mbits/sec    6   52.3 KBytes
[  5] 143.01-144.01 sec  6.90 MBytes  57.9 Mbits/sec    2   60.8 KBytes
[  5] 144.01-145.01 sec  10.7 MBytes  89.7 Mbits/sec    2   72.1 KBytes
[  5] 145.01-146.01 sec  8.76 MBytes  73.5 Mbits/sec   22   76.4 KBytes
[  5] 146.01-147.01 sec  15.3 MBytes   128 Mbits/sec    1    124 KBytes
[  5] 147.01-148.01 sec  4.41 MBytes  37.0 Mbits/sec    3   46.7 KBytes
[  5] 148.01-149.01 sec  10.6 MBytes  89.1 Mbits/sec    2   96.2 KBytes
[  5] 149.01-150.01 sec  15.7 MBytes   131 Mbits/sec   26    115 KBytes
[  5] 150.01-151.01 sec  22.2 MBytes   187 Mbits/sec    0    178 KBytes
[  5] 151.01-152.01 sec  9.45 MBytes  79.2 Mbits/sec    2   93.3 KBytes
[  5] 152.01-153.01 sec  8.70 MBytes  73.0 Mbits/sec    2   82.0 KBytes
[  5] 153.01-154.01 sec  4.35 MBytes  36.5 Mbits/sec    6   58.0 KBytes
[  5] 154.01-155.01 sec  1.86 MBytes  15.6 Mbits/sec   19   17.0 KBytes
[  5] 155.01-156.01 sec  5.59 MBytes  46.9 Mbits/sec    2   70.7 KBytes
[  5] 156.01-157.01 sec  7.46 MBytes  62.6 Mbits/sec   18   62.2 KBytes
[  5] 157.01-158.01 sec  6.21 MBytes  52.1 Mbits/sec    2   50.9 KBytes
[  5] 158.01-159.01 sec  13.8 MBytes   116 Mbits/sec    5    110 KBytes
[  5] 159.01-160.01 sec  17.0 MBytes   143 Mbits/sec    6    141 KBytes
[  5] 160.01-161.01 sec  29.8 MBytes   250 Mbits/sec    5    139 KBytes
[  5] 161.01-162.01 sec  30.1 MBytes   253 Mbits/sec    0    209 KBytes
[  5] 162.01-163.01 sec  35.5 MBytes   298 Mbits/sec    0    270 KBytes
[  5] 163.01-164.00 sec  37.5 MBytes   316 Mbits/sec   36    198 KBytes
[  5] 164.00-165.01 sec  10.4 MBytes  86.7 Mbits/sec   30   89.1 KBytes
[  5] 165.01-166.01 sec  3.11 MBytes  26.1 Mbits/sec   23   49.5 KBytes
[  5] 166.01-167.00 sec  23.2 MBytes   195 Mbits/sec    0    147 KBytes
[  5] 167.00-168.01 sec  30.0 MBytes   251 Mbits/sec    1    141 KBytes
[  5] 168.01-169.01 sec  12.7 MBytes   106 Mbits/sec    2   66.5 KBytes
[  5] 169.01-170.01 sec  24.5 MBytes   205 Mbits/sec    0    158 KBytes
[  5] 170.01-171.01 sec  15.3 MBytes   129 Mbits/sec    5    156 KBytes
[  5] 171.01-172.01 sec  12.6 MBytes   106 Mbits/sec   37    110 KBytes
[  5] 172.01-173.01 sec  18.9 MBytes   158 Mbits/sec   36    137 KBytes
[  5] 173.01-174.01 sec  29.9 MBytes   251 Mbits/sec    0    212 KBytes
[  5] 174.01-175.01 sec  12.2 MBytes   103 Mbits/sec    9   72.1 KBytes
[  5] 175.01-176.01 sec  23.8 MBytes   200 Mbits/sec    0    164 KBytes
[  5] 176.01-177.01 sec  9.45 MBytes  79.2 Mbits/sec    1    116 KBytes
[  5] 177.01-178.01 sec  4.97 MBytes  41.7 Mbits/sec   29   60.8 KBytes
[  5] 178.01-179.01 sec  1.24 MBytes  10.4 Mbits/sec    7   28.3 KBytes
[  5] 179.01-180.01 sec  1.24 MBytes  10.4 Mbits/sec    3   28.3 KBytes
[  5] 180.01-181.01 sec  5.59 MBytes  46.9 Mbits/sec    2   60.8 KBytes
[  5] 181.01-182.01 sec  5.59 MBytes  46.9 Mbits/sec    2   50.9 KBytes
[  5] 182.01-183.01 sec  13.8 MBytes   116 Mbits/sec    5    112 KBytes
[  5] 183.01-184.01 sec  12.6 MBytes   105 Mbits/sec   44   76.4 KBytes
[  5] 184.01-185.01 sec  16.9 MBytes   142 Mbits/sec    1    113 KBytes
[  5] 185.01-186.01 sec  5.78 MBytes  48.5 Mbits/sec    4   53.7 KBytes
[  5] 186.01-187.01 sec  3.73 MBytes  31.3 Mbits/sec    3   42.4 KBytes
[  5] 187.01-188.01 sec  10.0 MBytes  83.9 Mbits/sec    1   91.9 KBytes
[  5] 188.01-189.01 sec  4.97 MBytes  41.7 Mbits/sec   24   43.8 KBytes
[  5] 189.01-190.01 sec  10.1 MBytes  84.4 Mbits/sec    6   50.9 KBytes
[  5] 190.01-191.01 sec  8.08 MBytes  67.8 Mbits/sec    2   1.41 KBytes
[  5] 191.01-192.01 sec  20.4 MBytes   171 Mbits/sec    0    134 KBytes
[  5] 192.01-193.01 sec  17.9 MBytes   150 Mbits/sec    1    153 KBytes
[  5] 193.01-194.01 sec  20.3 MBytes   171 Mbits/sec   22    107 KBytes
[  5] 194.01-195.01 sec  6.21 MBytes  52.1 Mbits/sec    6   58.0 KBytes
[  5] 195.01-196.01 sec  4.35 MBytes  36.5 Mbits/sec    4   45.2 KBytes
[  5] 196.01-197.01 sec  8.08 MBytes  67.8 Mbits/sec    2   1.41 KBytes
[  5] 197.01-198.01 sec  3.73 MBytes  31.3 Mbits/sec    2   38.2 KBytes
[  5] 198.01-199.01 sec  9.94 MBytes  83.4 Mbits/sec    2   82.0 KBytes
[  5] 199.01-200.01 sec  17.6 MBytes   148 Mbits/sec    1    107 KBytes
[  5] 200.01-201.01 sec  10.0 MBytes  84.0 Mbits/sec   34   79.2 KBytes
[  5] 201.01-202.00 sec  15.2 MBytes   128 Mbits/sec    1    116 KBytes
[  5] 202.00-203.01 sec  6.34 MBytes  52.9 Mbits/sec    8   72.1 KBytes
[  5] 203.01-204.01 sec  1.24 MBytes  10.4 Mbits/sec   13   31.1 KBytes
[  5] 204.01-205.01 sec  1.86 MBytes  15.6 Mbits/sec    3   33.9 KBytes
[  5] 205.01-206.01 sec  4.97 MBytes  41.7 Mbits/sec    3   25.5 KBytes
[  5] 206.01-207.01 sec  6.84 MBytes  57.3 Mbits/sec    2   53.7 KBytes
[  5] 207.01-208.01 sec  10.6 MBytes  88.6 Mbits/sec   11   77.8 KBytes
[  5] 208.01-209.01 sec  17.5 MBytes   147 Mbits/sec    5    130 KBytes
[  5] 209.01-210.01 sec  17.6 MBytes   148 Mbits/sec    1    120 KBytes
[  5] 210.01-211.01 sec  16.0 MBytes   134 Mbits/sec    5    122 KBytes
[  5] 211.01-212.01 sec  13.9 MBytes   116 Mbits/sec   26    103 KBytes
[  5] 212.01-213.01 sec  20.4 MBytes   171 Mbits/sec    1    100 KBytes
[  5] 213.01-214.01 sec  12.8 MBytes   107 Mbits/sec    1    106 KBytes
[  5] 214.01-215.00 sec  12.6 MBytes   106 Mbits/sec    6    109 KBytes
[  5] 215.00-216.01 sec  18.3 MBytes   153 Mbits/sec   25    127 KBytes
[  5] 216.01-217.01 sec  18.3 MBytes   153 Mbits/sec   17    147 KBytes
[  5] 217.01-218.01 sec  23.0 MBytes   193 Mbits/sec    0    201 KBytes
[  5] 218.01-219.00 sec  26.3 MBytes   222 Mbits/sec   36    195 KBytes
[  5] 219.00-220.01 sec  20.5 MBytes   171 Mbits/sec    6   32.5 KBytes
[  5] 220.01-221.01 sec  14.3 MBytes   120 Mbits/sec    1    113 KBytes
[  5] 221.01-222.01 sec  3.11 MBytes  26.1 Mbits/sec   61   45.2 KBytes
[  5] 222.01-223.01 sec  4.35 MBytes  36.5 Mbits/sec    3   41.0 KBytes
[  5] 223.01-224.01 sec  15.0 MBytes   126 Mbits/sec    1   80.6 KBytes
[  5] 224.01-225.01 sec  8.82 MBytes  74.0 Mbits/sec    6   58.0 KBytes
[  5] 225.01-226.00 sec  24.0 MBytes   203 Mbits/sec    0    151 KBytes
[  5] 226.00-227.01 sec  29.1 MBytes   243 Mbits/sec    5    157 KBytes
[  5] 227.01-228.01 sec  14.8 MBytes   124 Mbits/sec   32   1.41 KBytes
[  5] 228.01-229.01 sec  15.1 MBytes   127 Mbits/sec   29   97.6 KBytes
[  5] 229.01-230.01 sec  28.9 MBytes   242 Mbits/sec   39    482 KBytes
[  5] 230.01-231.01 sec  47.3 MBytes   396 Mbits/sec    0    550 KBytes
[  5] 231.01-232.01 sec  45.9 MBytes   385 Mbits/sec   10    413 KBytes
[  5] 232.01-233.01 sec  44.8 MBytes   376 Mbits/sec    0    450 KBytes
[  5] 233.01-234.01 sec  39.0 MBytes   327 Mbits/sec   59    233 KBytes
[  5] 234.01-235.01 sec  34.1 MBytes   286 Mbits/sec   36    206 KBytes
[  5] 235.01-236.01 sec  16.9 MBytes   142 Mbits/sec   36    182 KBytes
[  5] 236.01-237.01 sec  5.90 MBytes  49.5 Mbits/sec   29    144 KBytes
[  5] 237.01-238.01 sec  31.1 MBytes   261 Mbits/sec    0    216 KBytes
[  5] 238.01-239.00 sec  19.4 MBytes   163 Mbits/sec   39   99.0 KBytes
[  5] 239.00-240.00 sec  17.0 MBytes   142 Mbits/sec    1    120 KBytes
[  5] 240.00-241.00 sec  28.6 MBytes   241 Mbits/sec    0    198 KBytes
[  5] 241.00-242.01 sec  20.4 MBytes   170 Mbits/sec    2    102 KBytes
[  5] 242.01-243.00 sec  9.20 MBytes  77.6 Mbits/sec   36   72.1 KBytes
[  5] 243.00-244.01 sec  13.5 MBytes   113 Mbits/sec    8    102 KBytes
[  5] 244.01-245.00 sec  28.3 MBytes   238 Mbits/sec    0    182 KBytes
[  5] 245.00-246.01 sec  20.1 MBytes   168 Mbits/sec   27    164 KBytes
[  5] 246.01-247.00 sec  21.4 MBytes   180 Mbits/sec   28    163 KBytes
[  5] 247.00-248.01 sec  31.7 MBytes   265 Mbits/sec    0    229 KBytes
[  5] 248.01-249.01 sec  37.7 MBytes   316 Mbits/sec    0    287 KBytes
[  5] 249.01-250.01 sec  39.2 MBytes   329 Mbits/sec    0    335 KBytes
[  5] 250.01-251.01 sec  43.2 MBytes   362 Mbits/sec    0    382 KBytes
[  5] 251.01-252.01 sec  44.7 MBytes   376 Mbits/sec    0    423 KBytes
[  5] 252.01-253.01 sec  43.3 MBytes   363 Mbits/sec   36    298 KBytes
[  5] 253.01-254.01 sec  41.0 MBytes   344 Mbits/sec    0    344 KBytes
[  5] 254.01-255.01 sec  36.0 MBytes   302 Mbits/sec   36    286 KBytes
[  5] 255.01-256.01 sec  37.8 MBytes   317 Mbits/sec    0    334 KBytes
[  5] 256.01-257.01 sec  40.1 MBytes   337 Mbits/sec   31    173 KBytes
[  5] 257.01-258.01 sec  20.2 MBytes   169 Mbits/sec    0    218 KBytes
[  5] 258.01-259.01 sec  18.3 MBytes   153 Mbits/sec   38    137 KBytes
[  5] 259.01-260.01 sec  7.83 MBytes  65.7 Mbits/sec   29   67.9 KBytes
[  5] 260.01-261.01 sec  11.4 MBytes  95.9 Mbits/sec   24    103 KBytes
[  5] 261.01-262.01 sec  10.8 MBytes  90.7 Mbits/sec    6   77.8 KBytes
[  5] 262.01-263.01 sec  16.8 MBytes   141 Mbits/sec    8    100 KBytes
[  5] 263.01-264.01 sec  18.0 MBytes   151 Mbits/sec    8    107 KBytes
[  5] 264.01-265.01 sec  28.0 MBytes   235 Mbits/sec    0    188 KBytes
[  5] 265.01-266.01 sec  15.0 MBytes   126 Mbits/sec   34    158 KBytes
[  5] 266.01-267.01 sec  20.5 MBytes   172 Mbits/sec    1    143 KBytes
[  5] 267.01-268.01 sec  17.2 MBytes   144 Mbits/sec   30    132 KBytes
[  5] 268.01-269.01 sec  29.1 MBytes   244 Mbits/sec    1    137 KBytes
[  5] 269.01-270.00 sec  29.8 MBytes   251 Mbits/sec    0    206 KBytes
[  5] 270.00-271.01 sec  28.7 MBytes   240 Mbits/sec    5    182 KBytes
[  5] 271.01-272.01 sec  33.1 MBytes   278 Mbits/sec    0    245 KBytes
[  5] 272.01-273.00 sec  30.8 MBytes   259 Mbits/sec   37    218 KBytes
[  5] 273.00-274.00 sec  34.1 MBytes   285 Mbits/sec    0    273 KBytes
[  5] 274.00-275.01 sec  37.3 MBytes   312 Mbits/sec   37    228 KBytes
[  5] 275.01-276.01 sec  34.9 MBytes   292 Mbits/sec    0    279 KBytes
[  5] 276.01-277.01 sec  20.3 MBytes   170 Mbits/sec   39    143 KBytes
[  5] 277.01-278.01 sec  11.1 MBytes  93.3 Mbits/sec    5   93.3 KBytes
[  5] 278.01-279.01 sec  21.3 MBytes   179 Mbits/sec    0    163 KBytes
[  5] 279.01-280.01 sec  7.08 MBytes  59.4 Mbits/sec   39   56.6 KBytes
[  5] 280.01-281.01 sec  14.7 MBytes   124 Mbits/sec    1   79.2 KBytes
[  5] 281.01-282.01 sec  24.7 MBytes   207 Mbits/sec    0    163 KBytes
[  5] 282.01-283.01 sec  30.6 MBytes   257 Mbits/sec    0    228 KBytes
[  5] 283.01-284.00 sec  34.5 MBytes   291 Mbits/sec   30    173 KBytes
[  5] 284.00-285.01 sec  24.9 MBytes   208 Mbits/sec    1    177 KBytes
[  5] 285.01-286.01 sec  32.7 MBytes   274 Mbits/sec    0    242 KBytes
[  5] 286.01-287.00 sec  18.3 MBytes   154 Mbits/sec   36    164 KBytes
[  5] 287.00-288.01 sec  17.9 MBytes   149 Mbits/sec   36    141 KBytes
[  5] 288.01-289.01 sec  22.9 MBytes   192 Mbits/sec    3    157 KBytes
[  5] 289.01-290.01 sec  23.3 MBytes   195 Mbits/sec    5    177 KBytes
[  5] 290.01-291.01 sec  21.6 MBytes   181 Mbits/sec    1   1.41 KBytes
[  5] 291.01-292.01 sec  7.02 MBytes  58.9 Mbits/sec   51   94.7 KBytes
[  5] 292.01-293.01 sec  3.42 MBytes  28.7 Mbits/sec    8   35.4 KBytes
[  5] 293.01-294.01 sec  3.42 MBytes  28.7 Mbits/sec    5   45.2 KBytes
[  5] 294.01-295.01 sec  4.23 MBytes  35.4 Mbits/sec   11   31.1 KBytes
[  5] 295.01-296.01 sec  11.9 MBytes   100 Mbits/sec    8    103 KBytes
[  5] 296.01-297.01 sec  6.21 MBytes  52.1 Mbits/sec   29   39.6 KBytes
[  5] 297.01-298.01 sec  2.73 MBytes  22.9 Mbits/sec   16   26.9 KBytes
[  5] 298.01-299.01 sec  1.37 MBytes  11.5 Mbits/sec    3   18.4 KBytes
[  5] 299.01-300.00 sec  2.05 MBytes  17.2 Mbits/sec    3   31.1 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-300.00 sec  4.90 GBytes   140 Mbits/sec  3702             sender
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------

 
spitkia
just joined
Posts: 1
Joined: Tue Apr 17, 2018 4:03 pm

Re: v6.42 [current]

Tue Apr 17, 2018 4:10 pm

RB951Ui-2HnD. After the upgrade to 6.42, the first port does not work
 
jrpaz
Frequent Visitor
Frequent Visitor
Posts: 76
Joined: Wed Jun 05, 2013 5:54 am

Re: v6.42 [current]

Tue Apr 17, 2018 4:11 pm

No improvement on the hAP ac^2. Similar results to the ones above.
 
WirelessRudy
Forum Guru
Forum Guru
Posts: 3069
Joined: Tue Aug 08, 2006 5:54 pm
Location: Spain

Re: v6.42 [current]

Tue Apr 17, 2018 4:14 pm

*) userman - added support for ARM and MMIPS platform;

Previous versions don't support for these? What actually was not supported? We have one LHG-5ac that is in bridge mode but its UM assigned authentication is coming and going....
/interface bridge
add admin-mac=E4:8D:8C:53:5A:9B auto-mac=no fast-forward=no name=bridge1
/interface bridge port
add bridge=bridge1 interface=wlan1
add bridge=bridge1 interface=ether1-local
/interface pppoe-client
add add-default-route=yes disabled=no interface=bridge1 keepalive-timeout=60 max-mru=1500 max-mtu=1500 name=pppoe-out1 service-name=internet use-peer-dns=yes \
    user="**************************"
"************" is actually real name...
/interface pppoe-client> pr
Flags: X - disabled, I - invalid, R - running 
 0  R name="pppoe-out1" max-mtu=1500 max-mru=1500 mrru=disabled interface=bridge1 user="************************" password="" profile=default 
      keepalive-timeout=60 service-name="internet" ac-name="" add-default-route=yes default-route-distance=1 dial-on-demand=no use-peer-dns=yes 
      allow=pap,chap,mschap1,mschap2
When we make a telnet to this router we see the client getting its assigned IP.
 /ip address> pr
Flags: X - disabled, I - invalid, D - dynamic 
 #   ADDRESS            NETWORK         INTERFACE                                                                                                                 
 0 D 192.168.226.80/24  192.168.226.0   vlan2_Gestion_P2MP                                                                                                        
 1 D 192.168.201.210/32 192.168.200.1   pppoe-out1 
It also creates the gw
/ip route> pr
Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, B - blackhole, U - unreachable, P - prohibit 
 #      DST-ADDRESS        PREF-SRC        GATEWAY            DISTANCE
 0 ADS  0.0.0.0/0                          pppoe-out1                1
 1  DS  0.0.0.0/0                          192.168.226.1             2
 2 ADC  192.168.200.1/32   192.168.201.210 pppoe-out1                0
 3 ADC  192.168.226.0/24   192.168.226.80  vlan2_Gestion_P2MP        0
We had 6.42rc37 installed when the problem was noticed (We needed this version to have the 'arm' radio to connect anyway....
We managed to update it via de management network to 6.42 current
But the issue is still there.

We have several 'arm' units running with pppoe-clients but the pppoe client sits usually on the wlan1 interface. In this case it is on the bridge.

Anybody any suggestions?
Last edited by WirelessRudy on Tue Apr 17, 2018 4:17 pm, edited 1 time in total.
Show your appreciation of this post by giving me Karma! Thanks.

Rudy R. Puister

WISP operator based on MT routerboard & ROS.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 23946
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.42 [current]

Tue Apr 17, 2018 4:17 pm

Previously you could not install User Manager server on ARM systems at all.
No answer to your question? How to write posts
 
kowal
just joined
Posts: 5
Joined: Sun Jul 06, 2014 2:23 am

Re: v6.42 [current]

Tue Apr 17, 2018 4:18 pm

Hi,

After upgrade, on hAP ac2 and cAP ac I see strange channel options, XXX :)
In CLI:
[admin@KowalCAP] > /int wire set 1 channel-width=
ChannelWidth ::= 10mhz | 20/40/80/160mhz-Ceeeeeee | 20/40/80/160mhz-XXXXXXXX | 20/40/80/160mhz-eCeeeeee | 20/40/80/160mhz-eeCeeeee | ...
[admin@KowalCAP] > /int wire set 1 channel-width=
Winbox:
Image


I also installed 6.42 on friend's hAP ac^2, previously on 6.41.4 on 5GHz-AC with laptop card Intel DualBand 8260 has transfer 8-14 Mbit... Waiting for results. On TP-Link T4UH v1 (RTL8812AU chipset) I have transfers about 130 - 150 Mbit/s.
After work I will check performance with cAP ac and TP-Link T4UH.
Last edited by kowal on Tue Apr 17, 2018 4:29 pm, edited 1 time in total.
 
R1CH
Forum Veteran
Forum Veteran
Posts: 861
Joined: Sun Oct 01, 2006 11:44 pm

Re: v6.42 [current]

Tue Apr 17, 2018 4:20 pm

Upgraded a bunch of hEX r3, wAP AC and hAP AC (original) with no issues. Holding off on the CCR-1009 for a bit.
 
kez
newbie
Posts: 39
Joined: Tue Jul 05, 2005 4:13 am

Re: v6.42 [current]

Tue Apr 17, 2018 4:31 pm

Thanks for another great update.
How about this feature released at 6.42rc52?

*) chr - added support for "multi-queue" feature for "virtio-net" drivers

There is no mention on 6.42 changelog and it's a feature I've been waiting for.
Thanks again!
 
Redmor
Member Candidate
Member Candidate
Posts: 248
Joined: Wed May 31, 2017 7:40 pm
Location: Italy

Re: v6.42 [current]

Tue Apr 17, 2018 4:42 pm

I can't see any improvement in Nv2 PTMP, someone have some tests and can share AP and client configuration?
ImageImage
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 23946
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v6.42 [current]

Tue Apr 17, 2018 4:44 pm

I can't see any improvement on Nv2 PTMP, someone have some tests and can share AP and client configuration?
did you upgrade AP and stations, or only AP ?
No answer to your question? How to write posts
 
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1395
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.42 [current]

Tue Apr 17, 2018 5:00 pm

nin - Detect Internet was just a guess. We will look into the problem through support ticket and let you know about the findings. Please provide supout files from both devices within an e-mail to support@mikrotik.com.
squeeze - Currently there is no RouterBOARD with such built-in wireless functionality.
zilf - We will look into this problem. Are you sure that 6.41.4 did not have such problem?
yhfung,jrpaz - We are still working on improvements. Hopefully we will provide improvements as soon as possible within 6.43rc version.
spitkia - Do you mean that there is no link on ether1 which was working fine on 6.41.4? Please generate supout file on your router while ether1 is connected to other device but link is not established. Send this file to support@mikrotik.com.
kez - More improvements regarding this feature will be implemented within 6.43rc version.
Redmor - In order to see improvements you must upgrade AP devices. Please note that in most cases you can see the difference only, if there are more than 10 stations connected (number can vary, it can be more and it can be less than 10).
 
User avatar
zilf
just joined
Posts: 7
Joined: Fri Jul 22, 2016 4:06 pm
Location: Ukraine

Re: v6.42 [current]

Tue Apr 17, 2018 5:05 pm

zilf - We will look into this problem. Are you sure that 6.41.4 did not have such problem?
I did not install 6.41.4, but on 6.41.3 did not have such problem
 
nin
just joined
Posts: 22
Joined: Sat Feb 20, 2010 9:02 pm

Re: v6.42 [current]

Tue Apr 17, 2018 5:13 pm

nin - Detect Internet was just a guess. We will look into the problem through support ticket and let you know about the findings. Please provide supout files from both devices within an e-mail to support@mikrotik.com.
Strods,

wow you support is fast! Your Sergejs B. already helped me!

For some reason i cannot explain at all, I had this line in my RB450G (switch) configuration which certainly is completely obsolete.
/ip dhcp-client add dhcp-options=hostname,clientid disabled=no interface=bridge1
After removing the client entry, no problems anymore.
Whether it was sitting there all the time or not I cannot say. However I have used many months ago the quickset for a switch configuration and I never had changed this very simply setup...


Cheers nin!
 
planetcaravan
Member Candidate
Member Candidate
Posts: 254
Joined: Tue Aug 25, 2009 5:33 pm

Re: v6.42 [current]

Tue Apr 17, 2018 5:40 pm

Hi,

what is the detail of this update:
*) wireless - improved Nv2 PtMP performance;


Does it involve also AC standard?
Does it require the NV security?
 
silenceleaf
just joined
Posts: 7
Joined: Tue Apr 17, 2018 3:57 am

Re: v6.42 [current]

Tue Apr 17, 2018 5:47 pm

Same as most post hAP ac2 has extreme poor performance after even update to 6.42. 5G wifi has 130Mbps only and very unstable.
 
eddieb
Member Candidate
Member Candidate
Posts: 123
Joined: Thu Aug 28, 2014 10:53 am
Location: Netherlands

Re: v6.42 [current]

Tue Apr 17, 2018 5:51 pm

Updated RB1100, RB2011, CRS125, RB962 (hAP AC) (5x) without any issues, 2.4G/5G wifi work as expected, thanks !
Running 6.44.3 (stable) on :
CCR1009-8G-1S (2x ipsec/l2tp site-to-site, ipsec/l2tp roadwarrior, dhcpd, dns), CRS125-24G-1S, RB1100, RB962UiGS-5HacT2HnT (10pc),
RB951, RB750GL ,RB2011UAS-RM, CHR running dude (CHR running in VirtualBox on OSX)
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2265
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: v6.42 [current]

Tue Apr 17, 2018 5:59 pm

Hi,
what is the detail of this update:
*) wireless - improved Nv2 PtMP performance;
Does it involve also AC standard?
Does it require the NV security?
viewtopic.php?f=21&t=132181#p649247
LAN, FTTx, Wireless. ISP operator
 
User avatar
ErfanDL
Member Candidate
Member Candidate
Posts: 264
Joined: Thu Sep 29, 2016 9:13 am
Location: IRAN
Contact:

Re: v6.42 [current]

Tue Apr 17, 2018 6:08 pm

Upgrade RB951Ui-2hND - RB2011UiAS2hND - hAP Lite. without any issue
 
xavierbt
newbie
Posts: 40
Joined: Thu Jan 22, 2015 11:55 am

Re: v6.42 [current]

Tue Apr 17, 2018 6:14 pm

RouterOS version 6.42 has been released in public "current" channel!

*) wireless - fixed incompatibility with macOS clients;

Please, could you detail a bit more?
Thank you

xavier
 
Redmor
Member Candidate
Member Candidate
Posts: 248
Joined: Wed May 31, 2017 7:40 pm
Location: Italy

Re: v6.42 [current]

Tue Apr 17, 2018 6:16 pm

Redmor - In order to see improvements you must upgrade AP devices. Please note that in most cases you can see the difference only, if there are more than 10 stations connected (number can vary, it can be more and it can be less than 10).
What do you mean with "upgrade", isn't 6.42 enough? I have to upgrade Routerboard's firmware?
I also have to upgrade clients to 6.42 and also RB firmware?
ImageImage
 
R1st0
just joined
Posts: 6
Joined: Wed Feb 14, 2018 10:08 am

Re: v6.42 [current]

Tue Apr 17, 2018 6:29 pm

crs3xx - added “hw-offload” support for 802.3ad

Will there be hw-offload support for QnQ anytime soon?
 
MartijnVdS
Frequent Visitor
Frequent Visitor
Posts: 93
Joined: Wed Aug 13, 2014 9:36 am

Re: v6.42 [current]

Tue Apr 17, 2018 7:51 pm

RouterOS version 6.42 has been released in public "current" channel!

*) wireless - fixed incompatibility with macOS clients;

Please, could you detail a bit more?
Thank you

xavier
viewtopic.php?f=7&t=129616

(I presume)
 
bbs2web
Member Candidate
Member Candidate
Posts: 192
Joined: Sun Apr 22, 2012 6:25 pm
Location: Johannesburg, South Africa
Contact:

Re: v6.42 [current]

Tue Apr 17, 2018 9:18 pm

Hi strods,

VirtIO multI-queue does not actually work on 6.42rc56. I've sent an email to support and posted information in the 6.42rc56 discussion forum, hope this is easily fixed by RouterOS calling ethtool to actually enable multi-queue.

Information available here:
viewtopic.php?f=21&t=129034&start=500#p653844
kez - More improvements regarding this feature will be implemented within 6.43rc version.
 
deividask
just joined
Posts: 6
Joined: Wed Sep 13, 2017 2:52 pm

Re: v6.42 [current]

Tue Apr 17, 2018 9:20 pm

Hi,

After upgrading from 6.41.3, RB850Gx2 started rebooting in a loop, reseting did help but only after 4th time, and still wasn't able to restore from backup, restoring from backup it started rebooting again.

with 6.41.4 IPTV (multicast) traffic started glitching, I had to switch back to 6.41.3...
 
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1395
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.42 [current]

Tue Apr 17, 2018 9:30 pm

deividask - Please send supout file from your router to support@mikrotik.com. If you can reproduce the crash constantly, then we should be able to do the same and resolve issue quickly. Please also include description of your network traffic.
 
mszru
just joined
Posts: 12
Joined: Wed Aug 10, 2016 10:42 am

Re: v6.42 [current]

Tue Apr 17, 2018 9:36 pm

RB850Gx2. After upgrade ROS to 6.42 does not show Tx rate when used Torch.
Image

I face the same issue on hAP ac (RB962).
In my case Tx Rate is always zero for ethernet interfaces added to the bridge with hardware offloading enabled. Disabling hardware offloading for the bridge port fixes the issue, but you get another one - no hw offloading :)
 
User avatar
hknet
Frequent Visitor
Frequent Visitor
Posts: 87
Joined: Sun Jul 17, 2016 6:05 pm
Location: Vienna, Austria
Contact:

Re: v6.42 [current]

Tue Apr 17, 2018 10:20 pm

it seems we lost packet fragmentation for EoIPs connecting bridges between two MTs we no longer can transport big pppoe-frames there; was working with 6.41.4
 
bbs2web
Member Candidate
Member Candidate
Posts: 192
Joined: Sun Apr 22, 2012 6:25 pm
Location: Johannesburg, South Africa
Contact:

Re: v6.42 [current]

Wed Apr 18, 2018 12:59 am

RouterOS 6.42 does appear to include the VirtIO multi-queue driver but I assume information may have purposefully been left out of the change logs due to it not actually working. We left RPS enabled to distribute the IRQ events on the first queue to the various cores:

Image
Hi strods,

VirtIO multI-queue does not actually work on 6.42rc56. I've sent an email to support and posted information in the 6.42rc56 discussion forum, hope this is easily fixed by RouterOS calling ethtool to actually enable multi-queue.

Information available here:
viewtopic.php?f=21&t=129034&start=500#p653844
kez - More improvements regarding this feature will be implemented within 6.43rc version.
 
Spirch
newbie
Posts: 43
Joined: Sat May 03, 2014 5:04 am

Re: v6.42 [current]

Wed Apr 18, 2018 5:56 am

WIFI on the cAP ac is WAY better, i dont need to update my hAP ac2 for now since the wifi on it only turn on when the hAP is down and that shouldn't happen often or never

if you can tweak it more, that would be nice but for now this local speed is more than my internet which is all i can ask for now

(the hAP got very very basic config, mostly a bridge and just a dhcp-relay by lan to my cAP)
D:\Download\Benchmark\iperf-3.1.3-win64>iperf3.exe -s -i 5 -V -d
iperf 3.1.3
CYGWIN_NT-6.1 Win7-PC 2.5.1(0.297/5/3) 2016-04-21 22:14 x86_64
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
get_parameters:
{
"tcp": true,
"omit": 0,
"num": 5120000000,
"parallel": 1,
"len": 131072
}
Time: Wed, 18 Apr 2018 02:42:23 GMT
Accepted connection from ****, port 42972
Cookie: ****
TCP MSS: 0 (default)
[ 5] local **** port 5201 connected to **** port 42973
Starting Test: protocol: TCP, 1 streams, 131072 byte blocks, omitting 0 seconds, 5120000000 bytes to send
[ ID] Interval Transfer Bandwidth
[ 5] 0.00-5.00 sec 111 MBytes 186 Mbits/sec
[ 5] 5.00-10.00 sec 113 MBytes 189 Mbits/sec
[ 5] 10.00-15.00 sec 113 MBytes 190 Mbits/sec
[ 5] 15.00-20.00 sec 114 MBytes 191 Mbits/sec
[ 5] 20.00-25.00 sec 112 MBytes 188 Mbits/sec
[ 5] 25.00-30.00 sec 115 MBytes 193 Mbits/sec
[ 5] 30.00-35.00 sec 113 MBytes 190 Mbits/sec
[ 5] 35.00-40.00 sec 112 MBytes 189 Mbits/sec
[ 5] 40.00-45.00 sec 107 MBytes 180 Mbits/sec
[ 5] 45.00-50.00 sec 114 MBytes 191 Mbits/sec
[ 5] 50.00-55.00 sec 116 MBytes 194 Mbits/sec
[ 5] 55.00-60.00 sec 115 MBytes 193 Mbits/sec
[ 5] 60.00-65.00 sec 110 MBytes 184 Mbits/sec
[ 5] 65.00-70.00 sec 91.7 MBytes 154 Mbits/sec
[ 5] 70.00-75.00 sec 106 MBytes 177 Mbits/sec
[ 5] 75.00-80.00 sec 107 MBytes 180 Mbits/sec
[ 5] 80.00-85.00 sec 103 MBytes 172 Mbits/sec
[ 5] 85.00-90.00 sec 108 MBytes 180 Mbits/sec
[ 5] 90.00-95.00 sec 106 MBytes 178 Mbits/sec
[ 5] 95.00-100.00 sec 105 MBytes 177 Mbits/sec
[ 5] 100.00-105.00 sec 98.4 MBytes 165 Mbits/sec
[ 5] 105.00-110.00 sec 95.2 MBytes 160 Mbits/sec
[ 5] 110.00-115.00 sec 104 MBytes 174 Mbits/sec
[ 5] 115.00-120.00 sec 101 MBytes 170 Mbits/sec
[ 5] 120.00-125.00 sec 103 MBytes 172 Mbits/sec
[ 5] 125.00-130.00 sec 106 MBytes 178 Mbits/sec
[ 5] 130.00-135.00 sec 106 MBytes 177 Mbits/sec
[ 5] 135.00-140.00 sec 104 MBytes 175 Mbits/sec
[ 5] 140.00-145.00 sec 104 MBytes 175 Mbits/sec
[ 5] 145.00-150.00 sec 104 MBytes 174 Mbits/sec
[ 5] 150.00-155.00 sec 103 MBytes 173 Mbits/sec
[ 5] 155.00-160.00 sec 103 MBytes 173 Mbits/sec
[ 5] 160.00-165.00 sec 89.2 MBytes 150 Mbits/sec
[ 5] 165.00-170.00 sec 90.6 MBytes 152 Mbits/sec
[ 5] 170.00-175.00 sec 70.2 MBytes 118 Mbits/sec
[ 5] 175.00-180.00 sec 90.4 MBytes 152 Mbits/sec
[ 5] 180.00-185.00 sec 107 MBytes 179 Mbits/sec
[ 5] 185.00-190.00 sec 105 MBytes 176 Mbits/sec
[ 5] 190.00-195.00 sec 92.0 MBytes 154 Mbits/sec
[ 5] 195.00-200.00 sec 105 MBytes 177 Mbits/sec
[ 5] 200.00-205.00 sec 105 MBytes 177 Mbits/sec
[ 5] 205.00-210.00 sec 91.3 MBytes 153 Mbits/sec
[ 5] 210.00-215.00 sec 104 MBytes 174 Mbits/sec
[ 5] 215.00-220.00 sec 108 MBytes 182 Mbits/sec
[ 5] 220.00-225.00 sec 103 MBytes 173 Mbits/sec
[ 5] 225.00-230.00 sec 91.8 MBytes 154 Mbits/sec
[ 5] 230.00-235.00 sec 105 MBytes 176 Mbits/sec
[ 5] 235.00-235.15 sec 2.93 MBytes 168 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
Test Complete. Summary Results:
[ ID] Interval Transfer Bandwidth
[ 5] 0.00-235.15 sec 0.00 Bytes 0.00 bits/sec sender
[ 5] 0.00-235.15 sec 4.77 GBytes 174 Mbits/sec receiver
CPU Utilization: local/receiver 20.1% (6.1%u/14.0%s), remote/sender 0.0% (0.0%u/0.0%s)
get_results
{
"cpu_util_total": 37.142600,
"cpu_util_user": 0.815528,
"cpu_util_system": 36.329200,
"sender_has_retransmits": 0,
"streams": [{
"id": 1,
"bytes": 5120111392,
"retransmits": -1,
"jitter": 0,
"errors": 0,
"packets": 0
}]
}
send_results
{
"cpu_util_total": 20.074440,
"cpu_util_user": 6.058271,
"cpu_util_system": 14.016169,
"sender_has_retransmits": -1,
"streams": [{
"id": 1,
"bytes": 5119705644,
"retransmits": -1,
"jitter": 0,
"errors": 0,
"packets": 0
}]
}
 
yhfung
Member Candidate
Member Candidate
Posts: 142
Joined: Tue Nov 20, 2012 6:58 pm

Re: v6.42 [current]

Wed Apr 18, 2018 6:51 am


yhfung,jrpaz - We are still working on improvements. Hopefully we will provide improvements as soon as possible within 6.43rc version.
strods,

Please ignore the following post since I am able to get better reset after a hardware reset when the unit is no longer accessible by winbox. Now the unit is back to normal and I shall carry out the following tests.

=======================
Thank your reply for our problems encountered. In the past, we put our time on the ac, we did not put much time on 2.4GHz performance. In this morning, I would like to performance the complete test including 2.4GHz, I found that the performance was very very bad that I could not use it to edit post on MikroTik Forum.

For details, please take a look at other post that was written by within this Forum as follows:

viewtopic.php?f=7&t=132648&start=50#p654964
 
jarda
Forum Guru
Forum Guru
Posts: 7575
Joined: Mon Oct 22, 2012 4:46 pm

Re: v6.42 [current]

Wed Apr 18, 2018 7:15 am

Yep. My tests says that the hap ac2 is able to fluctuate around 40-100Mbits over ac with terrible ccq while the signal levels are good and band clear. Still nothing to be happy of.
 
User avatar
amt
Long time Member
Long time Member
Posts: 520
Joined: Fri Jan 16, 2015 2:05 pm

Re: v6.42 [current]

Wed Apr 18, 2018 8:06 am

Updated SXT Lite5 Ac from 6.40.5 to 6.42 and device down, After netinstall device work again...
 
yhfung
Member Candidate
Member Candidate
Posts: 142
Joined: Tue Nov 20, 2012 6:58 pm

Re: v6.42 [current]

Wed Apr 18, 2018 8:33 am

After have hardware reset my unit, I repeated the tests on 2.4GHz and 5GHz bands. The results are

The download speed for 2.4GHz is 55Mbps, Retr=1481.
The download speed for 5GHz is 124Mbps, Retr=6418.

The target for 2.4GHz for n is 200Mbps with zero count in Retr
The target for 5GHz for ac is 500Mbps with zero count in Retr.

For details, please see the following link:

viewtopic.php?f=7&t=132648&p=654976#p654976
 
alibalalo
newbie
Posts: 48
Joined: Wed Feb 18, 2015 10:48 pm

Re: v6.42 [current]

Wed Apr 18, 2018 9:22 am

*) winbox - added 160 MHz "channel-width" to wireless settings;

What Mikrotik devices support 160 MHz channel WiFi?
Please tell us what devices support this addition
 
User avatar
ErfanDL
Member Candidate
Member Candidate
Posts: 264
Joined: Thu Sep 29, 2016 9:13 am
Location: IRAN
Contact:

Re: v6.42 [current]

Wed Apr 18, 2018 9:38 am

after upgrade to 6.42 on RB2011: can not show PPPOE Client on LCD. show interface as unknown ! and can not remove unknown interface

Image
 
User avatar
zilf
just joined
Posts: 7
Joined: Fri Jul 22, 2016 4:06 pm
Location: Ukraine

Re: v6.42 [current]

Wed Apr 18, 2018 9:56 am

RB850Gx2. After upgrade ROS to 6.42 does not show Tx rate when used Torch.
Image
I face the same issue on hAP ac^2 too.
 
mattjhaigh
just joined
Posts: 12
Joined: Sun Aug 14, 2011 9:29 am

Re: v6.42 [current]

Wed Apr 18, 2018 10:45 am

Install and upgrade via packages menu option crashed my 3011. Anyone else have issues. Now in constant boot loop. Cannot launch kernel. Any recommended next steps ?
 
Kindis
Member Candidate
Member Candidate
Posts: 239
Joined: Tue Nov 01, 2011 6:54 pm

Re: v6.42 [current]

Wed Apr 18, 2018 10:52 am

Install and upgrade via packages menu option crashed my 3011. Anyone else have issues. Now in constant boot loop. Cannot launch kernel. Any recommended next steps ?
I have updated two 3011 without issues. My guess is netinstall for you.
from which version did you upgrade? I want from 6.41.4
 
Simono
newbie
Posts: 49
Joined: Tue Mar 20, 2018 9:41 am

Re: v6.42 [current]

Wed Apr 18, 2018 11:13 am

Guys what this means:
*) capsman - added support for "interface-list" in Access List and Datapath entries;
 
nuffrespect
newbie
Posts: 29
Joined: Wed Jun 14, 2017 5:21 pm

Re: v6.42 [current]

Wed Apr 18, 2018 11:20 am

Hi, updates to 6.42 without any problems from different versions 6.41--6.41.X (current)

CHR --> 1 pc | hEXr3 --> 15 pc | CCR1009-7G --> 2 pc | CCR-1009-8G --> 3 pc |
wAPac --> 30 pc | SXT5Lite --> 5 pc | SXT5 --> 5 pc | SXT5ac --> 2 pc |
Metal5ac --> 1 pc | RB2011 --> 6 pc

Who is online

Users browsing this forum: No registered users and 1 guest