Community discussions

  • 1
  • 2
  • 3
  • 4
  • 5
  • 12
 
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1395
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.43rc [release candidate] is released!

Thu Apr 26, 2018 10:27 am

Version 6.43rc5 has been released.

Before an upgrade:
1) Remember to make backup/export files before an upgrade and save them on another storage device;
2) Make sure the device will not lose power during upgrade process;
3) Device has enough free storage space for all RouterOS packages to be downloaded.

Changes since previous rc release:

*) ipsec - fixed policies becoming invalid if added after a disabled policy;
*) led - added "dark-mode" functionality for hAP ac and hAP ac^2 devices;
*) lte - allow to execute concurrent internal AT commands;
*) lte - improved r11e-LTE and r11e-LTE-US dialling process;
*) lte - improved reading of SMS message after entering running state;
*) ssh - disconnect all active connections when router gets rebooted or turned off;
*) tr069-client: - fixed setting of "DeviceInfo.ProvisioningCode" parameter;
*) wireless - fixed packet processing when "static-algo-0=40bit-wep" is being used (introduced in v6.42);
*) wireless - improved wireless throughput on hAP ac^2 and cAP ac;

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as expected or after crash.

Note that release candidate versions are published strictly for testing purposes and should not be used on production routers.
 
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1395
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.43rc [release candidate] is released!

Thu Apr 26, 2018 10:28 am

Please note that this rc release includes potential fix for wireless performance problems on RouterBOARD hAP ac^2 and cAP ac.

Please upgrade and test. Report results back to support@mikrotik.com if you still experience problems even after an upgrade.

"wireless - improved wireless throughput on hAP ac^2 and cAP ac"
 
Traveller
just joined
Posts: 24
Joined: Thu Apr 05, 2018 10:12 am

Re: v6.43rc [release candidate] is released!

Thu Apr 26, 2018 10:59 am

Many thanks for the support of the hap ac^2 :) . My hap ac^2 updating and rebooting correctly.
 
Simono
newbie
Posts: 49
Joined: Tue Mar 20, 2018 9:41 am

Re: v6.43rc [release candidate] is released!

Thu Apr 26, 2018 11:24 am

Waiting for this
*) wireless - improved wireless throughput on hAP ac^2 and cAP ac;
on stable
 
mistry7
Forum Guru
Forum Guru
Posts: 1216
Joined: Tue Oct 13, 2009 11:57 am
Location: Germany

Re: v6.43rc [release candidate] is released!

Thu Apr 26, 2018 9:35 pm

looks really better for cap ac

Thanks for this, and know go on at the another construction sites

- Spectral Scan
- Nv2 or 3
 
yhfung
Member Candidate
Member Candidate
Posts: 142
Joined: Tue Nov 20, 2012 6:58 pm

Re: v6.43rc [release candidate] is released!

Fri Apr 27, 2018 3:33 pm

It is confirmed that the v6.43rc5 has been resolved the 5GHz WiFi issue on hAP ac^2. The download and upload speed can reach at least at 380Mbps for my MacBook Pro Retina 2015 and sometimes it is over 400Mbps. MikroTik Engineering Team has done a very great job this time.


However I still have problems with my 2GHz WiFi with long ping time over 100ms, I need more time to adjust the WiFi parameters in order to obtain acceptable results.

YH
 
JanezFord
Member Candidate
Member Candidate
Posts: 258
Joined: Wed May 23, 2012 10:58 am

Re: v6.43rc [release candidate] is released!

Sat Apr 28, 2018 8:10 pm

If the hap-ac2 wireless fix really works it would be very nice of mikrotik to port it back to v6.42 (.2 maybe) asap because otherwise apart from running rc in production we will have to wait for 2 or 3 months according to current release frequency.

JF
 
jarda
Forum Guru
Forum Guru
Posts: 7575
Joined: Mon Oct 22, 2012 4:46 pm

Re: v6.43rc [release candidate] is released!

Sun Apr 29, 2018 3:29 pm

Not to current only. It is necessary to implement the corrections into bugfix version!
 
msatter
Forum Guru
Forum Guru
Posts: 1082
Joined: Tue Feb 18, 2014 12:56 am
Location: Netherlands / Nīderlande

Re: v6.43rc [release candidate] is released!

Mon Apr 30, 2018 10:02 pm

I encountered a really strange problem with the address-lists. I had some trouble entering ip addresses with netmask in the past and the message was it was not a domain. I worked around it by first entering it without an netmask and add the netmask later. This occurs sometimes and I believe also in previous versions.

Now I have Mikrotik flooding my dnsserver with IP numbers because it thinks there are domain names. I have about 35.000 IP numbers in address-list so it is really bussy. :?

The message is "Couldn't add New Firewall Address-List - x.x.x.0/16 is not a valid dns name (6)"

It seems that the input of address-list is thrown out of wack and in that mode it only expects a domain name or IP address without a netmask.
Two RB760iGS (hEX S) in series. One does PPPoE/IKEv2 and the other does the rest of the tasks.
Running:
RouterOS 6.45Beta / Winbox 3.18 / MikroTik APP 1.2.5
Having an Android device, use https://github.com/M66B/NetGuard/releases (no root required)
 
jarda
Forum Guru
Forum Guru
Posts: 7575
Joined: Mon Oct 22, 2012 4:46 pm

Re: v6.43rc [release candidate] is released!

Tue May 01, 2018 12:13 am

Everywhere.
 
sindy
Forum Guru
Forum Guru
Posts: 3277
Joined: Mon Dec 04, 2017 9:19 pm

Re: v6.43rc [release candidate] is released!

Tue May 01, 2018 12:19 am

It seems that the input of address-list is thrown out of wack and in that mode it only expects a domain name or IP address without a netmask.
As I don't have 6.43rcX anywhere right now, I can only suggest you to try whether you could use an interval (
192.168.0.0-192.168.0.255
) instead of a prefix (
192.168.0.0/24
) as a workaround.
Instead of writing novels, post /export hide-sensitive. Use find&replace in your favourite text editor to systematically replace all occurrences of each public IP address potentially identifying you by a distinctive pattern such as my.public.ip.1.
 
msatter
Forum Guru
Forum Guru
Posts: 1082
Joined: Tue Feb 18, 2014 12:56 am
Location: Netherlands / Nīderlande

Re: v6.43rc [release candidate] is released!

Tue May 01, 2018 12:38 am

I have restarted the router and then it worked again with a netmask. I have restarted a few times the last two days and I had that problem also befrore an other restart.

Next time I will try your suggestion. I have also sent this to support so they can look if there is a gremlin in there.
Two RB760iGS (hEX S) in series. One does PPPoE/IKEv2 and the other does the rest of the tasks.
Running:
RouterOS 6.45Beta / Winbox 3.18 / MikroTik APP 1.2.5
Having an Android device, use https://github.com/M66B/NetGuard/releases (no root required)
 
andlommy
just joined
Posts: 21
Joined: Tue Feb 12, 2013 12:14 am

Re: v6.43rc [release candidate] is released!

Tue May 01, 2018 10:33 am

Bug #1
CHR running on 6.43rc5 on Hyper-V (Windows 10 v1803) does not recognize all network interfaces.
If CHR is configured with 2 NICs (standard NICs, not legacy) is recognizing 1 interface only. It can be first or second NIC (varies), or both nic's. rebooting the router makes it recognize nics differently.

Bug #2
CHR (tested 6.38, 6.42.1 and 6.43rc5) running on Hyper-V (Windows 10 v1803) with blank configuration introduces a latency while accessing VMs.
i.e. hyper-v host machine ip is 192.168.1.100, client machine is 192.168.1.101, some VMs sit in a private network 172.16.1.0/24, let's say 172.16.1.100, say CHR has 2 NICs - one facing production network (with IP 192.168.1.102), other facing private network (with IP 172.16.1.1)

Pings would look the following way:

192.168.1.101 --> 192.168.1.100 ==> <1ms ping, 1 gbit on iperf test
192.168.1.101 --> 192.168.1.102 ==> <1ms ping
192.168.1.101 --> 172.16.1.100 ==> fluctuating ping 1-25 ms

Don't think same behavior existed on Hyper-V v1709.
Windows VMs sitting in hyper-v if exposed to public network (via NATed vswitch or external network) does not have a latency problem (so it's not hyper-v nics, hyper-v setup, or the actual network)
 
yhfung
Member Candidate
Member Candidate
Posts: 142
Joined: Tue Nov 20, 2012 6:58 pm

Re: v6.43rc [release candidate] is released!

Tue May 01, 2018 1:14 pm

strods,

Although the 5GHz of hAP ac^2 has already been resolved for my MacBook Pro Retina 2015 (I was able to get 380Mbps), there are still some problems with other 5G ac chip. For instance my CHIWU laptop pc equipped with Intel Dual-Band Wireless-AC 3165 (download speed is only 22Mbps). I have already sent my comments and router file supout.rif to the Support for their reference. I have seen from other threads mentioning there are some incompatibility issue with Intel-based AC.

YH
 
User avatar
slimmerwifi
just joined
Posts: 13
Joined: Tue Aug 01, 2017 6:05 pm
Location: Netherlands

Re: v6.43rc [release candidate] is released!

Wed May 02, 2018 8:56 am

Upon upgrading an Cap AC from 6.40.5 to 6.34.5 through the TIK App (download install and reboot option) it bricked.

Seems to only happen if the CAP is powered over Ethernet by another CAP. The other one survived the update.

The CAP also isn't visible in Netinstall so I'll have to RMA it.

This happened to me twice now. What am I doing wrong?
We manage 50+ corporate wifi networks in the Netherlands using Mikrotik & Cloudcore equipment.
 
yhfung
Member Candidate
Member Candidate
Posts: 142
Joined: Tue Nov 20, 2012 6:58 pm

Re: v6.43rc [release candidate] is released!

Wed May 02, 2018 9:06 am

strods,

Apart from the WiFi issue on hAP ac^2, I also found another problem when hAP ac^2 was configured as PPTP VPN client to another VPN server. The latency found was very large, it is over 1000ms. That was why I browsed websites such as www.YouTube.com, the pictures popped out very slowly.

Besides hAP ac^2 has this problem, RB951 had the same problem too.
If CCR1009 or X86 RouterOS were used and configured as PPTP VPN client to a remote MikroTik VPN sever, the latency was found only 6xms using the latency/speed test site "http://speedtest.ofca.gov.hk". It was also the same as the one without VPN. I did not have any problems when the PPTP clients were set on CCR1009 or X86 RouterOS.

For details, please take a look at the following thread. I also send the same information to the Support for help.

viewtopic.php?f=2&t=133894

YH
 
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1395
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.43rc [release candidate] is released!

Thu May 03, 2018 11:17 am

Version 6.43rc6 has been released.

Before an upgrade:
1) Remember to make backup/export files before an upgrade and save them on another storage device;
2) Make sure the device will not lose power during upgrade process;
3) Device has enough free storage space for all RouterOS packages to be downloaded.

Changes since previous rc release:

*) bridge - fixed LLDP packet receiving;
*) bridge - fixed processing of fragmented packets when hardware offloading is enabled;
*) dhcpv6-relay - fixed missing configuration after reboot;
*) hotspot - fixed user authentication when queue from old session is not removed yet;
*) quickset - fixed dual radio mode detection process;
*) wireless - fixed usage of allowed signal strength values received from RADIUS;
*) wireless - improved Nv2 PtMP performance;

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as expected or after crash.

Note that release candidate versions are published strictly for testing purposes and should not be used on production routers.
 
mistry7
Forum Guru
Forum Guru
Posts: 1216
Joined: Tue Oct 13, 2009 11:57 am
Location: Germany

Re: v6.43rc [release candidate] is released!

Thu May 03, 2018 11:22 am

*) wireless - improved Nv2 PtMP performance;

Tell us more, did you work on latency?
 
yhfung
Member Candidate
Member Candidate
Posts: 142
Joined: Tue Nov 20, 2012 6:58 pm

Re: v6.43rc [release candidate] is released!

Thu May 03, 2018 11:34 am

How about the long ping time if the hAP ac^2 is configured as VPN client? Same issue also happens on RB951G with stable RouterOS v6.40.8.

The problem has been reported in viewtopic.php?f=21&t=133420&start=50#p658891, when v6.43rc5 is released.

The most update information for the long ping time issue for VPN client can be seen in the following link:

viewtopic.php?f=2&t=133894
 
eddieb
Member Candidate
Member Candidate
Posts: 123
Joined: Thu Aug 28, 2014 10:53 am
Location: Netherlands

Re: v6.43rc [release candidate] is released!

Thu May 03, 2018 11:58 am

problems should be reported to support@mikrotik.com not on this forum.
Running 6.44.3 (stable) on :
CCR1009-8G-1S (2x ipsec/l2tp site-to-site, ipsec/l2tp roadwarrior, dhcpd, dns), CRS125-24G-1S, RB1100, RB962UiGS-5HacT2HnT (10pc),
RB951, RB750GL ,RB2011UAS-RM, CHR running dude (CHR running in VirtualBox on OSX)
 
yhfung
Member Candidate
Member Candidate
Posts: 142
Joined: Tue Nov 20, 2012 6:58 pm

Re: v6.43rc [release candidate] is released!

Thu May 03, 2018 12:04 pm

problems should be reported to support@mikrotik.com not on this forum.
Already reported to the Support at support@mikrotik.com in a few days ago and got the ticket number.

So far I have not received any (human) reply from the MikroTik Official.

YH
Last edited by yhfung on Thu May 03, 2018 12:54 pm, edited 1 time in total.
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2265
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: v6.43rc [release candidate] is released!

Thu May 03, 2018 12:41 pm

*) wireless - improved Nv2 PtMP performance;

Tell us more, did you work on latency?
@mikrotik can you write more info there? viewtopic.php?f=21&t=132181
Or start new topic with this improvement? Thanks
LAN, FTTx, Wireless. ISP operator
 
yhfung
Member Candidate
Member Candidate
Posts: 142
Joined: Tue Nov 20, 2012 6:58 pm

Re: v6.43rc [release candidate] is released!

Thu May 03, 2018 4:07 pm

I got a reply from the Support and the long ping time issue has already been resolved by disabling the FastTrack function in firewall filter rules.

For details, please take a look at the following thread.
viewtopic.php?f=2&t=133894&p=659265#p658731

Thank the MikroTik Support Team for resolving my problem as quickly.

YH
 
informant
just joined
Posts: 10
Joined: Wed Jul 22, 2015 10:33 am

Re: v6.43rc [release candidate] is released!

Fri May 04, 2018 10:54 am

hi, in last version nv2 ptmp performance was already improved, what new in v6.43rc6, well entry: wireless - improved Nv2 PtMP performance; comes again in this rc?
regards
 
mlenhart
Frequent Visitor
Frequent Visitor
Posts: 83
Joined: Mon Oct 30, 2017 11:30 pm

Re: v6.43rc [release candidate] is released!

Fri May 04, 2018 4:14 pm

BUG: WiFi LED is still On, winbox and also CLI shows wireless interface as disabled. Affected HW: RB951G-2HnD with firmware 6.41.3
Supout.rif already sent to MikroTik support, Ticket#2018050422002416.

EDIT: issue is also with firmware 6.43rc6
 
bbs2web
Member Candidate
Member Candidate
Posts: 192
Joined: Sun Apr 22, 2012 6:25 pm
Location: Johannesburg, South Africa
Contact:

Re: v6.43rc [release candidate] is released!

Fri May 04, 2018 4:44 pm

CPU utilisation reduction on CCR (Tile) routers is very evident, great work guys!

RouterOS versions:
  • We only keep OS version information for the last 30 days
  • 6.41 - MPLS: 04-02 - 04-03 BGP: 04-02 - 04-09
  • 6.41.3 - MPLS: 04-03 - 04-29 BGP: 04-09 - 04-29
  • 6.42.1 - MPLS: 04-29 - current BGP: 04-29 - current


MPLS switching router (no connection tracking, no BGP):

Throughput:
Image

CPU utilisation:
Image
NB: Please ignore the CPU utilisation spike on the 26th of March, our fault...

BGP provider edge router (firewalling and filtering in accordance to MANRS):

Throughput:
Image

CPU utilisation:
Image
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8250
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: v6.43rc [release candidate] is released!

Fri May 04, 2018 5:50 pm

RouterOS versions:
  • We only keep OS version information for the last 30 days
  • 6.41 - MPLS: 04-02 - 04-03 BGP: 04-02 - 04-09
  • 6.41.3 - MPLS: 04-03 - 04-29 BGP: 04-09 - 04-29
  • 6.42.1 - MPLS: 04-29 - current BGP: 04-29 - current
JFYI: This topic is about 6.43rc
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
lomayani
just joined
Posts: 17
Joined: Sat Jun 17, 2017 7:21 am

Re: v6.43rc [release candidate] is released!

Sat May 05, 2018 1:21 pm

On this release am getting less wireless throughput per client compared to 6.42.1. My dynamic downlink ratio is 60 and in 6.42.1 i get up to 90mbps with 20MHz per client with ac radio
I tried the current release and hardly getting 50mbps with same client and same setting

One issue i see resolved is preventing one client from killing performance of other clients if is heavily downloading.
 
yhfung
Member Candidate
Member Candidate
Posts: 142
Joined: Tue Nov 20, 2012 6:58 pm

Re: v6.43rc [release candidate] is released!

Mon May 07, 2018 3:34 pm

strods,

Miner bug found on hAP ac^2, please see the board name and correct in the next release.

[admin@MikroTik] /interface wireless> /system routerboard print
routerboard: yes
board-name: hAP ac (<--This should be hAP ac^2)
model: RouterBOARD D52G-5HacD2HnD-TC
serial-number: 8D1308291FAD
firmware-type: ipq4000L
factory-firmware: 3.43
current-firmware: 6.43rc5
upgrade-firmware: 6.43rc6
 
atlanticd
newbie
Posts: 29
Joined: Thu Jun 11, 2015 6:42 pm

Re: v6.43rc [release candidate] is released!

Mon May 07, 2018 3:46 pm

hi yhfung,

On an SSH session to my hAP ac^2 I see correctly printed name:
Image

However when I use Terminal in Winbox, I can confirm that I see what you reported. I guess this is either a Winbox issue (Winbox is not able to display the special character) or a character encoding issue in Telnet.
strods,

Miner bug found on hAP ac^2, please see the board name and correct in the next release.

[admin@MikroTik] /interface wireless> /system routerboard print
routerboard: yes
board-name: hAP ac (<--This should be hAP ac^2)
model: RouterBOARD D52G-5HacD2HnD-TC
serial-number: 8D1308291FAD
firmware-type: ipq4000L
factory-firmware: 3.43
current-firmware: 6.43rc5
upgrade-firmware: 6.43rc6
 
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1395
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.43rc [release candidate] is released!

Tue May 08, 2018 11:54 am

Version 6.43rc7 has been released.

Before an upgrade:
1) Remember to make backup/export files before an upgrade and save them on another storage device;
2) Make sure the device will not lose power during upgrade process;
3) Device has enough free storage space for all RouterOS packages to be downloaded.

Changes since previous rc release:

*) capsman - allow to change "radio-name" (CLI only);
*) dhcpv4 - prevent sending out ICMP port unreachable packets;
*) dhvpv4-client - fixed DHCP client stuck in renewing state;
*) kidcontrol - allow to edit discovered devices;
*) lte - do not allow to send "at-chat" commands for configless modems;

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as expected or after crash.

Note that release candidate versions are published strictly for testing purposes and should not be used on production routers.
 
yhfung
Member Candidate
Member Candidate
Posts: 142
Joined: Tue Nov 20, 2012 6:58 pm

Re: v6.43rc [release candidate] is released!

Tue May 08, 2018 12:16 pm

Hello atlanticd,

When I use ssh to my routerboard, it can show the correct number "2" in superscript mode. However in RouterOS terminal mode, it does not. I guess the terminal mode does not support displaying characters in superscript mode.

YH
 
sindy
Forum Guru
Forum Guru
Posts: 3277
Joined: Mon Dec 04, 2017 9:19 pm

Re: v6.43rc [release candidate] is released!

Tue May 08, 2018 12:48 pm

When I use ssh to my routerboard, it can show the correct number "2" in superscript mode. However in RouterOS terminal mode, it does not. I guess the terminal mode does not support displaying characters in superscript mode.
To be precise, it is not a 2 in superscript, it is a unicode codepoint 0xb2. Not that knowing this would change the user experience in any way :-)
Instead of writing novels, post /export hide-sensitive. Use find&replace in your favourite text editor to systematically replace all occurrences of each public IP address potentially identifying you by a distinctive pattern such as my.public.ip.1.
 
server8
Member
Member
Posts: 366
Joined: Fri Apr 22, 2011 1:27 pm

Re: v6.43rc [release candidate] is released!

Tue May 08, 2018 8:03 pm

*) wireless - improved Nv2 PtMP performance;
is it further improvement from 6.42.1?
Last edited by server8 on Tue May 08, 2018 11:59 pm, edited 1 time in total.
 
jrpaz
Frequent Visitor
Frequent Visitor
Posts: 76
Joined: Wed Jun 05, 2013 5:54 am

Re: v6.43rc [release candidate] is released!

Tue May 08, 2018 11:40 pm

DHCP Client still broke.

6.41.x was that last stable release......
 
User avatar
emils
MikroTik Support
MikroTik Support
Posts: 431
Joined: Thu Dec 11, 2014 8:53 am

Re: v6.43rc [release candidate] is released!

Wed May 09, 2018 8:44 am

Please send supout.rif files to support@mikrotik.com if you are still experiencing any issues with DHCP client.
 
jrpaz
Frequent Visitor
Frequent Visitor
Posts: 76
Joined: Wed Jun 05, 2013 5:54 am

Re: v6.43rc [release candidate] is released!

Wed May 09, 2018 4:14 pm

sent
 
nescafe2002
Long time Member
Long time Member
Posts: 594
Joined: Tue Aug 11, 2015 12:46 pm
Location: Netherlands

Re: v6.43rc [release candidate] is released!

Wed May 09, 2018 10:50 pm

*) dhvpv4-client - fixed DHCP client stuck in renewing state;
Hah. Nice work on this one. I've complained to my ISP that they didn't respond to my unicast renewal request.
Turns out these requests are sent to dhcp client (mac) address instead of the dhcp server, so I have myself to blame..

Besides the "stuck in renewal state" which seem cosmetic, clients are much more prone to rogue dhcp servers which has been a major issue for me.

Now that this is fixed in rc7 and a lot of production routers suffer from this problem due to mandatory update (6.42.1), could you urge an update on current channel?
 
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1395
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.43rc [release candidate] is released!

Thu May 10, 2018 1:51 pm

Version 6.43rc11 has been released.

Before an upgrade:
1) Remember to make backup/export files before an upgrade and save them on another storage device;
2) Make sure the device will not lose power during upgrade process;
3) Device has enough free storage space for all RouterOS packages to be downloaded.

Changes since previous rc release:

*) bridge - do not allow to add same interface list to bridge more than once;
*) console - fixed type "on" and "wireless-status" LED trigger value setting (introduced in v6.43rc1);
*) dhcpv4-server - do not allow override lease "always-broadcast" value based on offer type;
*) dhcpv4-server - improved performance when "rate-limit" and/or "address-list" setting is present;
*) dhcpv6-server - added initial dynamic simple queue support;
*) filesystem - fixed situation when filesystem goes into read-only mode on device with NAND type memory;
*) filesystem - improved software crash handling on devices with FLASH type memory;
*) interface - fixed "built-in=no" parameter for manually created interface lists;
*) interface - fixed "dynamic" built-in interface list behavior;
*) interface - fixed interface list which include/exclude another list;
*) interface - fixed interface list which include disabled member;
*) interface - fixed situation when router did reboot due to critical program crash (introduced in v6.42);
*) interface - improved reliability on dynamic interface handling;
*) lte - added extended signal information for Quectel LTE EP06 modem;
*) lte - improved LTE communication process on MMIPS platform devices;
*) routerboard - properly represent board name for hAP ac^2;
*) switch - added support for port isolation by switch chip (CLI only);
*) tile - fixed Ethernet interfaces becoming unresponsive;
*) wireless - do not disconnect clients when WDS master connects with MAC address "00:00:00:00:00:00";

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as expected or after crash.

Note that release candidate versions are published strictly for testing purposes and should not be used on production routers.
 
User avatar
BartoszP
Forum Guru
Forum Guru
Posts: 1694
Joined: Mon Jun 16, 2014 1:13 pm
Location: Poland

Re: v6.43rc [release candidate] is released!

Thu May 10, 2018 2:52 pm

....
*) bridge - do not allow to add same interface list to bridge more than once;
....
Asking without checking ... is it possible to add interface to the bridge and a list containing this interface? What then if it is possible?
Real admins use real keyboards.
 
User avatar
artz
MikroTik Support
MikroTik Support
Posts: 88
Joined: Tue Oct 17, 2017 5:51 pm
Location: Riga
Contact:

Re: v6.43rc [release candidate] is released!

Thu May 10, 2018 3:05 pm

With RouterOS v6.43rc11 it is possible to do port isolation on devices with a switch chip, this includes CRS3xx as well.
Example can be found here:
https://wiki.mikrotik.com/wiki/Manual:S ... _isolation
 
msatter
Forum Guru
Forum Guru
Posts: 1082
Joined: Tue Feb 18, 2014 12:56 am
Location: Netherlands / Nīderlande

Re: v6.43rc [release candidate] is released!

Thu May 10, 2018 4:02 pm

I had good hope my ticket (Ticket#2018042122002234) would be resolved in this version but it is not. Setting Neighbors to !Dynamic still pokes my Dail-on-Demand connection and won't let it go to sleep when the time-out is there.

When I look in interfaces - interface lists I don't see any content in the defined names and looking in the Neighbors list I see a other Mikrotik device but not the Winbox that is running. Once I did see the Winbox and it had the MAC 00:00:00:00:00:00

So I will continue to use my manual generated Interface List to give the L2TP connection a rest when not needed.
Two RB760iGS (hEX S) in series. One does PPPoE/IKEv2 and the other does the rest of the tasks.
Running:
RouterOS 6.45Beta / Winbox 3.18 / MikroTik APP 1.2.5
Having an Android device, use https://github.com/M66B/NetGuard/releases (no root required)
 
jriera
just joined
Posts: 9
Joined: Tue Feb 14, 2012 3:14 am

Re: v6.43rc [release candidate] is released!

Fri May 11, 2018 3:31 am

*) tile - fixed Ethernet interfaces becoming unresponsive;

I have a very strange problem with a CCR1072. Suddenly there are IP addresses that stop responding, some work and others do not... within the same broadcast (L2) -no routing apply-. There is no problem of firewall or similar, by ARP the MAC is seen, but communication is simply lost... until a reboot is made and everything works again. It has happened to me twice in the last week. With the 6.42.1. Does this changelog correct this problem or similar?

The problem happens in an 802.3ad bonding interface with vlans on it. At the other end there is a CRS317-1G-16S switch. Even if I restart the switch, it does not recover the communication... I must restart the CCR1072.
 
diablothebest
newbie
Posts: 27
Joined: Fri May 20, 2016 11:07 pm

Re: v6.43rc [release candidate] is released!

Fri May 11, 2018 9:04 am

After update to 6.43rc11 My Kodi player on Raspberry could't connect to Synology NAS via NFS or SMB!
 
kez
newbie
Posts: 39
Joined: Tue Jul 05, 2005 4:13 am

Re: v6.43rc [release candidate] is released!

Sat May 12, 2018 5:15 pm

*) dhcpv6-server - added initial dynamic simple queue support;
Hello, strods
We are trying to migrate our GPON customers connection from PPPoE to IPoE and doing fews tests.
One of your problems it's IPv6 queue and now this update can help us.
However, is there any way to create the same queue for IPv4 and IPv6 via DHCP?
 
TOD
just joined
Posts: 1
Joined: Tue Mar 13, 2018 10:46 pm

Re: v6.43rc [release candidate] is released!

Sun May 13, 2018 5:51 am

After updating RB750Gr3 to 6.43rc11, I noticed that all port on local bridge became isolated to each other. Disabling HW offloading on bridge ports solve this problem, but I prefer to rollback to 6.43rc6 with HW offloading enabled.
 
User avatar
Xymox
Member
Member
Posts: 379
Joined: Thu Jan 21, 2010 5:04 pm
Location: Phoenix, Arizona US
Contact:

Re: v6.43rc [release candidate] is released!

Mon May 14, 2018 9:24 pm

I updated a CCR a 2011 and a mAP from 41.5 to RC11.. This addressed all the issues *I* had with 42.x...

REENABLE NETWATCH
I use Netwatch to do a large number of things including sending alerts and changing LEDs based a scripts triggered by Netwatch.

THIS ENTIRE FEATURE WAS TAKEN AWAY IN 42 AND MUST BE PUT BACK
 
diablothebest
newbie
Posts: 27
Joined: Fri May 20, 2016 11:07 pm

Re: v6.43rc [release candidate] is released!

Mon May 14, 2018 10:26 pm

I have issue with bridge on RB750Gr3 (hEX) too. Downgrade to CURRENT channel at this moment...
 
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1395
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: v6.43rc [release candidate] is released!

Tue May 15, 2018 7:35 am

Version 6.43rc12 has been released.

Before an upgrade:
1) Remember to make backup/export files before an upgrade and save them on another storage device;
2) Make sure the device will not lose power during upgrade process;
3) Device has enough free storage space for all RouterOS packages to be downloaded.

Changes since previous rc release:

*) bridge - fixed bridge hw-offloading on MMIPS devices (introduced in v6.43rc10);
*) crs3xx - fixed packet forwarding on SFP+ interfaces (introduced in v6.43rc11);
*) dhcpv4-server - fixed situation when router did reboot due to critical program crash (introduced in v6.43rc);
*) ipsec - improved reliability on IPsec hardware encryption for ARM devices except RB1100Dx4;
*) lte - use "/32" address for the Passthrough feature when R11e-LTE module is used;
*) wireless - added option for RADUS "called-station-id" format selection (CLI only);

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as expected or after crash.

Note that release candidate versions are published strictly for testing purposes and should not be used on production routers.
 
antonsb
MikroTik Support
MikroTik Support
Posts: 187
Joined: Sun Jul 24, 2016 3:12 pm
Location: Riga, Latvia

Re: v6.43rc [release candidate] is released!

Tue May 15, 2018 11:11 am

After update to 6.43rc11 My Kodi player on Raspberry could't connect to Synology NAS via NFS or SMB!
Please provide more information about this issue to support@mikrotik.com
  • 1
  • 2
  • 3
  • 4
  • 5
  • 12

Who is online

Users browsing this forum: No registered users and 1 guest