Community discussions

 
pe1chl
Forum Guru
Forum Guru
Posts: 5574
Joined: Mon Jun 08, 2015 12:09 pm

Re: v6.43rc [release candidate] is released!

Wed Aug 22, 2018 5:04 pm

hi guys, it seems to me that it is still not possible to change the date format in dd / mm / yyyy. It would be very useful as I also work with userman reports.
Does anyone have a solution?
thank you
Valerio
I agree with that, it should be possible to have a system setting that changes the date format everywhere, but it would be feature request not something for the v6.43rc topic.
 
tigro11
Frequent Visitor
Frequent Visitor
Posts: 68
Joined: Tue Feb 20, 2018 12:31 am

Re: v6.43rc [release candidate] is released!

Wed Aug 22, 2018 5:09 pm

very strange, now all the devices have the ability to change the format of the date ....
I am amazed that until now nobody has raised the problem
 
S4bulba
just joined
Posts: 12
Joined: Mon May 07, 2018 12:18 am

Re: v6.43rc [release candidate] is released!

Thu Aug 23, 2018 12:07 am

Version 6.43rc56 as well as version 6.43rc51 are good builds for 951Ui-2nD.WAN PPPoE stability , good wireless signal for what i use in my house.No problems for a casual SOHO user.
Over & Out !
 
diablothebest
newbie
Posts: 27
Joined: Fri May 20, 2016 11:07 pm

Re: v6.43rc [release candidate] is released!

Thu Aug 23, 2018 8:15 pm

I lose my UserManager database on last RC!
 
diablothebest
newbie
Posts: 27
Joined: Fri May 20, 2016 11:07 pm

Re: v6.43rc [release candidate] is released!

Thu Aug 23, 2018 8:17 pm

Lost all userman data on last RC...
 
freemannnn
Long time Member
Long time Member
Posts: 655
Joined: Sun Oct 13, 2013 7:29 pm

Re: v6.43rc [release candidate] is released!

Thu Aug 23, 2018 8:52 pm

very strange, now all the devices have the ability to change the format of the date ....
I am amazed that until now nobody has raised the problem
viewtopic.php?t=134098
 
User avatar
emils
MikroTik Support
MikroTik Support
Posts: 463
Joined: Thu Dec 11, 2014 8:53 am

Re: v6.43rc [release candidate] is released!

Fri Aug 24, 2018 10:12 am

Version 6.43rc64 has been released.

Before an upgrade:
1) Remember to make backup/export files before an upgrade and save them on another storage device;
2) Make sure the device will not lose power during upgrade process;
3) Device has enough free storage space for all RouterOS packages to be downloaded.

MAJOR CHANGES IN v6.43:
----------------------
!) api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login);
!) backup - do not encrypt backup file unless password is provided;
!) btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
!) cloud - added IPv6 support;
!) cloud - added support for licensed CHR instances (including trial);
!) cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after installation process);
!) mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
!) radius - use MS-CHAPv2 for "login" service authentication;
!) romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
!) security - fixed vulnerabilities CVE-2018-1156, CVE-2018-1157, CVE-2018-1158, CVE-2018-1159;
!) webfig - improved authentication process;
!) winbox - improved authentication process excluding man-in-the-middle possibility;
!) winbox - minimal required version is v3.15;
----------------------


Other changes in this release:

*) bridge - added an option to manually specify ports that have a multicast router (CLI only);
*) bridge - added a warning when untrusted port receives a DHCP Server message when DCHP Snooping is enabled;
*) bridge - added more options to fine-tune IGMP Snooping enabled bridges (CLI only);
*) bridge - added support for DHCP Option 82 (CLI only);
*) bridge - added support for DHCP Snooping (CLI only);
*) bridge - added support for IGMP Snooping fast-leave feature (CLI only);
*) cloud - close local UDP port if no activity;
*) console - made "once" parameter mandatory when using "as-value" on "monitor" commands;
*) console - removed automatic swapping of "from=" and "to=" in "for" loops;
*) crs326/crs328 - fixed packet forwarding when port changes states with IGMP Snooping enabled;
*) crs3xx - added hardware support for DHCP Snooping and Option 82;
*) crs3xx - fixed packet forwarding when "frame-type" is changed (introduced in v6.43rc51);
*) crs3xx - fixed SwOS config import;
*) defconf - fixed default configuration for RBSXTsq5nD;
*) dhcpv6-client - fixed false invalid flag (introduced in v6.43rc56);
*) fetch - added "as-value" output format;
*) fetch - fixed address and DNS verification in certificates;
*) health - added missing parameters from export;
*) ipsec - added warning messages for incorrect peer configuration;
*) ipsec - improved stability when using IPsec with disabled route cache;
*) leds - fixed LED behaviour when bonding is configured on SFP+ interfaces;
*) lte - added "sector-id" to info command;
*) lte - fixed SIM7600 series module support with newer device IDs;
*) ppp - added support for Alfa Network U4G modem;
*) rb3011 - added IPsec hardware acceleration support;
*) snmp - added EAP identity to CAPsMAN registration table;
*) supout - added monitored bridge VLAN table to supout file;
*) switch - added CPU Flow Control settings for devices with a Atheros8227, QCA8337, Atheros8327, Atheros7240 or Atheros8316 switch chips;
*) tr069-client - use SNI extension for HTTPS;
*) ups - improved UPS serial parsing stability;
*) w60g - added "beamforming-event" stats counter;
*) w60g - fixed random disconnects;
*) w60g - general stability and performance improvements;
*) wireless - accept only valid path for sniffer output file parameter;
*) wireless - added "czech republic 5.8" regulatory domain information;
*) wireless - added "etsi2" regulatory domain information;
*) wireless - added option to disable PMKID for WPA2;
*) wireless - updated "czech republic" regulatory domain information;

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as expected or after crash.

Note that release candidate versions are published strictly for testing purposes and should not be used on production routers.
 
nescafe2002
Long time Member
Long time Member
Posts: 615
Joined: Tue Aug 11, 2015 12:46 pm
Location: Netherlands

Re: v6.43rc [release candidate] is released!

Fri Aug 24, 2018 11:07 am

*) rb3011 - added IPsec hardware acceleration support;

That was.. unexpected! :D
 
zyzelis
Member Candidate
Member Candidate
Posts: 212
Joined: Sun Apr 08, 2012 9:25 pm

Re: v6.43rc [release candidate] is released!

Fri Aug 24, 2018 11:26 am

Dear Mikrotik stuff,
please add dhcp option82 to dhcp server
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 5913
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: v6.43rc [release candidate] is released!

Fri Aug 24, 2018 11:32 am

Already possible with RADIUS server.
 
bennyh
Frequent Visitor
Frequent Visitor
Posts: 69
Joined: Fri Mar 03, 2017 12:37 pm

Re: v6.43rc [release candidate] is released!

Fri Aug 24, 2018 12:23 pm

*) rb3011 - added IPsec hardware acceleration support;
That was.. unexpected! :D
very-very-very-very big thanks for the Miki stuff if it works :D
If they fix the web proxy ipv6 website support too that will makes me very happy :D
 
nkourtzis
Member Candidate
Member Candidate
Posts: 202
Joined: Tue Dec 11, 2012 12:56 am
Location: Greece

Re: v6.43rc [release candidate] is released!

Fri Aug 24, 2018 12:55 pm

*) rb3011 - added IPsec hardware acceleration support;

That was.. unexpected! :D

And VERY VERY welcome! Thanks Mktik!
Passionate about networks
Enthusiastic about Mikrotik
MTCNA | MTCRE | MTCINE

No trees were killed to send this message,
but a large number of electrons were terribly inconvenienced.
 
zyzelis
Member Candidate
Member Candidate
Posts: 212
Joined: Sun Apr 08, 2012 9:25 pm

Re: v6.43rc [release candidate] is released!

Fri Aug 24, 2018 1:01 pm

Already possible with RADIUS server.
Yes i know that.
But to keep radius only for option82 not very smart. isn't?
 
nkourtzis
Member Candidate
Member Candidate
Posts: 202
Joined: Tue Dec 11, 2012 12:56 am
Location: Greece

Re: v6.43rc [release candidate] is released!

Fri Aug 24, 2018 1:20 pm

The winbox behaviour where winbox closes upon reconnecting to a previously broken connection, is again here since v3.16. It occurs not always, but quite often. Mktik, can you please look into it?

Another issue: I am trying to connect to a device via RoMON which runs over a EoIP connection (L2 only, not bridged, no IPs) which is established over a L2TP tunnel. Even though the L2TP tunnel is quite stable, winbox cannot stay connected for more than a few seconds at a time. Actually, winbox opens the RoMON connection, but any list (say, interfaces) shows up empty and after a few seconds the window closes. Any ideas?
Passionate about networks
Enthusiastic about Mikrotik
MTCNA | MTCRE | MTCINE

No trees were killed to send this message,
but a large number of electrons were terribly inconvenienced.
 
gwartass
just joined
Posts: 6
Joined: Tue Aug 18, 2015 5:28 pm

Re: v6.43rc [release candidate] is released!

Fri Aug 24, 2018 3:13 pm

*) wireless - added "czech republic 5.8" regulatory domain information;
*) wireless - updated "czech republic" regulatory domain information;

Is it what I mean? So now we'll have two czech 5GHz ranges now - one for traditional channels and second for channels over 5700 which can have max transmit power 20dBi only?
If yes, It's great! Because now I have big problem if I have the wireless link calculated for 30dBi and DFS switches to channel over 5700 and 20dBi..
 
User avatar
eworm
Member
Member
Posts: 358
Joined: Wed Oct 22, 2014 9:23 am
Location: Oberhausen, Germany
Contact:

Re: v6.43rc [release candidate] is released!

Fri Aug 24, 2018 3:33 pm

[admin@MikroTik] > :put [/tool fetch https://www.eworm.de/ip/ output=user as-value ]
data=80.133.168.147;downloaded=0;duration=00:00:01;status=finished
Finally we can fetch data without writing and reading a file. Thanks a lot!

Looks like it's required to cut the data part, though... Or is there a way to put the data only into a variable?
Manage RouterOS scripts and extend your devices' functionality: RouterOS Scripts
 
User avatar
Jotne
Forum Guru
Forum Guru
Posts: 1241
Joined: Sat Dec 24, 2016 11:17 am
Location: Magrathean

Re: v6.43rc [release candidate] is released!

Fri Aug 24, 2018 3:34 pm

*) rb3011 - added IPsec hardware acceleration support;
Maybe we could have some hope that RB750Gr3 would get HW support sooooon. :mrgreen:
 
How to use Splunk to monitor your MikroTik Router

MikroTik->Splunk
 
 
User avatar
eworm
Member
Member
Posts: 358
Joined: Wed Oct 22, 2014 9:23 am
Location: Oberhausen, Germany
Contact:

Re: v6.43rc [release candidate] is released!

Fri Aug 24, 2018 3:36 pm

*) rb3011 - added IPsec hardware acceleration support;
Maybe we could have some hope that RB750Gr3 would get HW support sooooon. :mrgreen:
It has support for harware ipsec for a long time...
Manage RouterOS scripts and extend your devices' functionality: RouterOS Scripts
 
sindy
Forum Guru
Forum Guru
Posts: 3781
Joined: Mon Dec 04, 2017 9:19 pm

Re: v6.43rc [release candidate] is released!

Fri Aug 24, 2018 3:38 pm

Maybe we could have some hope that RB750Gr3 would get HW support sooooon. :mrgreen:
RB750 Gr3 does have hardware acceleration of IPsec ever since the first release. What it does not have is "hardware acceleration" of VLAN handling on the switch chip.
Instead of writing novels, post /export hide-sensitive. Use find&replace in your favourite text editor to systematically replace all occurrences of each public IP address potentially identifying you by a distinctive pattern such as my.public.ip.1.
 
mkx
Forum Guru
Forum Guru
Posts: 2610
Joined: Thu Mar 03, 2016 10:23 pm

Re: v6.43rc [release candidate] is released!

Fri Aug 24, 2018 3:55 pm

What it does not have is "hardware acceleration" of VLAN handling on the switch chip.
Unfortunately this is true for most devices, some of them have quite a decent switch chip built in.
BR,
Metod
 
User avatar
eworm
Member
Member
Posts: 358
Joined: Wed Oct 22, 2014 9:23 am
Location: Oberhausen, Germany
Contact:

Re: v6.43rc [release candidate] is released!

Fri Aug 24, 2018 3:56 pm

[admin@MikroTik] > :put [/tool fetch https://www.eworm.de/ip/ output=user as-value ]
data=80.133.168.147;downloaded=0;duration=00:00:01;status=finished
Finally we can fetch data without writing and reading a file. Thanks a lot!

Looks like it's required to cut the data part, though... Or is there a way to put the data only into a variable?
[admin@MikroTik] > :global test
[admin@MikroTik] > :set test [ / tool fetch https://www.eworm.de/ip/ output=user as-value ]
[admin@MikroTik] > :put [ :pick $test 0 ]
80.133.168.147
Works!
Thanks Mikrotik!

(BTW, what the hell make the formatting go nuts?)
Manage RouterOS scripts and extend your devices' functionality: RouterOS Scripts
 
mkx
Forum Guru
Forum Guru
Posts: 2610
Joined: Thu Mar 03, 2016 10:23 pm

Re: v6.43rc [release candidate] is released!

Fri Aug 24, 2018 3:59 pm

Never mind.
BR,
Metod
 
User avatar
emils
MikroTik Support
MikroTik Support
Posts: 463
Joined: Thu Dec 11, 2014 8:53 am

Re: v6.43rc [release candidate] is released!

Fri Aug 24, 2018 4:00 pm

eworm, proper syntax would be:
:local test ([tool fetch url="https://www.eworm.de/ip" output=user as-value]->"data");
:put $test;

https://wiki.mikrotik.com/wiki/Manual:T ... a_variable
 
User avatar
eworm
Member
Member
Posts: 358
Joined: Wed Oct 22, 2014 9:23 am
Location: Oberhausen, Germany
Contact:

Re: v6.43rc [release candidate] is released!

Fri Aug 24, 2018 4:03 pm

eworm, proper syntax would be:
:local test ([tool fetch url="https://www.eworm.de/ip" output=user as-value]->"data");
:put $test;

https://wiki.mikrotik.com/wiki/Manual:T ... a_variable
Even better! Thanks a lot!
Manage RouterOS scripts and extend your devices' functionality: RouterOS Scripts
 
User avatar
osc86
newbie
Posts: 46
Joined: Wed Aug 09, 2017 1:15 pm

Re: v6.43rc [release candidate] is released!

Fri Aug 24, 2018 4:04 pm

I lost all ipsec connections after updating to rc64 because of a bug in peer profiles.

Image
 
User avatar
emils
MikroTik Support
MikroTik Support
Posts: 463
Joined: Thu Dec 11, 2014 8:53 am

Re: v6.43rc [release candidate] is released!

Fri Aug 24, 2018 4:12 pm

osc86, we are aware of the issue. It will be fixed until 6.43 is released in current release channel.
 
sindy
Forum Guru
Forum Guru
Posts: 3781
Joined: Mon Dec 04, 2017 9:19 pm

Re: v6.43rc [release candidate] is released!

Fri Aug 24, 2018 4:18 pm

(BTW, what the hell make the formatting go nuts?)
You have to use preview and add some empty lines before the [code] ones where necessary.
Instead of writing novels, post /export hide-sensitive. Use find&replace in your favourite text editor to systematically replace all occurrences of each public IP address potentially identifying you by a distinctive pattern such as my.public.ip.1.
 
User avatar
osc86
newbie
Posts: 46
Joined: Wed Aug 09, 2017 1:15 pm

Re: v6.43rc [release candidate] is released!

Fri Aug 24, 2018 8:07 pm

osc86, we are aware of the issue. It will be fixed until 6.43 is released in current release channel.
Something must have been changed with ipsec processing in rc64. No traffic is passing through the tunnels.
I moved back to 56, where everything works fine.
 
msatter
Forum Guru
Forum Guru
Posts: 1177
Joined: Tue Feb 18, 2014 12:56 am
Location: Netherlands / Nīderlande

Re: v6.43rc [release candidate] is released!

Fri Aug 24, 2018 8:27 pm

osc86, we are aware of the issue. It will be fixed until 6.43 is released in current release channel.
It would be nice if that would also be communicated in the changelog if something gets broken in the process and there is knowledge about that. Preferable also in red to warn.
Saves downgrades for some who are using that specific feature.
Two RB760iGS (hEX S) in series. One does PPPoE and both do IKEv2.
Running:
RouterOS 6.46Beta / Winbox 3.19 / MikroTik APP 1.3.1
Having an Android device, use https://github.com/M66B/NetGuard/releases (no root required)
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 5913
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: v6.43rc [release candidate] is released!

Fri Aug 24, 2018 8:50 pm

osc86, we are aware of the issue. It will be fixed until 6.43 is released in current release channel.
Something must have been changed with ipsec processing in rc64. No traffic is passing through the tunnels.
I moved back to 56, where everything works fine.
Contact support with attached supout file.
 
JimmyNyholm
Member Candidate
Member Candidate
Posts: 249
Joined: Mon Apr 25, 2016 2:16 am
Location: Sweden

Re: v6.43rc [release candidate] is released!

Fri Aug 24, 2018 9:10 pm

And what about making radius login scheme selectable. chap for people who use static shit that can be challenged pap for us who only use one time passwords.
 
JimmyNyholm
Member Candidate
Member Candidate
Posts: 249
Joined: Mon Apr 25, 2016 2:16 am
Location: Sweden

Re: v6.43rc [release candidate] is released!

Fri Aug 24, 2018 9:12 pm

And what about making radius login scheme selectable. chap for people who use static shit that can be challenged pap for us who only use one time passwords. And therefore Inherrently dosen't have anything to do a challenge on. (CHAP is unusable in this case)
 
User avatar
kometchtech
Member Candidate
Member Candidate
Posts: 194
Joined: Sat Jun 15, 2013 4:25 am
Location: Japan
Contact:

Re: v6.43rc [release candidate] is released!

Sat Aug 25, 2018 3:53 am

I updated to rc64, but it seems I can not communicate with ipv6. There was no problem with at least rc56.
We used netinstall to reintroduce rc64, but the situation has not changed.
--
Routerboard Users Group JP
http://www.rb-ug.jp/
CCR1009-8G-1S-1S+, RB750Gr3, CRS226-24G-2S+, RB850Gx2, RB960PGS, CRS317-1G-16S+,
RB2011UAS, CRS125-24G-1S, RB962UiGS-5HacT2HnT, CRS212-1G-10S-1S+, RB3011UiAS
 
nicob
just joined
Posts: 3
Joined: Tue Apr 11, 2017 5:11 pm

Re: v6.43rc [release candidate] is released!

Sun Aug 26, 2018 2:06 pm

I updated to rc64, but it seems I can not communicate with ipv6. There was no problem with at least rc56.
Same problem here, I updated from rc51 to rc64 and now the mikrotik does not seems to forward ipv6 packets anymore.
 
huntermic
newbie
Posts: 35
Joined: Wed Oct 26, 2016 3:42 pm

Re: v6.43rc [release candidate] is released!

Mon Aug 27, 2018 12:10 pm

I updated to rc64, but it seems I can not communicate with ipv6. There was no problem with at least rc56.
Same problem here, I updated from rc51 to rc64 and now the mikrotik does not seems to forward ipv6 packets anymore.
Strange, all works fine here after upgrading to rc64
 
Aytishnikcom
just joined
Posts: 6
Joined: Wed Jan 29, 2014 10:14 pm

Re: v6.43rc [release candidate] is released!

Mon Aug 27, 2018 9:47 pm

*) rb3011 - added IPsec hardware acceleration support;
VERY VERY welcome! Thanks Mktik!
 
bennyh
Frequent Visitor
Frequent Visitor
Posts: 69
Joined: Fri Mar 03, 2017 12:37 pm

Re: v6.43rc [release candidate] is released!

Tue Aug 28, 2018 7:57 am

*) rb3011 - added IPsec hardware acceleration support;
VERY VERY welcome! Thanks Mktik!
Has anybody tried it? Any positive changes? Are CPU loads lower? Is it stable?
 
User avatar
emils
MikroTik Support
MikroTik Support
Posts: 463
Joined: Thu Dec 11, 2014 8:53 am

Re: v6.43rc [release candidate] is released!

Tue Aug 28, 2018 12:05 pm

Has anybody tried it? Any positive changes? Are CPU loads lower? Is it stable?
IPsec throughput test results will be published on the RB3011 product page in the next few days. Currently one user has reported a kernel failure caused by the new hardware acceleration. We are looking into it and hopefully will be able to fix it in the next release candidate version. Initial tests show approximately 4 times higher throughput compared to software encryption.
 
ivicask
Member Candidate
Member Candidate
Posts: 230
Joined: Tue Jul 07, 2015 2:40 pm
Location: Croatia, Zagreb

Re: v6.43rc [release candidate] is released!

Tue Aug 28, 2018 10:42 pm

I cant update CCR1009-7G-1C from 6.43rc51 to 6.43rc64, i click check for updates, download&install, after reboot i still have old version.Tried also manually downloading the file and puting into root and rebooting, same thing.

EDIT:I figured it , i had other router package so it failed to select proper one to install.
 
User avatar
emils
MikroTik Support
MikroTik Support
Posts: 463
Joined: Thu Dec 11, 2014 8:53 am

Re: v6.43rc [release candidate] is released!

Thu Aug 30, 2018 8:34 am

Version 6.43rc66 has been released.

Before an upgrade:
1) Remember to make backup/export files before an upgrade and save them on another storage device;
2) Make sure the device will not lose power during upgrade process;
3) Device has enough free storage space for all RouterOS packages to be downloaded.

MAJOR CHANGES IN v6.43:
----------------------
!) api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login);
!) backup - do not encrypt backup file unless password is provided;
!) btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
!) cloud - added IPv6 support;
!) cloud - added support for licensed CHR instances (including trial);
!) cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after installation process);
!) mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
!) radius - use MS-CHAPv2 for "login" service authentication;
!) romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
!) security - fixed vulnerabilities CVE-2018-1156, CVE-2018-1157, CVE-2018-1158, CVE-2018-1159;
!) webfig - improved authentication process;
!) winbox - improved authentication process excluding man-in-the-middle possibility;
!) winbox - minimal required version is v3.15;
----------------------


Changes in this release:

*) bridge - added support for BPDU Guard;
*) bridge - added support for DHCP Snooping;
*) bridge - ignore tagged BPDUs when bridge VLAN filtering is used;
*) certificate - fixed RA "server-url" setting;
*) console - added "dont-require-permissions" parameter for scripts;
*) dhcpv6-client - improved dynamic IPv6 pool addition process;
*) ipsec - added "responder" parameter for "mode-config" to allow multiple initiator configurations;
*) ipsec - fixed AES-192-CTR fallback to software AEAD on ARM devices with wireless and RB3011UiAS-RM;
*) ipsec - fixed "static-dns" value storing;
*) ipsec - improved invalid policy handling when a valid policy is uninstalled;
*) ipsec - separate phase1 proposal configuration from peer menu;
*) l2tp - allow setting "max-mtu" and "max-mru" bigger than 1500;
*) lte - fixed LTE registration in 2G/3G mode;
*) ppp - added support for Telit LM940 modem;
*) rb3011 - added IPsec hardware acceleration support;
*) snmp - fixed interface speed reporting for predefined rates;
*) supout - added "files" section to supout file;
*) switch - added CPU Flow Control settings for devices with a Atheros8227, QCA8337, Atheros8327, Atheros7240 or Atheros8316 switch chip;
*) tr069-client - allow editing of "provisioning-code" attribute;
*) userman - fixed "shared-secret" parameter requiring "sensitive" policy;
*) webfig - fixed www service becoming unresponsive;
*) winbox - added "tag-stacking" option to "Bridge/Ports";
*) winbox - fixed "bad-blocks" value presence under "System/Resources";
*) winbox - fixed "IP/IPsec/Peers" section sorting;
*) winbox - renamed "VLAN Protocol" to "EtherType" under bridge interface "VLAN" tab;
*) winbox - show "System/RouterBOARD/Mode Button" on devices that has such feature;
*) wireless - accept only valid path for sniffer output file parameter;
*) wireless - require "sniff" policy for wireless sniffer;

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as expected or after crash.

Note that release candidate versions are published strictly for testing purposes and should not be used on production routers.
 
freemannnn
Long time Member
Long time Member
Posts: 655
Joined: Sun Oct 13, 2013 7:29 pm

Re: v6.43rc [release candidate] is released!

Thu Aug 30, 2018 9:47 am

just installed latest rc to test dhcp snooping and was amazed how fast winbox connects remotely to my rb at office that i upgraded.
 
User avatar
eworm
Member
Member
Posts: 358
Joined: Wed Oct 22, 2014 9:23 am
Location: Oberhausen, Germany
Contact:

Re: v6.43rc [release candidate] is released!

Thu Aug 30, 2018 10:07 am

I updated a system from 6.42.7 to 6.43rc66, now my ipsec connections are broken... Peer configuration had a comment about wrong parameter (can't give the exact wording). Switched mode-config to "none", now setting it to "request-only" fails:
[admin@Mikrotik] > / ip ipsec peer set mode-config=request-only [ find where !dynamic ]
failure: Wrong mode-config
Manage RouterOS scripts and extend your devices' functionality: RouterOS Scripts
 
User avatar
emils
MikroTik Support
MikroTik Support
Posts: 463
Joined: Thu Dec 11, 2014 8:53 am

Re: v6.43rc [release candidate] is released!

Thu Aug 30, 2018 10:09 am

Send a supout.rif file to support@mikrotik.com
 
User avatar
eworm
Member
Member
Posts: 358
Joined: Wed Oct 22, 2014 9:23 am
Location: Oberhausen, Germany
Contact:

Re: v6.43rc [release candidate] is released!

Thu Aug 30, 2018 10:41 am

Send a supout.rif file to support@mikrotik.com
Done, Ticket#2018083022003478
Manage RouterOS scripts and extend your devices' functionality: RouterOS Scripts
 
User avatar
kometchtech
Member Candidate
Member Candidate
Posts: 194
Joined: Sat Jun 15, 2013 4:25 am
Location: Japan
Contact:

Re: v6.43rc [release candidate] is released!

Thu Aug 30, 2018 10:50 am

As usual, client PC under Routerboard can not connect with IPv6.
Also, if you try to disable dhcp-snooping or option 82 again and enable it again, it is confirmed that the command times out.

[Ticket#2018083022003334]
--
Routerboard Users Group JP
http://www.rb-ug.jp/
CCR1009-8G-1S-1S+, RB750Gr3, CRS226-24G-2S+, RB850Gx2, RB960PGS, CRS317-1G-16S+,
RB2011UAS, CRS125-24G-1S, RB962UiGS-5HacT2HnT, CRS212-1G-10S-1S+, RB3011UiAS
 
User avatar
eworm
Member
Member
Posts: 358
Joined: Wed Oct 22, 2014 9:23 am
Location: Oberhausen, Germany
Contact:

Re: v6.43rc [release candidate] is released!

Thu Aug 30, 2018 10:54 am

I updated a system from 6.42.7 to 6.43rc66, now my ipsec connections are broken... Peer configuration had a comment about wrong parameter (can't give the exact wording). Switched mode-config to "none", now setting it to "request-only" fails:
[admin@Mikrotik] > / ip ipsec peer set mode-config=request-only [ find where !dynamic ]
failure: Wrong mode-config
Worked around the issue:
/ ip ipsec mode-config add name=request responder=no system-dns=no
/ ip ipsec peer set mode-config=request [ find where !dynamic ]
So my system is up and running, but I suppose this is not how things are supposed to work.
Manage RouterOS scripts and extend your devices' functionality: RouterOS Scripts
 
User avatar
kometchtech
Member Candidate
Member Candidate
Posts: 194
Joined: Sat Jun 15, 2013 4:25 am
Location: Japan
Contact:

Re: v6.43rc [release candidate] is released!

Thu Aug 30, 2018 8:21 pm

As usual, client PC under Routerboard can not connect with IPv6.
Also, if you try to disable dhcp-snooping or option 82 again and enable it again, it is confirmed that the command times out.

[Ticket#2018083022003334]
Problems were solved by netinstalling Routerboard, which can not be connected normally from client PC under Routerboard with ipv6.
However, it is unknown whether this correspondence is satisfactory.
--
Routerboard Users Group JP
http://www.rb-ug.jp/
CCR1009-8G-1S-1S+, RB750Gr3, CRS226-24G-2S+, RB850Gx2, RB960PGS, CRS317-1G-16S+,
RB2011UAS, CRS125-24G-1S, RB962UiGS-5HacT2HnT, CRS212-1G-10S-1S+, RB3011UiAS
 
User avatar
grusu
Frequent Visitor
Frequent Visitor
Posts: 94
Joined: Tue Aug 13, 2013 7:35 am
Location: Bucharest, Romania

Re: v6.43rc [release candidate] is released!

Sat Sep 01, 2018 10:53 pm

I can't change the name of the admin user:

[admin@MikroTik] > /user set 0 name=test
failure: user name can't be changed


nor any other user.
 
dziku2
just joined
Posts: 4
Joined: Wed Aug 01, 2018 10:30 pm

Re: v6.43rc [release candidate] is released!

Sun Sep 02, 2018 11:47 am

There is a problem with 6.43RC66 on hAP AC2. My router reboot itself with info in log file: system,error,critical System rebooted because of kernel failure every half hour to 6 hours.
 
nescafe2002
Long time Member
Long time Member
Posts: 615
Joined: Tue Aug 11, 2015 12:46 pm
Location: Netherlands

Re: v6.43rc [release candidate] is released!

Sun Sep 02, 2018 1:39 pm

Can you fetch autosupout.rif from the device and send it to support?

Who is online

Users browsing this forum: No registered users and 12 guests